🇵🇱 CELSA „HUTA OSTROWIEC” Sp. z o. o. PL
Materials & polymers
CELSA „HUTA OSTROWIEC” Sp. z o. o. is a laboratory accredited by PCA under number AB 812 (Ostrowiec Świętokrzyski, Poland). Its accreditation scope covers 7 test methods in the following areas: Materials & polymers. Test objects include: Rolled steel products. Most frequently used techniques: Axial force fatigue test, Bend test / Bend test, Cyclic load test.
At a glance
- Accreditation number: PCA AB 812
- Methods in scope: 7
- Types of test objects: 1
- Techniques used: 7
- City: Ostrowiec Świętokrzyski, Poland
- Accreditation number
- AB 812
- Accreditation body
- PCA
- Address
- LABORATORIUM WYTRZYMAŁOŚCIOWE, ul. Samsonowicza 2, 27-400 Ostrowiec Świętokrzyski
- City
- Ostrowiec Świętokrzyski, Poland
What this laboratory tests (1)
- Rolled steel products — 7 methods
Analytical techniques used (7)
- Axial force fatigue test — 1 method
- Bend test / Bend test — 1 method
- Cyclic load test — 1 method
- Mass and length measurement — 1 method
- Measurement of the rib geometry — 1 method
- Rebend test — 1 method
- Tensile test at room temperature / Tensile test at room temperature — 1 method
Laboratory locations
- CELSA „HUTA OSTROWIEC” Sp. z o. o. (main site) — ul. Samsonowicza 2, 27-400 Ostrowiec Świętokrzyski
- STRENGTH TESTING LABORATORY — ul. Samsonowicza 2, 27-400 Ostrowiec Świętokrzyski
- Strength Laboratory — ul. Samsonowicza 2, 27-400 Ostrowiec Świętokrzyski
Certificate information
- Issue date
- 08.06.2026
- Issue no.
- 18
Accreditation scope — test methods (7)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Strength Laboratory | |||||
| 1 | Rolled steel products | Mechanical properties yield strength Re proof strength, plastic extension Rp tensile strength Rm percentage elongation after fracture A percentage total elongation at maximum force Agt percentage reduction of area Z force F Range: up to 1200 kN |
Tensile test at room temperature / Tensile test at room temperature | PN-EN ISO 6892-1:2020-05 Method B | PN-EN ISO 15630-1:2019-04 | ASTM A370-24a | ASTME8/E8M-25 | |
| 2 | Rolled steel products | Ability to undergo plastic deformation / Ability to undergo plastic deformation angle of bend Range: up to 180° |
Bend test / Bend test | PN-EN ISO 7438:2021-04 | PN-EN ISO 15630-1:2019-04 | |
| 3 | Rolled steel products | Ability to undergo plastic deformation / Ability to undergo plastic deformation | Rebend test | PN-EN ISO 15630-1:2019-04 | |
| 4 | Rolled steel products | Fatigue strength dynamic force Range: ±160 kN |
Axial force fatigue test | PN-EN ISO 15630-1:2019-04 | |
| 5 | Rolled steel products | Cyclic deformability force Range: up to ±600kN |
Cyclic load test | PN-H-93220:2018-02 | PN-H-93250:2018-02 | |
| 6 | Rolled steel products | Geometry of the rib surface rib width rib height rib spacing inclination angle of rib Relative rib area fR diameter Ø Range: (8 - 40) mm |
Measurement of the rib geometry | PN-EN ISO 15630-1:2019-04 | |
| 7 | Rolled steel products | Deviation from the nominal mass per metre length Range: length (0 - 1000) mm Mass Range: mass (0 - 15) kg |
Mass and length measurement | PN-EN ISO 15630-1:2019-04 | |
Reference standards (7)
ASTM A370-24a
ASTME8/E8M-25
PN-EN ISO 15630-1:2019-04
PN-EN ISO 6892-1:2020-05 Method B
PN-EN ISO 7438:2021-04
PN-H-93220:2018-02
PN-H-93250:2018-02