🇵🇱 LABORATORIUM BADAŃ I POMIARÓW ŚRODOWISKA PL
Environment
LABORATORIUM BADAŃ I POMIARÓW ŚRODOWISKA is a laboratory accredited by PCA under number AB 875 (Łódź, Poland). Its accreditation scope covers 215 test methods in the following areas: Environment. Test objects include: Waste gases, Workplace environment - air - air samples collected on sorbent tubes, Workplace environment - air - air samples collected on a filter, Workplace environment - air - air samples collected into absorbing…. Most frequently used techniques: Gas chromatography with flame ionization detection (GC-FID), Spectrophotometric method, Flame atomic absorption spectrometry (FAAS).
At a glance
- Accreditation number: PCA AB 875
- Methods in scope: 215
- Types of test objects: 20
- Techniques used: 22
- City: Łódź, Poland
- Accreditation number
- AB 875
- Accreditation body
- PCA
- Address
- EKOLAB Spółka Cywilna, Janusz Michalak, Grażyna Felisiak, Anna Wysocka, ul. Dzika 27A, 91-459 Łódź
- City
- Łódź, Poland
What this laboratory tests (20)
- Waste gases — 81 methods
- Workplace environment - air - air samples collected on sorbent tubes — 29 methods
- Workplace environment - air - air samples collected on a filter — 23 methods
- Workplace environment - air - air samples collected into absorbing solution — 21 methods
- General environment - waste gas samples collected into absorbing solution — 12 methods
- General environment - waste gas samples collected on sorbent tubes — 9 methods
- General environment - waste gas samples collected on a filter — 7 methods
- Workplace environment - air — 7 methods
- Waste gases, General environment - waste gas samples collected on sorbent tubes — 6 methods
- Workplace environment - emergency lighting — 3 methods
- Workplace environment - cold microclimate — 2 methods
- Workplace environment - hand-arm vibration — 2 methods
- Workplace environment - hot microclimate — 2 methods
- Workplace environment - indoor electric lighting — 2 methods
- Workplace environment - moderate microclimate — 2 methods
- and 5 more
Analytical techniques used (22)
- Gas chromatography with flame ionization detection (GC-FID) — 50 methods
- Spectrophotometric method — 33 methods
- Flame atomic absorption spectrometry (FAAS) — 23 methods
- Aspiration method — 19 methods
- Direct measurement method — 8 methods
- Potentiometric method — 6 methods
- High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) — 5 methods
- High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) — 5 methods
- Cold vapour atomic absorption spectrometry (CVAAS) — 4 methods
- High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) — 4 methods
- Gas chromatography with mass spectrometry detection (GC-MS) — 3 methods
- Gravimetric method — 3 methods
- Adsorption method — 1 method
- Aspiration method using activated carbon — 1 method
- Calculation method — 1 method
- and 7 more
Certificate information
- Issue date
- 29.01.2026
- Issue no.
- 22
Accreditation scope — test methods (215)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Workplace environment - air | Sampling for the assessment of occupational exposure to dust agents – inhalable fraction – respirable fraction organic substances, including – inhalable fraction inorganic substances, including – inhalable fraction – respirable fraction metals and their compounds, including – inhalable fraction – respirable fraction |
Stationary method; Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 2 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 3 | Workplace environment - air | Carbon monoxide concentration Range (2 - 200) mg/m3 Range (2 – 172) ppm |
Electrochemical method | Test procedure PB 398 issue 2 of 02.05.2013 | |
| 4 | Workplace environment - air | Exposure indices (calculated) | Test procedure PB 398 issue 2 of 02.05.2013 | ||
| 5 | Workplace environment - air | Concentration of harmful dust agents inhalable fraction – petroleum bitumen – apatites and phosphorites – Portland cement – titanium dioxide – natural graphite – synthetic graphite – kaolin – amorphous and synthetic silica – wood dusts – flour dusts – dusts not classified according to toxicity – organic dusts of animal and plant origin excluding wood and flour dusts – calcium sulphate(VI) (gypsum) – carbon black – talc – coal (hard, brown) – calcium magnesium carbonate (dolomite) – silicon carbide, non-fibrous Range (0,17-20,45) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05+Ap1:2022-08 | |
| 6 | Workplace environment - air | Concentration of harmful dust agents respirable fraction – apatites and phosphorites – Portland cement – natural graphite – amorphous and synthetic silica – organic dusts of animal and plant origin excluding wood and flour dusts – talc – coal (hard, brown) Range (0,09-15,43) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05+Ap1:2022-08 | |
| 7 | Workplace environment - air | Concentration/content of crystalline silica (quartz, cristobalite) respirable fraction Range (0,008 – 0,56) mg/m3 Range (0,005 – 0,4) mg in the sample |
Fourier transform infrared spectrometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130 | |
| 8 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylaldehyde Range (0,013 - 8,0) mg/m3 Range (0.0056 – 3,44) ppm Range (0,0001 - 0,0060) mg in the sample |
Spectrophotometric method | Test procedure PB 006 issue 4 of 02.05.2013 | |
| 9 | Workplace environment - air - air samples collected into absorbing solution | Ammonia concentration/content Range (1 - 100) mg/m3 Range (0,01 - 0,2) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 10 | Workplace environment - air - air samples collected into absorbing solution | Chlorine concentration/content Range (0,055 - 10) mg/m3 Range (0,0004 - 0,05) mg in the sample |
Spectrophotometric method | PN-75/Z-04037.03 | |
| 11 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen chloride concentration/content Range (0,33 - 50) mg/m3 Range (0,005 - 0,2) mg in the sample |
Spectrophotometric method | Test procedure PB 089 issue 2 of 02.05.2013 | |
| 12 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of tetraphosphorus decaoxide Range (0,067 - 10) mg/m3 Range (0,001 - 0,02) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 | |
| 13 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen dioxide concentration/content Range (0,067 - 10,7) mg/m3 Range (0,035 – 5,61) ppm Range (0,00025 - 0,040) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 14 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen peroxide concentration/content Range (0,025 – 5,0) mg/m3 Range (0,0005 - 0,10) mg in the sample |
Spectrophotometric method | Test procedure PB 299 issue 5 of 02.05.2023 | |
| 15 | Workplace environment - air - air samples collected into absorbing solution | Sulphur dioxide concentration/content Range (0,07 - 12) mg/m3 Range (0,026 – 4,52) ppm Range (0,001 - 0,02) mg in the sample |
Spectrophotometric method | PN-Z-04015-12:1996 | |
| 16 | Workplace environment - air - air samples collected into absorbing solution | Formaldehyde concentration/content Range (0,013 - 3,2) mg/m3 Range (0,0001 - 0,004) mg in the sample |
Spectrophotometric method | Test procedure PB 196 issue 4 of 02.05.2013 | |
| 17 | Workplace environment - air - air samples collected into absorbing solution | Phosphoric(V) acid concentration/content Range (0,092 - 15) mg/m3 Range (0,0014 - 0,028) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 | |
| 18 | Workplace environment - air - air samples collected into absorbing solution | Formic acid concentration/content Range (0,33 - 40) mg/m3 Range (0,0025 - 0,075) mg in the sample |
Spectrophotometric method | PN-88/Z-04196.02 | |
| 19 | Workplace environment - air - air samples collected into absorbing solution | Ozone concentration/content Range (0,013 – 10) mg/m3 Range (0,0002 – 0,005) mg in the sample |
Spectrophotometric method | Test procedure PB 341 issue 5 of 02.05.2013 | |
| 20 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen sulphide concentration/content Range (0,67 - 33,3) mg/m3 Range (0,005 - 0,050) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 21 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen monoxide concentration/content Range (0,044 - 7,0) mg/m3 Range (0,035 – 5,62) ppm Range (0,00016 - 0,026) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 22 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide) Range (0,063 - 12,5) mg/m3 Range (0,056 – 11,16) ppm Range (0,0005 - 0,05) mg in the sample |
Potentiometric method | Test procedure PB 094A issue 3 of 02.05.2013 | |
| 23 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content: hydrogen fluoride fluorides expressed as F- Range (0,033 - 13,3) mg/m3 Range (0,001 - 0,1) mg in the sample |
Potentiometric method | Test procedure PB 192 issue 5 of 02.05.2013 | |
| 24 | Workplace environment - air - air samples collected into absorbing solution | Potassium hydroxide concentration/content Range (0,05 - 9,5) mg/m3 Range (0,0007 - 0,014) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04005.05 | |
| 25 | Workplace environment - air - air samples collected into absorbing solution | Sodium hydroxide concentration/content Range (0,06 - 11,6) mg/m3 Range (0,0009 - 0,018) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-88/Z-04005.06 | |
| 26 | Workplace environment - air - air samples collected into absorbing solution | Ethanol concentration/content Range (40 - 3200) mg/m3 Range (0,8 - 64) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-85/Z-04140/02 | |
| 27 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylamide Range (0,017 – 3,300) mg/m3 Range (0,0010 - 0,0198) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 007 issue 3 of 02.05.2013 | |
| 28 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylamide Range (0,0068- 2,7) mg/m3 Range (0,00081- 0,135) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | PN-Z-04486:2017-10 | |
| 29 | Workplace environment - air - air samples collected into absorbing solution - air samples collected on sorbent tubes | Methanol concentration/content Range (8,0 – 600,0) mg/m3 Range (0,080 – 6,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04476:2016-10 | PN-81/Z-04028.01 | |
| 30 | Workplace environment - air - air samples collected on sorbent tubes and on a filter | Concentration/content of mercury, its vapours and inorganic compounds - calculated as Hg Range (0,002 - 1) mg/m3 Range (0,0001– 0,006) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-Z-04332:2006 test procedure PB 366 issue 6 of 02.05.2022 | |
| 31 | Workplace environment - air - air samples collected on sorbent tubes | Formaldehyde concentration/content Range (0,030- 10,0) mg/m3 Range (0,00030- 0,020) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Test procedure PB 006A issue 2 of 02.05.2013 | |
| 32 | Workplace environment - air - air samples collected on sorbent tubes | N,N-Dimethylformamide concentration/content Range (1,50 – 120,0) mg/m3 Range (0,495 – 39,62) ppm Range (0,0075- 0,30) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Test procedure PB 148A issue 1 of 02.05.2024 | |
| 33 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of ethyl acrylate Range (2,0 - 200) mg/m3 Range (0,04 - 4,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04113/02 | |
| 34 | Workplace environment - air - air samples collected on sorbent tubes | Methyl acrylate concentration/content Range (1,0 - 100) mg/m3 Range (0,02 - 2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04113/05 | |
| 35 | Workplace environment - air - air samples collected on sorbent tubes | White spirit concentration/content Range (30 - 1800) mg/m3 Range (0,6 - 18) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134.03 | |
| 36 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of chloroethene Range (0,5 - 64) mg/m3 Range (0,01 - 1,3) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04112/01 | |
| 37 | Workplace environment - air - air samples collected on sorbent tubes | Dichloromethane concentration/content Range (2,5 - 200) mg/m3 Range (0,05 - 4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-77/Z-04110/01 | |
| 38 | Workplace environment - air - air samples collected on sorbent tubes | Ethylene oxide concentration/content Range (0,1 - 10) mg/m3 Range (0,055 – 5,5) ppm Range (0,002 - 0,2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04300:2002 | |
| 39 | Workplace environment - air - air samples collected on sorbent tubes | Phenol concentration/content Range (0,1 - 16) mg/m3 Range (0,002 - 0,32) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04159/10 | |
| 40 | Workplace environment - air - air samples collected on sorbent tubes | Ethylene glycol concentration/content Range (1,5 - 150) mg/m3 Range (0,03 - 3) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 1997, No. 17 pp. 55 – 59 | |
| 41 | Workplace environment - air - air samples collected on sorbent tubes | Acetic acid concentration/content Range (0,5 - 100) mg/m3 Range (0,20 – 40,17) ppm Range (0,025 - 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | |
| 42 | Workplace environment - air - air samples collected on sorbent tubes | Methyl methacrylate concentration/content Range (5 - 560) mg/m3 Range (0,1 - 11) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04113/09 | |
| 43 | Workplace environment - air - air samples collected on sorbent tubes | Kerosene concentration/content Range (10 - 1000) mg/m3 Range (0,2 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227.02 | |
| 44 | Workplace environment - air - air samples collected on sorbent tubes | Vinyl acetate concentration/content Range (1 - 80) mg/m3 Range (0,02 - 1,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-87/Z-04178/02 | |
| 45 | Workplace environment - air - air samples collected on sorbent tubes | Pentane concentration/content Range (50 - 5000) mg/m3 Range (1 - 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04318:2005 | |
| 46 | Workplace environment - air - air samples collected on sorbent tubes | Tetrachloroethene concentration/content Range (5 - 1000) mg/m3 Range (0,73 – 145,2) ppm Range (0,1 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-83/Z-04118/02 | |
| 47 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of desflurane Range (4,0 – 900,0) mg/m3 Range (0,020 – 9,6) mg in the sample |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04422:2010 | |
| 48 | Workplace environment - air - air samples collected on sorbent tubes | Isoflurane concentration/content Range (1,0 – 240,0) mg/m3 Range (0,005 – 0,240) mg in the sample |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04423:2011 | |
| 49 | Workplace environment - air - air samples collected on sorbent tubes | Sevoflurane concentration/content Range (2,0 – 450,0) mg/m3 Range (0,01 – 0,450) mg in the sample |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-Z-04429:2011 | |
| 50 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of butane Range (20,0 – 6000) mg/m3 Range (0,060 – 4,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 51 | Workplace environment - air - air samples collected on sorbent tubes | Propane concentration/content Range (20 – 4000) mg/m3 Range (0,06 – 3,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 52 | Workplace environment - air - air samples collected on sorbent tubes | Benzene concentration/content Range (0,1 - 20) mg/m3 Range (0,031 – 6,18) ppm Range (0,002 - 0,4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 53 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: cyclohexanone, styrene Range (2,5 - 500) mg/m3 Range (0,05 - 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 54 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-methylpropan-1-ol (isobutanol) Range (5,0 – 500,0) mg/m3 Range (0,10 – 5,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023-02 | NIOSH 1401:1994 | |
| 55 | Workplace environment - air - air samples collected on sorbent tubes | 2-butoxyethanol concentration/content Range (5 - 1000) mg/m3 Range (0,1- 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 56 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (5 - 500) mg/m3 Range (0,1 - 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 57 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (10 - 1000) mg/m3 Range (0,2 - 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 58 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: butan-2-one n-butyl acetate propan-1-ol propan-2-ol Range (10 - 1500) mg/m3 Range (0,2 - 15) mg in the sample ethyl acetate Range (10 - 1500) mg/m3 Range (2,74 – 410,8) ppm Range (0,2 - 15) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 59 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (10 - 2000) mg/m3 Range (0,2 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 025 issue 3 of 02.05.2013 | |
| 60 | Workplace environment - air - air samples collected on a filter | Concentration/content of aluminium trioxide – calculated as Al – inhalable fraction – respirable fraction Range (0,018 – 8,0) mg/m3 Range (0,00025 - 0,010) mg in the sample |
Spectrophotometric method | Test procedure PB 425 issue 4 of 02.05.2013 | |
| 61 | Workplace environment - air - air samples collected on a filter | Concentration/content of highly refined mineral oils excluding metalworking fluids – inhalable fraction Range (0,28 - 22,4) mg/m3 Range (0,15 - 10,2) mg in the sample |
Spectrophotometric method | PN-Z-04108-6:2006+Az1:2009 | |
| 62 | Workplace environment - air - air samples collected on a filter | Concentration/content of chromium (VI) compounds – calculated as Cr (VI) Range (0,0007 – 0,08) mg/m3 Range (0,0005 - 0,625) mg in the sample |
Spectrophotometric method | NIOSH 7600:2015 | |
| 63 | Workplace environment - air - air samples collected on a filter | Concentration/content of chromium and its compounds (chromium (II), (III), (VI)) – calculated as Cr Range (0,001 – 2,5) mg/m3 Range (0,0005 - 0,625) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 092 issue 2 of 02.05.2013 | |
| 64 | Workplace environment - air - air samples collected on a filter | Concentration of metallic chromium, chromium compounds: chromium (II) – calculated as Cr (II), chromium (III) – calculated as Cr (III) | Calculation method | Test procedure PB 90 issue 1 of 02.05.2021 | |
| 65 | Workplace environment - air - air samples collected on a filter | Concentration/content of tin and its inorganic compounds, except stannane – calculated as Sn – inhalable fraction Range (0,125 – 20) mg/m3 Range (0,05 - 6) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04488:2017-10 | |
| 66 | Workplace environment - air - air samples collected on a filter | Concentration/content of cadmium and its inorganic compounds – calculated as Cd inhalable fraction respirable fraction Range (0,0002 - 0,027) mg/m3 Range (0,0001- 0,2) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04102-3:2013-10 | |
| 67 | Workplace environment - air - air samples collected on a filter | Concentration/content of manganese and its inorganic compounds – expressed as Mn inhalable fraction respirable fraction Range (0,004- 2,5) mg/m3 Range (0,0015 - 0,45) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10+Ap1:2015-12 | |
| 68 | Workplace environment - air - air samples collected on a filter | Concentration/content of copper and its inorganic compounds – calculated as Cu Range (0,0014 - 0,5) mg/m3 Range (0,0005 - 0,1) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04106-3:2002 | |
| 69 | Workplace environment - air - air samples collected on a filter | Concentration/content of nickel and its compounds, except nickel tetracarbonyl – calculated as Ni Range (0,007 - 1,3) mg/m3 Range (0,0025 - 0,4) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019-10 | |
| 70 | Workplace environment - air - air samples collected on a filter | Concentration/content of lead and its inorganic compounds, excluding lead (II) arsenate (V) and lead (II) chromate (VI) - calculated as Pb inhalable fraction Range (0,004 - 0,3) mg/m3 Range (0,002 - 0,5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04487:2017-10 | |
| 71 | Workplace environment - air - air samples collected on a filter | Concentration/content of silver - inhalable fraction, insoluble silver compounds – calculated as Ag, soluble silver compounds – calculated as Ag Range (0,001 - 0,3) mg/m3 Range (0,001 - 0,4) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04216-2:2012 Principles and Methods of Assessing the Working Environment 1998, No. 19 pp. 165 – 169 | |
| 72 | Workplace environment - air - air samples collected on a filter | Concentration/content of zinc oxide – calculated as Zn – inhalable fraction Range (0,03 - 20) mg/m3 Range (0,002 - 0,2) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04100/03 | |
| 73 | Workplace environment - air - air samples collected on a filter | Calcium oxide concentration/content inhalable fraction respirable fraction Range (0,04 - 12) mg/m3 Range (0,007 - 1) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04442:2023-05 | |
| 74 | Workplace environment - air - air samples collected on a filter | Concentration/content of iron oxides – calculated as Fe – respirable fraction – inhalable fraction Range (0,25 - 30) mg/m3 Range (0,005 - 1,2) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2015-10 | |
| 75 | Workplace environment - air - air samples collected on a filter | Potassium hydroxide concentration/content Range (0,004 – 4,8) mg/m3 Range (0,0014 – 0,14) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 76 | Workplace environment - air - air samples collected on a filter | Sodium hydroxide concentration/content Range (0,005 – 5,8) mg/m3 Range (0,0017 – 0,17) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 77 | Workplace environment - air - air samples collected on a filter | Concentration/content of highly refined mineral oils excluding metalworking fluids – inhalable fraction Range (0,28 – 22,4) mg/m3 Range (0,15 - 10,2) mg in the sample |
Infrared spectrometry (FT-IR) | PN-Z-04108-5:2006 | |
| 78 | Workplace environment - air - air samples collected on a filter | Concentration/content of dibutyl phthalate – inhalable fraction Range (0,5 - 20) mg/m3 Range (0,25 - 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04208/04 | |
| 79 | Workplace environment - air - air samples collected on a filter | Bis(2-ethylhexyl) phthalate concentration/content Range (0,1 - 20) mg/m3 Range (0,05 - 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04208/05 | |
| 80 | Workplace environment - air - air samples collected on a filter | Concentration/content of toluene-2,4-diyl diisocyanate (2,4-TDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | PN-Z-04490:2017-10 | |
| 81 | Workplace environment - air - air samples collected on a filter | Concentration/content of toluene-2,6-diyl diisocyanate (2,6-TDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | PN-Z-04490:2017-10 | |
| 82 | Workplace environment - air - air samples collected on a filter | Concentration/content of methylenebis (phenyl isocyanate) (MDI) Range (0,0005 – 1,33) mg/m3 Range (0,0001 – 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 83 | Workplace environment - indoor electric lighting | Illuminance Range (0,5 – 9000) lx |
Direct measurement method | Test procedure PB 12464 issue 3 of 02.05.2016 | |
| 84 | Workplace environment - indoor electric lighting | Illuminance uniformity (calculated) | Test procedure PB 12464 issue 3 of 02.05.2016 | ||
| 85 | Workplace environment - emergency lighting | Illuminance Range (0,5 – 1000) lx |
Direct measurement method | PN-EN 1838:2025-05 Method A | |
| 86 | Workplace environment - emergency lighting | Ratio of minimum to maximum illuminance (calculated) | PN-EN 1838:2025-05 Method A | ||
| 87 | Workplace environment - emergency lighting | Illuminance uniformity for the high-risk zone (calculated) | PN-EN 1838:2025-05 Method A | ||
| 88 | Workplace environment - moderate microclimate | Air temperature: Range (10 – 30) °C Black globe temperature: Range (10 – 40) °C Air humidity: Range (20 – 90) % Air velocity: Range (0,15 – 5) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | |
| 89 | Workplace environment - moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | ||
| 90 | Workplace environment - hot microclimate | Air temperature: Range (10 – 60) °C Natural wet bulb temperature: Range (10 – 60) °C Black globe temperature: Range (10 – 60) °C |
Direct measurement method | PN-EN ISO 7243:2018 -01 | |
| 91 | Workplace environment - hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018 -01 | ||
| 92 | Workplace environment - cold microclimate | Air temperature: Range (- 30 – 10) °C Black globe temperature: Range (- 30 – 15) °C Air humidity: Range (20 – 90) % Air velocity: Range (0,15 – 5) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 93 | Workplace environment - cold microclimate | tWC index, IREQmin index, IREQneutral index (calculated) | PN-EN ISO 11079:2008 | ||
| 94 | Workplace environment - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (30 - 135) dB C-weighted peak sound pressure level Range (50 - 140) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 | |
| 95 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 | ||
| 96 | Workplace environment - hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,32 – 300) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004 / A1:2015 | |
| 97 | Workplace environment - hand-arm vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the vector sum of the r.m.s. frequency-corrected vibration accelerations determined for three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes or less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004 / A1:2015 | ||
| 98 | Workplace environment - whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,04 – 35) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 99 | Workplace environment - whole-body vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the r.m.s. frequency-corrected vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz), Exposure lasting 30 minutes or less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 100 | Waste gases | Gas volume flow rate for dynamic pressures > 10 Pa Velocity Range (0,5 – 20,0) m/s |
Stagnation pressure method; Thermoanemometric method | PN-Z-04030-7:1994 | |
| 101 | Waste gases | Sampling for determination of concentrations of organic compounds | Aspiration method using activated carbon | PN-Z-04008-4:1999 | |
| 102 | Waste gases | Concentration of oxygen, carbon monoxide, nitrogen monoxide, nitrogen dioxide, sulphur dioxide SO2, CO2, NO, CO, O2, NO2: SO2 (9 - 1500) mg/m3 CO2 ( 0 , 1 – 1 4 ) % NO ( 1 3 - 7 0 0 ) m g/m3 NO2 (8 – 40) mg/m3 CO (25 – 1000) mg/m3 O2 Range (3 - 15) % |
Non-dispersive infrared spectrometry (NDIR); Electrochemical method | PN ISO 10396:2001 | |
| 103 | Waste gases | Emission of CO, NO and NO2, NOx (NO and NO2 calculated as NO2 ), SO2, CO2 (calculated) | PN ISO 10396:2001 | ||
| 104 | Waste gases | Total organic carbon concentration (TVOC) Range (0,6 – 1000) mg/m3 |
Continuous flame ionization detection method (FID) | PN-EN 12619:2013-05 | |
| 105 | Waste gases | TVOC emission (calculated) | PN-EN 12619:2013-05 | ||
| 106 | Waste gases | Sampling for determination of dust concentration | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | ||
| 107 | Waste gases | Dust concentration Range (0,5 - 50) mg/m3 |
Gravimetric method | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | |
| 108 | Waste gases | Dust emission (calculated) | PN-EN 13284-1:2018-02 CEN/TR 17078:2017 | ||
| 109 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds | PN-EN 13649:2005 | ||
| 110 | Waste gases | Benzene concentration Range (0,1 - 20) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 111 | Waste gases | Concentration: cyclohexanone, styrene Range (2,5 - 500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 112 | Waste gases | Concentration: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (10 - 1000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 113 | Waste gases | Concentration: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (5 - 500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 114 | Waste gases | 2-butoxyethanol concentration Range (5 - 1000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 115 | Waste gases | Concentration: butan-2-one n-butyl acetate ethyl acetate propan-1-ol propan-2-ol Range (10 - 1500) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 116 | Waste gases | Concentration: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (10 - 2000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 117 | Waste gases | Emission of the above-mentioned organic compounds (calculated) | PN-EN 13649:2005 | ||
| 118 | Waste gases | Sampling for the determination of mercury concentration | PN-EN 13211+AC:2006 | ||
| 119 | Waste gases | Mercury concentration Range (0,00042 – 1,0) mg/m3 Range (0,000025 – 0,06) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 120 | Waste gases | Mercury emission (calculated) | PN-EN 13211+AC:2006 | ||
| 121 | Waste gases | Sampling for determination of methanol | PN-EN 13649:2005 | ||
| 122 | Waste gases | Methanol concentration Range (8 – 600) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 123 | Waste gases | Methanol emission (calculated) | PN-EN 13649:2005 | ||
| 124 | Waste gases | Sampling for the determination of hydrogen chloride | PN-EN 1911:2011 | ||
| 125 | Waste gases | Hydrogen chloride concentration Range (0,67 - 50) mg/m3 |
Spectrophotometric method | PN-EN 1911:2011 | |
| 126 | Waste gases | Hydrogen chloride emission (calculated) | PN-EN 1911:2011 | ||
| 127 | Waste gases | Water vapour content Range (29 – 250) g/m3 Range (4 – 40) % |
Adsorption method | PN-EN 14790:2017-04 | |
| 128 | Waste gases | Sampling for determination of chromium concentration in dust | Aspiration method | Test procedure PB 092 issue 2 of 02.05.2013 | |
| 129 | Waste gases | Chromium concentration in dust Range (0,006 – 2,5) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 092 issue 2 of 02.05.2013 | |
| 130 | Waste gases | Emission of chromium in dust (calculated) | Test procedure PB 092 issue 2 of 02.05.2013 | ||
| 131 | Waste gases | Sampling for determination of tin concentration in dust | Aspiration method | Test procedure PB 095 issue 2 of 02.05.2013 | |
| 132 | Waste gases | Tin concentration in dust Range (0,125 – 20) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 095 issue 2 of 02.05.2013 | |
| 133 | Waste gases | Emission of tin in dust (calculated) | Test procedure PB 095 issue 2 of 02.05.2013 | ||
| 134 | Waste gases | Sampling for the determination of hydrogen sulphide | Aspiration method | Test procedure PB 370 issue 5 of 02.05.2013 | |
| 135 | Waste gases | Hydrogen sulphide concentration Range (0,67 - 33,3) mg/m3 |
Spectrophotometric method | Test procedure PB 370 issue 5 of 02.05.2013 | |
| 136 | Waste gases | Hydrogen sulphide emission (calculated) | Test procedure PB 370 issue 5 of 02.05.2013 | ||
| 137 | Waste gases | Sampling for determination of formaldehyde concentration | Aspiration method | CEN/TS 17638:2021 test procedure PB 197 issue 2 of 21.11.2022 | |
| 138 | Waste gases | Formaldehyde concentration Range (0,050 – 10,0) mg/m3 |
Spectrophotometric method | CEN/TS 17638:2021 test procedure PB 197 issue 2 of 21.11.2022 | |
| 139 | Waste gases | Formaldehyde emission (calculated) | CEN/TS 17638:2021 test procedure PB 197 issue 2 of 21.11.2022 | ||
| 140 | Waste gases | Sampling for determination of hydrogen cyanide and cyanides – expressed as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) | Aspiration method | Test procedure PB 094A issue 3 of 02.05.2013 | |
| 141 | Waste gases | Concentration of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) Range (0,063 - 12,5) mg/m3 |
Potentiometric method | Test procedure PB 094A issue 3 of 02.05.2013 | |
| 142 | Waste gases | Emission of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) (calculated) | Test procedure PB 094A issue 3 of 02.05.2013 | ||
| 143 | Waste gases | Sampling for determination of the concentration of 4,4’-methylenebis(phenyl isocyanate) (MDI), toluene-2,4-diyl diisocyanate (2,4-TDI), toluene-2,6-diyl diisocyanate (2,6-TDI) | Aspiration method | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 144 | Waste gases | 4,4’-methylenebis (phenyl isocyanate) (MDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 145 | Waste gases | Toluene-2,4-diyl diisocyanate (2,4-TDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 146 | Waste gases | Toluene-2,6-diyl diisocyanate (2,6-TDI) concentration Range (0,0005 – 1,33) mg/m3 |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 147 | Waste gases | Emission of 4,4’-methylenebis(phenyl isocyanate) (MDI), toluene-2,4-diyl diisocyanate (2,4-TDI), toluene-2,6-diyl diisocyanate (2,6-TDI) (calculated) | Test procedure PB 136A issue 2 of 02.05.2013 | ||
| 148 | Waste gases | Sampling for the determination of formaldehyde | Aspiration method | Test procedure PB 006A issue 2 of 02.05.2013 | |
| 149 | Waste gases | Formaldehyde concentration Range (0,030 – 10,0) mg/m3 |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Test procedure PB 006A issue 2 of 02.05.2013 | |
| 150 | Waste gases | Formaldehyde emission (calculated) | Test procedure PB 006A issue 2 of 02.05.2013 | ||
| 151 | Waste gases | Sampling for determination of hydrogen fluoride and fluorides expressed as F- | Aspiration method | Test procedure PB 192 issue 5 of 02.05.2013 | |
| 152 | Waste gases | Concentration of hydrogen fluoride and fluorides calculated as F- Range (0,033 - 13,3) mg/m3 |
Potentiometric method | Test procedure PB 192 issue 5 of 02.05.2013 | |
| 153 | Waste gases | Emission of hydrogen fluoride and fluorides calculated as F-(calculated) | Test procedure PB 192 issue 5 of 02.05.2013 | ||
| 154 | Waste gases | Sampling for determination of methanol | Aspiration method | Test procedure PB 272 issue 2 of 02.05.2013 | |
| 155 | Waste gases | Methanol concentration Range (8 – 400) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 272 issue 2 of 02.05.2013 | |
| 156 | Waste gases | Methanol emission (calculated) | Test procedure PB 272 issue 2 of 02.05.2013 | ||
| 157 | Waste gases | Sampling for determination of the concentration of 2-methylpropan-1-ol (isobutanol) | Aspiration method | PN-EN 13649:2005 | NIOSH 1401:1994 | |
| 158 | Waste gases | 2-methylpropan-1-ol (isobutanol) concentration Range (5,0 – 500,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | NIOSH 1401:1994 | |
| 159 | Waste gases | Emission of 2-methylpropan-1-ol (isobutanol) (calculated) | PN-EN 13649:2005 | NIOSH 1401:1994 | ||
| 160 | Waste gases | Sampling for determination of ammonia concentration | Aspiration method | Test procedure PB 019 issue 4 of 02.05.2013 | PN-EN ISO 21877:2020-03 | |
| 161 | Waste gases | Ammonia concentration Range (0,02 – 80) mg/m3 |
Spectrophotometric method | Test procedure PB 019 issue 4 of 02.05.2013 | PN-EN ISO 21877:2020-03 | |
| 162 | Waste gases | Ammonia emission (calculated) | Test procedure PB 019 issue 4 of 02.05.2013 | PN-EN ISO 21877:2020-03 | ||
| 163 | Waste gases | Sampling for the determination of chlorine concentration | Aspiration method | Test procedure PB 062 issue 3 of 02.05.2013 | |
| 164 | Waste gases | Chlorine concentration Range (0,13 – 10) mg/m3 |
Spectrophotometric method | Test procedure PB 062 issue 3 of 02.05.2013 | |
| 165 | Waste gases | Chlorine emission (calculated) | Test procedure PB 062 issue 3 of 02.05.2013 | ||
| 166 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Sampling for determination of butane concentration | Aspiration method | PN-Z-04252-1:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 167 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Concentration/content of butane Range (20,0 - 6000) mg/m3 Range (0,060 – 4,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 168 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Emission of butane (calculated) | PN-Z-04252-1:2012 test procedure PB 052 issue 2 of 02.05.2013 | ||
| 169 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Sampling for determination of propane concentration | Aspiration method | PN-Z-04252-2:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 170 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Propane concentration/content Range (20 – 4000) mg/m3 Range (0,06 – 3,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 test procedure PB 052 issue 2 of 02.05.2013 | |
| 171 | Waste gases, General environment - waste gas samples collected on sorbent tubes | Emission of propane (calculated) | PN-Z-04252-2:2012 test procedure PB 052 issue 2 of 02.05.2013 | ||
| 172 | Waste gases | Sampling for determination of the concentration of sulfuric (VI) acid and sulfur trioxide | Aspiration method | Test procedure PB 270 issue 2 of 02.05.2013 | |
| 173 | Waste gases | Sulphuric acid (VI) and sulphur trioxide concentration Range (0,05 - 10) mg/m3 |
Spectrophotometric method | Test procedure PB 270 issue 2 of 02.05.2013 | |
| 174 | Waste gases | Emission of sulphuric acid and sulphur trioxide (calculated) | Test procedure PB 270 issue 2 of 02.05.2013 | ||
| 175 | Waste gases | Sampling for the determination of ozone concentration | Aspiration method | Test procedure PB 341 issue 5 of 02.05.2013 | |
| 176 | Waste gases | Ozone concentration Range (0,013 - 10) mg/m3 |
Spectrophotometric method | Test procedure PB 341 issue 5 of 02.05.2013 | |
| 177 | Waste gases | Ozone emission (calculated) | Test procedure PB 341 issue 5 of 02.05.2013 | ||
| 178 | Waste gases | Sampling for determination of the concentration of chromium (VI) compounds expressed as chromium (VI) | Aspiration method | Test procedure PB 093 issue 2 of 23.11.2021 | |
| 179 | Waste gases | Concentration of chromium (VI) compounds – calculated as Cr (VI) Range (0,0005 - 0,6) mg/m3 |
Spectrophotometric method | NIOSH 7600:2015 | |
| 180 | Waste gases | Emission of chromium (VI) compounds calculated as chromium (VI) (calculated) | Test procedure PB 093 issue 2 of 23.11.2021 | ||
| 181 | Waste gases | Sampling for determination of potassium hydroxide concentration | Aspiration method | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 182 | Waste gases | Potassium hydroxide concentration Range (0,05 - 9,5) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 183 | Waste gases | Emission of potassium hydroxide (calculated) | Test procedure PB 435 issue 2 of 02.05.2013 | ||
| 184 | Waste gases | Sampling for determination of sodium hydroxide concentration | Aspiration method | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 185 | Waste gases | Sodium hydroxide concentration Range (0,06 - 11,6) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 186 | Waste gases | Emission of sodium hydroxide (calculated) | Test procedure PB 435 issue 2 of 02.05.2013 | ||
| 187 | General environment - waste gas samples collected on a filter | Chromium content Range (0,0025 – 0,625) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 092 issue 2 of 02.05.2013 | |
| 188 | General environment - waste gas samples collected on a filter | Tin content Range (0,05 – 6) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 095 issue 2 of 02.05.2013 | |
| 189 | General environment - waste gas samples collected on a filter | 4,4’-methylenebis (phenyl isocyanate) (MDI) content Range (0,0001 - 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC-FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 190 | General environment - waste gas samples collected on a filter | Toluene-2,4-diyl diisocyanate (2,4-TDI) content Range (0,0001 - 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 191 | General environment - waste gas samples collected on a filter | Toluene-2,6-diyl diisocyanate (2,6-TDI) content Range (0,0001 - 0,02) mg in the sample |
High-performance liquid chromatography with fluorimetric detection (HPLC- FLD) | Test procedure PB 136A issue 2 of 02.05.2013 | |
| 192 | General environment - waste gas samples collected on a filter | Mercury content Range (0,000025 - 0,06) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 193 | General environment - waste gas samples collected on a filter | Content of chromium (VI) compounds – expressed as Cr (VI) Range (0,0005 - 0,06) mg in the sample |
Spectrophotometric method | NIOSH 7600:2015 | |
| 194 | General environment - waste gas samples collected on sorbent tubes | Formaldehyde content Range (0,00030 - 0,020) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Test procedure PB 006A issue 2 of 02.05.2013 | |
| 195 | General environment - waste gas samples collected on sorbent tubes | Benzene content Range (0,002 - 0,4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 196 | General environment - waste gas samples collected on sorbent tubes | Content: cyclohexanone, styrene Range (0,05 - 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 197 | General environment - waste gas samples collected on sorbent tubes | Content: butan-1-ol hexane xylene – mixture of isomers: 1,2-; 1,3-; 1,4-; cumene 4-methylpentan-2-one toluene trimethylbenzene (trimethylbenzene) – mixture of isomers 1,2,3-; 1,2,4- and 1,3,5- Range (0,1 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 198 | General environment - waste gas samples collected on sorbent tubes | 2-methylpropan-1-ol (isobutanol) content Range (0,10 – 5,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023-02 | NIOSH 1401:1994 | |
| 199 | General environment - waste gas samples collected on sorbent tubes | 2-butoxyethanol content Range (0,1 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 200 | General environment - waste gas samples collected on sorbent tubes | Content: butan-2-ol ethylbenzene 1-methoxypropan-2-ol 2-butoxyethyl acetate 2-methoxy-1-methylethyl acetate propyl acetate Range (0,2 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 201 | General environment - waste gas samples collected on sorbent tubes | Content: butan-2-one n-butyl acetate ethyl acetate propan-1-ol propan-2-ol Range (0,2 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 202 | General environment - waste gas samples collected on sorbent tubes | Content: acetone extraction naphtha acyclic isomers of hexane saturated, except hexane 2,2- dimethylbutane, 2,3-dimethylbutane, 3-methylpentane, 2-methylpentane isopropyl acetate Range (0,2 - 20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 203 | General environment - waste gas samples collected into absorbing solution | Content of hydrogen cyanide and cyanides – calculated as CN (hydrogen cyanide, sodium cyanide, potassium cyanide, calcium cyanide) Range (0,0005 - 0,05) mg in the sample |
Potentiometric method | Test procedure PB 094A issue 3 of 02.05.2013 | |
| 204 | General environment - waste gas samples collected into absorbing solution | Hydrogen fluoride and fluoride content calculated as F- Range (0,001 - 0,1) mg in the sample |
Potentiometric method | Test procedure PB 192 issue 5 of 02.05.2013 | |
| 205 | General environment - waste gas samples collected into absorbing solution | Ammonia content Range (0,0002 – 0,08) mg in the sample |
Spectrophotometric method | Test procedure PB 019 issue 4 of 02.05.2013 | PN-EN ISO 21877:2020-03 | |
| 206 | General environment - waste gas samples collected into absorbing solution | Chlorine content Range (0,001 - 0,05) mg in the sample |
Spectrophotometric method | Test procedure PB 062 issue 3 of 02.05.2013 | |
| 207 | General environment - waste gas samples collected into absorbing solution | Hydrogen chloride content Range (0,01 - 0,2) mg in the sample |
Spectrophotometric method | PN-EN 1911:2011 | |
| 208 | General environment - waste gas samples collected into absorbing solution | Sulphuric (VI) acid and sulphur trioxide content Range (0,025 - 0,55) mg in the sample |
Spectrophotometric method | Test procedure PB 270 issue 2 of 02.05.2013 | |
| 209 | General environment - waste gas samples collected into absorbing solution | Ozone content Range (0,0002 – 0,005) mg in the sample |
Spectrophotometric method | Test procedure PB 341 issue 5 of 02.05.2013 | |
| 210 | General environment - waste gas samples collected into absorbing solution | Potassium hydroxide content Range (0,0007 - 0,014) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 211 | General environment - waste gas samples collected into absorbing solution | Sodium hydroxide content Range (0,0009 - 0,018) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Test procedure PB 435 issue 2 of 02.05.2013 | |
| 212 | General environment - waste gas samples collected into absorbing solution | Hydrogen sulphide content Range (0,005 – 0,05) mg in the sample |
Spectrophotometric method | Test procedure PB 370 issue 5 of 02.05.2013 | |
| 213 | General environment - waste gas samples collected into absorbing solution | Formaldehyde content Range (0,00050 – 0,020) mg in the sample |
Spectrophotometric method | CEN/TS 17638:2021 test procedure PB 197 issue 2 of 21.11.2022 | |
| 214 | General environment - waste gas samples collected into absorbing solution | Mercury content Range (0,000025 - 0,06) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 | |
| 215 | General environment - waste gas samples collected into absorbing solution - waste gas samples collected on sorbent tubes | Methanol content Range (0,080 – 6,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Test procedure PB 272 issue 2 of 02.05.2013 | PN-EN 13649:2005 | PN-Z-04476:2016-10 | |
Reference standards (106)
CEN/TS 17638:2021 test procedure PB 197 issue 2 of 21.11.2022
NIOSH 1401:1994
NIOSH 7600:2015
PN ISO 10396:2001
PN-71/Z-04041
PN-75/Z-04037.03
PN-77/Z-04110/01
PN-78/Z-04112/01
PN-78/Z-04113/02
PN-81/Z-04028.01
PN-81/Z-04134.03
PN-83/Z-04118/02
PN-85/Z-04140/02
PN-86/Z-04113/05
PN-87/Z-04005.05
PN-87/Z-04100/03
PN-87/Z-04178/02
PN-88/Z-04005.06
PN-88/Z-04196.02
PN-89/Z-04023-02
PN-89/Z-04159/10
PN-89/Z-04208/04
PN-89/Z-04208/05
PN-92/Z-04113/09
PN-92/Z-04227.02
PN-EN 12619:2013-05
PN-EN 13211+AC:2006
PN-EN 13284-1:2018-02 CEN/TR 17078:2017
PN-EN 13649:2005
PN-EN 14253+A1:2011
PN-EN 14790:2017-04
PN-EN 1838:2025-05 Method A
PN-EN 1911:2011
PN-EN ISO 11079:2008
PN-EN ISO 21877:2020-03
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004 / A1:2015
PN-EN ISO 7243:2018 -01
PN-EN ISO 7730:2006
PN-EN ISO 7730:2006/Ap2:2016-04
PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11
PN-N-01307:1994
PN-Z-04008-4:1999
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04015-12:1996
PN-Z-04015-13:1996
PN-Z-04030-7:1994
PN-Z-04073-1:2014-08
PN-Z-04102-3:2013-10
PN-Z-04106-3:2002
PN-Z-04108-5:2006
PN-Z-04108-6:2006+Az1:2009
PN-Z-04216-2:2012 Principles and Methods of Assessing the Working Environment 1998, No. 19 pp. 165 – 169
PN-Z-04252-1:2012 test procedure PB 052 issue 2 of 02.05.2013
PN-Z-04252-2:2012 test procedure PB 052 issue 2 of 02.05.2013
PN-Z-04300:2002
PN-Z-04318:2005
PN-Z-04323:2004
PN-Z-04332:2006 test procedure PB 366 issue 6 of 02.05.2022
PN-Z-04422:2010
PN-Z-04423:2011
PN-Z-04429:2011
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04442:2023-05
PN-Z-04469:2015-10
PN-Z-04472:2015-10+Ap1:2015-12
PN-Z-04476:2016-10
PN-Z-04486:2017-10
PN-Z-04487:2017-10
PN-Z-04488:2017-10
PN-Z-04490:2017-10
PN-Z-04502:2019-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05+Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05+Ap1:2022-08
Principles and Methods of Assessing the Working Environment 1997, No. 17 pp. 55 – 59
Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130
Test procedure PB 006 issue 4 of 02.05.2013
Test procedure PB 006A issue 2 of 02.05.2013
Test procedure PB 007 issue 3 of 02.05.2013
Test procedure PB 019 issue 4 of 02.05.2013
Test procedure PB 025 issue 3 of 02.05.2013
Test procedure PB 062 issue 3 of 02.05.2013
Test procedure PB 089 issue 2 of 02.05.2013
Test procedure PB 092 issue 2 of 02.05.2013
Test procedure PB 093 issue 2 of 23.11.2021
Test procedure PB 094A issue 3 of 02.05.2013
Test procedure PB 095 issue 2 of 02.05.2013
Test procedure PB 12464 issue 3 of 02.05.2016
Test procedure PB 136A issue 2 of 02.05.2013
Test procedure PB 148A issue 1 of 02.05.2024
Test procedure PB 192 issue 5 of 02.05.2013
Test procedure PB 196 issue 4 of 02.05.2013
Test procedure PB 270 issue 2 of 02.05.2013
Test procedure PB 272 issue 2 of 02.05.2013
Test procedure PB 299 issue 5 of 02.05.2023
Test procedure PB 341 issue 5 of 02.05.2013
Test procedure PB 370 issue 5 of 02.05.2013
Test procedure PB 398 issue 2 of 02.05.2013
Test procedure PB 425 issue 4 of 02.05.2013
Test procedure PB 435 issue 2 of 02.05.2013
Test procedure PB 90 issue 1 of 02.05.2021