🇵🇱 LABOTEST PL

PCA AB 894 • Toruń, Poland • 141 methods

Water & wastewaterEnvironmentMaterials & polymers

LABOTEST is a laboratory accredited by PCA under number AB 894 (Toruń, Poland). Its accreditation scope covers 141 test methods in the following areas: Water & wastewater, Environment, Materials & polymers. Test objects include: Water, wastewater, Water, Workplace environment − air, Soil. Most frequently used techniques: Spectrophotometric method, Flame atomic absorption spectrometry (FAAS), Titrimetric method.

At a glance

Accreditation number: PCA AB 894
Methods in scope: 141
Types of test objects: 24
Techniques used: 29
City: Toruń, Poland

Accreditation number: AB 894
Accreditation body: PCA
Address: LABORATORIUM ANALIZ FIZYKOCHEMICZNYCH, Marek Kozicki, ul. M. Skłodowskiej-Curie 61/67, 87-100 Toruń
City: Toruń, Poland

What this laboratory tests (24)

Water, wastewater — 31 methods
Water — 25 methods
Workplace environment − air — 19 methods
Soil — 15 methods
Sewage sludge — 11 methods
Landfill gases — 6 methods
Waste gases — 6 methods
General environment − noise from installations, equipment and industrial plants — 2 methods
General environment − noise from roads, railway lines, tram lines — 2 methods
Machinery and equipment − noise — 2 methods
Rooms in residential, collective residence and public utility buildings − noise — 2 methods
Wastewater — 2 methods
Water intended for human consumption — 2 methods
Workplace environment – cold microclimate — 2 methods
Workplace environment – hot microclimate — 2 methods
and 9 more

Analytical techniques used (29)

Spectrophotometric method — 19 methods
Flame atomic absorption spectrometry (FAAS) — 18 methods
Titrimetric method — 14 methods
Gravimetric method — 12 methods
Direct measurement method — 11 methods
Gas chromatography with flame ionization detection (GC-FID) — 6 methods
Electrothermal atomization atomic absorption spectrometry (ETAAS) — 5 methods
Hydride generation atomic absorption spectrometry (HGAAS) — 4 methods
Cold vapour atomic absorption spectrometry (CVAAS) — 3 methods
Conductometric method — 2 methods
Electrochemical method — 2 methods
Flame atomic emission spectrometry (FEAS) — 2 methods
Gas chromatography using headspace solid-phase microextraction with flame ionization detection (HS-SPME-GC-FID) — 2 methods
Non-dispersive infrared spectrometry NDIR — 2 methods
Potentiometric method — 2 methods
and 14 more

Certificate information

Issue date: 05.02.2026
Issue no.: 22

Accreditation scope — test methods (141)

No.	Test object	Methodology / Parameters	Technique	Reference document
Test methods
1	Water, wastewater	pH Range 2,0 - 12,0 Range 4,0 - 10,0	Potentiometric method pH; Potentiometric method	PN-EN ISO 10523:2012
2	Water, wastewater	Electrical conductivity Range (15 - 12800) μS/cm	Conductometric method	PN-EN 27888:1999
3	Water, wastewater	Chloride concentration Range (5 - 1000) mg/l	Titrimetric method	PN-ISO 9297:1994
4	Water, wastewater	Ammonium nitrogen concentration Range (0,04 - 4,0) mg/l Ammonium ion concentration Range (0,05 - 4,9) mg/l	Spectrophotometric method	PN-ISO 7150-1:2002
5	Water, wastewater	Ammonium nitrogen concentration Range (3,0 - 200) mg/l	Titrimetric method	PN-ISO 5664:2002
6	Water, wastewater	Nitrate nitrogen concentration Range (0,04 - 20) mg/l Nitrate concentration Range (0,16 - 88) mg/l	Spectrophotometric method	PB-53 edition 2 of 01.09.2025
7	Water, wastewater	Nitrite nitrogen concentration Range (0,007 - 20) mg/l Nitrite concentration Range (0,025 - 65) mg/l	Spectrophotometric method	PN-EN 26777:1999
8	Water, wastewater	Total suspended solids (TSS) Range (5 - 1000) mg/l	Gravimetric method	PN-EN 872:2007+Ap1:2007
9	Water, wastewater	Metal concentrations lead (0,2 - 2) mg/l cadmium (0,02 - 1,00) mg/l copper (0,05 - 1,00) mg/l nickel (0,1 - 10) mg/l zinc (0,05 - 2,00) mg/l	Flame atomic absorption spectrometry (FAAS)	PN-ISO 8288:2002 Method A
10	Water, wastewater	Metal concentrations lead (1 - 500) μg/l cadmium (0,25 - 50) μg/l copper (1,0 - 500) μg/l nickel (2,5 - 100) μg/l	Electrothermal atomization atomic absorption spectrometry (ETAAS)	PN-EN ISO 15586:2005
11	Water, wastewater	Phenol index Range (0,1 - 5,0) mg/l	Spectrophotometric method	PN-ISO 6439:1994 Method A
12	Water, wastewater	Dissolved solids concentration Range (10 - 20 000) mg/l	Gravimetric method	PB-07 edition 3 of 01.09.2025
13	Water, wastewater	Dry residue Range (10 - 5000) mg/l	Gravimetric method	PB-07 edition 3 of 01.09.2025
14	Water, wastewater	Loss on ignition Range (10 - 5000) mg/l	Gravimetric method	PB-07 edition 3 of 01.09.2025
15	Water, wastewater	Sulfate concentration Range (6 - 1000) mg/l	Gravimetric method	PN-ISO 9280:2002
16	Water, wastewater	Chromium concentration Range (5 - 100) μg/l	Electrothermal atomization atomic absorption spectrometry (ETAAS)	PN-EN 1233:2000
17	Water, wastewater	Sodium concentration Range (0,1 - 500) mg/l	Flame atomic emission spectrometry (FEAS)	PN-ISO 9964-3:1994+Ak:1997
18	Water, wastewater	Potassium concentration Range (0,1 - 500) mg/l	Flame atomic emission spectrometry (FEAS)	PN-ISO 9964-3:1994+Ak:1997
19	Water, wastewater	Mineral oil index Range (0,2 - 100) mg/l	Gas chromatography with flame ionization detection (GC-FID)	PN-EN ISO 9377-2:2003
20	Water, wastewater	Ether extract Range (0,5 - 1000) mg/l	Gravimetric method	PB-19 edition 3 of 01.09.2025
21	Water, wastewater	Free chlorine concentration Range (0,02 - 0,75) mg/l Total chlorine concentration Range (0,02 - 0,75) mg/l	Spectrophotometric method	PB-09 edition 3 of 01.09.2025 \| based on the Pocket Colorimeter II Hach Lange test
22	Water, wastewater	Aluminium concentration Range (10 - 1000) μg/l	Electrothermal atomization atomic absorption spectrometry (ETAAS)	PN-EN ISO 12020:2002
23	Water, wastewater	Chromium(VI) concentration Range (5,0 - 500) μg/l	Spectrophotometric method	PN-77/C-04604/08
24	Water, wastewater	Biochemical oxygen demand BOD5 Range (0,7 - 6,0) mg/l O2	Titrimetric method	PN-EN 1899-2:2002
25	Water, wastewater	Biochemical oxygen demand BOD5 Range (1 - 6000) mg/l O2	Titrimetric method	PN-EN ISO 5815-1:2019-12
26	Water, wastewater	Kjeldahl nitrogen concentration Range (1,5 - 200) mg/l	Titrimetric method	PN-EN 25663:2001
27	Water, wastewater	Total nitrogen concentration (calculated)		PB-03 edition 4 of 01.09.2025
28	Water, wastewater	Total phosphorus concentration Range (0,04 - 50) mg/l	Spectrophotometric method	PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010
29	Water, wastewater	Settleable solids Range (0,2 - 250) ml/l	Volumetric method	PB-11 edition 4 of 01.09.2025
30	Water, wastewater	Mercury concentration Range (0,10 - 20) μg/l	Cold vapour atomic absorption spectrometry (CVAAS)	PN-EN ISO 12846:2012 +Ap1:2016-07 cl. 7
31	Water, wastewater	Chemical oxygen demand COD Range (3,0 - 8000) mg/l O2	Spectrophotometric method	PN-ISO 15705:2005
32	Water	Iron concentration Range (0,10 - 50) mg/l	Flame atomic absorption spectrometry (FAAS)	PB-31 edition 3 of 01.09.2025
33	Water	Manganese concentration Range (5 - 500) μg/l	Electrothermal atomization atomic absorption spectrometry (ETAAS)	PN-EN ISO 15586:2005
34	Water	Cyanide concentration Range (0,01 - 0,6) mg/l	Spectrophotometric method	PB-26 edition 3 of 01.09.2025 \| based on the Hach Lange LCK315 cuvette test
35	Water	Fluoride concentration Range (0,1 - 1,5) mg/l	Spectrophotometric method	PB-25 edition 3 of 01.09.2025 \| based on the Hach Lange LCK315 cuvette test
36	Water	Arsenic concentration Range (0,5 - 100) μg/l	Hydride generation atomic absorption spectrometry (HGAAS)	PN-EN ISO 11969:1999
37	Water	Magnesium concentration Range (0,05 - 50) mg/l	Flame atomic absorption spectrometry (FAAS)	PN-EN ISO 7980:2002
38	Water	Calcium concentration Range (0,5 - 500) mg/l	Flame atomic absorption spectrometry (FAAS)	PN-EN ISO 7980:2002
39	Water	Antimony concentration Range (1,0 - 100) μg/l	Hydride generation atomic absorption spectrometry (HGAAS)	PB-45 edition 3 of 01.09.2025
40	Water	Selenium concentration Range (1,0 - 100) μg/l	Hydride generation atomic absorption spectrometry (HGAAS)	PB-44 edition 3 of 01.09.2025
41	Water	Total organic carbon concentration Range (3 - 300) mg/l	Spectrophotometric method	PB-02 edition 3 of 01.09.2025 \| based on the Hach Lange cuvette test LCK385 and 386
42	Water	Turbidity Range (0,10 - 100) NTU	Nephelometric method	PN-EN ISO 7027-1:2016-09
43	Water	Phosphate concentration Range (0,024 - 3,7) mg/l Range (0,008 - 1,2) mg/l P	Spectrophotometric method	PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010
44	Water	Colour Range (2 - 70) mg/l Pt	Spectrophotometric method	PN-EN ISO 7887:2012 Method C + Ap1:2015-06
45	Water	Alkalinity Range (0,4 - 20) mmol/l	Titrimetric method	PN-EN ISO 9963-1:2001+Ap1:2004
46	Water	Total content of calcium and magnesium (total hardness) Range (0,05 - 5) mmol/l Range (5 - 500) mg/l CaCO3	Titrimetric method	PN-ISO 6059:1999
47	Water	Magnesium concentration (calculated)		PN-C-04554-4:1999 Annex A
48	Water	Calcium concentration Range (2 - 100) mg/l	Titrimetric method	PN-ISO 6058:1999
49	Water	Total iron concentration Range (0,01 - 8,00) mg/l	Spectrophotometric method	PN-ISO 6332:2001+Ap1:2016-06
50	Water	Concentration of polycyclic aromatic hydrocarbons (PAH) benzo(a)pyrene (0,0025 - 10) μg/l dibenzo(ah)anthracene (0,01 - 10) μg/l benzo(b)fluoranthene (0,01 - 10) μg/l benzo(k)fluoranthene (0,01 - 10) μg/l benzo(ghi)perylene (0,01 - 10) μg/l indeno(1,2,3-c,d)pyrene (0,01 - 10) μg/l Sum of PAH (calculated)	High-performance liquid chromatography with fluorescence detection (HPLC-FLD)	PN-EN ISO 17993:2005
51	Water	Permanganate index Range (0,5 - 45) mg/l	Titrimetric method	PB-10 edition 3 of 01.09.2025
52	Water	Aggressive carbon dioxide concentration Range (7,0 - 100) mg/l	Titrimetric method	PN-EN 13577:2008
53	Water	Concentration of aromatic hydrocarbons benzene (0,3 - 100) μg/l ethylbenzene (0,60 - 100) μg/l xylenes (0,60 - 100) μg/l toluene (0,60 - 100) μg/l styrene (0,60 - 100) μg/l Sum of BTEX (calculated)	Gas chromatography using headspace solid-phase microextraction with flame ionization detection (HS-SPME-GC-FID)	PB-32 edition 3 of 01.09.2025
54	Water	Concentration of highly volatile halogenated hydrocarbon derivatives (THM) Range 1,2-dichloroethane (0,90 - 100) μg/l trichloroethene (1,0 - 100) μg/l tetrachloroethene (1,0 - 100) μg/l trichloromethane (1,0 - 100) μg/l bromodichloromethane (1,0 - 100) μg/l dibromochloromethane (1,0 - 100) μg/l tribromomethane (1,0 - 100) μg/l carbon tetrachloride (1,0 - 100) μg/l	Gas chromatography with electron capture detection (GC-ECD)	PN-EN ISO 10301:2002
55	Water	Dissolved oxygen concentration Range (0,7 - 20) mg/l O2	Titrimetric method	PN-EN 25813:1997
56	Wastewater	Total iron concentration Range (0,75 - 50) mg/l	Spectrophotometric method	PN-ISO 6332:2001+Ap1:2016-06
57	Wastewater	Iron concentration Range (1,5 - 40) mg/l	Flame atomic absorption spectrometry (FAAS)	PB-31 edition 3 of 01.09.2025
58	Soil	Sampling for chemical and physical testing		PN-ISO 10381-4:2007 \| PN-ISO 10381-5:2009
59	Soil	Cadmium content Range (0,025 - 10) mg/kg	Electrothermal atomization atomic absorption spectrometry (ETAAS)	PN-ISO 11047:2001
60	Soil	Element content lead (5,0 - 1500) mg/kg cadmium (2,0 – 250) mg/kg zinc (2,0 - 1500) mg/kg copper (2,0 - 1500) mg/kg nickel (2,0 - 1000) mg/kg	Flame atomic absorption spectrometry (FAAS)	PN-ISO 11047:2001
61	Soil	Mercury content Range (0,05 – 10) mg/kg	Cold vapour atomic absorption spectrometry (CVAAS)	PN-ISO 16772:2009
62	Soil	Chromium content Range (5,0 - 1000) mg/kg	Flame atomic absorption spectrometry (FAAS)	PN-ISO 11047:2001
63	Soil	pH - in H2O, pH - in KCl Range 2,0 - 12,0	Potentiometric method	PN-EN ISO 10390:2022-09
64	Soil	Electrical conductivity Range (15 - 12800) μS/cm	Conductometric method	PN-ISO 11265:1997+AC1:1997
65	Soil	Dry matter Range (0,1 - 99,5) %	Gravimetric method	PN-ISO 11465:1999
66	Soil	Water content Range (0,1 - 99,5) %	Gravimetric method	PN-ISO 11465:1999
67	Soil	Arsenic content Range (1,0 - 200) mg/kg	Hydride generation atomic absorption spectrometry (HGAAS)	PN-ISO 20280:2010
68	Soil	Kjeldahl nitrogen content Range (0,7 - 80) g/kg	Titrimetric method	PN-ISO 11261:2002
69	Soil	Available phosphorus content Range (1 - 35) mg/100 g P2O5	Spectrophotometric method	PN-R-04023:1996
70	Soil	Ammonium nitrogen content Range (1,5 - 40) mg/kg	Spectrophotometric method	PN-R-04028:1997
71	Soil	Nitrate nitrogen content Range (2,0 - 40) mg/kg	Spectrophotometric method	PN-R-04028:1997
72	Soil	Aromatic hydrocarbon content benzene (0,01 - 50) mg/kg toluene (0,01 - 50) mg/kg ethylbenzene (0,01 - 50) mg/kg xylenes (0,01 - 50) mg/kg styrene (0,01 - 50) mg/kg Sum of BTEX (calculated)	Gas chromatography using headspace solid-phase microextraction with flame ionization detection (HS-SPME-GC-FID)	PB-58 edition 3 of 01.09.2025
73	Sewage sludge	Element content lead (5,0 - 1500) mg/kg cadmium (2,0 - 250) mg/kg zinc (2,0 - 1500) mg/kg copper (2,0 - 1500) mg/kg nickel (5,0 - 1000) mg/kg	Flame atomic absorption spectrometry (FAAS)	PN-EN 13346:2002 \| PN-ISO 8288:2002 Method A
74	Sewage sludge	Mercury content Range (0,05 - 2) mg/kg	Cold vapour atomic absorption spectrometry (CVAAS)	PB-06 edition 4 of 01.09.2025
75	Sewage sludge	Chromium content Range (5,0 - 1000) mg/kg	Flame atomic absorption spectrometry (FAAS)	PN-EN 13346:2002 \| PN-ISO 1233:2000
76	Sewage sludge	Calcium content Range (0,1 - 50) g/kg Range (0,01 - 5) %	Flame atomic absorption spectrometry (FAAS)	PB-17 edition 3 of 01.09.2025
77	Sewage sludge	Magnesium content Range (0,01 - 5) g/kg Range (0,001 - 0,5) %	Flame atomic absorption spectrometry (FAAS)	PB-17 edition 3 of 01.09.2025
78	Sewage sludge	Total phosphorus content Range (1 - 25 ) g/kg P Range (2,3 - 57,3) g/kg P2O5 Range (0,1 - 25) % P	Spectrophotometric method	PN-EN 14672:2006
79	Sewage sludge	pH - in H2O Range 2,0 - 12,0	Potentiometric method	PN-EN ISO 10390:2022-09
80	Sewage sludge	Ammonium nitrogen content Range (0,03 - 25) %	Titrimetric method	PB-13 edition 3 of 01.09.2025
81	Sewage sludge	Dry residue Range (0,1 - 99,8) %	Gravimetric method	PN-EN 12880:2004
82	Sewage sludge	Loss on ignition Range (15,0 - 99,5) %	Gravimetric method	PN-EN 15935:2022-01
83	Sewage sludge	Total nitrogen content Range (0,07 - 40) %	Titrimetric method	PN-EN 13342:2002
84	Sewage sludge, Waste O): code 19 08 05	Sampling for chemical and physical testing		PN-EN ISO 5667-13:2011 excluding cl. 6.3.3, 6.3.7
85	Water intended for human consumption	Sampling for chemical and physical testing Temperature Range (0,0 - 65) °C		PN-ISO 5667-5:2017-10 \| PB-08 edition 4 of 20.09.2023
86	Water intended for human consumption	Sampling for testing microbiological Temperature Range (0,0 - 65) °C		PN-EN ISO 19458:2007 excluding cl. 4.4.3, 4.4.4., 4.4.5 and 4.4.6 \| PB-08 edition 4 of 20.09.2023
87	Water	Sampling for chemical and physical testing Temperature Range (1,0 - 35) °C		PN- ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3 \| PN-EN ISO 5667-6:2016-12 excluding cl. 7.5 and 7.6 \| PB-08 edition 4 of 20.09.2023
88	Wastewater, rainwater	Sampling for chemical and physical testing Temperature Range (1,0 - 50) °C	Manual method; Automatic method	PN-ISO 5667-10: 2021-11 \| PB-08 edition 4 of 20.09.2023
89	Waste: code 19 08 01, 19 08 02	Sampling for chemical and physical testing		PB-64 edition 1 of 05.07.2023
90	Landfill gases	Methane concentration Range (0,5 - 60) %	Non-dispersive infrared spectrometry NDIR	PB-30 edition 4 of 30.12.2024
91	Landfill gases	Velocity Range (0,15 - 5,00) m/s	Thermoanemometric method	PB-30 edition 4 of 30.12.2024
92	Landfill gases	Methane emission (calculated)		PB-30 edition 4 of 30.12.2024
93	Landfill gases	Carbon dioxide concentration Range (0,5 - 40) %	Non-dispersive infrared spectrometry NDIR	PB-30 edition 4 of 30.12.2024
94	Landfill gases	Carbon dioxide emission (calculated)		PB-30 edition 4 of 30.12.2024
95	Landfill gases	Oxygen concentration Range (0,5 - 21) %	Electrochemical method	PB-30 edition 4 of 30.12.2024
96	Workplace environment − air	Air sampling for the assessment of occupational exposure to: dust agents inhalable fraction respirable fraction organic substances including inhalable fraction inorganic substances including inhalable fraction respirable fraction thoracic fraction metals and their compounds, including inhalable fraction respirable fraction	Personal dosimetry method	PN-Z-04008-7:2002+Az1:2004
97	Workplace environment − air	Exposure index (calculated)		PN-Z-04008-7:2002+Az1:2004
98	Workplace environment − air	Concentration of harmful dust agents – respirable fraction Apatites and phosphorites Portland cement Amorphous and synthetic silica Organic dusts of animal and plant origin, excluding wood and flour dusts Coal (hard, brown) Range (0,11 - 4,40) mg/m3	Gravimetric method	PN-Z-04508:2022-05 \| PN-Z-04508:2022-05/Ap1:2022-08
99	Workplace environment − air	Concentration of harmful dust agents – inhalable fraction Apatites and phosphorites Portland cement Titanium dioxide Natural graphite Synthetic graphite Kaolin Amorphous and synthetic silica Wood dusts Flour dusts Dusts not classified according to toxicity Organic dusts of animal and plant origin, excluding wood and flour dusts Calcium sulfate (VI) (gypsum) Carbon black Coal (hard, brown) Calcium magnesium carbonate (dolomite) Silicon carbide, non-fibrous Range (0,12 - 20) mg/m3	Gravimetric method	PN-Z-04507:2022-05 \| PN-Z-04507:2022-05/Ap1:2022-08
100	Workplace environment − air	Concentration / content of manganese and its inorganic compounds expressed as Mn – inhalable fraction Range (0,005 - 5) mg/m3 Range (5,0 - 3000) μg in the sample – respirable fraction Range (0,005 - 5) mg/m3 Range (5,0 - 3000) μg in the sample	Flame atomic absorption spectrometry (FAAS)	PN-Z-04472:2015-10+Ap1:2015-12
101	Workplace environment − air	Concentration / content of iron oxides expressed as Fe Iron (III) oxide Iron (II) oxide Triiron tetraoxide – respirable fraction – inhalable fraction Range (0,04 - 15) mg/m3 Range (30 - 7500) μg/sample	Flame atomic absorption spectrometry (FAAS)	PN-Z-04469:2025-02
102	Workplace environment − air	Concentration / content of metallic nickel Range (0,017 - 0,7) mg/m3 Range (12,5 - 500) μg / sample	Flame atomic absorption spectrometry (FAAS)	PN-Z-04502:2019-10
103	Workplace environment − air	Concentration / content of nickel compounds calculated as Ni inhalable fraction respirable fraction Range (0,001 - 0,70) mg/m3 Range (1,00 - 500) μg/sample	Flame atomic absorption spectrometry (FAAS)	PN-Z-04502:2019-10
104	Workplace environment − air	Concentration / content of copper and its inorganic compounds - expressed as Cu Range (0,02 - 0,42) mg/m3 Range (14 - 300) μg/sample	Flame atomic absorption spectrometry (FAAS)	PN-79/Z-04106/02
105	Workplace environment − air	Concentration / content of metallic chromium, chromium compounds: chromium (II), chromium (III), chromium (VI) – calculated as Cr Range (0,017 - 2,8) mg/m3 Range (12,5 - 2000) μg in the sample	Flame atomic absorption spectrometry (FAAS)	PN-Z-04434:2011
106	Workplace environment − air	Concentration of chromium, metallic, chromium compounds: chromium (II) – calculated as Cr (II), chromium (III) – calculated as Cr (III) (calculated)		I-41 edition 3 of 05.10.2021 cl. 3
107	Workplace environment − air	Concentration / content of zinc oxide calculated as Zn – inhalable fraction Range (0,05 - 10) mg/m3 Range (35 - 7200) μg/sample	Flame atomic absorption spectrometry (FAAS)	PN-87/Z-04100/03
108	Workplace environment − air	Concentration / content of extraction naphtha Range (14 - 13000) mg/m3 Range (250 - 20000) μg in the sample	Gas chromatography with flame ionization detection (GC-FID)	PN-81/Z-04134/02
109	Workplace environment − air	Concentration / content of white spirit Range (14 - 13000) mg/m3 Range (250 - 20000) μg in the sample	Gas chromatography with flame ionization detection (GC-FID)	PN-81/Z-04134/03
110	Workplace environment − air	Concentration / content of kerosene Range (8,5 - 3000) mg/m3 Range (500 - 15000) μg in the sample	Gas chromatography with flame ionization detection (GC-FID)	PN-92/Z-04227/02
111	Workplace environment − air	Carbon monoxide concentration Range (2,3 - 199) mg/m3 Range (2 - 171) ppm	Electrochemical method	PB-36 edition 2 of 01.09.2025
112	Workplace environment − air	Exposure index (calculated)		PB-36 edition 2 of 01.09.2025
113	Workplace environment − air	Concentration/content of organic compounds benzene (0,076 - 15) mg/m3 Range (1,5 - 300) μg in the sample Range (0,023 - 4,62) ppm toluene (4,5 - 450) mg/m3 (90 - 9000) μg in the sample ethylbenzene (8,6 - 400) mg/m3 (170 - 18000) μg in the sample xylenes mixture of isomers 1,2-, 1,3-; 1,4 (8,6 - 450) mg/m3 (170 - 9000) μg in the sample styrene (2,5 - 250) mg/m3 (50 - 5000) μg in the sample acetone (19 - 2000) mg/m3 (375 - 6000) μg in the sample butan-2-one (15 - 900) mg/m3 (300 - 4000) μg in the sample ethanol (63 - 3800) mg/m3 (1250 - 7600) μg in the sample butan-1-ol (2,0 - 300) mg/m3 (40 - 1400) μg in the sample propan-2-ol (30 - 1800) mg/m3 (600 - 16200) μg in the sample ethyl acetate (28 - 1468) mg/m3 (550 - 28000) μg in the sample (7,64 - 402) ppm n-butyl acetate (8,6 - 720) mg/m3 (170 - 8500) μg in the sample	Gas chromatography with mass spectrometry detection (GC-MS)	PB-65 edition 1 of 06.09.2024
114	Workplace environment − air	Concentration / content of crystalline silica (quartz, cristobalite) respirable fraction Range (0,0063 - 0,50) mg/m3 Range (0,005 - 0,400) mg in the sample	Fourier transform infrared spectrometry method	Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130
115	Workplace environment − indoor electric lighting	Illuminance Range (0,5 - 10000) lx	Direct measurement method	PN-83/E-04040/03 \| PB-52 edition 5 of 01.09.2025
116	Workplace environment − indoor electric lighting	Illuminance uniformity (calculated)		PN-83/E-04040/03 \| PB-52 edition 5 of 01.09.2025
117	Workplace environment – hot microclimate	Air temperature Range (20 - 40) oC Natural wet bulb temperature Range (20 - 60) oC Black globe temperature Range (20 - 60) oC	Direct measurement method	PN-EN ISO 7243:2018-01
118	Workplace environment – hot microclimate	WBGT index, WBGTeff index (calculated)		PN-EN ISO 7243:2018-01
119	Workplace environment – moderate microclimate	Air temperature Range (10 - 30) oC Black globe temperature Range (10 - 40) oC Air humidity Range (20 - 90) % Air velocity Range (0,15 - 10) m/s	Direct measurement method	PN-EN ISO 7730:2006+Ap2:2016-04
120	Workplace environment – moderate microclimate	PMV index, PPD index (calculated)		PN-EN ISO 7730:2006+Ap2:2016-04
121	Workplace environment – cold microclimate	Air temperature Range (-20 - 10) oC Black globe temperature Range (-30 - 10) oC Air humidity Range (20 - 90) % Air velocity Range (0,15 - 10) m/s	Direct measurement method	PN-EN ISO 11079:2008
122	Workplace environment – cold microclimate	IREQmin index, IREQneutral index, twc index (calculated)		PN-EN ISO 11079:2008
123	Workplace environment − noise	A-weighted equivalent sound level Maximum A-weighted sound level C-weighted peak sound level Range (25 - 135) dB	Direct measurement method	PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 \| PN-N-01307:1994
124	Workplace environment − noise	Noise exposure level referred to: 8-hour daily working time the average weekly working time (calculated)		PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 \| PN-N-01307:1994
125	General environment − noise from installations, equipment and industrial plants	A-weighted equivalent sound pressure level Range (24 – 137) dB	Direct measurement method	Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706) \| PN ISO 9613-2:2002
126	General environment − noise from installations, equipment and industrial plants	A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated)	Calculation method	Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706) \| PN ISO 9613-2:2002
127	Rooms in residential, collective residence and public utility buildings − noise	A-weighted equivalent sound level Maximum A-weighted sound level Range (24 - 137) dB	Direct measurement method	PN-87/B-02156
128	Rooms in residential, collective residence and public utility buildings − noise	A-weighted equivalent sound level for reference time T (calculated)		PN-87/B-02156
129	Machinery and equipment − noise	A-weighted equivalent sound pressure level Range (24 - 137) dB	Direct measurement method	PN-EN ISO 3746:2011 \| PN-EN ISO 3746:2011/Ap1:2017-09 excluding cl. 8.4
130	Machinery and equipment − noise	Sound power level (calculated)		PN-EN ISO 3746:2011 \| PN-EN ISO 3746:2011/Ap1:2017-09 excluding cl. 8.4
131	General environment − noise from roads, railway lines, tram lines	A-weighted equivalent sound level A-weighted sound exposure level Range (24 - 90) dB	Direct measurement method	Annex 3 to the Regulation of the Minister of the Environment of 16.06.2011 (Journal of Laws No. 140, item 824 and No. 288, item 1697)
132	General environment − noise from roads, railway lines, tram lines	A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated)		Annex 3 to the Regulation of the Minister of the Environment of 16.06.2011 (Journal of Laws No. 140, item 824 and No. 288, item 1697)
133	Workplace environment − whole-body mechanical vibration	Frequency-weighted r.m.s. vibration acceleration Range (0,05 - 25) m/s2 Daily exposure, expressed as the energy-equivalent for 8 hours of the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components, taking into account the relevant factors (1.4awx, 1.4awy, awz) Exposure lasting 30 minutes or less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components, taking into account the relevant factors (1.4awx, 1.4awy, awz) (calculated)	Direct measurement method	PN-EN 14253+A1:2011
134	Workplace environment − hand-arm mechanical vibration	Frequency-weighted r.m.s. vibration acceleration Range (0,2 - 100) m/s2 Daily exposure, expressed as the energy-equivalent for 8 hours of the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) Exposure lasting 30 minutes or less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated)	Direct measurement method	PN-EN ISO 5349-1:2004 \| PN-EN ISO 5349-2:2004 \| PN-EN ISO 5349-2:2004/A1:2015-11
135	General environment − waste gas samples collected on sorbent tubes	Content of organic compounds acetone (2,5 - 1000) μg in the sample ethanol (12,0 - 1000) μg in the sample butan-1-ol (7,0 - 1400) μg in the sample ethyl acetate (6,0 - 2000) μg in the sample n-butyl acetate Range (6,0 - 4800) μg in the sample propan-2-ol (10 - 1000) μg in sample benzene (2,5 - 2000) μg in sample xylenes (3,6 - 1000) μg in sample ethylbenzene (2,5 - 10000) μg in sample toluene (2,5 - 2000) μg in sample styrene (3,7 - 1000) μg in sample butan-2-one (2,5 - 4000) μg in sample	Gas chromatography with flame ionization detection (GC-FID)	PB-60 edition 4 of 06.09.2024
136	Waste gases	Concentration of organic compounds benzene (0,1 - 400) mg/m3 xylenes (0,1 - 200) mg/m3 ethylbenzene (0,1 - 1000) mg/m3 toluene (0,1 - 400) mg/m3 styrene (0,1 - 200) mg/m3 acetone (0,3 - 200) mg/m3 butan-2-one (0,2 – 800) mg/m3 propan-2-ol (0,48 – 200) mg/m3 ethanol (0,58 - 200) mg/m3 butan-1-ol (0,34 - 300) mg/m3 ethyl acetate (0,28 - 400) mg/m3 n-butyl acetate (0,28 - 480) mg/m3	Gas chromatography with flame ionization detection (GC-FID)	PB-60 edition 4 of 06.09.2024
137	Waste gases	Gas volume flow rate for dynamic pressures >10 Pa Velocity Range (0,15 - 5,00) m/s	Stagnation pressure method; Thermoanemometric method	PN-Z-04030-7:1994
138	Waste gases	Total organic carbon concentration (TVOC) Range (2,0 - 500) mg/m3	Continuous flame ionization detection method (FID)	PN-EN 12619:2013
139	Waste gases	TVOC emission (calculated)		PN-EN 12619:2013
140	Waste gases	Sampling for determination of concentrations of organic compounds	Aspiration method using activated carbon	PN-Z-04008-4:1999
141	Waste gases	Emission of organic compounds (calculated)		PN-Z-04008-4:1999

Reference standards (121)

I-41 edition 3 of 05.10.2021 cl. 3

PB-02 edition 3 of 01.09.2025

PB-03 edition 4 of 01.09.2025

PB-06 edition 4 of 01.09.2025

PB-07 edition 3 of 01.09.2025

PB-08 edition 4 of 20.09.2023

PB-09 edition 3 of 01.09.2025

PB-10 edition 3 of 01.09.2025

PB-11 edition 4 of 01.09.2025

PB-13 edition 3 of 01.09.2025

PB-17 edition 3 of 01.09.2025

PB-19 edition 3 of 01.09.2025

PB-25 edition 3 of 01.09.2025

PB-26 edition 3 of 01.09.2025

PB-30 edition 4 of 30.12.2024

PB-31 edition 3 of 01.09.2025

PB-32 edition 3 of 01.09.2025

PB-36 edition 2 of 01.09.2025

PB-44 edition 3 of 01.09.2025

PB-45 edition 3 of 01.09.2025

PB-52 edition 5 of 01.09.2025

PB-53 edition 2 of 01.09.2025

PB-58 edition 3 of 01.09.2025

PB-60 edition 4 of 06.09.2024

PB-64 edition 1 of 05.07.2023

PB-65 edition 1 of 06.09.2024

PN ISO 9613-2:2002

PN- ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3

PN-77/C-04604/08

PN-79/Z-04106/02

PN-81/Z-04134/02

PN-81/Z-04134/03

PN-83/E-04040/03

PN-87/B-02156

PN-87/Z-04100/03

PN-92/Z-04227/02

PN-C-04554-4:1999 Annex A

PN-EN 1233:2000

PN-EN 12619:2013

PN-EN 12880:2004

PN-EN 13342:2002

PN-EN 13346:2002

PN-EN 13577:2008

PN-EN 14253+A1:2011

PN-EN 14672:2006

PN-EN 15935:2022-01

PN-EN 1899-2:2002

PN-EN 25663:2001

PN-EN 25813:1997

PN-EN 26777:1999

PN-EN 27888:1999

PN-EN 872:2007+Ap1:2007

PN-EN ISO 10301:2002

PN-EN ISO 10390:2022-09

PN-EN ISO 10523:2012

PN-EN ISO 11079:2008

PN-EN ISO 11969:1999

PN-EN ISO 12020:2002

PN-EN ISO 12846:2012 +Ap1:2016-07 cl. 7

PN-EN ISO 15586:2005

PN-EN ISO 17993:2005

PN-EN ISO 19458:2007 excluding cl. 4.4.3, 4.4.4., 4.4.5 and 4.4.6

PN-EN ISO 3746:2011

PN-EN ISO 3746:2011/Ap1:2017-09 excluding cl. 8.4

PN-EN ISO 5349-1:2004

PN-EN ISO 5349-2:2004

PN-EN ISO 5349-2:2004/A1:2015-11

PN-EN ISO 5667-13:2011 excluding cl. 6.3.3, 6.3.7

PN-EN ISO 5667-6:2016-12 excluding cl. 7.5 and 7.6

PN-EN ISO 5815-1:2019-12

PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010

PN-EN ISO 7027-1:2016-09

PN-EN ISO 7243:2018-01

PN-EN ISO 7730:2006+Ap2:2016-04

PN-EN ISO 7887:2012 Method C + Ap1:2015-06

PN-EN ISO 7980:2002

PN-EN ISO 9377-2:2003

PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11

PN-EN ISO 9963-1:2001+Ap1:2004

PN-ISO 10381-4:2007

PN-ISO 10381-5:2009

PN-ISO 11047:2001

PN-ISO 11261:2002

PN-ISO 11265:1997+AC1:1997

PN-ISO 11465:1999

PN-ISO 1233:2000

PN-ISO 15705:2005

PN-ISO 16772:2009

PN-ISO 20280:2010

PN-ISO 5664:2002

PN-ISO 5667-10: 2021-11

PN-ISO 5667-5:2017-10

PN-ISO 6058:1999

PN-ISO 6059:1999

PN-ISO 6332:2001+Ap1:2016-06

PN-ISO 6439:1994 Method A

PN-ISO 7150-1:2002

PN-ISO 8288:2002 Method A

PN-ISO 9280:2002

PN-ISO 9297:1994

PN-ISO 9964-3:1994+Ak:1997

PN-N-01307:1994

PN-R-04023:1996

PN-R-04028:1997

PN-Z-04008-4:1999

PN-Z-04008-7:2002+Az1:2004

PN-Z-04030-7:1994

PN-Z-04434:2011

PN-Z-04469:2025-02

PN-Z-04472:2015-10+Ap1:2015-12

PN-Z-04502:2019-10

PN-Z-04507:2022-05

PN-Z-04507:2022-05/Ap1:2022-08

PN-Z-04508:2022-05

PN-Z-04508:2022-05/Ap1:2022-08

Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130

Annex 3 to the Regulation of the Minister of the Environment of 16.06.2011 (Journal of Laws No. 140, item 824 and No. 288, item 1697)

Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706)

based on the Pocket Colorimeter II Hach Lange test

based on the Hach Lange LCK315 cuvette test

based on the Hach Lange cuvette test LCK385 and 386

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AB%20894