🇵🇱 ZEC DIAGPOM Sp z o. o. PL
EnvironmentWater & wastewater
ZEC DIAGPOM Sp z o. o. is a laboratory accredited by PCA under number AB 782 (Wrocław, Poland). Its accreditation scope covers 163 test methods in the following areas: Environment, Water & wastewater. Test objects include: Waste gases, Automated Measuring Systems (AMS), Water, Wastewater, Workplace environment − air. Most frequently used techniques: Spectrophotometric method, Gravimetric method, Direct measurement method.
At a glance
- Accreditation number: PCA AB 782
- Methods in scope: 163
- Types of test objects: 18
- Techniques used: 33
- City: Wrocław, Poland
- Accreditation number
- AB 782
- Accreditation body
- PCA
- Address
- LABORATORIUM BADAŃ ŚRODOWISKOWYCH, ul. Łowiecka 24, 50-220 Wrocław
- City
- Wrocław, Poland
What this laboratory tests (18)
- Waste gases — 77 methods
- Automated Measuring Systems (AMS) — 23 methods
- Water, Wastewater — 20 methods
- Workplace environment − air — 13 methods
- General environment – waste gas samples collected into absorbing solution — 6 methods
- General environment − noise from installations, equipment and industrial plants — 2 methods
- Groundwater — 2 methods
- Machinery and equipment – noise — 2 methods
- Surface water — 2 methods
- Waste gas dedusting equipment — 2 methods
- Wastewater, Rainwater, Snowmelt water — 2 methods
- Workplace environment - hot microclimate — 2 methods
- Workplace environment - moderate microclimate — 2 methods
- Workplace environment − lighting — 2 methods
- Workplace environment − noise — 2 methods
- and 3 more
Analytical techniques used (33)
- Spectrophotometric method — 21 methods
- Gravimetric method — 11 methods
- Direct measurement method — 7 methods
- Titrimetric method — 6 methods
- Cold vapour atomic absorption spectrometry (CVAAS) — 5 methods
- Non-dispersive infrared spectrometry (NDIR) — 5 methods
- Chemiluminescence method — 4 methods
- Thoron method — 4 methods
- Fourier transform infrared spectroscopy (FTIR) — 3 methods
- Method using an ion-selective electrode — 3 methods
- Manual method — 2 methods
- NDIR method — 2 methods
- Paramagnetic method — 2 methods
- Potentiometric method — 2 methods
- Aspiration method using absorbing solutions — 1 method
- and 18 more
Laboratory locations
- ZEC DIAGPOM Sp z o. o. (main site) — ul. Łowiecka 24, 50-220 Wrocław
- ENVIRONMENTAL TESTING LABORATORY — ul. Łowiecka 24
Certificate information
- Issue date
- 12.10.2026
- Issue no.
- 25
Accreditation scope — test methods (163)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Environmental Testing Laboratory | |||||
| 1 | Waste gases | Gas volume flow rate for dynamic pressures > 5 Pa Velocity Range (1,00 – 8,00) m/s Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Stagnation pressure method; Anemometric method | PN-Z-04030-7:1994 ← | |
| 2 | Waste gases | Sampling for determination of dust concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-Z-04030-7:1994 ← | ||
| 3 | Waste gases | Dust concentration Range (0,001 – 100) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method | PN-Z-04030-7:1994 ← | |
| 4 | Waste gases | Dust emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-Z-04030-7:1994 ← | ||
| 5 | Waste gases | Sampling for determination of the dust fraction Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-Z-04030-7:1994 ← | ||
| 6 | Waste gases | Emission of the dust fraction (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-Z-04030-7:1994 ← | ||
| 7 | Waste gases | Gas volume flow rate for dynamic pressures > 5 Pa Velocity Range (1,00 – 8,00) m/s Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law. |
Differential pressure measurement method; Anemometric method | PN-EN ISO 16911-1:2013 | CEN/TR 17078:2017-03 | |
| 8 | Waste gases | Sampling for determination of dust concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13284-1:2018-02 ← | ||
| 9 | Waste gases | Dust concentration Range (0,0002– 0,05) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method | PN-EN 13284-1:2018-02 ← | |
| 10 | Waste gases | Dust emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13284-1:2018-02 ← | ||
| 11 | Waste gases | Sampling for determination of the dust fraction Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13284-1:2018-02 ← | ||
| 12 | Waste gases | Emission of the dust fraction (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13284-1:2018-02 ← | ||
| 13 | Waste gases | Nitrogen oxides concentration NO (0,7 – 1340) mg/m3 NO2 (1,1 – 2050) mg/m3 NOx (1,1 – 2050) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Chemiluminescence method | PN-EN 14792:2017-04 ← | |
| 14 | Waste gases | NOx emission (calculated as NO2) (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14792:2017-04 ← | ||
| 15 | Waste gases | Sulphur dioxide concentration SO2 (1,5 – 8580) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Non-dispersive infrared spectrometry (NDIR) | PN-ISO 10396:2001 ← | PN-ISO 7935:2000 | |
| 16 | Waste gases | SO2 emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-ISO 10396:2001 ← | PN-ISO 7935:2000 | ||
| 17 | Waste gases | Carbon dioxide concentration Range (0,1 – 30) % Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Non-dispersive infrared spectrometry (NDIR) | ISO 12039:2019 ← | PN-ISO 10396:2001 | |
| 18 | Waste gases | CO2 emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
ISO 12039:2019 ← | PN-ISO 10396:2001 | ||
| 19 | Waste gases | Carbon monoxide concentration Range (0,8 – 6250) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Non-dispersive infrared spectrometry (NDIR) | PN-EN 15058:2017-04 ← | |
| 20 | Waste gases | CO emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 15058:2017-04 ← | ||
| 21 | Waste gases | Oxygen concentration Range (0,1 – 25) % Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Paramagnetic method | PN-EN 14789:2017-04 ← | |
| 22 | Waste gases | Sampling for the determination of sulfur dioxide concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14791:2017-04 ← | ||
| 23 | Waste gases | Concentration / content of sulphur dioxide Range (1 – 15000) mg/m3 Range (0,72 – 450) mg in the sample Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Thoron method | PN-EN 14791:2017-04 ← | |
| 24 | Waste gases | SO2 emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14791:2017-04 ← | ||
| 25 | Waste gases | Sampling for determination of hydrogen chloride concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 1911:2011 ← | ||
| 26 | Waste gases | Hydrogen chloride concentration / content Range (0,1 – 5000) mg/m3 Range (0,06 – 300) mg in the sample Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Spectrophotometric method | PN-EN 1911:2011 ← | |
| 27 | Waste gases | HCl emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 1911:2011 ← | ||
| 28 | Waste gases | Sampling for determination of hydrogen fluoride concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
ISO 15713:2006 ← | ||
| 29 | Waste gases | Concentration / content of hydrogen fluoride Range (0,1 − 200) mg/m3 Range (0,01 – 20) mg in the sample Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Method using an ion-selective electrode | ISO 15713:2006 ← | |
| 30 | Waste gases | HF emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
ISO 15713:2006 ← | ||
| 31 | Waste gases | Sampling for the determination of metal concentrations (As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14385:2025-05 ← | ||
| 32 | Waste gases | Emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14385:2025-05 ← | ||
| 33 | Waste gases | Sampling for determination of the mass concentration of PCDD/PCDF Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law. |
Filtration-condensation method | PN-EN 1948-1:2006 | |
| 34 | Waste gases | PCDD/PCDF emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law. |
PN-EN 1948-1:2006 | ||
| 35 | Waste gases | Sampling for determination of total mercury concentration Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13211+AC:2006 ← | ||
| 36 | Waste gases | Total mercury concentration Range (0,0033 – 770) μg/m3 Range (0,007 – 87,5) μg in the sample Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 ← | |
| 37 | Waste gases | Total mercury emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13211+AC:2006 ← | ||
| 38 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Aspiration method using activated carbon | PN-EN 13649:2005 ← | |
| 39 | Waste gases | Emission of individual gaseous organic compounds (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 13649:2005 ← | ||
| 40 | Waste gases | Water vapour concentration (H20) Range (23 – 250) g/m3 Range (3 – 40) % Range (3,14 – 57)% Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Condensation-adsorption method; Temperature method | PN-EN 14790:2017-04 ← | |
| 41 | Waste gases | Concentration of organic substances in the form of gases and vapours expressed as total gaseous organic carbon Range (0,5 – 1000) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Continuous measurement with flame ionization detection (FID) | PN-EN 12619:2013-05 ← | |
| 42 | Waste gases | Emission of organic substances in gaseous and vapour form expressed as total gaseous organic carbon (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 12619:2013-05 ← | ||
| 43 | Waste gases | Sampling for determination of the concentration of sulfuric acid including sulfur trioxide Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Aspiration method using absorbing solutions | LBŚ-PB-24 issue 3 of 17.10.2022 ← | |
| 44 | Waste gases | Concentration / content of sulphuric acid Range (0,38 – 7650) mg/m3 Range (0,102 – 459) mg in the sample Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Thoron method | LBŚ-PB-24 issue 3 of 17.10.2022 ← | |
| 45 | Waste gases | Emission of H2SO4 (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
LBŚ-PB-24 issue 3 of 17.10.2022 ← | ||
| 46 | Waste gases | Concentration / content of sulfur trioxide Range (0,31 – 6250) mg/m3 Range (0,083 – 375) mg in the sample Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Thoron method | LBŚ-PB-24 issue 3 of 17.10.2022 ← | |
| 47 | Waste gases | SO3 emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
LBŚ-PB-24 issue 3 of 17.10.2022 ← | ||
| 48 | Waste gases | N2O concentration Range (0,8 – 980) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Non-dispersive infrared spectrometry (NDIR) | PN-EN ISO 21258:2010 ← | |
| 49 | Waste gases | N2O emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN ISO 21258:2010 ← | ||
| 50 | Waste gases | Ammonia concentration NH3 (0,38 − 38) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Fourier transform infrared spectroscopy (FTIR) | LBŚ-PB-23 issue 4 of 13.07.2020 ← | ISO 17179:2016 | |
| 51 | Waste gases | NH3 emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
LBŚ-PB-23 issue 4 of 13.07.2020 ← | ISO 17179:2016 | ||
| 52 | Waste gases | Sampling for determination of ammonia | PN-EN ISO 21877:2020-03 | ||
| 53 | Waste gases | Ammonia concentration / content Range (0,06 – 629) mg/m3 Range (0,095 – 236) mg/l in the sample |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 54 | Waste gases | Ammonia emission (calculated) | PN-EN ISO 21877:2020-03 | ||
| 55 | Waste gases | Methane concentration CH4 (0,4 – 71,0) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Fourier transform infrared spectroscopy method (FT-IR) | LBŚ-PB-23 issue 4 of 13.07.2020 ← | |
| 56 | Waste gases | CH4 emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
LBŚ-PB-23 issue 4 of 13.07.2020 ← | ||
| 57 | Waste gases | Sampling for the determination of PAH concentration Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Condensation-adsorption method with a heated filter | ISO 11338-1:2003 – Method B ← | |
| 58 | Waste gases | PAH emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
ISO 11338-1:2003 – Method B ← | ||
| 59 | Waste gases | Sampling for determination of the concentration of oxidised, elemental and particulate mercury | LBŚ-PB-22 issue 4 of 30.11.2016 | ||
| 60 | Waste gases | Emission of Hg22+, Hg2+, Hg0, Hgdust (calculated) | LBŚ-PB-22 issue 4 of 30.11.2016 | ||
| 61 | Waste gases | Sampling for determination of metal concentrations (As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V, Be, Sn, Zn, Se, Te) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14385:2025 -05 ← | ||
| 62 | Waste gases | Emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V, Be, Sn, Zn, Se, Te (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14385:2025 -05 ← | ||
| 63 | Waste gases | Sampling for determination of the mass concentration of dioxin-like PCBs | PN-EN 1948-4+A1:2014-03 | ||
| 64 | Waste gases | PCB emission (calculated) | PN-EN 1948-4+A1:2014-03 | ||
| 65 | Waste gases | Sampling for the determination of formaldehyde | CEN/TS 17638:2021 | ||
| 66 | Waste gases | Formaldehyde concentration / content Range (0,035 – 700) mg/m3 Range (0,0042 – 42) mg in the sample |
Spectrophotometric method | CEN/TS 17638:2021 | |
| 67 | Waste gases | Emission of CH2O (calculated) | CEN/TS 17638:2021 | ||
| 68 | Waste gases | Sampling for the determination of hydrogen sulphide | LBŚ-PB-25 issue 1 of 15.03.2024 | ||
| 69 | Waste gases | Hydrogen sulphide concentration / content Range (0,055 – 373) mg/m3 Range (0,01 – 11,2) mg in the sample |
Spectrophotometric method | LBŚ-PB-25 issue 1 of 15.03.2024 | |
| 70 | Waste gases | H2S emission (calculated) | LBŚ-PB-25 issue 1 of 15.03.2024 | ||
| 71 | Waste gases | Sampling for the determination of brominated flame retardants | PN-EN 1948-1:2006 | LBŚ-IR-36 issue 6 of 11.03.2024 | ||
| 72 | Waste gases | Emission of brominated flame retardants (calculated) | PN-EN 1948-1:2006 | LBŚ-IR-36 issue 6 of 11.03.2024 | ||
| 73 | Waste gases | Sampling for determination of methane concentration (CH4) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN ISO 25139:2011 ← | ||
| 74 | Waste gases | Emission of methane (CH4) (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN ISO 25139:2011 ← | ||
| 75 | Waste gases | Dust sampling for the determination of PM 2,5 and PM 10 dust concentration Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN ISO 23210:2010 ← | ||
| 76 | Waste gases | PM 2,5 dust concentration Range (0,0002 – 0,04) g/m3 PM 10 dust concentration Range (0,0003 – 0,04) g/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method (impactor) | PN-EN ISO 23210:2010 ← | |
| 77 | Waste gases | PM 2,5 and PM 10 dust emission (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN ISO 23210:2010 ← | ||
| 78 | Automated Measuring Systems (AMS) | AMS calibration (QAL2) for: dust, SO2, NO, NO2, NOx, CO O2, CO2, N2O, H2O, HF, HCl, Hg, TVOC Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14181:2015 ← | ||
| 79 | Automated Measuring Systems (AMS) | Annual surveillance test (AST) for: dust, SO2, NO, NO2, NOx, CO O2, CO2, N2O, H2O, HF, HCl, Hg, TVOC Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14181:2015 ← | ||
| 80 | Automated Measuring Systems (AMS) | Dust concentration Range (0,001 – 100) g/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method | PN-Z-04030-7:1994 ← | |
| 81 | Automated Measuring Systems (AMS) | Dust concentration Range (0,0002 – 0,05) g/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method | PN-EN 13284-1:2018-02 ← | |
| 82 | Automated Measuring Systems (AMS) | SO2 concentration Range (1 – 15000) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Thoron method | PN-EN 14791:2017-04 ← | |
| 83 | Automated Measuring Systems (AMS) | NO concentration Range (0,7 – 1340) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Chemiluminescence method | PN-EN 14792:2017-04 ← | |
| 84 | Automated Measuring Systems (AMS) | NO2 concentration Range (1,1 – 2050) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Chemiluminescence method | PN-EN 14792:2017-04 ← | |
| 85 | Automated Measuring Systems (AMS) | NOx concentration Range (1,1 – 2050) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Chemiluminescence method | PN-EN 14792:2017-04 ← | |
| 86 | Automated Measuring Systems (AMS) | CO concentration Range (0,8 - 6250) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
NDIR method | PN-EN 15058:2017-04 ← | |
| 87 | Automated Measuring Systems (AMS) | O2 concentration Range (0,1 – 25) % Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Paramagnetic method | PN-EN 14789:2017-04 ← | |
| 88 | Automated Measuring Systems (AMS) | CO2 concentration Range (0,1 – 30) % Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
NDIR method | ISO 12039:2019 ← | |
| 89 | Automated Measuring Systems (AMS) | Water vapour concentration (H2O) Range (23 − 250) mg/m3 Range (3 – 40) % Range (3,14 − 57)% Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Condensation- adsorption method; Temperature method | PN-EN 14790:2017-04 ← | |
| 90 | Automated Measuring Systems (AMS) | HF concentration Range (0,1 − 200) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Method using an ion-selective electrode | ISO 15713:2006 ← | |
| 91 | Automated Measuring Systems (AMS) | HCl concentration Range (0,1 − 5000) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Spectrophotometric method | PN-EN 1911:2011 ← | |
| 92 | Automated Measuring Systems (AMS) | Total mercury concentration Range (0,0033 – 770) μg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006 ← | |
| 93 | Automated Measuring Systems (AMS) | Concentration of organic substances in the form of gases and vapours expressed as total gaseous organic carbon Range (0,5 – 1000) mg/m3 Regulated area: Continuous measurements of emissions to air from stationary sources carried out for the purposes of the regulated area
The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law.
The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Continuous measurement method with flame ionization detection (FID) | PN-EN 12619:2013-05 ← | |
| 94 | Automated Measuring Systems (AMS) | AMS calibration (QAL2) for: NH3, N2O, CH2O Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14181:2015 ← | ||
| 95 | Automated Measuring Systems (AMS) | Annual surveillance test (AST) for: NH3, N2O, CH2O Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-EN 14181:2015 ← | ||
| 96 | Automated Measuring Systems (AMS) | NH3 concentration Range (0,38 − 38) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Fourier transform infrared spectroscopy (FTIR) | LBŚ-PB-23 issue 4 of 13.07.2020 ← | ISO 17179:2016 | |
| 97 | Automated Measuring Systems (AMS) | N2O concentration Range (1,97 – 3900) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Fourier transform infrared spectroscopy (FTIR) | LBŚ-PB-23 issue 4 of 13.07.2020 ← | |
| 98 | Automated Measuring Systems (AMS) | Ammonia concentration Range (0,06 – 629) mg/m3 |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 99 | Automated Measuring Systems (AMS) | N2O concentration Range (0,8 – 980) mg/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Non-dispersive infrared spectrometry (NDIR) | PN-EN 21258:2010 ← | |
| 100 | Automated Measuring Systems (AMS) | Formaldehyde concentration Range (0,035 – 700) mg/m3 |
Spectrophotometric method | CEN/TS 17638:2021 | |
| 101 | Waste gas dedusting equipment | Dust concentration Range (0,0002 – 100) g/m3 Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Gravimetric method | PN-87/M-34129:1987 – Method A ← | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | |
| 102 | Waste gas dedusting equipment | Dust removal efficiency (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
PN-87/M-34129:1987 – Method A ← | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 103 | General environment – waste gas samples collected on filters | Mercury content Range (0,01 – 0,125) μg in the sample Regulated area: * - the method is applicable as a reference method in the regulated area |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006* | |
| 104 | General environment – waste gas samples collected into absorbing solution | Mercury content Range (0,007 – 87,5) μg in the sample Regulated area: * - the method is applicable as a reference method in the regulated area |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211+AC:2006* | |
| 105 | General environment – waste gas samples collected into absorbing solution | Hydrogen chloride content Range (0,02 – 300) mg in the sample Regulated area: * - the method is applicable as a reference method in the regulated area |
Spectrophotometric method | PN-EN 1911:2011* | |
| 106 | General environment – waste gas samples collected into absorbing solution | Hydrogen fluoride content Range (0,01 – 20) mg in the sample Regulated area: * - the method is applicable as a reference method in the regulated area |
Method using an ion-selective electrode | ISO 15713:2006* | |
| 107 | General environment – waste gas samples collected into absorbing solution | Ammonia content Range (0,095 – 236) mg/l in the sample |
Spectrophotometric method | PN-EN 21877:2020-03 | |
| 108 | General environment – waste gas samples collected into absorbing solution | Formaldehyde content Range (0,0042 – 42) mg in the sample |
Spectrophotometric method | CEN/TS 17638:2021 | |
| 109 | General environment – waste gas samples collected into absorbing solution | Hydrogen sulphide content Range (0,01 – 11,2) mg in the sample |
Spectrophotometric method | LBŚ-PB-25 issue 1 of 15.03.2024 | |
| 110 | General environment − noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level Range (26 – 136) dB Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Direct measurement method | Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706) excluding point EII1 and point F ← | |
| 111 | General environment − noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated) Regulated area: The laboratory formulates opinions and interpretations in test reports for the tests marked with the symbol ← |
Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706) excluding point EII1 and point F ← | ||
| 112 | Machinery and equipment – noise | A-weighted equivalent sound pressure level Range (26 − 136) dB |
Direct measurement method | PN-EN ISO 3746:2011 | PN-EN ISO 3746:2011/Ap1:2017-09 | |
| 113 | Machinery and equipment – noise | Sound power level (calculated) | PN-EN ISO 3746:2011 | PN-EN ISO 3746:2011/Ap1:2017-09 | ||
| 114 | Workplace environment − noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (26 – 136) dB C-weighted peak sound pressure level Range (40 – 140) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 | |
| 115 | Workplace environment − noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11 | ||
| 116 | Workplace environment − lighting | Illuminance Range (0,5 – 9 750) lx |
Direct measurement method | LBŚ-PB-14 issue 4 of 30.06.2025 | PN-83/E-04040.03 | |
| 117 | Workplace environment − lighting | Illuminance uniformity (calculated) | LBŚ-PB-14 issue 4 of 30.06.2025 | PN-83/E-04040.03 | ||
| 118 | Workplace environment − whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,053 – 100) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 119 | Workplace environment − whole-body vibration | Daily exposure, expressed as the energy-equivalent for 8 hours of the r.m.s., frequency-weighted vibration acceleration, dominant among the vibration accelerations, determined for the three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz), Exposure lasting 30 minutes and less, expressed as the r.m.s., frequency-weighted vibration acceleration, dominant among the vibration accelerations, determined for the three directional components taking into account the appropriate factors (1,4awx, 1,4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 120 | Workplace environment - moderate microclimate | Air temperature Range (10 – 50) 0C Black globe temperature Range (10 – 50) 0C Air humidity Range (25 – 75) % Air velocity Range (0,20 – 5) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | |
| 121 | Workplace environment - moderate microclimate | PMV and PPD index (calculated) | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | ||
| 122 | Workplace environment - hot microclimate | Air temperature Range (10 – 50) 0C Natural wet bulb temperature Range (10 – 50) 0C Black globe temperature Range (10 – 50) 0C |
Direct measurement method | PN-EN ISO 7243:2018-01 | PN-EN ISO 7243:2018-01/Ap2:2020-04 | |
| 123 | Workplace environment - hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018-01 | PN-EN ISO 7243:2018-01/Ap2:2020-04 | ||
| 124 | Workplace environment − air | Sampling for assessment of occupational exposure: dust agents inhalable fraction respirable fraction metals and their compounds, including inhalable fraction respirable fraction organic substances, including inhalable fraction inorganic substances, including inhalable fraction respirable fraction thoracic fraction |
Personal dosimetry method | PN-Z-04008-7:2002 | PN-Z-04008-7:2002/Az1:2004 | |
| 125 | Workplace environment − air | Sampling for assessment of occupational exposure: inorganic substances, including inhalable fraction respirable fraction thoracic fraction |
Stationary method | PN-Z-04008-7:2002 | PN-Z-04008-7:2002/Az1:2004 | |
| 126 | Workplace environment − air | Exposure index (calculated) | PN-Z-04008-7:2002 | PN-Z-04008-7:2002/Az1:2004 | ||
| 127 | Workplace environment − air | Concentration of harmful dust agents - inhalable fraction Petroleum bitumen Apatites and phosphorites Portland cement Titanium dioxide Natural graphite Synthetic graphite Kaolin Amorphous and synthetic silica Wood dusts Flour dusts Dusts not classified according to toxicity Organic dusts of animal and plant origin, excluding wood and flour dusts Calcium sulfate (VI) (gypsum) Carbon black Talc Coal (hard, brown) Calcium magnesium carbonate (dolomite) Silicon carbide, non-fibrous Range (0,08 – 81,6) mg/m3 Range (0,06 – 2,45) mg in the sample |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/Ap1:2022-08 | |
| 128 | Workplace environment − air | Concentration of harmful dust agents - respirable fraction Apatites and phosphorites Portland cement Natural graphite Amorphous and synthetic silica Organic dusts of animal and plant origin, excluding wood and flour dusts Talc Coal (hard, brown) Range (0,05 – 43,8) mg/m3 Range (0,05 – 5,0) mg in the sample |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/Ap1:2022-08 | |
| 129 | Workplace environment − air | Concentration of highly refined mineral oils excluding metalworking fluids inhalable fraction Range (0,42 – 22,2) mg/m3 |
UV spectrophotometry method | PN-Z-04108-6:2006+Az1:2009 | |
| 130 | Workplace environment − air | Carbon monoxide concentration Range (2,3 – 250) mg/m3 Range (2,00 – 215) ppm |
Electrochemical method | LBŚ-PB-12 issue 4 of 30.06.2025 | |
| 131 | Workplace environment − air | Nitrogen oxide concentration Range (0,012 – 11,56) mg/m3 Range (0,0096 – 9,28) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 132 | Workplace environment − air | Nitrogen dioxide concentration Range (0,018 – 17,78) mg/m3 Range (0,0094 – 9,31) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 133 | Workplace environment − air | Hydrogen chloride concentration/content Range (0,5 – 50,0) mg/m3 Range (0,2 – 20,0) mg in the sample |
Turbidimetric method | PN-Z-04450:2014-08 | |
| 134 | Workplace environment − air | Sulphur dioxide concentration/content Range (0,13 − 6,40) mg/m3 Range (0,049 – 2,41) ppm Range (0,0032 – 0,064) mg in the sample |
Spectrophotometric method | PN-Z-04015-12:1996+Ap1:2001 | |
| 135 | Workplace environment − air | Ammonia concentration/content Range (1,3 – 60) mg/m3 Range (0,02 – 0,2) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 136 | Workplace environment − air | Concentration / content of crystalline silica - quartz; cristobalite respirable fraction Range (0,0093 – 0,58) mg/m3 Range (0,01 – 0,4) mg in the sample |
Fourier transform infrared spectrometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130 | |
| 137 | Groundwater | Sampling for chemical and physical testing | PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3 | ||
| 138 | Groundwater | Temperature Range (0,5 – 50,0) °C |
PN-77/C-04584 | ||
| 139 | Wastewater, Rainwater, Snowmelt water | Sampling for chemical and physical testing | Manual method | PN-ISO 5667-10:2021-11 | |
| 140 | Wastewater, Rainwater, Snowmelt water | Temperature Range (0,5 – 50,0) °C |
PN-77/C-04584 | ||
| 141 | Surface water | Sampling for chemical and physical testing | Manual method | PN-EN ISO 5667-6:2016-12 excluding cl. 7.6 | PN-EN ISO 5667-6:2016-12 /A11:2020-10 | |
| 142 | Surface water | Temperature Range (0,5 – 50,0) °C |
PN-77/C-04584 | ||
| 143 | Water, Wastewater | pH Range (2,0 – 12) Regulated area: + Tests performed at and outside the laboratory premises |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 144 | Water, Wastewater | Electrical conductivity Range (5 – 12900) μS/cm Regulated area: + Tests performed at and outside the laboratory premises |
Conductometric method | PN-EN 27888:1999 | |
| 145 | Water, Wastewater | Total alkalinity Composite alkalinity Range (0,40 – 20) mmol/l Range (0,20 – 10) mmol/l CaCO3 |
Titrimetric method | PN-EN ISO 9963-1:2001+Ap1:2004 | |
| 146 | Water, Wastewater | Bicarbonate (HCO3-) concentration (calculated) | PN-EN ISO 9963-1:2001+Ap1:2004 | ||
| 147 | Water, Wastewater | Total acidity Range (0,05 – 5) mmol/l |
Titrimetric method | PN-90/C-04540/03+Az1:2003 | |
| 148 | Water, Wastewater | Total content of calcium and magnesium (total hardness) Range (0,05 – 10) mmol/l Range (5 – 1000) mg/l CaCO3 |
Titrimetric method | PN-ISO 6059:1999 | |
| 149 | Water, Wastewater | Calcium concentration Range (0,05 – 10) mmol/l Range (2 – 400) mg/l Ca |
Titrimetric method | PN-ISO 6058:1999 | |
| 150 | Water, Wastewater | Iron concentration Range (0,02 – 25) mg/l |
Spectrophotometric method | PN-ISO 6332:2001 | |
| 151 | Water, Wastewater | Orthophosphate concentration Range (0,04 – 6,4) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 + Ap2:2010 cl. 4 | |
| 152 | Water, Wastewater | Total phosphorus concentration Range (0,04 – 8,0) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 + Ap2:2010 cl. 7 | |
| 153 | Water, Wastewater | Chemical oxygen demand COD-Cr Range (30 – 700) mg/l |
Titrimetric method | PN ISO 6060:2006 | |
| 154 | Water, Wastewater | Dissolved solids Range (40 – 2000) mg/l |
Gravimetric method | PN-EN 15216:2022-03 | |
| 155 | Water, Wastewater | Dry residue Range (40 – 2500) mg/l |
Gravimetric method | PN-78/C-04541 | |
| 156 | Water, Wastewater, Rainwater, Snowmelt water | Total suspended solids (TSS) Range (2,0 – 1000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 157 | Water, Wastewater | Chloride concentration Range (5,0 − 1000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 158 | Water, Wastewater | Sulfate concentration Range (10,0 1000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 159 | Water, Wastewater | Fluoride concentration range (0,10 - 10) mg/l |
Potentiometric method | PN-78/C-04588.03 | |
| 160 | Water, Wastewater | Nitrate nitrogen concentration Range (0,10 – 50) mg/l Nitrate concentration Range (0,44 - 221) mg/l |
Spectrophotometric method | PN-82/C-04576.08 | |
| 161 | Water, Wastewater | Nitrite nitrogen concentration range (0,006 – 3,0) mg/l Nitrite concentration Range (0,02 – 10,0) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 162 | Water, Wastewater | Ammonium nitrogen concentration Range (0,025 – 40,0) mg/l Ammonium ion concentration Range (0,032 – 51,6) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 163 | Water, Wastewater | Mercury concentration Range (0,1 – 1250) μg/l |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012+Ap1:2016-07 | |
Reference standards (93)
CEN/TR 17078:2017-03
CEN/TS 17638:2021
ISO 11338-1:2003 – Method B ←
ISO 12039:2019 ←
ISO 15713:2006 ←
ISO 15713:2006*
ISO 17179:2016
LBŚ-IR-36 issue 6 of 11.03.2024
LBŚ-PB-12 issue 4 of 30.06.2025
LBŚ-PB-14 issue 4 of 30.06.2025
LBŚ-PB-22 issue 4 of 30.11.2016
LBŚ-PB-23 issue 4 of 13.07.2020 ←
LBŚ-PB-24 issue 3 of 17.10.2022 ←
LBŚ-PB-25 issue 1 of 15.03.2024
PN ISO 6060:2006
PN-71/Z-04041
PN-77/C-04584
PN-78/C-04541
PN-78/C-04588.03
PN-82/C-04576.08
PN-83/E-04040.03
PN-87/M-34129:1987 – Method A ←
PN-90/C-04540/03+Az1:2003
PN-EN 12619:2013-05 ←
PN-EN 13211+AC:2006 ←
PN-EN 13211+AC:2006*
PN-EN 13284-1:2018-02
PN-EN 13284-1:2018-02 ←
PN-EN 13649:2005 ←
PN-EN 14181:2015 ←
PN-EN 14253+A1:2011
PN-EN 14385:2025 -05 ←
PN-EN 14385:2025-05 ←
PN-EN 14789:2017-04 ←
PN-EN 14790:2017-04 ←
PN-EN 14791:2017-04 ←
PN-EN 14792:2017-04 ←
PN-EN 15058:2017-04 ←
PN-EN 15216:2022-03
PN-EN 1911:2011 ←
PN-EN 1911:2011*
PN-EN 1948-1:2006
PN-EN 1948-4+A1:2014-03
PN-EN 21258:2010 ←
PN-EN 21877:2020-03
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 872:2007+Ap1:2007
PN-EN ISO 10523:2012
PN-EN ISO 12846:2012+Ap1:2016-07
PN-EN ISO 16911-1:2013
PN-EN ISO 21258:2010 ←
PN-EN ISO 21877:2020-03
PN-EN ISO 23210:2010 ←
PN-EN ISO 25139:2011 ←
PN-EN ISO 3746:2011
PN-EN ISO 3746:2011/Ap1:2017-09
PN-EN ISO 5667-6:2016-12 /A11:2020-10
PN-EN ISO 5667-6:2016-12 excluding cl. 7.6
PN-EN ISO 6878:2006+Ap1:2010 + Ap2:2010 cl. 4
PN-EN ISO 6878:2006+Ap1:2010 + Ap2:2010 cl. 7
PN-EN ISO 7243:2018-01
PN-EN ISO 7243:2018-01/Ap2:2020-04
PN-EN ISO 7730:2006
PN-EN ISO 7730:2006/Ap2:2016-04
PN-EN ISO 9612:2011 excluding the method covering strategy 2 - cl. 10 and strategy 3 - cl. 11
PN-EN ISO 9963-1:2001+Ap1:2004
PN-ISO 10396:2001
PN-ISO 10396:2001 ←
PN-ISO 5667-10:2021-11
PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3
PN-ISO 6058:1999
PN-ISO 6059:1999
PN-ISO 6332:2001
PN-ISO 7150-1:2002
PN-ISO 7935:2000
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-N-01307:1994
PN-Z-04008-7:2002
PN-Z-04008-7:2002/Az1:2004
PN-Z-04009-11:2008
PN-Z-04015-12:1996+Ap1:2001
PN-Z-04030-7:1994
PN-Z-04030-7:1994 ←
PN-Z-04108-6:2006+Az1:2009
PN-Z-04450:2014-08
PN-Z-04507:2022-05
PN-Z-04507:2022-05/Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05/Ap1:2022-08
Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130
Annex No. 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws of 2023, item 1706) excluding point EII1 and point F ←