🇵🇱 TÜV RHEINLAND POLSKA Sp. z o. o. PL
Materials & polymersConstructionWater & wastewater
TÜV RHEINLAND POLSKA Sp. z o. o. is a laboratory accredited by PCA under number AB 904 (Zabrze, Poland). Its accreditation scope covers 375 test methods in the following areas: Materials & polymers, Construction, Water & wastewater. Test objects include: Electrical measuring instruments, automation and laboratory equipment, Medical electrical equipment, Medical electrical equipment – medical beds, Medical electrical equipment – medical beds for children. Most frequently used techniques: Method: direct measurement, Method: direct measurement, probe testing, Method: loading with force and/or mass.
At a glance
- Accreditation number: PCA AB 904
- Methods in scope: 375
- Types of test objects: 90
- Techniques used: 85
- City: Zabrze, Poland
- Accreditation number
- AB 904
- Accreditation body
- PCA
- Address
- LABORATORIUM BADAWCZE TÜV RHEINLAND POLSKA, ul. Wolności 347, 41-800 Zabrze
- City
- Zabrze, Poland
What this laboratory tests (90)
- Electrical measuring instruments, automation and laboratory equipment — 28 methods
- Medical electrical equipment — 25 methods
- Medical electrical equipment – medical beds — 25 methods
- Medical electrical equipment – medical beds for children — 24 methods
- Medical electrical equipment – operating tables — 24 methods
- Auxiliary products — 17 methods
- Childcare articles – Prams and pushchairs E — 9 methods
- Medical devices – Hoists for the transfer of disabled persons — 9 methods
- Walking aids manipulated by both arms — 9 methods
- Medical supply units — 8 methods
- Terminal units for medical gas pipeline systems — 8 methods
- Furniture – Tables E — 6 methods
- Measurement of physical quantities of consumer products E — 6 methods
- Disposable barbecues E — 5 methods
- Furniture – non-domestic seating E — 5 methods
- and 75 more
Analytical techniques used (85)
- Method: direct measurement — 76 methods
- Method: direct measurement, probe testing — 24 methods
- Method: loading with force and/or mass — 22 methods
- Method: loading with force and/or mass, probe testing, bench test — 22 methods
- Method: load test — 15 methods
- Method: stability test — 12 methods
- Method: force and/or mass loading, bench test — 10 methods
- Method: compression test — 8 methods
- Method: Temperature measurement — 6 methods
- Method: force and/or mass loading, cyclic impact test — 5 methods
- Method: measurement of linear dimensions — 5 methods
- Method: ultrasonic — 5 methods
- Method: Ball pressure test — 4 methods
- Method: compression test, impact test, free fall, impact against a 40 mm protruding threshold, descent from a 40 mm step, impact of the device against a door frame, housing deformation — 4 methods
- Method: Direct measurement — 4 methods
- and 70 more
Laboratory sections (3)
- Testing Laboratory; Poznań Medical Branch — 181 methods
- Testing Laboratory; Poznań Hardlines Branch — 177 methods
- Zabrze Branch Testing Laboratory; Non-Destructive Testing Laboratory — 17 methods
Laboratory locations
- TÜV RHEINLAND POLSKA Sp. z o. o. (main site) — ul. Wolności 347, 41-800 Zabrze
- TÜV RHEINLAND POLSKA TESTING LABORATORY — ul. Wolności 347
- Testing Laboratory — ul. Lutycka 11, 60-415 Poznań
- Poznań Hardlines Branch — ul. Lutycka 11, 60-415 Poznań
- Poznań Medical Branch — ul. Lutycka 11, 60-415 Poznań
- Zabrze Branch Testing Laboratory — ul. Wolności 347, 41-800 Zabrze
- Non-Destructive Testing Laboratory — ul. Wolności 347, 41-800 Zabrze
- Zabrze Branch Testing Laboratory; Non-Destructive Testing Laboratory
- Testing Laboratory; Poznań Hardlines Branch
- Testing Laboratory; Poznań Medical Branch
Certificate information
- Issue date
- 02.09.2026
- Issue no.
- 25
Accreditation scope — test methods (375)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Testing Laboratory; Poznań Hardlines Branch | |||||
| 1 | High chairs for children E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 14988 | |
| 2 | High chairs for children E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, cyclic impact test | PN-EN 14988 | |
| 3 | High chairs for children E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct, probe test Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
PN-EN 14988 | ||
| 4 | Work tables and desks E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 527-1 | PN-EN 527-2 | |
| 5 | Work tables and desks E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, cyclic impact test | PN-EN 527-1 | PN-EN 527-2 | |
| 6 | Work tables and desks E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
PN-EN 527-1 | PN-EN 527-2 | ||
| 7 | Storage furniture E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 16121 | |
| 8 | Storage furniture E | Geometric dimensions Range (1 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 16121 | |
| 9 | Storage furniture E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, cyclic impact test | PN-EN 16121 | |
| 10 | Impact attenuating surfacing E | Critical fall height HIC Range (0 - 4000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: headform test | PN-EN 1177 | |
| 11 | Playground equipment − swings E | Impact attenuation of swing seats Range (0 - 200) g Range (0 - 1000) N/cm2 Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: headform test | PN-EN 1176-2 | |
| 12 | Playground equipment − swings E | Structural strength Range Structural strength Range (0 - 4500) N (0 - 1500) kg (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, probe test | PN-EN 1176-2 | |
| 13 | Playground equipment − swings E | Geometric dimensions Range (0 - 20000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-2 | |
| 14 | Ladders E | Geometric dimensions Range (0 - 5000) mm Range (0 - 270)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 131-1 | PN-EN 131-2 | PN-EN 131-3 | |
| 15 | Ladders E | Strength of construction deflection, torsion, strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 200) Nm Range (0 - 360)° Range (0 - 20000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 131-1 | PN-EN 131-2 | PN-EN 131-3 | |
| 16 | Furniture – chairs and tables for educational institutions E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1729-1 | PN-EN 1729-2 | |
| 17 | Furniture – chairs and tables for educational institutions E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 1729-1 | PN-EN 1729-2 | |
| 18 | Furniture – chairs and tables for educational institutions E | Structural strength Range Structural strength Range (0 - 4500) N (0 - 450) kg (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1729-1 | PN-EN 1729-2 | |
| 19 | Furniture – workbenches for laboratories in educational institutions E | Stability Range (0 - 1000) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, impact test with a striker | PN-EN 13150 | |
| 20 | Furniture – workbenches for laboratories in educational institutions E | Strength of construction deflection, strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, cyclic impact test | PN-EN 13150 | |
| 21 | Furniture – workbenches for laboratories in educational institutions E | Geometric dimensions Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement | PN-EN 13150 | |
| 22 | Domestic and kitchen storage units and worktops E | Mass of the product and its components Range (0 - 150) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: gravimetric | PN-EN 14749 | |
| 23 | Domestic and kitchen storage units and worktops E | Geometric dimensions Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement | PN-EN 14749 | |
| 24 | Domestic and kitchen storage units and worktops E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 200) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading | PN-EN 14749 | |
| 25 | Domestic and kitchen storage units and worktops E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 14749 | |
| 26 | Outdoor furniture – seating and tables for camping, domestic outdoor and public use E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 581-1 | PN-EN 581-2 | PN-EN 581-3 | |
| 27 | Outdoor furniture – seating and tables for camping, domestic outdoor and public use E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 581-1 | PN-EN 581-2 | PN-EN 581-3 | |
| 28 | Outdoor furniture – seating and tables for camping, domestic outdoor and public use E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement | PN-EN 581-1 | PN-EN 581-2 | PN-EN 581-3 | |
| 29 | Folding stools E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 14183 | |
| 30 | Folding stools E | Friction coefficient Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: indirect measurement, loading with force and/or mass | PN-EN 14183 | |
| 31 | Folding stools E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 14183 | |
| 32 | Furniture – Children's cots and cradles for domestic use E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 1130 | |
| 33 | Furniture – Children's cots and cradles for domestic use E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1130 | |
| 34 | Furniture – Children's cots and cradles for domestic use E | Geometric dimensions Range: (0 - 5000) mm (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1130 | |
| 35 | Toys E | Strength of construction strength of the product and its components, resistance to soaking Range (0 - 750) N Range (0 - 75) kg Range (0 - 360)° Range (0 - 5000) mm Range (0 - 11,5) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass and/or torque loading, probe test, bench test, soaking test | PN-EN 71-1 | |
| 36 | Toys E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Range (0 - 800) μm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, testing with a probe, small parts cylinder test, magnetic method | PN-EN 71-1 | |
| 37 | Toys E | Edge sharpness – length of tape cut Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 71-1 | |
| 38 | Toys E | Stability Range (0 - 30)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: bench test | PN-EN 71-1 | |
| 39 | Toys E | Sharpness of points Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: measurement with a test head | PN-EN 71-1 | |
| 40 | Toys – Swings, slides and similar activity toys for indoor and outdoor family domestic use E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 71-8 | |
| 41 | Toys – Swings, slides and similar activity toys for indoor and outdoor family domestic use E | Strength of construction Range (0 - 4500) N Range (0 - 1500) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 71-8 | |
| 42 | Toys – Swings, slides and similar activity toys for indoor and outdoor family domestic use E | Impact attenuation of swing seats Range (0 - 200) g Range (0 - 1000) N/cm2 Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: headform test | PN-EN 71-8 | |
| 43 | Toys – Swings, slides and similar activity toys for indoor and outdoor family domestic use E | Geometric dimensions Range (0 - 20000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 71-8 | |
| 44 | Sports and recreational equipment - Rope courses E | Geometric dimensions Range (0 - 50) m Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 15567-1 | |
| 45 | Sports and recreational equipment - Rope courses E | Strength of construction strength of the product and its components, tightening torque Range (0 - 50) kN Range (0 - 450) kg Range (0 - 200) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, probe test | PN-EN 15567-1 | |
| 46 | Sports and recreational equipment - Rope courses E | Entrapment of the head and neck, fingers, legs, whole body Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: testing with a probe | PN-EN 15567-1 | |
| 47 | Playground equipment E | Structural strength, stability Range (0 - 4500) N Range (0 - 1500) kg Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1176-1 | |
| 48 | Playground equipment E | Geometric dimensions Range (0 - 20000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1176-1 | |
| 49 | Playground equipment – slides E | Geometric dimensions Range (0 - 20000) mm(0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-3 | |
| 50 | Playground equipment – roundabouts E | Geometric dimensions Range (0 - 20000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-5 | |
| 51 | Playground equipment – rocking equipment E | Stability, lateral deflection Range (0 - 90)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, probe test | PN-EN 1176-6 | |
| 52 | Playground equipment – rocking equipment E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1176-6 | |
| 53 | Playground equipment - documentation on installation, inspection, maintenance and operation E | Geometric dimensions and completeness of marking Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-7 | |
| 54 | Playground equipment – fully enclosed play equipment E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-10 | |
| 55 | Playground equipment – spatial networks E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 1176-11 | |
| 56 | Childcare articles – Prams and pushchairs E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1888-1 | PN-EN 1888-2 | |
| 57 | Childcare articles – Prams and pushchairs E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 30)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass and/or torque loading, bench test | PN-EN 1888-1 | PN-EN 1888-2 | |
| 58 | Childcare articles – Prams and pushchairs E | Strength of construction strength of the product and its components, durability, torsion Range (0 - 1000) N Range (0 - 100) kg Range (0 - 0,34) Nm Range (0 - 360)° Range (0 - 5000) mm Range (0 - 5) km/h Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1888-1 | PN-EN 1888-2 | |
| 59 | Furniture - Children's cots and folding cots for domestic use E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Range (0 - 11) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass and/or torque loading, probe test, bench test | PN-EN 716-1 | PN-EN 716-2 | |
| 60 | Furniture - Children's cots and folding cots for domestic use E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 716-1 | PN-EN 716-2 | |
| 61 | Furniture - Children's cots and folding cots for domestic use E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe measurement | PN-EN 716-1 | PN-EN 716-2 | |
| 62 | Furniture – Bunk beds and high beds E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 747-1 | PN-EN 747-2 | |
| 63 | Furniture – Bunk beds and high beds E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 747-1 | PN-EN 747-2 | |
| 64 | Furniture – Bunk beds and high beds E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 747-1 | PN-EN 747-2 | |
| 65 | Child care articles - Changing units for domestic use E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe measurement | PN-EN 12221-1 | PN-EN 12221-2 | |
| 66 | Child care articles - Changing units for domestic use E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 12221-1 | PN-EN 12221-2 | |
| 67 | Child care articles - Changing units for domestic use E | Structural strength Range Structural strength Range (0 - 4500) N (0 - 450) kg (0 - 360)° (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 12221-1 | PN-EN 12221-2 | |
| 68 | Child care articles - Changing units for domestic use E | Temperature endurance Range (0 - 100)°C Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: bench test | PN-EN 12221-1 | PN-EN 12221-2 | |
| 69 | Non-domestic storage furniture E | Mass of the product and its components Range (0 - 150) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: gravimetric | PN-EN 16121 | PN-EN 16122 | |
| 70 | Non-domestic storage furniture E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe measurement | PN-EN 16121 | PN-EN 16122 | |
| 71 | Non-domestic storage furniture E | Stability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 16121 | PN-EN 16122 | |
| 72 | Non-domestic storage furniture E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Range (0 - 5) m/s Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 16121 | PN-EN 16122 | |
| 73 | Domestic furniture - Beds and mattresses E | Geometric dimensions Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe measurement | PN-EN 1725 | |
| 74 | Domestic furniture - Beds and mattresses E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 1725 | |
| 75 | Domestic furniture - Beds and mattresses E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 1725 | |
| 76 | Swimming pool equipment E | Geometric dimensions Range (0 - 5000) mm Range (0 - 270)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 13451-1 excluding cl. 4.8 | PN-EN 13451-2 | PN-EN 13451-3 | PN-EN 13451-4 | PN-EN 13451-6 | |
| 77 | Swimming pool equipment E | Strength of construction Range (0 - 3000) N Range (0 - 500) kg Range (0 - 270)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 13451-1 excluding cl. 4.8 | PN-EN 13451-2 | PN-EN 13451-3 | PN-EN 13451-4 | PN-EN 13451-6 | |
| 78 | Metallic and plastic materials E | Surface slip resistance Range (0 - 45)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: stability test on an inclined plane | PN-EN 13845 | |
| 79 | Consumables for printers, copiers and multifunction devices E | Capacity Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: printing of test pages | ISO/IEC 19752 | ISO/IEC 19798 | ISO/IEC 24711 | ISO/IEC 24712 | ISO/IEC 29102 | ISO/IEC 29103 | |
| 80 | Outdoor gym equipment E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 16630 | |
| 81 | Outdoor gym equipment E | Strength of construction Range (0 - 50000) N Range (0 - 2000) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 16630 | |
| 82 | Furniture – non-domestic seating E | Structural strength - strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 16139 | |
| 83 | Furniture – non-domestic seating E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 16139 | |
| 84 | Furniture – non-domestic seating E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 16139 | |
| 85 | Furniture - domestic seating E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 12520 | |
| 86 | Furniture - domestic seating E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 12520 | |
| 87 | Furniture - domestic seating E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 12520 | |
| 88 | Solid fuel fired barbecues E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1860-1 | |
| 89 | Solid fuel fired barbecues E | Strength of construction strength of the product and its components, durability Range (0 - 500) N Range (0 - 50) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1860-1 | |
| 90 | Solid fuel fired barbecues E | Temperature emitted by various parts of the appliance Range (from -50 to 800)°C Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: temperature measurement | PN-EN 1860-1 | |
| 91 | Solid fuel fired barbecues E | Stability Range (0 - 50) kg Range (0 - 45)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with mass and/or moment | PN-EN 1860-1 | |
| 92 | Firelighters used in barbecue appliances E | Consistency of firelighters Range (0 - 30) min. Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: time measurement | PN-EN 1860-3 | |
| 93 | Firelighters used in barbecue appliances E | Combustion characteristics Range (0 - 60) min. Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: time measurement | PN-EN 1860-3 | |
| 94 | Firelighters used in barbecue appliances E | Structural strength of packaging for liquid firelighters, Resistance to elevated temperature and humidity of packaging for solid firelighters Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with mass, bench test, holding in a climatic chamber | PN-EN 1860-3 | |
| 95 | Disposable barbecues E | Geometric dimensions Range: (0 - 5000) mm (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1860-4 | |
| 96 | Disposable barbecues E | Combustion characteristics Range (0- 120) min. Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: time measurement | PN-EN 1860-4 | |
| 97 | Disposable barbecues E | Temperature emitted by various parts of the appliance Range (from -50 to 800)°C Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: temperature measurement | PN-EN 1860-4 | |
| 98 | Disposable barbecues E | Stability Range (0 - 50) kg Range (0 - 45)° Method: loading with force and/or mass and/or moment Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1860-4 | ||
| 99 | Disposable barbecues E | Strength of construction strength of the product and its components, durability Range (0 - 500) N Range (0 - 50) kg Range (0 - 200) Nm Range (0 - 360)° Range (0 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1860-4 | |
| 100 | Parkour equipment E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 16899 | |
| 101 | Parkour equipment E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, testing with a probe, impact test with a striker | PN-EN 16899 | |
| 102 | Furniture fittings E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 15338 | |
| 103 | Furniture fittings E | Geometric dimensions Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement | PN-EN 15338 | |
| 104 | Furniture fittings E | Corrosion resistance Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: CH, AHT, AT | PN-EN 15338 | |
| 105 | Furniture – Domestic tables E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 12521 | |
| 106 | Furniture – Domestic tables E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 12521 | |
| 107 | Furniture – Domestic tables E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct, probe test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12521 | ||
| 108 | Furniture – Non-domestic tables E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 15372 | |
| 109 | Furniture – Non-domestic tables E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 15372 | |
| 110 | Furniture – Non-domestic tables E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct, probe test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15372 | ||
| 111 | Loft ladders E | Geometric dimensions Range: (0 - 5000) mm (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 14975 | |
| 112 | Loft ladders E | Strength of construction strength of the product and its components, durability, torsion Range (0 - 3000) N Range (0 - 300) kg Range (0 - 360)° Range (0 - 1000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 14975 | |
| 113 | Furniture – beam seating E | Geometric dimensions Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 12727 | |
| 114 | Furniture – beam seating E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 12727 | |
| 115 | Playground equipment − cableways E | Impact attenuation of swing seats Range (0 - 200) g Range (0 - 1000) N/cm2 Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: headform test | PN-EN 1176-4 | |
| 116 | Playground equipment − cableways E | Strength of construction Range (0 - 450) kg Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 1176-4 | |
| 117 | Playground equipment − cableways E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1176-4 | |
| 118 | Coatings E | Thickness of the non-magnetic coating on an Fe substrate Range (0 - 800) μm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: magnetic | PN-EN ISO 2178 | |
| 119 | Coatings E | Thickness of the non-conductive coating on an N-Fe substrate Range (0 - 800) μm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: eddy currents | PN-EN ISO 2360 | |
| 120 | Finished products, subassemblies, metals, metal alloys and their coatings E | Corrosion resistance Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
PN-EN ISO 9227 | PN-EN 60068-2-11 | ||
| 121 | Finished products, subassemblies, metals, metal alloys and their coatings E | Resistance to moisture Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
PN-EN ISO 6270-2 | ||
| 122 | Finished products, subassemblies, metals, metal alloys and their coatings E | Geometric dimensions Range (0 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN ISO 10289 | |
| 123 | Finished products, subassemblies, metals, metal alloys and their coatings E | Geometric dimensions Range (0 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1670 | |
| 124 | Child care articles – Bathing aids E | Mass of the product and its components Range (0 - 150) kg Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: gravimetric | PN-EN 17022 | |
| 125 | Child care articles – Bathing aids E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Range (0 - 800) μm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe test, magnetic method | PN-EN 17022 | |
| 126 | Child care articles – Bathing aids E | Strength of construction strength of the product and its components, resistance to soaking Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Range (0 - 11) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading, probe test, bench test, soaking test | PN-EN 17022 | |
| 127 | Child care articles – Bathing aids E | Stability Range Stability Range (0 - 750) N Stability Range (0 - 75) kg Stability Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 17022 | |
| 128 | Child care articles – Bath tubs, stands and non-free standing bathing aids E | Mass of the product and its components Range (0 - 150) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: gravimetric | PN-EN 17072 | |
| 129 | Child care articles – Bath tubs, stands and non-free standing bathing aids E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Range (0 - 800) μm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe test, magnetic method | PN-EN 17072 | |
| 130 | Child care articles – Bath tubs, stands and non-free standing bathing aids E | Stability Range (0 - 30)° Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | PN-EN 17072 | |
| 131 | Child care articles – Bath tubs, stands and non-free standing bathing aids E | Strength of construction strength of the product and its components, resistance to soaking Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Range (0 - 11) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading, probe test, bench test, soaking test | PN-EN 17072 | |
| 132 | Childcare articles – Carry cots and stands – Safety requirements and test methods E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1466 | |
| 133 | Childcare articles – Carry cots and stands – Safety requirements and test methods E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 30)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading, bench test | PN-EN 1466 | |
| 134 | Childcare articles – Carry cots and stands – Safety requirements and test methods E | Strength of construction strength of the product and its components, durability, torsion, resistance to soaking Range (0 - 1000) N Range (0 - 100) kg Range (0 - 0,34) Nm Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, testing with a probe, bench test, soaking test | PN-EN 1466 | |
| 135 | Children's furniture – Seating for children E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 17191 | |
| 136 | Children's furniture – Seating for children E | Strength of construction Range (0 - 4500) N Range (0 - 450) kg Range (0 - 0,34) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading, probe test, bench test | PN-EN 17191 | |
| 137 | Children's furniture – Seating for children E | Geometric dimensions Range: (0 - 5000) mm (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 17191 | |
| 138 | Cookware E | Resistance to mechanical washing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12875-1 | ||
| 139 | Skateparks E | Geometric dimensions Range (0 - 20000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 14974 | |
| 140 | Skateparks E | Strength of construction Range (0 - 7000) N Range (0 - 1000) kg Range (0 - 20000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, probe test | PN-EN 14974 | |
| 141 | Childcare articles – Prams and pushchairs E | Geometric dimensions Range (0 - 5000) mm Range (0 - 270)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | ASTM F 833 | 16 CFR Part 1227 | |
| 142 | Childcare articles – Prams and pushchairs E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 30)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass and/or torque loading, bench test | ASTM F 833 | 16 CFR Part 1227 | |
| 143 | Childcare articles – Prams and pushchairs E | Strength of construction strength of the product and its components, durability, torsion Range (0 - 1000) N Range (0 - 100) kg Range (0 - 0,34) Nm Range (0 - 360)° Range (0 - 5000) mm Range (0 - 5) km/h Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | ASTM F 833 | 16 CFR Part 1227 | |
| 144 | Furniture – non-domestic seating E | Structural strength - strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: force and/or mass loading, probe test, bench test, cyclic impact test | ANSI/BIFMA X5.4 (cl. 10, 14, 17) | |
| 145 | Furniture – non-domestic seating E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: direct measurement, probe testing | ANSI/BIFMA X5.4 (cl. 10, 14, 17) | |
| 146 | Furniture – Seating furniture E | Structural strength - strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1728 | |
| 147 | Furniture – Seating furniture E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement | PN-EN 1728 | |
| 148 | Furniture – Seating furniture E | Stability Range (0 - 1300) N Range (0 - 130) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 1022 | |
| 149 | Furniture – Tables E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | ANSI/BIFMA X5.5 (cl. 4, 5, 6) | |
| 150 | Furniture – Tables E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, probe test, bench test, cyclic impact test | ANSI/BIFMA X5.5 (cl. 4, 5, 6) | |
| 151 | Furniture – Tables E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct, probe test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
ANSI/BIFMA X5.5 (cl. 4, 5, 6) | ||
| 152 | Clothing storage furniture E | Stability Range (0 – 750) N Range (0 – 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Loading method with force and/or mass | ASTM F2057 | 16 CFR Part 1261 | |
| 153 | Clothing storage furniture E | Geometric dimensions Range (1 – 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement | ASTM F2057 | 16 CFR Part 1261 | |
| 154 | Furniture – panels, screens E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | ANSI/BIFMA X5.6 (cl. 5, 6, 7, 8) | |
| 155 | Furniture – panels, screens E | Strength of construction strength of the product and its components Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, probe test, bench test, cyclic impact test | ANSI/BIFMA X5.6 (cl. 5, 6, 7, 8) | |
| 156 | Furniture – panels, screens E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct, probe test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
ANSI/BIFMA X5.6 (cl. 5, 6, 7, 8) | ||
| 157 | Cutlery and table articles (cutlery products) E | Geometric dimensions Range (0 – 5000) mm Range (0 – 270) ̊ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | EN ISO 8442-1 (cl. 5.3, Annex A.1.) | |
| 158 | Cutlery and table articles (cutlery products) E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Immersion method | EN ISO 8442-1 (cl. 5.3, Annex A.1.) | |
| 159 | Cutlery and table articles (cutlery products) E | Cutting capacity Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: bench test | EN ISO 8442-5 | |
| 160 | Childcare articles – Prams and pushchairs E | Geometric dimensions Range (0 - 5000) mm Range (0 - 360)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: direct measurement, probe testing | PN-EN 1888-3 | |
| 161 | Childcare articles – Prams and pushchairs E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 30)° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass and/or torque loading, bench test | PN-EN 1888-3 | |
| 162 | Childcare articles – Prams and pushchairs E | Strength of construction strength of the product and its components, durability, torsion Range (0 - 1000) N Range (0 - 100) kg Range (0 - 6,5) Nm Range (0 - 360)° Range (0 - 5000) mm Range (0 - 8) km/h Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass, probe testing, bench test | PN-EN 1888-3 | |
| 163 | Furniture – Tables E | Stability Range (0 - 750) N Range (0 - 75) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: loading with force and/or mass | PN-EN 1730 | |
| 164 | Furniture – Tables E | Strength of construction deflection, strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, cyclic impact test | PN-EN 1730 | |
| 165 | Furniture – Tables E | Geometric dimensions Range (0 - 5000) mm Method: measurement direct Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1730 | ||
| 166 | Furniture – Control devices for reclining seating furniture and sofas E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 270)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test, probe test | PN-EN 13759 | |
| 167 | Furniture – Beds E | Stability Range (0 - 750) N Range (0 - 75) kg Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | ISO 19833 | |
| 168 | Furniture – Beds E | Strength of construction strength of the product and its components, durability Range (0 - 4500) N Range (0 - 450) kg Range (0 - 360)° Range (0 - 5000) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: force and/or mass loading, bench test | ISO 19833 | |
| 169 | Measurement of physical quantities of consumer products E | Geometric dimensions Range (0 – 20000) mm Range (0 – 270) ̊ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 170 | Measurement of physical quantities of consumer products E | Ambient temperature Range (from -20 to 60)°C Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Temperature measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 171 | Measurement of physical quantities of consumer products E | Temperature emitted by various parts of the appliance Range (from -50 to 800)°C Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Temperature measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 172 | Measurement of physical quantities of consumer products E | Ambient humidity Range (25 - 90) % Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: moisture measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 173 | Measurement of physical quantities of consumer products E | Operating time/ duration Range (0 - 60) min Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: time measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 174 | Measurement of physical quantities of consumer products E | Mass Range (0 - 150) kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: mass measurement | IP-TÜV-25 Measurement of physical quantities of consumer products | |
| 175 | Metallic and plastic materials | Surface slip resistance Range (0 - 45)° |
Method: stability test on an inclined plane | DIN 51097:1992 | |
| 176 | Mobile access and working towers made of prefabricated elements | Geometric dimensions Range (0 - 20000) mm Range (0 - 360)° |
Method: measurement of linear and angular dimensions | PN-EN 1004-1:2021-04 clauses: 7, 8, Annex A | |
| 177 | Mobile access and working towers made of prefabricated elements | Strength of structures: strength of the product and its components, deflection, torsion Range (0 - 4500) N Range (0 - 2500) kg Range (0 - 200) Nm Range (0 - 360)° Range (0 - 20000) mm |
Method: force and/or mass loading, bench test | PN-EN 1004-1:2021-04 clauses: 7, 8, Annex A | |
| Testing Laboratory; Poznań Medical Branch | |||||
| 178 | Medical electrical equipment | Power consumption Range (0,001 - 9000,0) W Range (0,001 - 9000,0) VA Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 179 | Medical electrical equipment | Voltage Range (0,001 - 900) V Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 180 | Medical electrical equipment | Current Range (0,001 - 30) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 181 | Medical electrical equipment | Legibility of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 182 | Medical electrical equipment | Durability of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Marking durability test (water, alcohol) | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 183 | Medical electrical equipment | Impedance of the protective circuit at a current of min. 25 A Range (0,001 - 2,1) Ω Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 184 | Medical electrical equipment | Leakage currents, earth leakage current, enclosure leakage current, patient leakage current, patient auxiliary current, patient leakage current (mains voltage on the applied part) Range (0 - 10) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 185 | Medical electrical equipment | Dielectric strength of the insulation Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | ||
| 186 | Medical electrical equipment | Deformation of the enclosure in the heat resistance test Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Ball pressure test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 187 | Medical electrical equipment | Creepage distances and clearances Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 188 | Medical electrical equipment | Insulation of the mains supply cord (cord anchorage and bend protection) force (0,1 - 100) N, torque torsional (0,001 - 0,35) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test and torsion test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 189 | Medical electrical equipment | Gaps in protection against mechanical hazards Range (0,1 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: measurement of linear dimensions | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 190 | Medical electrical equipment | Instability of the device in the transport position, other than during transport and as a result of horizontal and vertical forces Range (0 - 30)°, force (0,1 - 800) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 191 | Medical electrical equipment | Instability of the device during transport and other than during transport angle (0 - 30)° force (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 192 | Medical electrical equipment | Force required to set the equipment in motion Range (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 193 | Medical electrical equipment | Ability of the device to pass over a threshold Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | ||
| 194 | Medical electrical equipment | Mechanical strength of handles and other means for carrying equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 195 | Medical electrical equipment | Mechanical strength of support systems Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 196 | Medical electrical equipment | Temperature emitted by various parts of the appliance Range (-50 - 800)°C Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Temperature measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 197 | Medical electrical equipment | Resistance of the device to liquid spillage Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | ||
| 198 | Medical electrical equipment | Mechanical strength of equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test, impact test, free fall, impact against a 40 mm protruding threshold, descent from a 40 mm step, impact of the device against a door frame, housing deformation | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 199 | Medical electrical equipment | Strength of actuating parts of equipment controls Range torsional moment Range (0,001 - 6) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 200 | Medical electrical equipment | Mechanical strength of foot controls Range (0,1 - 1350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 201 | Medical electrical equipment | Electric strength of transformers Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | ||
| 202 | Medical electrical equipment | Dimensions ensuring safety in use: Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: measurement of geometric quantities and testing with probes – testing with a test finger and test hook | PN-EN 60601-1:2011 | PN-EN 60601-1:2011/A1:2014-02 | PN-EN 60601-1:2011/A12:2014-12 | PN-EN 60601-1:2011/A2:2022-03 | PN-EN 60601-1:2011/A13:2025-01 | PN-EN 60601-1-6:2010 | PN-EN 60601-1-6:2010/A1:2015-09 | PN-EN 60601-1-11:2015-09 | PN-EN 60601-1-11:2015-09/A1:2021-12 | |
| 203 | Medical electrical equipment – medical beds for children | Power consumption Range (0,001 - 9000,0) W Range (0,001 - 9000,0) VA |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 204 | Medical electrical equipment – medical beds for children | Voltage Range (0,001 - 900) V |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 205 | Medical electrical equipment – medical beds for children | Current Range (0,001 - 30) A |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 206 | Medical electrical equipment – medical beds for children | Legibility of marking | Method: Direct measurement | PN-EN 50637:2018-04 | |
| 207 | Medical electrical equipment – medical beds for children | Durability of marking | Method: Marking durability test (water, alcohol) | PN-EN 50637:2018-04 | |
| 208 | Medical electrical equipment – medical beds for children | Impedance of the protective circuit at a current of min. 25 A Range (0,001 - 2,1) Ω |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 209 | Medical electrical equipment – medical beds for children | Leakage currents, earth leakage current, enclosure leakage current, patient leakage current, patient auxiliary current, patient leakage current (mains voltage on the applied part) Range (0 - 10) A |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 210 | Medical electrical equipment – medical beds for children | Dielectric strength of the insulation Range (0,5 - 4,0) kV |
PN-EN 50637:2018-04 | ||
| 211 | Medical electrical equipment – medical beds for children | Deformation of the enclosure in the heat resistance test | Method: Ball pressure test | PN-EN 50637:2018-04 | |
| 212 | Medical electrical equipment – medical beds for children | Creepage distances and clearances | Method: direct measurement | PN-EN 50637:2018-04 | |
| 213 | Medical electrical equipment – medical beds for children | Gaps in protection against mechanical hazards Range (0,1 - 1000) mm |
Method: measurement of linear dimensions | PN-EN 50637:2018-04 | |
| 214 | Medical electrical equipment – medical beds for children | Instability of the device in the transport position, other than during transport and as a result of horizontal and vertical forces Range (0 - 30)° force (0,1 - 1100) N load (0,1 - 2200) N |
Method: stability test | PN-EN 50637:2018-04 | |
| 215 | Medical electrical equipment – medical beds for children | Instability of the device during transport and other than during transport angle (0 - 30)° force (0,1 - 350) N |
Method: stability test | PN-EN 50637:2018-04 | |
| 216 | Medical electrical equipment – medical beds for children | Force required to set the equipment in motion Range (0,1 - 350) N |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 217 | Medical electrical equipment – medical beds for children | Ability of the device to pass over a threshold | PN-EN 50637:2018-04 | ||
| 218 | Medical electrical equipment – medical beds for children | Mechanical strength of handles and other means for carrying equipment | Method: load test | PN-EN 50637:2018-04 | |
| 219 | Medical electrical equipment – medical beds for children | Mechanical strength of support systems | Method: load test | PN-EN 50637:2018-04 | |
| 220 | Medical electrical equipment – medical beds for children | Temperature emitted by various parts of the appliance Range (-50 - 800)°C |
Method: Temperature measurement | PN-EN 50637:2018-04 | |
| 221 | Medical electrical equipment – medical beds for children | Resistance of the device to liquid spillage | PN-EN 50637:2018-04 | ||
| 222 | Medical electrical equipment – medical beds for children | Mechanical strength of equipment | Method: compression test, impact test, free fall, impact against a 40 mm protruding threshold, descent from a 40 mm step, impact of the device against a door frame, housing deformation | PN-EN 50637:2018-04 | |
| 223 | Medical electrical equipment – medical beds for children | Strength of actuating parts of equipment controls Range torsional moment Range (0,001 - 6) Nm |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 224 | Medical electrical equipment – medical beds for children | Mechanical strength of foot controls Range (0,1 - 1350) N |
Method: compression test | PN-EN 50637:2018-04 | |
| 225 | Medical electrical equipment – medical beds for children | Electric strength of transformers Range (0,5 - 4,0) kV |
PN-EN 50637:2018-04 | ||
| 226 | Medical electrical equipment – medical beds for children | Angular quantities Range (0 - 360)° |
Method: direct measurement | PN-EN 50637:2018-04 | |
| 227 | Medical electrical equipment – operating tables | Power consumption Range (0,001 - 9000,0) W Range (0,001 - 9000,0) VA Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 228 | Medical electrical equipment – operating tables | Voltage Range (0,001 - 900) V Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 229 | Medical electrical equipment – operating tables | Current Range (0,001 - 30) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 230 | Medical electrical equipment – operating tables | Legibility of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 231 | Medical electrical equipment – operating tables | Durability of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Marking durability test (water, alcohol) | PN-EN IEC 60601-2-46:2025-03 | |
| 232 | Medical electrical equipment – operating tables | Impedance of the protective circuit at a current of min. 25 A Range (0,001 - 2,1) Ω Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 233 | Medical electrical equipment – operating tables | Leakage currents earth leakage current, enclosure leakage current, patient leakage current, patient auxiliary current, patient leakage current (mains voltage on the applied part) Range (0 - 10) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 234 | Medical electrical equipment – operating tables | Dielectric strength of the insulation Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN IEC 60601-2-46:2025-03 | ||
| 235 | Medical electrical equipment – operating tables | Deformation of the enclosure in the heat resistance test Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Ball pressure test | PN-EN IEC 60601-2-46:2025-03 | |
| 236 | Medical electrical equipment – operating tables | Creepage distances and clearances Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 237 | Medical electrical equipment – operating tables | Insulation of the mains supply cord (cord anchorage and bend protection) force (0,1 - 100) N, torque torsional (0,001 - 0,35) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test and torsion test | PN-EN IEC 60601-2-46:2025-03 | |
| 238 | Medical electrical equipment – operating tables | Gaps in protection against mechanical hazards Range (0,1 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: measurement of linear dimensions | PN-EN IEC 60601-2-46:2025-03 | |
| 239 | Medical electrical equipment – operating tables | Instability of the device in the transport position, other than during transport and as a result of horizontal and vertical forces Range (0 - 30)°, force (0,1 - 800) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN IEC 60601-2-46:2025-03 | |
| 240 | Medical electrical equipment – operating tables | Instability of the device during transport and other than during transport angle (0 - 30)° force (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN IEC 60601-2-46:2025-03 | |
| 241 | Medical electrical equipment – operating tables | Force required to set the equipment in motion Range (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 242 | Medical electrical equipment – operating tables | Ability of the device to pass over a threshold Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN IEC 60601-2-46:2025-03 | ||
| 243 | Medical electrical equipment – operating tables | Mechanical strength of handles and other means for carrying equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN IEC 60601-2-46:2025-03 | |
| 244 | Medical electrical equipment – operating tables | Mechanical strength of support systems Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN IEC 60601-2-46:2025-03 | |
| 245 | Medical electrical equipment – operating tables | Temperature emitted by various parts of the appliance Range (from -50 to 800)°C Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Temperature measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 246 | Medical electrical equipment – operating tables | Resistance of the device to liquid spillage Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN IEC 60601-2-46:2025-03 | ||
| 247 | Medical electrical equipment – operating tables | Mechanical strength of equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test, impact test, free fall, impact against a 40 mm protruding threshold, descent from a 40 mm step, impact of the device against a door frame, housing deformation | PN-EN IEC 60601-2-46:2025-03 | |
| 248 | Medical electrical equipment – operating tables | Strength of actuating parts of equipment controls Range torsional moment Range (0,001 - 6) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN IEC 60601-2-46:2025-03 | |
| 249 | Medical electrical equipment – operating tables | Mechanical strength of foot controls Range (0,1 - 1350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test | PN-EN IEC 60601-2-46:2025-03 | |
| 250 | Medical electrical equipment – operating tables | Electric strength of transformers Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN IEC 60601-2-46:2025-03 | ||
| 251 | Medical electrical equipment – medical beds | Power consumption Range (0,001 - 9000,0) W Range (0,001 - 9000,0) VA Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 252 | Medical electrical equipment – medical beds | Voltage Range (0,001 - 900) V Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 253 | Medical electrical equipment – medical beds | Current Range (0,001 - 30) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 254 | Medical electrical equipment – medical beds | Legibility of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 255 | Medical electrical equipment – medical beds | Durability of marking Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Marking durability test (water, alcohol) | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 256 | Medical electrical equipment – medical beds | Impedance of the protective circuit + with a current of min. 25 A Range (0,001 - 2,1) Ω Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 257 | Medical electrical equipment – medical beds | Leakage currents earth leakage current, enclosure leakage current, patient leakage current, patient auxiliary current, patient leakage current (mains voltage on the applied part) Range (0 - 10) A Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 258 | Medical electrical equipment – medical beds | Dielectric strength of the insulation Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | ||
| 259 | Medical electrical equipment – medical beds | Deformation of the enclosure in the heat resistance test Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Ball pressure test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 260 | Medical electrical equipment – medical beds | Creepage distances and clearances Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 261 | Medical electrical equipment – medical beds | Insulation of the mains supply cord (cord anchorage and bend protection) force (0,1 - 100) N, torque torsional (0,001 - 0,35) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test and torsion test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 262 | Medical electrical equipment – medical beds | Gaps in protection against mechanical hazards Range (0,1 - 1000) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: measurement of linear dimensions | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 263 | Medical electrical equipment – medical beds | Instability of the device in the transport position, other than during transport and as a result of horizontal and vertical forces angle (0 - 30)°, force (0,1 - 1100) N load (0,1 - 2200) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 264 | Medical electrical equipment – medical beds | Instability of the device during transport and other than during transport angle (0 - 30)° force (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 265 | Medical electrical equipment – medical beds | Force required to set the equipment in motion Range (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 266 | Medical electrical equipment – medical beds | Ability of the device to pass over a threshold Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | ||
| 267 | Medical electrical equipment – medical beds | Mechanical strength of handles and other means for carrying equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 268 | Medical electrical equipment – medical beds | Mechanical strength of support systems Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 269 | Medical electrical equipment – medical beds | Temperature emitted by various parts of the appliance Range (-50 - 800)°C Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: Temperature measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 270 | Medical electrical equipment – medical beds | Resistance of the device to liquid spillage Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | ||
| 271 | Medical electrical equipment – medical beds | Mechanical strength of equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test, impact test, free fall, impact against a 40 mm protruding threshold, descent from a 40 mm step, impact of the device against a door frame, housing deformation | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 272 | Medical electrical equipment – medical beds | Strength of actuating parts of equipment controls Range torsional moment Range (0,001 - 6) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 273 | Medical electrical equipment – medical beds | Mechanical strength of foot controls Range (0,1 - 1350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 274 | Medical electrical equipment – medical beds | Electric strength of transformers Range (0,5 - 4,0) kV Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | ||
| 275 | Medical electrical equipment – medical beds | Angular quantities Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN 60601-2-52:2010 | PN-EN 60601-2-52:2010/A1:2015-07 | |
| 276 | Medical devices – Hoists for the transfer of disabled persons | Linear dimensions Range (0,1 - 1200) mm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN ISO 10535:2022-04 | |
| 277 | Medical devices – Hoists for the transfer of disabled persons | Angular quantities Range (0 - 360)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN ISO 10535:2022-04 | |
| 278 | Medical devices – Hoists for the transfer of disabled persons | Force and torque Range (0,1 - 750) N and Range (0,001 - 1,9) Nm Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN ISO 10535:2022-04 | |
| 279 | Medical devices – Hoists for the transfer of disabled persons | Mechanical strength Range up to 18 kN Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: compression test | PN-EN ISO 10535:2022-04 | |
| 280 | Medical devices – Hoists for the transfer of disabled persons | Rate of raising and lowering Range up to 2 m/s Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: indirect measurement | PN-EN ISO 10535:2022-04 | |
| 281 | Medical devices – Hoists for the transfer of disabled persons | Static stability Range (0 - 30)° Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: stability test | PN-EN ISO 10535:2022-04 | |
| 282 | Medical devices – Hoists for the transfer of disabled persons | Mechanical strength of equipment Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: free fall | PN-EN ISO 10535:2022-04 | |
| 283 | Medical devices – Hoists for the transfer of disabled persons | Mechanical strength of support systems Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: load test | PN-EN ISO 10535:2022-04 | |
| 284 | Medical devices – Hoists for the transfer of disabled persons | Force required to set the equipment in motion Range (0,1 - 350) N Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
Method: direct measurement | PN-EN ISO 10535:2022-04 | |
| 285 | Machinery and equipment. Degrees of protection provided by enclosures (IP code) | IP degree of protection Range IP 1X, 2X, 3X, 4X, X1, X2, X3, X4, X5 Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign |
PN-EN 60529:2003 | PN-EN 60529:2003/A2:2014-07 | PN-EN 60529:2003/AC:2017-12P | ||
| 286 | Auxiliary products | Linear dimensions Range (0 – 5000) mm |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 287 | Auxiliary products | Angular quantities Range (0 – 220)° |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 288 | Auxiliary products | Force Range (0,1 – 750) N |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 289 | Auxiliary products | Residual leakage current, earth leakage current, touch leakage current, patient leakage current, patient auxiliary current, patient leakage current (mains voltage on the applied part) Range (0 – 10) A |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 290 | Auxiliary products | Surface temperature Range (-20 - 100)°C |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 291 | Auxiliary products | Prevention of entrapment of parts of the human body, safety of moving parts Range (0 – 5000) mm |
Method: measurement of geometric quantities and testing with probes | PN-EN ISO 21856:2023-01 | |
| 292 | Auxiliary products | Mechanical strength of equipment | Method: Drop test, impact against a protruding 40 mm threshold, descent from a 40 mm step, impact against a door frame | PN-EN ISO 21856:2023-01 | |
| 293 | Auxiliary products | Strength of handles Range (0 – 18) kN |
Method: load test | PN-EN ISO 21856:2023-01 | |
| 294 | Auxiliary products | Stability Range (0 – 30)° |
Method: stability test | PN-EN ISO 21856:2023-01 | |
| 295 | Auxiliary products | Static strength Range (0 – 18) kN |
Method: compression test | PN-EN ISO 21856:2023-01 | |
| 296 | Auxiliary products | Mechanical strength Range (0 – 18) kN |
Method: compression test | PN-EN ISO 21856:2023-01 | |
| 297 | Auxiliary products | Shaping of structural elements Range (0 – 5000) mm and Range (0 – 220)° |
Method: direct measurement | PN-EN ISO 21856:2023-01 | |
| 298 | Auxiliary products | Ergonomic principles Range (0 – 5000) mm |
Method: measurement of geometric quantities | PN-EN ISO 21856:2023-01 | |
| 299 | Auxiliary products | Safety in use by children | Method: assessment of the conformity of the part size with the cylinder | PN-EN ISO 21856:2023-01 | |
| 300 | Auxiliary products | Safety in use Range (0 – 20) kg and (0 – 1000) mm |
Method: drop test | PN-EN ISO 21856:2023-01 | |
| 301 | Auxiliary products | Resistance of the device to liquid overflow, resistance to liquid spillage, resistance to liquid ingress | PN-EN ISO 21856:2023-01 | ||
| 302 | Auxiliary products | Strength and durability Range (0,1 – 1800) N |
PN-EN ISO 21856:2023-01 | ||
| 303 | Medical supply units | Electrical resistance Range (0 – 45) MΩ |
Method: direct measurement | PN-EN ISO 11197:2020-04 | |
| 304 | Medical supply units | Impact resistance | Method: impact test | PN-EN ISO 11197:2020-04 | |
| 305 | Medical supply units | Static strength | Method: load test | PN-EN ISO 11197:2020-04 | |
| 306 | Medical supply units | Mechanical hazards related to load-bearing components | Method: load and stability test | PN-EN ISO 11197:2020-04 | |
| 307 | Medical supply units | Temperature emitted by various parts of the appliance Range (from -20 to 100)°C |
Method: direct measurement | PN-EN ISO 11197:2020-04 | |
| 308 | Medical supply units | Cross-section of the wiring Range (0 – 50) mm |
Method: direct measurement and indirect measurement | PN-EN ISO 11197:2020-04 | |
| 309 | Medical supply units | Air release | Method: leak tightness test | PN-EN ISO 11197:2020-04 | |
| 310 | Medical supply units | Linear dimensions Range (0 – 5000) mm |
Method: direct measurement | PN-EN ISO 11197:2020-04 | |
| 311 | Medical gas pipeline systems | Visual signals – legibility of markings | PN-EN ISO 7396-1:2016-07 | PN-EN ISO 7396-1:2016-07/A1:2019-03 | PN-EN ISO 7396-2:2011 | ||
| 312 | Medical gas pipeline systems | Tightness and mechanical strength | Method: pressure test | PN-EN ISO 7396-1:2016-07 | PN-EN ISO 7396-1:2016-07/A1:2019-03 | PN-EN ISO 7396-2:2011 | |
| 313 | Medical gas pipeline systems | Presence of cross-links | PN-EN ISO 7396-1:2016-07 | PN-EN ISO 7396-1:2016-07/A1:2019-03 | PN-EN ISO 7396-2:2011 | ||
| 314 | Terminal units for medical gas pipeline systems | Tightness and efficiency Range (from -90 to 1200) kPa |
Method: pressure test | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | |
| 315 | Terminal units for medical gas pipeline systems | Socket and probe strength test | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | ||
| 316 | Terminal units for medical gas pipeline systems | Connection/disconnection strength Range (from -90 to 1200) kPa |
Method: pressure drop | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | |
| 317 | Terminal units for medical gas pipeline systems | Connection force and torque pressure (from -90 to 1200) kPa torsional moment (0,001 – 1) Nm force (0 – 500) N |
PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | ||
| 318 | Terminal units for medical gas pipeline systems | Disconnection force and torque pressure (from -90 to 1200) kPa torsional moment (0,001 – 1) Nm force (0 – 500) N |
PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | ||
| 319 | Terminal units for medical gas pipeline systems | Mechanical strength | Method: tensile test | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | |
| 320 | Terminal units for medical gas pipeline systems | Connections of receiving or delivery hoses to insertion ends | Method: axial force action | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | |
| 321 | Terminal units for medical gas pipeline systems | Durability of markings and colour coding | Method: use of distilled water, ethyl alcohol, isopropyl alcohol | PN-EN ISO 9170-1:2020-12 | PN-EN ISO 9170-2:2010 | |
| 322 | Walking aids manipulated by both arms | Linear dimensions Range (0 – 5000) mm |
Method: direct measurement | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 323 | Walking aids manipulated by both arms | Angular quantities Range (0 – 220)° |
Method: direct measurement | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 324 | Walking aids manipulated by both arms | Force Range (0,1 – 750) N |
Method: direct measurement | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 325 | Walking aids manipulated by both arms | Strength of handles Range (0,1 – 1800) N |
Method: load test | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 326 | Walking aids manipulated by both arms | Stability Range (0 – 30)° |
Method: stability test | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 327 | Walking aids manipulated by both arms | Static strength Range (0,1 – 1800) N |
Method: compression test | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 328 | Walking aids manipulated by both arms | Brake durability Range (0,1 – 1800) N |
Method: load test | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 329 | Walking aids manipulated by both arms | Gaps in protection against mechanical hazards Range (0,1 - 1000) mm |
Method: measurement of linear dimensions | PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | |
| 330 | Walking aids manipulated by both arms | Strength of the rest seat and backrest Range (0,1 – 1800) N |
PN-EN ISO 11199-2:2021-12 | PN-EN ISO 11199-2:2021-12/A1:2025-06 | PN-EN ISO 11199-3:2008 | ||
| 331 | Electrical measuring instruments, automation and laboratory equipment | Voltage Range (0,001 – 900) V |
Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 332 | Electrical measuring instruments, automation and laboratory equipment | Current Range (0,001 – 30) A |
Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 333 | Electrical measuring instruments, automation and laboratory equipment | Power Range (0,001 – 9000,0) W Range (0,001 – 9000,0) VA |
Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 334 | Electrical measuring instruments, automation and laboratory equipment | Frequency Range (0,00 – 300000) Hz |
PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | ||
| 335 | Electrical measuring instruments, automation and laboratory equipment | Temperature emitted by various parts of the appliance Range (-20 - 100)°C |
Method: temperature measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 336 | Electrical measuring instruments, automation and laboratory equipment | Winding temperature | Method: resistive | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 337 | Electrical measuring instruments, automation and laboratory equipment | Fire spread | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | ||
| 338 | Electrical measuring instruments, automation and laboratory equipment | Durability of marking | Method: durability test of the marking (specified agent, alcohol) | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 339 | Electrical measuring instruments, automation and laboratory equipment | Residual energy | Method: voltage measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 340 | Electrical measuring instruments, automation and laboratory equipment | Accessibility | Method: testing with probes – testing with test fingers and test pins | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 341 | Electrical measuring instruments, automation and laboratory equipment | Voltage / current / capacitance / stored energy on accessible parts | Method: measurement of voltage / current / capacitive charge | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 342 | Electrical measuring instruments, automation and laboratory equipment | Bonding impedance / earth continuity test Range torque (0,0 – 11,5) Nm |
Method: tightening and loosening test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 343 | Electrical measuring instruments, automation and laboratory equipment | Bonding impedance / earth continuity test with a current of min. 25 A Range (0,001 – 2,100) Ω |
Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 344 | Electrical measuring instruments, automation and laboratory equipment | Capacitive discharge test | Method: voltage measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 345 | Electrical measuring instruments, automation and laboratory equipment | Creepage distances and clearances | Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 346 | Electrical measuring instruments, automation and laboratory equipment | Geometric dimensions Range (0 – 5000) mm |
Method: direct measurement | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 347 | Electrical measuring instruments, automation and laboratory equipment | Dielectric strength of the insulation Range (0,5 – 4,0) kV |
PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | ||
| 348 | Electrical measuring instruments, automation and laboratory equipment | Installation of non-detachable supply cords (cord entry and cord anchorage) geometric dimension (0 – 300) mm, force (0,000 – 500) N, torsional moment (0,001 – 0,35) Nm |
Method: dimensional measurement, pull test and torsion test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 349 | Electrical measuring instruments, automation and laboratory equipment | Force and pressure limitation Range (0,000 – 500) N |
Method: measurement of force and contact area | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 350 | Electrical measuring instruments, automation and laboratory equipment | Stability Range (0 – 30)°, force (0,1 – 800) N |
Method: stability test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 351 | Electrical measuring instruments, automation and laboratory equipment | Mechanical strength of handles and other means for carrying equipment | Method: load test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 352 | Electrical measuring instruments, automation and laboratory equipment | Mechanical strength of support systems and wall mounting | Method: load test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 353 | Electrical measuring instruments, automation and laboratory equipment | Mechanical strength of equipment | Method: static test, impact test, free fall | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 354 | Electrical measuring instruments, automation and laboratory equipment | Limited-energy circuit | Method: measurement of voltage and current | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 355 | Electrical measuring instruments, automation and laboratory equipment | Resistance to heat | Method: thermal conditioning | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 356 | Electrical measuring instruments, automation and laboratory equipment | Deformation of the enclosure in the heat resistance test | Method: ball pressure test | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 357 | Electrical measuring instruments, automation and laboratory equipment | Protection against hazards from fluids | Method: cleaning / disinfection, pouring over, pouring through | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | |
| 358 | Electrical measuring instruments, automation and laboratory equipment | Devices for protection against overheating | PN-EN 61010-1:2011 | PN-EN 61010-1:2011/A1:2019-04 | PN-EN IEC 61010-2-101:2023-04 | PN-EN IEC 61010-2-101:2023-04/A11:2023-08 | ||
| Zabrze Branch Testing Laboratory; Non-Destructive Testing Laboratory | |||||
| 359 | Technical equipment, steel structures, steel materials, welded joints E | HV hardness Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: dynamic UCI | MS-0045009 | |
| 360 | Cast steel castings E | Discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: ultrasonic | PN-EN ISO 16810 | PN-EN ISO 16811 | PN-EN ISO 16827 | PN-EN 12680-1 | PN-EN 12680-2 | |
| 361 | Forgings E | Discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: ultrasonic | PN-EN ISO 16810 | PN-EN ISO 16811 | PN-EN ISO 16827 | PN-EN 10228-3 | PN-EN 10228-4 | |
| 362 | Welded joints in metallic materials E | Discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: ultrasonic | PN-EN ISO 16810 | PN-EN ISO 16811 | PN-EN ISO 16823 | PN-EN ISO 16826 | PN-EN ISO 16827 | PN-EN ISO 17640 | PN-EN ISO 23279 | |
| 363 | Flat steel products E | Discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: ultrasonic | PN-EN ISO 16810 | PN-EN ISO 16811 | PN-EN ISO 16827 | PN-EN 10160 | |
| 364 | Metal products E | Thickness Range (0,5-300 mm) Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: ultrasonic | PN-EN ISO 16810 | PN-EN ISO 16811 | PN-EN ISO 16823 | PN EN ISO 16809 | |
| 365 | Castings of ferromagnetic materials E | Surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: magnetic particle | PN-EN ISO 9934-1 | PN-EN ISO 3059 | PN-EN 1369 | |
| 366 | Forgings of ferromagnetic materials E | Surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: magnetic particle | PN-EN ISO 9934-1 | PN-EN ISO 3059 | PN-EN 10228-1 | |
| 367 | Pipes of ferromagnetic materials E | Surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: magnetic particle | PN-EN ISO 9934-1 | PN-EN ISO 3059 | PN-EN ISO 10893-5 | |
| 368 | Welded joints of ferromagnetic materials E | Surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: magnetic particle | PN-EN ISO 9934-1 | PN-EN ISO 3059 | PN-EN ISO 17638 | |
| 369 | Castings E | Discontinuities open to the tested surface Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: penetrant | PN-EN ISO 3452-1 | PN-EN ISO 3059 | PN-EN 1371-1 | PN-EN 1371-2 | |
| 370 | Steel forgings E | Discontinuities open to the tested surface Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: penetrant | PN-EN ISO 3452-1 | PN-EN ISO 3059 | PN-EN 10228-2 | |
| 371 | Steel tubes E | Discontinuities open to the tested surface Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: penetrant | PN-EN ISO 3452-1 | PN-EN ISO 3059 | PN-EN ISO 10893-4 | |
| 372 | Welded joints E | Discontinuities open to the tested surface Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: penetrant | PN-EN ISO 3452-1 | PN-EN ISO 3059 | |
| 373 | Products made of metallic materials including: sheets, castings, forgings and pipes E | Shape imperfections and external surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: visual | PN-EN 13018 | |
| 374 | Welded joints in metallic materials E | Shape imperfections and external surface discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: visual | PN-EN 13018 | PN-EN ISO 17637 | |
| 375 | Welded joints of metallic materials with an equivalent thickness for steel up to 40 mm E | Discontinuities Regulated area: Tests performed outside the premises and at the premises of the laboratory are marked in the middle column with the sign E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
Method: radiographic | PN-EN ISO 17636-1 | |
Reference standards (153)
16 CFR Part 1227
16 CFR Part 1261
ANSI/BIFMA X5.4 (cl. 10, 14, 17)
ANSI/BIFMA X5.5 (cl. 4, 5, 6)
ANSI/BIFMA X5.6 (cl. 5, 6, 7, 8)
ASTM F 833
ASTM F2057
DIN 51097:1992
EN ISO 8442-1 (cl. 5.3, Annex A.1.)
EN ISO 8442-5
IP-TÜV-25 Measurement of physical quantities of consumer products
ISO 19833
ISO/IEC 19752
ISO/IEC 19798
ISO/IEC 24711
ISO/IEC 24712
ISO/IEC 29102
ISO/IEC 29103
MS-0045009
PN EN ISO 16809
PN-EN 1004-1:2021-04 clauses: 7, 8, Annex A
PN-EN 10160
PN-EN 1022
PN-EN 10228-1
PN-EN 10228-2
PN-EN 10228-3
PN-EN 10228-4
PN-EN 1130
PN-EN 1176-1
PN-EN 1176-10
PN-EN 1176-11
PN-EN 1176-2
PN-EN 1176-3
PN-EN 1176-4
PN-EN 1176-5
PN-EN 1176-6
PN-EN 1176-7
PN-EN 1177
PN-EN 12221-1
PN-EN 12221-2
PN-EN 12520
PN-EN 12521
PN-EN 12680-1
PN-EN 12680-2
PN-EN 12727
PN-EN 12875-1
PN-EN 13018
PN-EN 131-1
PN-EN 131-2
PN-EN 131-3
PN-EN 13150
PN-EN 13451-1 excluding cl. 4.8
PN-EN 13451-2
PN-EN 13451-3
PN-EN 13451-4
PN-EN 13451-6
PN-EN 1369
PN-EN 1371-1
PN-EN 1371-2
PN-EN 13759
PN-EN 13845
PN-EN 14183
PN-EN 1466
PN-EN 14749
PN-EN 14974
PN-EN 14975
PN-EN 14988
PN-EN 15338
PN-EN 15372
PN-EN 15567-1
PN-EN 16121
PN-EN 16122
PN-EN 16139
PN-EN 16630
PN-EN 1670
PN-EN 16899
PN-EN 17022
PN-EN 17072
PN-EN 17191
PN-EN 1725
PN-EN 1728
PN-EN 1729-1
PN-EN 1729-2
PN-EN 1730
PN-EN 1860-1
PN-EN 1860-3
PN-EN 1860-4
PN-EN 1888-1
PN-EN 1888-2
PN-EN 1888-3
PN-EN 50637:2018-04
PN-EN 527-1
PN-EN 527-2
PN-EN 581-1
PN-EN 581-2
PN-EN 581-3
PN-EN 60068-2-11
PN-EN 60529:2003
PN-EN 60529:2003/A2:2014-07
PN-EN 60529:2003/AC:2017-12P
PN-EN 60601-1-11:2015-09
PN-EN 60601-1-11:2015-09/A1:2021-12
PN-EN 60601-1-6:2010
PN-EN 60601-1-6:2010/A1:2015-09
PN-EN 60601-1:2011
PN-EN 60601-1:2011/A12:2014-12
PN-EN 60601-1:2011/A13:2025-01
PN-EN 60601-1:2011/A1:2014-02
PN-EN 60601-1:2011/A2:2022-03
PN-EN 60601-2-52:2010
PN-EN 60601-2-52:2010/A1:2015-07
PN-EN 61010-1:2011
PN-EN 61010-1:2011/A1:2019-04
PN-EN 71-1
PN-EN 71-8
PN-EN 716-1
PN-EN 716-2
PN-EN 747-1
PN-EN 747-2
PN-EN IEC 60601-2-46:2025-03
PN-EN IEC 61010-2-101:2023-04
PN-EN IEC 61010-2-101:2023-04/A11:2023-08
PN-EN ISO 10289
PN-EN ISO 10535:2022-04
PN-EN ISO 10893-4
PN-EN ISO 10893-5
PN-EN ISO 11197:2020-04
PN-EN ISO 11199-2:2021-12
PN-EN ISO 11199-2:2021-12/A1:2025-06
PN-EN ISO 11199-3:2008
PN-EN ISO 16810
PN-EN ISO 16811
PN-EN ISO 16823
PN-EN ISO 16826
PN-EN ISO 16827
PN-EN ISO 17636-1
PN-EN ISO 17637
PN-EN ISO 17638
PN-EN ISO 17640
PN-EN ISO 2178
PN-EN ISO 21856:2023-01
PN-EN ISO 23279
PN-EN ISO 2360
PN-EN ISO 3059
PN-EN ISO 3452-1
PN-EN ISO 6270-2
PN-EN ISO 7396-1:2016-07
PN-EN ISO 7396-1:2016-07/A1:2019-03
PN-EN ISO 7396-2:2011
PN-EN ISO 9170-1:2020-12
PN-EN ISO 9170-2:2010
PN-EN ISO 9227
PN-EN ISO 9934-1