🇵🇱 TES LABORATORIUM Spółka z o.o. PL
EnvironmentWater & wastewaterMaterials & polymers
TES LABORATORIUM Spółka z o.o. is a laboratory accredited by PCA under number AB 849 (Warszawa, Poland). Its accreditation scope covers 158 test methods in the following areas: Environment, Water & wastewater, Materials & polymers. Test objects include: Workplace environment - air - air samples collected on filters, Wastewater, Workplace environment - air - air samples collected on sorbent tubes, Workplace environment – non-laser optical radiation. Most frequently used techniques: Flame atomic absorption spectrometry (FAAS), Gas chromatography with flame ionization detection (GC-FID), Spectrophotometric method.
At a glance
- Accreditation number: PCA AB 849
- Methods in scope: 158
- Types of test objects: 19
- Techniques used: 23
- City: Warszawa, Poland
- Accreditation number
- AB 849
- Accreditation body
- PCA
- Address
- Al. Krakowska 110/114, 00-971 Warszawa
- City
- Warszawa, Poland
What this laboratory tests (19)
- Workplace environment - air - air samples collected on filters — 44 methods
- Wastewater — 32 methods
- Workplace environment - air - air samples collected on sorbent tubes — 21 methods
- Workplace environment – non-laser optical radiation — 12 methods
- Workplace environment - air — 11 methods
- Workplace environment - air - air samples collected into absorbing solution — 8 methods
- Workplace environment - air - air samples collected on tubes — 6 methods
- Workplace environment - air - air samples collected on a filter — 3 methods
- General environment - noise from installations, equipment and industrial plants — 2 methods
- Workplace environment - cold microclimate — 2 methods
- Workplace environment - hand-arm vibration — 2 methods
- Workplace environment - hot microclimate — 2 methods
- Workplace environment - indoor electric lighting — 2 methods
- Workplace environment - moderate microclimate — 2 methods
- Workplace environment - noise — 2 methods
- and 4 more
Analytical techniques used (23)
- Flame atomic absorption spectrometry (FAAS) — 28 methods
- Gas chromatography with flame ionization detection (GC-FID) — 23 methods
- Spectrophotometric method — 23 methods
- High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) — 13 methods
- Direct measurement method — 12 methods
- Ion chromatography with conductometric detection (IC) — 9 methods
- Gravimetric method — 6 methods
- Electrothermal atomization atomic absorption spectrometry (ETAAS) — 4 methods
- Electrochemical method — 3 methods
- Fourier transform infrared absorption spectrophotometry (FT-IR) — 2 methods
- Personal dosimetry method — 2 methods
- Potentiometric method — 2 methods
- Conductometric method — 1 method
- Direct measurement method (method A) — 1 method
- Direct measurement method (method M) — 1 method
- and 8 more
Certificate information
- Issue date
- 26.01.2026
- Issue no.
- 21
Accreditation scope — test methods (158)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | Workplace environment - air | Sampling for the assessment of occupational exposure to: dust agents – inhalable fraction – respirable fraction |
Personal dosimetry method | PN-Z-04008-7:2002 + Az1:2004 | |
| 2 | Workplace environment - air | Sampling for the assessment of occupational exposure to: organic substances, including: – inhalable fraction inorganic substances, including: – inhalable fraction – respirable fraction – thoracic fraction metals and their compounds, including: – inhalable fraction – respirable fraction |
Personal dosimetry method | PN-Z-04008-7:2002 + Az1:2004 | |
| 3 | Workplace environment - air | Sampling for the assessment of occupational exposure to: inorganic substances |
Stationary method | PN-Z-04008-7:2002 + Az1:2004 | |
| 4 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002 + Az1:2004 | ||
| 5 | Workplace environment - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (30 – 137) dB, C-weighted peak sound pressure level Range (42 – 140) dB, |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and cl. 11 | |
| 6 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and cl. 11 | ||
| 7 | General environment - noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level Range (25 – 115) dB |
Direct measurement method | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F | |
| 8 | General environment - noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated) | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F | ||
| 9 | Workplace environment – ultrasonic noise | Equivalent sound pressure levels in one-third octave bands with centre frequencies from 10 kHz to 40 kHz Maximum sound pressure levels in one-third octave bands with centre frequencies from 10 kHz to 40 kHz Range (40 - 137) dB |
Direct measurement method | PN-Z-01339:2020-12 | |
| 10 | Workplace environment – ultrasonic noise | Equivalent sound pressure levels in third-octave bands with centre frequencies from 10 kHz to 40 kHz referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-Z-01339:2020-12 | ||
| 11 | Workplace environment - hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,178÷100) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | |
| 12 | Workplace environment - hand-arm vibration | Daily exposure, expressed as the energy-equivalent value for an 8-hour working day of the vector sum of the frequency-corrected r.m.s. vibration accelerations, determined for the three components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes or less, expressed as the vector sum of the frequency-weighted r.m.s. vibration accelerations, determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | ||
| 13 | Workplace environment - whole-body vibration | Weighted r.m.s. values of vibration acceleration Range (0,0178÷100) m/s2 |
Direct measurement method | PN-EN 14253 + A1:2011 | |
| 14 | Workplace environment - whole-body vibration | Daily exposure, expressed as the 8-hour energy-equivalent frequency-weighted RMS vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate coefficients (1.4awx, 1.4awy, awz), Exposure lasting 30 minutes and less, expressed as the frequency-weighted RMS vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate coefficients (1,4awx, 1,4awy, awz) (calculated) | PN-EN 14253 + A1:2011 | ||
| 15 | Workplace environment -energy expenditure | Air temperature Range (0 – 40) oC Air flow Range (10,1 – 58,4) dm3/min |
Direct measurement method | PB-12 edition 4 of 29.09.2023 | |
| 16 | Workplace environment -energy expenditure | Energy expenditure (calculated) | PB-12 edition 4 of 29.09.2023 | ||
| 17 | Workplace environment - indoor electric lighting | Illuminance Range (0,5 – 10 000) lx |
Direct measurement method | PN-83/E-04040.03 | |
| 18 | Workplace environment - indoor electric lighting | Illuminance uniformity (calculated) | PN-83/E-04040.03 | ||
| 19 | Workplace environment - moderate microclimate | Air temperature Range (0 – 30) oC Black globe temperature Range (0 – 40) oC Air humidity Range (20 – 80) % Air velocity Range (0,15 – 5,0) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | |
| 20 | Workplace environment - moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | ||
| 21 | Workplace environment - hot microclimate | Air temperature Range (10 – 40) oC Natural wet bulb temperature Range (10 – 40) oC Black globe temperature Range (10 – 40) oC |
Direct measurement method | PN-EN ISO 7243:2018-01 | |
| 22 | Workplace environment - hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018-01 | ||
| 23 | Workplace environment - cold microclimate | Air temperature Range (- 25 – 10) oC Black globe temperature Range (- 25 – 10) oC Air humidity Range (20 – 90) % Air velocity Range (0,15 – 5,0) m/s |
Direct measurement method | PN-EN ISO 11079: 2008 | |
| 24 | Workplace environment - cold microclimate | IREQmin index, IREQneutral index, twc index (calculated) | PN-EN ISO 11079: 2008 | ||
| 25 | Workplace environment – non-laser optical radiation | Effective irradiance for UV in the spectral range (180 – 400) nm Range (10-6 – 39,9) W/m2 |
Direct measurement method (method A) | PN-EN 14255-1:2010 | PN-T-06589:2002 | |
| 26 | Workplace environment – non-laser optical radiation | Effective irradiation for UV in the spectral range (180 – 400) nm (calculated) | PN-EN 14255-1:2010 | PN-T-06589:2002 | ||
| 27 | Workplace environment – non-laser optical radiation | Irradiance for UVA in the spectral range (315 – 400) nm Range (10-3 – 3990) W/m2 |
Direct measurement method (method M) | PN-EN 14255-1:2010 | PN-T-06589:2002 | |
| 28 | Workplace environment – non-laser optical radiation | Radiant exposure for UVA in the spectral range (315 – 400) nm (calculated) | PN-EN 14255-1:2010 | PN-T-06589:2002 | ||
| 29 | Workplace environment – non-laser optical radiation | Effective irradiance for VIS in the spectral range (300 – 700) nm Range (10-6 – 399) W/m2 |
Direct measurement method (method O) | PN-EN 14255-2:2010 | |
| 30 | Workplace environment – non-laser optical radiation | Effective radiance for VIS in the spectral range (300 – 700) nm (calculated) | PN-EN 14255-2:2010 | ||
| 31 | Workplace environment – non-laser optical radiation | Irradiance of VIS, IRA, IRB in the spectral range (380 – 3000) nm Range (30 – 3999) W/m2 |
Direct measurement method (method X) | PN-EN 14255-2:2010 | |
| 32 | Workplace environment – non-laser optical radiation | Radiant exposure for VIS, IRA, IRB in the spectral range (380 – 3000) nm (calculated) | PN-EN 14255-2:2010 | ||
| 33 | Workplace environment – non-laser optical radiation | Effective irradiance for VIS, IRA in the spectral range (380 – 1400) nm Range (10-6 – 3990) W/m2 |
Direct measurement method | PN-T-05687:2002 cl. 2.5.4. | |
| 34 | Workplace environment – non-laser optical radiation | Effective radiance for VIS, IRA in the spectral range (380 – 1400) nm (calculated) | PN-T-05687:2002 cl. 2.5.4. | ||
| 35 | Workplace environment – non-laser optical radiation | Effective irradiance for IRA in the spectral range (780 – 1400) nm Range (10-3 – 3990) W/m2 |
Direct measurement method | PN-T-05687:2002 cl. 2.5.4. | |
| 36 | Workplace environment – non-laser optical radiation | Effective radiance for IRA in the spectral range (780 – 1400) nm (calculated) | PN-T-05687:2002 cl. 2.5.4. | ||
| 37 | Workplace environment - air | Concentration of harmful dust agents – inhalable fraction apatites and phosphorites portland cement titanium dioxide natural graphite synthetic graphite kaolin amorphous and synthetic silica wood dusts flour dusts dusts not classified according to toxicity organic dusts of animal and plant origin, excluding wood and flour dusts carbon black calcium sulfate (VI) (gypsum) talc coal (hard, brown) calcium magnesium carbonate (dolomite) silicon carbide, non-fibrous Range (0,056-20,00) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/Ap1:2022-08 | |
| 38 | Workplace environment - air | Concentration of harmful dust agents – respirable fraction apatites and phosphorites portland cement natural graphite amorphous and synthetic silica organic dusts of animal and plant origin, excluding wood and flour dusts diesel engine exhaust talc coal (hard, brown) Range (0,063-6,20) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/Ap1:2022-08 | |
| 39 | Workplace environment - air | Concentration / content of crystalline silica – quartz, cristobalite – respirable fraction – direct-on-filter determination technique Range (0,008 – 0,5) mg/m3 Range (0,006 – 0,4) mg in the sample |
Fourier transform infrared absorption spectrophotometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2014, No. 3 (81), pp. 103–139 | |
| 40 | Workplace environment - air | Concentration / content of crystalline silica – quartz, cristobalite – respirable fraction Range (0,008 – 0,5) mg/m3 Range (0,006 – 0,4) mg in the sample |
Fourier transform infrared absorption spectrophotometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130 | |
| 41 | Workplace environment - air | Carbon monoxide concentration Range (2,3 – 233) mg/m3 Range (2,0 – 200) ppm |
Electrochemical method | PB-39 edition 5 of 30.09.2024 | |
| 42 | Workplace environment - air | Carbon dioxide concentration Range (915 – 36582) mg/m3 |
Electrochemical method | PB-39 edition 5 of 30.09.2024 | |
| 43 | Workplace environment - air | Exposure indices (calculated) | PB-39 edition 5 of 30.09.2024 | ||
| 44 | Workplace environment - air - air samples collected into absorbing solution | Ammonia concentration/content Range (1,1 – 200) mg/m3 Range (0,011 – 2,0) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 45 | Workplace environment - air - air samples collected into absorbing solution | Formic acid concentration/content Range (0,15 – 30) mg/m3 Range (0,003 – 0,8) mg in the sample |
Spectrophotometric method | PN-88/Z-04196/02 | |
| 46 | Workplace environment - air - air samples collected into absorbing solution | Chlorine concentration/content Range (0,07 – 5,8) mg/m3 Range (0,00052 – 0,005) mg in the sample |
Spectrophotometric method | PN-75/Z-04037/03 | |
| 47 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen dioxide concentration/content Range (0,07 – 3,6) mg/m3 Range (0,037 – 1,88) ppm Range (0,0007 – 0,036) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 48 | Workplace environment - air - air samples collected into absorbing solution | Nitrogen monoxide concentration/content Range (0,25 – 11,2) mg/m3 Range (0,20 – 8,97) ppm Range (0,0025 – 0,112) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 49 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen sulphide concentration/content Range (0,6 – 28,0) mg/m3 Range (0,01 – 0,42) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 50 | Workplace environment - air - air samples collected on filters | Concentration/content of highly refined mineral oil excluding metalworking fluids – inhalable fraction (liquid phase of aerosol) Range (0,5 – 10) mg/m3 Range (0,3 – 6) mg in the sample |
Ultraviolet absorption spectrometry method (UV) | PN-Z-04108-6:2006 + Az1:2009 | |
| 51 | Workplace environment - air - air samples collected on filters | Concentration/content of chromium (VI) compounds – calculated as Cr (VI) Range (0,0004 – 0,05) mg/m3 Range (0,0003 – 0,036) mg in the sample |
Spectrophotometric method | PN-87/Z-04126/02 | |
| 52 | Workplace environment - air - air samples collected on filters | Hydrogen chloride concentration/content Range (0,33 – 66,7) mg/m3 Range (0,20 – 4,0) mg in the sample |
Turbidimetric method | PN-Z-04450:2014-08 | |
| 53 | Workplace environment - air - air samples collected into absorbing solution | Hydrogen peroxide concentration/content Range (0,04 – 2,67) mg/m3 Range (0,4 – 8) μg in the sample |
Spectrophotometric method | PN-Z-04548:2023-03 | |
| 54 | Workplace environment - air - air samples collected on filters | Concentration/content of ammonium chloride – vapours and inhalable fraction Range (0,13 – 60) mg/m3 Range (0,1 – 15) mg in the sample |
Spectrophotometric method | PN-Z-04265:2000 | |
| 55 | Workplace environment - air - air samples collected on filters | Concentration/content of manganese and its inorganic compounds – calculated as Mn – inhalable fraction – respirable fraction Range (0,003 – 1,7) mg/m3 Range (0,002 – 3,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10+Ap1:2015-12 | |
| 56 | Workplace environment - air - air samples collected on filters | Concentration/content of iron oxides calculated as Fe Iron(III) oxide, Iron(II) oxide, Triiron tetraoxide – inhalable fraction – respirable fraction Range (0,011 – 21) mg/m3 Range (0,008 – 15) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2025-02 | |
| 57 | Workplace environment - air - air samples collected on filters | Concentration/content of nickel compounds – calculated as Ni – inhalable fraction – respirable fraction Range (0,0006 – 0,69) mg/m3 Range (0,0005 – 0,50) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Principles and Methods of Assessing the Working Environment 2021, No. 4 (110), pp. 179–189 excluding cl. 7 | |
| 58 | Workplace environment - air - air samples collected on filters | Metallic nickel concentration/content Range (0,0006 – 0,69) mg/m3 Range (0,0005 – 0,50) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019 | |
| 59 | Workplace environment - air - air samples collected on filters | Concentration / content of metallic chromium, chromium compounds: chromium (II), chromium (III), chromium (VI) – calculated as Cr Range (0,003 – 2,8) mg/m3 Range (0,002 – 2,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04434:2011 | |
| 60 | Workplace environment - air - air samples collected on filters | Concentration/content of chromium (II) compounds – calculated as Cr(II), chromium (III) compounds calculated as CR (III) (calculated) | PB-40, edition 2 of 29.09.2023 | ||
| 61 | Workplace environment - air - air samples collected on filters | Concentration/content of zinc oxide – calculated as Zn – inhalable fraction Range (0,035 – 20,0) mg/m3 Range (0,025 – 5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-87-Z-04100/03 | |
| 62 | Workplace environment - air - air samples collected on filters | Concentration/content of zinc dichloride – inhalable fraction Range (0,036 – 4,0) mg/m3 Range (0,026 – 2,5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04367:2020-11 | |
| 63 | Workplace environment - air - air samples collected on filters | Concentration/content of cadmium and its inorganic compounds - calculated as Cd – inhalable fraction Range (0,000097 – 0,0138) mg/m3 Range (0,00007– 0,01) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04102-3:2013-10 | |
| 64 | Workplace environment - air - air samples collected on filters | Concentration/content of tin and its inorganic compounds except stannane – calculated as Sn inhalable fraction Range (0,07 – 4,2) mg/m3 Range (0,05 – 3,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04488:2017-10 | |
| 65 | Workplace environment - air - air samples collected on filters | Concentration/content of lead and its inorganic compounds– calculated as Pb inhalable fraction Range (0,003 – 0,14) mg/m3 Range (0,002 – 0,1) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04487:2017-10 | |
| 66 | Workplace environment - air - air samples collected on filters | Concentration/content of copper and its inorganic compounds – calculated as Cu Range (0,003 – 6,9) mg/m3 Range (0,002 – 5,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04106-3:2002 | |
| 67 | Workplace environment - air - air samples collected on filters | Silver concentration/content – inhalable fraction Range (0,003 – 0,13) mg/m3 Range (0,002 – 0,1) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04216-2:2012 | |
| 68 | Workplace environment - air - air samples collected on filters | Concentration/content of metallic aluminium, aluminium powder (unstabilised), aluminium oxide – calculated as Al., aluminium hydroxide – calculated as Al – inhalable fraction, – respirable fraction Range (0,014 – 6,9) mg/m3 Range (0,01 – 5,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04263-1:2012 | |
| 69 | Workplace environment - air - air samples collected on filters | Sodium hydroxide concentration/content Range (0,0024 – 2,1) mg/m3 Range (0,0017 – 1,5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 70 | Workplace environment - air - air samples collected on filters | Potassium hydroxide concentration/content Range (0,002 – 2,1) mg/m3 Range (0,0014 – 1,5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 71 | Workplace environment - air - air samples collected on filters | Concentration/content of lithium hydride – inhalable fraction Range (0,0008 – 0,056) mg/m3 Range (0,6 – 42) μg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04496:2018-09 | |
| 72 | Workplace environment - air - air samples collected on filters | Concentration/content of titanium and its compounds – calculated as Ti Range (0,14 – 60) mg/m3 Range (0,1– 24,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04489:2017-10 | |
| 73 | Workplace environment - air - air samples collected on filters | Concentration/content of selenium and its compounds, except selane – calculated as Se Range (0,002 – 0,70) mg/m3 Range (0,001 – 0,5) mg in the sample |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-Z-04468:2015-10 | |
| 74 | Workplace environment - air - air samples collected on filters | Concentration/content of arsenic and its inorganic compounds – calculated as As inhalable fraction Range (0,14 – 20) μg/m3 Range (0,10 – 14,4) μg in the sample |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-Z-04527:2021-07 | |
| 75 | Workplace environment - air - air samples collected on filters | Calcium oxide concentration/content inhalable fraction respirable fraction Range (0,02 – 12,0) mg/m3 Range (0,014 – 5,8) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04442:2023-05 | |
| 76 | Workplace environment - air - air samples collected on filters | Concentration/content of calcium hydroxide inhalable fraction respirable fraction Range (0,012 – 12) mg/m3 Range (0,009 – 9) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04497:2018-09 | |
| 77 | Workplace environment - air - air samples collected on filters | Calcium carbonate concentration/content – inhalable fraction Range (0,036 – 20) mg/m3 Range (0,026 – 14,4) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04294:2001 | |
| 78 | Workplace environment - air - air samples collected on filters | Concentration/content of cobalt and its inorganic compounds – calculated as Co Range (0,0006 – 0,056) mg/m3 Range (0,0004 – 0,04) mg in the sample |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-Z-04454:2014 | |
| 79 | Workplace environment - air - air samples collected on filters | Concentration/content of beryllium and its inorganic compounds – calculated as Be – inhalable fraction Range (0,000014 – 0,00046) mg/m3 Range (0,01 – 0,33) μg in the sample |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-Z-04013-3:2012 | |
| 80 | Workplace environment - air - air samples collected on filters | Iron concentration/content Range (0,015 – 21) mg/m3 Range (0,01 – 16) mg in the sample Concentration/content of vanadium Range (0,014 – 21) mg/m3 Range (0,01 – 15) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04549:2023-05 | |
| 81 | Workplace environment - air - air samples collected on filters | Concentration/content of ferrovanadium – inhalable fraction (calculated) | PN-Z-04549:2023-05 | ||
| 82 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of organic compounds: trimethylbenzene – mixture of isomers Range (1,2,3-, 1,2,4- and 1,3,5-) Range (0,333 – 1440) mg/m3 Range (0,008 – 7,2) mg in the sample 1-chloro-2,3-epoxypropane (Epichlorohydrin) (0,083 – 160) mg/m3 (0,002 – 0,800) mg in the sample 1-methoxypropan-2-ol (0,375 – 1440) mg/m3 (0,009 – 7,2) mg in sample 2-butoxyethanol (1,00 – 2160) mg/m3 (0,018 – 10,8) mg in the sample 2-methyl-1-propanol (isobutanol) (2,33 – 960) mg/m3 (0,042 – 4,8) mg in the sample acetone (0,571 – 4320) mg/m3 (0,016 – 21,6) mg in sample acetonitrile (1,08 – 1440) mg/m3 (0,026 – 7,2) mg in the sample butyl acrylate (0,333 – 720) mg/m3 (0,008 – 3,60) mg in the sample benzene (0,125 – 21,6) mg/m3 (0,003 – 0,108) mg in the sample buta-1,3-diene (0,208 – 82,8) mg/m3 (0,005 – 0,414) mg in the sample butan-1-ol (0,889 – 1440) mg/m3 (0,016 – 7,20) mg in the sample butan-2-one (0,889 – 4680) mg/m3 (0,016 – 23,4) mg in the sample chlorobenzene (1,11 – 720) mg/m3 (0,020 – 3,6) mg in the sample chloroethene (0,200 – 5,2) mg/m3 (0,001 – 0,026) mg in the sample chloroform (0,571 – 88,1) mg/m3 (0,016 – 2,47) mg in the sample cyclohexane (0,571 – 5040) mg/m3 (0,016 – 25,2) mg in the sample cyclohexanol (0,333 – 7600) mg/m3 (0,006 – 38,0) mg in the sample cyclohexanone (1,00 – 1440) mg/m3 (0,018 – 7,2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-29 edition 7 of 29.09.2023 | |
| 83 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of organic compounds: dichloromethane Range (2,78 – 2480) mg/m3 Range (0,020 – 12,4) mg in the sample ethanol (2,00 – 7560) mg/m3 (0,024 – 37,8) mg in the sample ethylbenzene (0,375 – 1440) mg/m3 (0,009 – 7,2) mg in sample ethyltoluene – mixture of isomers (2-, 3-, 4-) (0,375 – 1140) mg/m3 (0,009 – 5,7) mg in the sample phenol (0,417 – 288) mg/m3 (0,01 – 1,44) mg in the sample ethylene glycol (0,417 – 1480) mg/m3 (0,01 – 7,4) mg in the sample hexane (0,417 – 720) mg/m3 (0,01 – 3,6) mg in the sample heptane (2 – 5440) mg/m3 (0,048 – 27,2) mg in the sample cumene (0,321 – 1080) mg/m3 (0,009 – 5,40) mg in the sample methyl methacrylate (0,750 – 2160) mg/m3 (0,018 – 10,8) mg in the sample xylene – mixture of isomers (1,2-, 1,3-, 1,4-) (0,643 – 2160) mg/m3 (0,018 – 10,8) mg in the sample 2-butoxyethyl acetate (0,417 – 1256) mg/m3 (0,01 – 6,28) mg in the sample n-butyl acetate (1,00 – 2040) mg/m3 (0,018 – 10,2) mg in the sample ethyl acetate (1,00 – 4540) mg/m3 (0,018 – 22,7) mg in the sample isobutyl acetate (1,11 – 2440) mg/m3 (0,020 – 12,2) mg in the sample isopentyl acetate (0,417 – 1800) mg/m3 (0,01 – 9,0) mg in the sample isopropyl acetate (1,11 – 4320) mg/m3 (0,02 – 21,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-29 edition 7 of 29.09.2023 | |
| 84 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of organic compounds: 2-methoxy-1-methylethyl acetate Range (0,417 – 2580) mg/m3 Range (0,01 – 12,9) mg in the sample methyl acetate (1,00 – 1956) mg/m3 (0,018 – 9,78) mg in the sample pentyl (n-amyl) acetate (1,11 – 5760) mg/m3 (0,02 – 28,8) mg in the sample vinyl acetate (0,643 – 2480) mg/m3 (0,018 – 12,4) mg in the sample pentane (1,67 – 14880) mg/m3 (0,02 – 74,4) mg in the sample propan-1-ol (propyl alcohol) (1,11 – 3600) mg/m3 (0,02 – 18,0) mg in the sample propan-2-ol (0,571 – 4320) mg/m3 (0,016 – 21,6) mg in sample styrene (0,643 – 2160) mg/m3 (0,018 – 10,8) mg in the sample tetrachloroethene (1,33 – 2160) mg/m3 (0,032 – 10,8) mg in the sample toluene (0,643 – 2880) mg/m3 (0,018 – 14,4) mg in the sample trichloroethene (0,625 – 1940) mg/m3 (0,015 – 9,7) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-29 edition 7 of 29.09.2023 | |
| 85 | Workplace environment - air - air samples collected on sorbent tubes | Extraction naphtha concentration/content Range (11,5 – 500,0) mg/m3 Range (0,414 – 18,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB- 30 edition 3 of 29.09.2023 | |
| 86 | Workplace environment - air - air samples collected on sorbent tubes | White spirit concentration/content Range (0,40 – 300,0) mg/m3 Range (0,008 – 10,8) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-35 edition 2 of 29.09.2023 | |
| 87 | Workplace environment - air - air samples collected on sorbent tubes | Kerosene concentration/content Range (0,35 – 150,0) mg/m3 Range (0,01 – 5,4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227.02 | |
| 88 | Workplace environment - air - air samples collected on sorbent tubes | Acetic acid concentration/content Range (1 – 40,0) mg/m3 Range (0,06 – 1,9) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z 04323:2004 | |
| 89 | Workplace environment - air - air samples collected on sorbent tubes | Propane concentration/content Range (180 – 4500) mg/m3 Range (0,54 – 13,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 | |
| 90 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of butane Range (190 – 4800) mg/m3 Range (0,57 – 14,4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 | |
| 91 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of phenylmethanol Range (0,28 – 291,7) mg/m3 Range (0,01 – 10,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | OSHA Method PV 2009 | |
| 92 | Workplace environment - air - air samples collected on sorbent tubes | Methanol concentration/content Range (3,4 – 400) mg/m3 Range (0,061 – 2,000) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04476:2016-10 | |
| 93 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of epoxyethane (ethylene oxide) Range (0,06 – 2,04) mg/m3 Range (1,5 – 49,0) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04300:2002 | |
| 94 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 4-hydroxy-4methylpentan-2-one Range (2,8 – 278,0) mg/m3 Range (0,056 – 5,500) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04368:2008 | |
| 95 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of ethyl 2-cyanoacrylate Range (0,07 – 2,58) mg/m3 Range (1,3 – 46,6) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04467:2016-10 | |
| 96 | Workplace environment - air - air samples collected into absorbing solution | Concentration/content of acrylamide Range (0,007 – 0,140) mg/m3 Range (0,84 – 16,80) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04486:2017-10 | |
| 97 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of acrylaldehyde (acrolein) Range (0,009 – 0,250) mg/m3 Range (0,27 – 7,50) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z 04045-16:2010 | |
| 98 | Workplace environment - air - air samples collected on sorbent tubes | Formaldehyde concentration/content Range (0,007 – 2,00) mg/m3 Range (0,0001– 0,030) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100 | NIOSH Method 216, issue 3 of 25.02.2016 | |
| 99 | Workplace environment - air - air samples collected on filters | Concentration/content of hexane-1,6-diyl diisocyanate (HDI) Range (0,004 – 0,063) mg/m3 Range (0,96– 15,00) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PB-38 edition 3 of 29.09.2023 OSHA 42:1989 | |
| 100 | Workplace environment - air - air samples collected on filters | Concentration/content of methylenediphenyl diisocyanate – mixture of isomers (MDI) Range (0,002 – 0,100) mg/m3 Range (0,46– 9,00) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PB-38 edition 3 of 29.09.2023 OSHA 47:1989 | |
| 101 | Workplace environment - air - air samples collected on filters | Concentration/content of toluenediyl diisocyanate – mixture of isomers 2,4- and 2,6- (2,4- TDI, 2,6- TDI) Range (0,0006 – 0,015) mg/m3 Range (0,07– 1,80) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PB-38 edition 3 of 29.09.2023 OSHA 42:1989 | |
| 102 | Workplace environment - air - air samples collected on filters | Concentration/content of phenolphthalein Range (0,33 – 16,7) mg/m3 Range (0,080 – 4,00) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04506:2019-10 Principles and Methods of Assessing the Working Environment 2018, No. 3 (97), pp. 119–129 | |
| 103 | Workplace environment - air - air samples collected on filters | Concentration/content of 2,2-bis (4-hydroxyphenyl) propane (bisphenol A) Range (0,14 – 4,2) mg/m3 Range (0,10 – 3,00) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04382:2009 Principles and Methods of Assessing the Working Environment 2017, No. 3 (93), pp. 137–153 | |
| 104 | Workplace environment - air - air samples collected on sorbent tubes | Glutaraldehyde concentration/content Range (0,04 – 6,000) mg/m3 Range (0,42– 60,00) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04290:2002 | |
| 105 | Workplace environment - air - air samples collected on sorbent tubes | Morpholine concentration/content Range (3,6 – 72,0) mg/m3 Range (21– 420) μg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | Principles and Methods of Assessing the Working Environment 2007, No. 4 (54), pp. 85–90 | |
| 106 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of hydroquinone Range (0,10 – 20,00) mg/m3 Range (0,002 – 0,040) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04479:2016-10 | |
| 107 | Workplace environment - air - air samples collected on a filter - air samples collected on tubes | Concentration/content of polycyclic aromatic hydrocarbons: anthracene Range (0,0000139 – 0,0056) mg/m3 Range (0,010 – 4,0) μg in the sample benzo(a)anthracene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample chrysene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample benzo(b)fluoranthene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample benzo(k)fluoranthene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample benzo(a)pyrene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample dibenzo(a, h)anthracene (0,0000278 – 0,0056) mg/m3 (0,020 – 4,0) μg in the sample benzo(g, h, i)perylene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample indeno (1, 2, 3-cd)pyrene (0,0000139 – 0,0056) mg/m3 (0,010 – 4,0) μg in the sample Polycyclic aromatic hydrocarbons (PAH) – as the sum of the products of the concentrations and carcinogenicity factors of 9 carcinogenic PAH (calculated) |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/Vis) | PN-Z-04240-5:2006 | |
| 108 | Workplace environment - air - air samples collected on a filter | Concentration/content of dibutyl phthalate – inhalable fraction Range (0,02 – 7,90) mg/m3 Range (0,017 – 5,700) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04495:2018-09 | |
| 109 | Workplace environment - air - air samples collected on a filter | Concentration/content of 2,2’-iminodiethanol (diethanolamine) Range (0,88 – 10,00) mg/m3 Range (0,11 – 1,26) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04395:2010 | |
| 110 | Workplace environment - air - air samples collected on a filter | Glycerol concentration/content Range (0,5 – 20) mg/m3 Range (0,1 – 4,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04374:2009 | |
| 111 | Workplace environment - air - air samples collected on tubes | Concentration/content of 3-methylbutan-1-ol (isoamyl alcohol) Range (5,0 – 1004) mg/m3 Range (0,10 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04355:2005 | |
| 112 | Workplace environment - air - air samples collected on tubes | Concentration/content of 2-(2-butoxyethoxy) ethanol Range (2,5 – 338) mg/m3 Range (0,05 – 3,4) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04399:2011 | |
| 113 | Workplace environment - air - air samples collected on tubes | Concentration/content of 4-methylpentan-2-one (MBIK) Range (1,3 – 535) mg/m3 Range (0,04 – 2,7) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04372:2009 | |
| 114 | Workplace environment - air - air samples collected on tubes | Concentration/content of naphthalene Range (1,3 – 160) mg/m3 Range (0,025 – 3,2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2002, No. 4 (34), p. 109 | |
| 115 | Workplace environment - air - air samples collected on tubes | Turpentine concentration/content Range (5,0 – 1200) mg/m3 Range (0,15 – 6,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04333:2006 | |
| 116 | Workplace environment - air - air samples collected on tubes | Concentration/content of butan-2-ol (sec-butyl alcohol) Range (12 – 1400) mg/m3 Range (0,35 – 7,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04155-4:1996 | |
| 117 | Workplace environment - air - air samples collected on filters | Concentration/content of diesel engine exhaust emissions measured as elemental carbon (EC) Range (0,0017 – 0,267) mg/m3 Range (0,42 – 67,3) μg/cm2 |
Thermal-optical method with flame ionization detection (TOA-FID) | Principles and Methods of Assessing the Working Environment 2023, No. 1 (115), pp. 5–25 | |
| 118 | Workplace environment - air - air samples collected on sorbent tubes | Nitrogen monoxide concentration/content Range (0,12 – 5,00) mg/m3 Range (0,096 – 4,01) ppm Range (0,0010 – 0,045) mg in the sample |
Ion chromatography with conductometric detection (IC) | OSHA ID-190:1991 | |
| 119 | Workplace environment - air - air samples collected on sorbent tubes | Nitrogen dioxide concentration/content Range (0,053 – 9,00) mg/m3 Range (0,028 – 4,70) ppm Range (0,00048 – 0,027) mg in the sample |
Ion chromatography with conductometric detection (IC) | OSHA ID-182:1991 | |
| 120 | Workplace environment - air - air samples collected on filters | Ozone concentration/content Range (0,0064 – 0,3) mg/m3 Range (0,00077 – 0,036) mg in the sample |
Ion chromatography with conductometric detection (IC) | OSHA ID-214:2008 | |
| 121 | Workplace environment - air - air samples collected on filters | Sulphur dioxide concentration/content Range (0,065 – 10,8) mg/m3 Range (0,024 – 4,05) ppm Range (0,0117 – 0,47) mg in the sample |
Ion chromatography with conductometric detection (IC) | OSHA ID-1011:2007 | |
| 122 | Workplace environment - air - air samples collected on filters | Concentration/content of phosphoric (V) acid Range (0,0083 – 48) mg/m3 Range (0,006 – 1,44) mg in the sample |
Ion chromatography with conductometric detection (IC) | NIOSH 7908:2014 | |
| 123 | Workplace environment - air - air samples collected on filters | Sulfuric(VI) acid concentration/content thoracic fraction Range (0,0018 – 0,34) mg/m3 Range (0,0011 – 0,204) mg in the sample |
Ion chromatography with conductometric detection (IC) | Principles and Methods of Assessing the Working Environment 2017, No. 2 (92), pp. 5–19 | |
| 124 | Workplace environment - air - air samples collected on filters | Concentration/content of fluorides calculated as F Range (0,0014 – 4) mg/m3 Range (0,0010 – 2,88) mg in the sample |
Ion chromatography with conductometric detection (IC) | NIOSH 7906:2014 Principles and Methods of Assessing the Working Environment 2014, No. 3 (81), pp. 71–87 | |
| 125 | Workplace environment - air - air samples collected on filters | Hydrogen fluoride concentration/content Range (0,0015 – 24) mg/m3 Range (0,0011 – 2,88) mg in the sample |
Ion chromatography with conductometric detection (IC) | NIOSH 7906:2014 | |
| 126 | Workplace environment - air - air samples collected on filters | Concentration/content of nitric (V) acid Range (0,0021 – 5,2) mg/m3 Range (0,00127 – 3,12) mg in the sample |
Ion chromatography with conductometric detection (IC) | NIOSH 7907:2014 | |
| 127 | Wastewater | Electrical conductivity Range (150 – 18000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 128 | Wastewater | Dissolved solids concentration Range (10 – 20 000) mg/l |
Gravimetric method | PN-78/C-04541 | |
| 129 | Wastewater | pH Range 2,0 – 10,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 130 | Wastewater | Ammonium nitrogen and ammonium ion concentration Range (0,05 – 150) mg/l N-NH4 Range (0,06 – 193) mg/l NH4 |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 131 | Wastewater | Nitrate nitrogen / nitrate concentration Range (0,50 – 150) mg/l N-NO3 Range (2,20 – 664,2) mg/l NO3 |
Spectrophotometric method | PB-37 edition 4 of 29.09.2023 | based on the NANOCOLOR test method No. 91865 | |
| 132 | Wastewater | Nitrite nitrogen/ nitrites concentration Range (0,015 – 300) mg/l N-NO2 Range (0,05 – 987 )mg/l NO2 |
Spectrophotometric method | PN-EN 26777:1999 | |
| 133 | Wastewater | Chloride concentration Range (5,0 – 1000) mg/l |
Titrimetric method | PN-ISO 9297: 1994 | |
| 134 | Wastewater | Sulfate concentration Range (2,0 – 500) mg/l |
Spectrophotometric method | PB-16 edition 4 of 29.09.2023 | based on the HACH methodology 8051 | |
| 135 | Wastewater | Iron concentration Range (0,05 – 25) mg/l |
Spectrophotometric method | PN-ISO 6332:2001+Ap1:2016-06 | |
| 136 | Wastewater | Iron concentration Range (0,01 – 20) mg/l |
Flame atomic absorption spectrometry (FAAS) | PB-18 edition 4 of 29.09.2023 | |
| 137 | Wastewater | Copper concentration Range (0,02 – 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 | |
| 138 | Wastewater | Sodium concentration Range (0,10 – 800) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-1:1994 | PN-ISO 9964-1:1994/Ak | |
| 139 | Wastewater | Potassium concentration Range (0,10 – 200) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-2:1994 | PN-ISO 9964-2:1994/Ak | |
| 140 | Wastewater | Fluoride concentration Range (0,10 – 1000) mg/l |
Potentiometric method | PN-78/C-04588.03 | |
| 141 | Wastewater | Anionic detergents Range (0,10 – 55,0) mg/l |
Spectrophotometric method | PN-EN 903:2002 | |
| 142 | Wastewater | Cyanide concentration Range (0,005 – 10,0) mg/l |
Spectrophotometric method | PN-80/C-04603/01 | |
| 143 | Wastewater | Chromium(VI) concentration Range (2,50 – 500) μg/l |
Spectrophotometric method | PN-77/ C-04604/08 | |
| 144 | Wastewater | Non-ionic detergents Range (0,20 – 30) mg/l |
Spectrophotometric method | PN-ISO 7875-2:2002 Method (A2) | |
| 145 | Wastewater | Free and total chlorine concentration Range (0,02 – 5) mg/l |
Spectrophotometric method | PN-ISO 7393-2:2011 | |
| 146 | Wastewater | Biochemical oxygen demand BOD5 Range (3 – 6000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 147 | Wastewater | Chromium concentration Range (0,02 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 1233:2000 | |
| 148 | Wastewater | Aluminium concentration Range (0,10 – 100) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN ISO 12020:2002 | |
| 149 | Wastewater | Metal concentrations in wastewater Zinc (0,20 – 100) mg/l Nickel (0,03 – 300) mg/l Lead (0,01 – 50) mg/l Cadmium (0,01 – 50) mg/l Cobalt (0,01 – 100) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 | |
| 150 | Wastewater | Total suspended solids (TSS) Range (2,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007 + Ap1:2007 | |
| 151 | Wastewater | Chemical oxygen demand - COD Range (4 – 1500) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 152 | Wastewater | Concentration of substances extractable with petroleum ether Range (0,50 – 200) mg/l |
Gravimetric method | PN-86/C-04573/01 | |
| 153 | Wastewater | Mineral oil index Range (0,10 – 50) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 154 | Wastewater | Dry residue Range (1,0 – 5000) mg/l |
Gravimetric method | PN-78/C-04541 | |
| 155 | Wastewater | Total nitrogen concentration Range (0,50 – 250,0) mg/l |
Spectrophotometric method | PB-23 edition 4 of 29.09.2023 | based on the HACH methodology 8075 | |
| 156 | Wastewater | Total phosphorus concentration Range (0,20 – 15) mg/l P |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 7+Ap1:2010+Ap2:2010 | |
| 157 | Wastewater | Phenol index Range (0,01 – 1,0) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 | |
| 158 | Wastewater | Sampling for chemical and physical testing Temperature (0,0 – 40,0)°C |
Manual method | PN-ISO 5667-10:2021-11 | PN-77/C-04584 | |
Reference standards (141)
NIOSH 7906:2014
NIOSH 7906:2014 Principles and Methods of Assessing the Working Environment 2014, No. 3 (81), pp. 71–87
NIOSH 7907:2014
NIOSH 7908:2014
NIOSH Method 216, issue 3 of 25.02.2016
OSHA ID-1011:2007
OSHA ID-182:1991
OSHA ID-190:1991
OSHA ID-214:2008
OSHA Method PV 2009
PB- 30 edition 3 of 29.09.2023
PB-12 edition 4 of 29.09.2023
PB-16 edition 4 of 29.09.2023
PB-18 edition 4 of 29.09.2023
PB-23 edition 4 of 29.09.2023
PB-29 edition 7 of 29.09.2023
PB-35 edition 2 of 29.09.2023
PB-37 edition 4 of 29.09.2023
PB-38 edition 3 of 29.09.2023 OSHA 42:1989
PB-38 edition 3 of 29.09.2023 OSHA 47:1989
PB-39 edition 5 of 30.09.2024
PB-40, edition 2 of 29.09.2023
PN-71/Z-04041
PN-75/Z-04037/03
PN-77/ C-04604/08
PN-77/C-04584
PN-78/C-04541
PN-78/C-04588.03
PN-80/C-04603/01
PN-83/E-04040.03
PN-86/C-04573/01
PN-87-Z-04100/03
PN-87/Z-04126/02
PN-88/Z-04196/02
PN-92/Z-04227.02
PN-EN 1233:2000
PN-EN 14253 + A1:2011
PN-EN 14255-1:2010
PN-EN 14255-2:2010
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 872:2007 + Ap1:2007
PN-EN 903:2002
PN-EN ISO 10523:2012
PN-EN ISO 11079: 2008
PN-EN ISO 12020:2002
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015-11
PN-EN ISO 5815-1:2019-12
PN-EN ISO 6878:2006 cl. 7+Ap1:2010+Ap2:2010
PN-EN ISO 7243:2018-01
PN-EN ISO 7730:2006
PN-EN ISO 7730:2006/Ap2:2016-04
PN-EN ISO 9377-2:2003
PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and cl. 11
PN-ISO 15705:2005
PN-ISO 5667-10:2021-11
PN-ISO 6332:2001+Ap1:2016-06
PN-ISO 6439:1994
PN-ISO 7150-1:2002
PN-ISO 7393-2:2011
PN-ISO 7875-2:2002 Method (A2)
PN-ISO 8288:2002
PN-ISO 9297: 1994
PN-ISO 9964-1:1994
PN-ISO 9964-1:1994/Ak
PN-ISO 9964-2:1994
PN-ISO 9964-2:1994/Ak
PN-N-01307:1994
PN-T-05687:2002 cl. 2.5.4.
PN-T-06589:2002
PN-Z 04045-16:2010
PN-Z 04323:2004
PN-Z-01339:2020-12
PN-Z-04008-7:2002 + Az1:2004
PN-Z-04009-11:2008
PN-Z-04013-3:2012
PN-Z-04015-13:1996
PN-Z-04102-3:2013-10
PN-Z-04106-3:2002
PN-Z-04108-6:2006 + Az1:2009
PN-Z-04155-4:1996
PN-Z-04216-2:2012
PN-Z-04240-5:2006
PN-Z-04252-1:2012
PN-Z-04252-2:2012
PN-Z-04263-1:2012
PN-Z-04265:2000
PN-Z-04290:2002
PN-Z-04294:2001
PN-Z-04300:2002
PN-Z-04333:2006
PN-Z-04355:2005
PN-Z-04367:2020-11
PN-Z-04368:2008
PN-Z-04372:2009
PN-Z-04374:2009
PN-Z-04382:2009 Principles and Methods of Assessing the Working Environment 2017, No. 3 (93), pp. 137–153
PN-Z-04395:2010
PN-Z-04399:2011
PN-Z-04434:2011
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04442:2023-05
PN-Z-04450:2014-08
PN-Z-04454:2014
PN-Z-04467:2016-10
PN-Z-04468:2015-10
PN-Z-04469:2025-02
PN-Z-04472:2015-10+Ap1:2015-12
PN-Z-04476:2016-10
PN-Z-04479:2016-10
PN-Z-04486:2017-10
PN-Z-04487:2017-10
PN-Z-04488:2017-10
PN-Z-04489:2017-10
PN-Z-04495:2018-09
PN-Z-04496:2018-09
PN-Z-04497:2018-09
PN-Z-04502:2019
PN-Z-04506:2019-10 Principles and Methods of Assessing the Working Environment 2018, No. 3 (97), pp. 119–129
PN-Z-04507:2022-05
PN-Z-04507:2022-05/Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05/Ap1:2022-08
PN-Z-04527:2021-07
PN-Z-04548:2023-03
PN-Z-04549:2023-05
Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100
Principles and Methods of Assessing the Working Environment 2002, No. 4 (34), p. 109
Principles and Methods of Assessing the Working Environment 2007, No. 4 (54), pp. 85–90
Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130
Principles and Methods of Assessing the Working Environment 2014, No. 3 (81), pp. 103–139
Principles and Methods of Assessing the Working Environment 2017, No. 2 (92), pp. 5–19
Principles and Methods of Assessing the Working Environment 2021, No. 4 (110), pp. 179–189 excluding cl. 7
Principles and Methods of Assessing the Working Environment 2023, No. 1 (115), pp. 5–25
Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F
based on the NANOCOLOR test method No. 91865
based on the HACH methodology 8051
based on the HACH methodology 8075