🇵🇱 ŚLĄSKIE CENTRUM OCHRONY PRACY Sp. z o. o. PL
EnvironmentWater & wastewaterMaterials & polymersPetrochemistry & fuels
ŚLĄSKIE CENTRUM OCHRONY PRACY Sp. z o. o. is a laboratory accredited by PCA under number AB 719 (Czeladź, Poland). Its accreditation scope covers 197 test methods in the following areas: Environment, Water & wastewater, Materials & polymers, Petrochemistry & fuels. Test objects include: Workplace environment - air samples collected on filters, Water, wastewater, Workplace environment - air samples collected on activated carbon s…, General environment - waste gas samples collected on activated carb…. Most frequently used techniques: Gas chromatography with flame ionization detection (GC–FID), Inductively coupled plasma optical emission spectrometry (ICP-OES), Spectrophotometric method.
At a glance
- Accreditation number: PCA AB 719
- Methods in scope: 197
- Types of test objects: 29
- Techniques used: 25
- City: Czeladź, Poland
- Accreditation number
- AB 719
- Accreditation body
- PCA
- Address
- LABORATORIUM BADAŃ ŚRODOWISKOWYCH, ul. Wojkowicka 21D, 41-250 Czeladź
- City
- Czeladź, Poland
What this laboratory tests (29)
- Workplace environment - air samples collected on filters — 31 methods
- Water, wastewater — 22 methods
- Workplace environment - air samples collected on activated carbon sorbent tubes — 21 methods
- General environment - waste gas samples collected on activated carbon sorbent tubes — 18 methods
- Soils, ground — 13 methods
- General environment - waste gas samples collected on filters and into impingers with absorbing solution — 12 methods
- General environment - waste gas samples collected on filters, into impingers with absorbing solution — 12 methods
- Workplace environment - air samples collected on filters or into impingers with absorbing solution — 11 methods
- General environment - waste gas samples collected into impingers with absorbing solution — 9 methods
- Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel — 7 methods
- Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution — 6 methods
- General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes — 5 methods
- Workplace environment – non-laser op- tical radiation — 5 methods
- Workplace environment - air samples collected on glass fibre filters and XAD-2 sorbent tubes — 4 methods
- General environment - waste gas samples collected into impingers with absorbing solution, on filters, prepared filters — 3 methods
- and 14 more
Analytical techniques used (25)
- Gas chromatography with flame ionization detection (GC–FID) — 51 methods
- Inductively coupled plasma optical emission spectrometry (ICP-OES) — 46 methods
- Spectrophotometric method — 31 methods
- High-performance liquid chromatography with diode array detection (HPLC-DAD) — 9 methods
- Gas chromatography with flame ionization detection (GC-FID) — 7 methods
- High-performance liquid chromatography with fluorescence detection (HPLC-FLD) — 7 methods
- Phase-contrast optical microscopy method — 5 methods
- Cold vapour atomic absorption spectrometry (CVAAS) — 4 methods
- Gravimetric method — 3 methods
- Potentiometric method — 3 methods
- Atomic absorption spectrometry with amalgamation technique (CVAAS) — 2 methods
- Gas chromatography with mass spectrometry detection (GC-MS) — 2 methods
- Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) — 2 methods
- Calculation method — 1 method
- Fourier transform infrared spectrometry (FT-IR) — 1 method
- and 10 more
Laboratory locations
- ŚLĄSKIE CENTRUM OCHRONY PRACY Sp. z o. o. (main site) — ul. Wojkowicka 21D, 41-250 Czeladź
- ENVIRONMENTAL TESTING LABORATORY — ul. Wojkowicka 21D
Certificate information
- Issue date
- 08.05.2026
- Issue no.
- 28
Accreditation scope — test methods (197)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Environmental Testing Laboratory | |||||
| 1 | Workplace environment – non-laser op- tical radiation | Effective irradiance, UVA, UVB, UVC in the spectral range 180 – 400 nm, Measurement range: (5,00*10-5 – 25) W/m2 | Test method: A | PN-EN 14255-1:2010 | |
| 2 | Workplace environment – non-laser op- tical radiation | Effective irradiation with hazardous ultraviolet in the spectral range 180 – 400 nm (calculated) | PN-EN 14255-1:2010 | ||
| 3 | Workplace environment – non-laser op- tical radiation | Effective irradiance, VIS in the spectral range 300 – 700 nm, Measurement range: (7,41*10-6 – 7,41*103) W/m2 | Test method: O | PN-EN 14255-2:2010 | |
| 4 | Workplace environment – non-laser op- tical radiation | Effective radiance, VIS in the spectral range 300 – 700 nm, Measurement range: (5,56*10-5 – 5,56*104) Wm-2sr-1 | Test method: D | PN-EN 14255-2:2010 | |
| 5 | Workplace environment – non-laser op- tical radiation | Irradiance of IRA, IRB in the spectral range 780 – 3000 nm, Measurement range: (0,857 – 9520) W/m2 | Test method: R | PN-EN 14255-2:2010 | |
| 6 | Workplace environment - air samples collected on filters | Crystalline silica (quartz, cristobalite) content respirable fraction (0,0050 – 0,40) mg in the sample |
Fourier transform infrared spectrometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2012, issue 4(74), pp. 117-130 | |
| 7 | Workplace environment - air samples collected on filters | Content refractory ceramic fibres refractory ceramic fibres in a mixture with other man-made mineral fibres Range (1102,5 – 330 750) fibres in the sample |
Phase-contrast optical microscopy method | PA-13 issue 9 of 01.12.2025 | |
| 8 | Workplace environment - air samples collected on filters | Content of man-made mineral fibres except refractory ceramic fibres respirable fibres Range (2205 – 220 500) fibres in the sample |
Phase-contrast optical microscopy method | PA-13 issue 9 of 01.12.2025 | |
| 9 | Workplace environment - air samples collected on filters | Content of silicon carbide, fibrous respirable fibres Range (2205 – 220 500) fibres in the sample |
Phase-contrast optical microscopy method | PA-13 issue 9 of 01.12.2025 | |
| 10 | Workplace environment - air samples collected on filters | Asbestos content (one or more types of asbestos listed below) – respirable fibres: – actinolite asbestos – anthophyllite asbestos – chrysotile asbestos – amosite asbestos – crocidolite asbestos – tremolite asbestos Range (220,5 – 220 500) fibres in the sample |
Phase-contrast optical microscopy method | PN-88/Z-04202/02 | |
| 11 | General environment - air samples collected on filters, Indoor spaces - air samples collected on filters | Asbestos content – respirable fibres: Range (220,5 – 220 500) fibres in the sample |
Phase-contrast optical microscopy method | PA-13 issue 9 of 01.12.2025 | PN-88/Z-04202/02 | |
| 12 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Content of highly refined mineral oils excluding metalworking fluids inhalable fraction Range (0,20 – 8,0) mg in the sample |
Infrared absorption spectrophotometry method (IR) | PN-Z-04108-5:2006 | |
| 13 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Ammonia content Range (0,030 – 3,00) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 14 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Hydrogen chloride content Range (0,020 – 1,00) mg in the sample |
Turbidimetric method | PN-93/Z-04225/03 PA-02 issue 6 of 04.11.2024 | |
| 15 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Nitrogen dioxide and nitrogen monoxide content NO2 (0,0010 – 0,080) mg in the sample NO (0,00065 – 0,052) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 16 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Nitric (V) acid content (calculated) | PN-Z-04009-11:2008 | ||
| 17 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Sulfur dioxide content Range (0,00320 – 0,064) mg in the sample |
Spectrophotometric method | PN-Z-04015-12:1996 + Ap1:2001 | |
| 18 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Ozone content Range (0,00100 – 0,0100) mg in the sample |
Spectrophotometric method | PN-Z-04007-2:1994 | |
| 19 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Hydrogen sulphide content Range (0,0200 – 0,160) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 20 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Hydrogen fluoride content Range (0,0100 – 0,300) mg in the sample Fluoride content calculated as F Range (0,0100 – 0,300) mg in the sample |
Spectrophotometric method | PN-82/Z-04093.03 | |
| 21 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Phosphoric(V) acid content Range (0,00253– 0,126) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 PA-59 issue 1 of 01.09.2022 excluding cl. 3.8 | |
| 22 | Workplace environment - air samples collected on filters or into impingers with absorbing solution | Tetraphosphorus decaoxide content Range (0,00183– 0,092) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 | |
| 23 | Workplace environment - air samples collected into impingers with absorbing solution | Chlorine content Range (0,0010 – 0,0060) mg in the sample |
Spectrophotometric method | PN-75/Z-04037/03 PA-60 issue 1 of 04.11.2024 | |
| 24 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Hydrogen cyanide content – calculated as CN Range (0,00030 – 0,0240) mg in the sample |
Spectrophotometric method | PN-70/Z-04053 | |
| 25 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Ammonium chloride content vapours and inhalable fraction Range (0,094 – 9,4) mg in the sample |
Spectrophotometric method | PN-Z-04265:2000 | |
| 26 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Glutaraldehyde content Range (0,00040 – 0,060) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PN-Z-04290:2002 | |
| 27 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Acrylaldehyde content Range (0,00040 – 0,0400) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PN-Z-04045-16:2010 | |
| 28 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Formaldehyde content Range (0,00040 – 0,060) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100 | |
| 29 | Workplace environment - air samples collected on filters, treated filters, treated sorbent tubes with silica gel or into impingers with absorbing solution | Benzo[a]pyrene content Range (0,0000050 – 0,00400) mg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-2:1999 | |
| 30 | Workplace environment - air samples collected on filters | Dibenzo[a,h]anthracene content Range (0,0000050 – 0,00400) mg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-4:1999 | |
| 31 | Workplace environment - air samples collected into impingers with absorbing solution | Methylenebis(phenyl isocyanate) content Range (0,00031 – 0,025) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PA-28 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 32 | Workplace environment - air samples collected into impingers with absorbing solution | Content of mercury - vapour and its inorganic compounds expressed as Hg Range (0,00010 – 0,080) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PA-30 issue 6 of 27.01.2020 excluding cl. 3.6 | |
| 33 | Workplace environment - air samples collected on filters | Content of tin and its inorganic compounds excluding stannane calculated as Sn inhalable fraction Range (0,0010 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04488:2017-10 cl. 7 | |
| 34 | Workplace environment - air samples collected on filters | Content of metallic aluminium, aluminium powder (unstabilised) inhalable fraction Range (0,0025 – 5,00) mg in the sample respirable fraction Range (0,0025 – 2,50) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04263-1:2012 cl. 6 | |
| 35 | Workplace environment - air samples collected on filters | Content of aluminium trioxide expressed as Al inhalable fraction Range (0,0025 – 5,00) mg in the sample respirable fraction Range (0,0025 – 2,50) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04263-1:2012 cl. 6 | |
| 36 | Workplace environment - air samples collected on filters | Content of barium and its soluble compounds calculated as Ba Range (0,00010 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04024-3:2012 cl. 6 + Ap1:2013 | |
| 37 | Workplace environment - air samples collected on filters | Content of metallic chromium and its compounds (chromium(II), chromium(III), chromium(VI) – calculated as Cr Range (0,00080 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04434:2011 cl. 6 | |
| 38 | Workplace environment - air samples collected on filters | Content of metallic chromium, chromium(II) compounds – calculated as Cr(II), chromium(III) compounds – calculated as Cr(III) | Calculation method | PA-57 issue 3 of 23.07.2021 excluding cl. 3.6 | |
| 39 | Workplace environment - air samples collected on filters | Zinc oxide content calculated as Zn inhalable fraction Range (0,00010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-87/Z-04100/03 cl. 7 | |
| 40 | Workplace environment - air samples collected on filters | Content of cadmium and its inorganic compounds calculated as Cd inhalable fraction Range (0,00020 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04102-3:2013-10 cl. 6 | |
| 41 | Workplace environment - air samples collected on filters | Content of cobalt and its inorganic compounds expressed as Co Range (0,00050 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04291:2003 cl. 7 | |
| 42 | Workplace environment - air samples collected on filters | Content of manganese and its inorganic compounds calculated as Mn inhalable fraction Range (0,00010 – 5,00) mg in the sample respirable fraction Range (0,00010 – 2,50) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04472:2015-10 cl. 7 + Ap1:2015-12 | |
| 43 | Workplace environment - air samples collected on filters | Content of copper and its inorganic compounds - calculated Cu Range (0,00050 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04106-3:2002 cl. 7 | |
| 44 | Workplace environment - air samples collected on filters | Content of nickel compounds, calculated as Ni inhalable fraction respirable fraction Range (0,00050 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04502:2019-10 cl. 7 | |
| 45 | Workplace environment - air samples collected on filters | Metallic nickel content Range (0,00050 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04502:2019-10 cl. 7 | |
| 46 | Workplace environment - air samples collected on filters | Content of lead and its inorganic compounds - calculated as Pb inhalable fraction Range (0,00050 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04487:2017-10 cl. 7 | |
| 47 | Workplace environment - air samples collected on filters | Silver content inhalable fraction, Insoluble silver compounds expressed as Ag Range (0,0010 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04216-2:2012 cl. 6 | |
| 48 | Workplace environment - air samples collected on filters | Content of silver soluble compounds - expressed as Ag, Range (0,0010 – 1,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04503:2019-10 cl. 7 | |
| 49 | Workplace environment - air samples collected on filters | Magnesium oxide content inhalable fraction Range (0,00010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04470:2015-10 cl. 7 | |
| 50 | Workplace environment - air samples collected on filters | Calcium oxide content inhalable fraction Range (0,00010 – 10,0) mg in the sample respirable fraction Range (0,00010 – 5,00) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04442:2023-05 cl. 7 | |
| 51 | Workplace environment - air samples collected on filters | Calcium carbonate content inhalable fraction Range (0,00010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04294:2001 cl. 7 | |
| 52 | Workplace environment - air samples collected on filters | Calcium hydroxide content inhalable fraction Range (0,00010 – 5,00) mg in the sample respirable fraction Range (0,00010 – 2,50) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04497:2018-09 cl. 7 | |
| 53 | Workplace environment - air samples collected on filters | Content of iron oxides expressed as Fe iron (III) oxide iron (II) oxide triiron tetraoxide – inhalable fraction Range (0,00030 – 10,0) mg in the sample respirable fraction Range (0,00030 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04469:2025-02 cl. 8 | |
| 54 | Workplace environment - air samples collected on filters | Content of titanium and its compounds – calculated as Ti Range (0,0025– 15,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04489:2017-10 cl. 7 | |
| 55 | Workplace environment - air samples collected on filters | Potassium hydroxide content Range (0,0072– 3,59) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04436:2011 cl. 6 | |
| 56 | Workplace environment - air samples collected on filters | Sodium hydroxide content Range (0,0087 - 4,35) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 excluding cl. 3.6 | PN-Z-04435:2011 cl. 6 | |
| 57 | Workplace environment - air samples collected on filters | Content of chromium (VI) compounds – expressed as Cr (VI) Range (0,00035 – 0,0070) mg in the sample |
Spectrophotometric method | NIOSH No. 7600 Issue 3 PA-56 issue 3 of 01.10.2024 | |
| 58 | Workplace environment - air samples collected on activated carbon sorbent tubes | Content of organic substances acetone (0,0050 – 19,0) mg in the sample ethyl acrylate (0,010 – 18,9) mg in the sample cyclohexanol (0,010 – 18,4) mg in the sample cyclohexanone (0,010 – 19,0) mg in the sample dimethoxymethane (0,020 – 19,0) mg in the sample ethanol (0,010 – 15,0) mg in the sample diethyl ether (0,010 – 19,0) mg in the sample methyl methacrylate (0,010 – 19,0) mg in the sample 3-methylbutan-1-ol – isoamyl alcohol (0,010 – 19,7) mg in the sample butan-1-ol (0,011 – 19,0) mg in the sample butan-2-one (0,011 – 19,0) mg in the sample cyclohexane (0,010 – 19,0) mg in the sample n-butyl acetate (0,010 – 19,0) mg in the sample ethyl acetate (0,010 – 19,0) mg in the sample vinyl acetate (0,010 – 18,3) mg in the sample methanol (0,0100 – 3,00) mg in the sample propan-2-ol (0,0050 – 19,0) mg in the sample methyl acetate (0,50 – 15,0) mg in the sample acetonitrile (0,150 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PA-14 issue 11 of 15.04.2025 | |
| 59 | Workplace environment - air samples collected on activated carbon sorbent tubes | Benzene content Range (0,0010 – 0,100) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04016-10:2005 | |
| 60 | Workplace environment - air samples collected on activated carbon sorbent tubes | Content of organic substances cumene (0,0020 – 19,0) mg in the sample styrene (0,0022 – 19,0) mg in the sample ethylbenzene (0,0020 – 19,0) mg in the sample xylene - mixture of isomers: (1,2-; 1,3-; 1,4-) (0,0060 – 19,0) mg in the sample toluene (0,0020 – 19,0) mg in the sample trimethylbenzene - mixture of isomers (1,2,3-, 1,2,4- and 1,3,5-) (0,0021 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-15 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 61 | Workplace environment - air samples collected on activated carbon sorbent tubes | Content of organic substances 2-methoxyethanol (0,0060 – 8,0) mg in the sample 2-butoxyethyl acetate (0,0050 –15,0) mg in the sample 2-ethoxyethyl acetate (0,0060 – 15,0) mg in the sample 2-methoxyethyl acetate (0,0050 – 12,0) mg in the sample propan-1-ol (0,0050 – 15,0) mg in the sample tetrahydrofuran (0,0060 – 19,0) mg in the sample (2-methoxymethylethoxy)propanol - mixture of isomers: 1-(2-methoxy-1-methylethoxy)propan-2-ol 1-(2-methoxy-2-methylethoxy)propan-2-ol 2-(2-methoxy-1-methylethoxy)propan-1-ol (0,0050 – 15,0) mg in the sample 2-butoxyethanol (0,0050 – 15,0) mg in the sample 2-ethoxyethanol (0,0050 – 15,0) mg in the sample 2-methylpropan-1-ol (0,0050 – 15,0) mg in the sample 4-hydroxy-4-methylpentan-2-one (0,0100 – 15,0) mg in the sample 2-(2-butoxyethoxy)ethanol (0,0100 – 15,0) mg in the sample 2-ethylhexan-1-ol (0,0100 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-16 issue 10 of 15.04.2025 | |
| 62 | Workplace environment - air samples collected on activated carbon sorbent tubes | 1-methoxypropan-2-ol content Range (0,0060 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04354:2005 | |
| 63 | Workplace environment - air samples collected on activated carbon sorbent tubes | 4-methylpentan-2-one content Range (0,0050 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04372:2009 | |
| 64 | Workplace environment - air samples collected on activated carbon sorbent tubes | 2-methoxy-1-methylethyl acetate content Range (0,0060 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04119-10:2008 + Ap1:2011 | |
| 65 | Workplace environment - air samples collected on sorption tubes with silica gel | Naphthalene content Range (0,050– 1,60) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04098-3:2005 | |
| 66 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Content of organic substances 2-aminoethanol (0,010 – 15,5) mg in the sample phenol (0,0075 – 7,50) mg in the sample hexano-6-lactam - vapours and inhalable fraction (0,010 – 15,0) mg in the sample cresol - mixture of isomers (0,0075 – 7,50) mg in the sample triethylamine (0,010 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-17 issue 9 of 27.01.2020 excluding cl. 3.8 | |
| 67 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Hexane content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04136-3:2003 | |
| 68 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Hydrocarbon content heptane (0,010 – 19,0) mg in the sample octane (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-18 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 69 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Kerosene content Range (0,033 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04227-02:1992 cl. 8 PA-18 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 70 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Pentane content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04136-3:2003 cl. 8 PA-18 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 71 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | Ethylene glycol content Range (0,030 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04203-02:1988 cl. 8 PA-19 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 72 | Workplace environment - air samples collected on sorbent tubes with activated carbon or silica gel | White spirit content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04134-03:1981 cl. 8 PA-20 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 73 | Workplace environment - air samples collected on activated carbon sorbent tubes | Extraction naphtha content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04134-02:1981 cl. 8 PA-21 issue 6 of 27.01.2020 excluding cl. 3.8 | |
| 74 | Workplace environment - air samples collected on activated carbon sorbent tubes | Ethylene oxide content Range (0,0020 – 2,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04300:2002 cl. 8 PA-22 issue 7 of 24.01.2025 | |
| 75 | Workplace environment - air samples collected on activated carbon sorbent tubes | 1-chloro-2,3-epoxypropane content Range (0,0050 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04029-01:1981 cl. 8 PA-31 issue 7 of 24.01.2025 | |
| 76 | Workplace environment - air samples collected on activated carbon sorbent tubes | Chloroethene - vinyl chloride content Range (0,0050 – 2,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04112-01:1978 cl. 8 PA-31 issue 7 of 24.01.2025 | |
| 77 | Workplace environment - air samples collected on activated carbon sorbent tubes | Chloroform content Range (0,020 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04187-02:1988 cl. 7 PA-31 issue 7 of 24.01.2025 | |
| 78 | Workplace environment - air samples collected on activated carbon sorbent tubes | Trichloroethene content Range (0,020 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04047-02:1978 cl. 2.2.7 PA-31 issue 7 of 24.01.2025 | |
| 79 | Workplace environment - air samples collected on activated carbon sorbent tubes | Dichloromethane content Range (0,020 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04437:2011 cl. 6 PA-31 issue 7 of 24.01.2025 | |
| 80 | Workplace environment - air samples collected on activated carbon sorbent tubes | Tetrachloroethene content Range (0,020 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04118-01-1978 cl. 2.2.7 PA-31 issue 7 of 24.01.2025 | |
| 81 | Workplace environment - air samples collected on activated carbon sorbent tubes | 2-methoxypropyl acetate content Range (0,030 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04305:2003 cl. 8 PA-14 issue 11 of 15.04.2025 | |
| 82 | Workplace environment - air samples collected on activated carbon sorbent tubes | 2-methoxypropan-1-ol content Range (0,030 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-16 issue 10 of 15.04.2025 | |
| 83 | Workplace environment - air samples collected on activated carbon sorbent tubes | 1-methyl-2-pyrrolidone content Range (0,015 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | |
| 84 | Workplace environment - air samples collected on activated carbon sorbent tubes | 1-ethyl-2-pyrrolidone content Range (0,020 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | |
| 85 | Workplace environment - air samples collected on activated carbon sorbent tubes | 1,2-dimethoxyethane content Range (0,015 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | |
| 86 | Workplace environment - air samples collected on activated carbon sorbent tubes | Acrylonitrile content Range (0,0050 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-62 issue 2 of 15.04.2025 | |
| 87 | Workplace environment - air samples collected into Tedlar bag containers | Butane concentration Range (12,7 – 5320) mg/m3 Propane concentration Range (9,7 – 3960) mg/m3 |
Gas chromatography with flame ionization detection (GC–FID) | PA-23 issue 5 of 27.01.2020 excluding cl. 3.8 | |
| 88 | Workplace environment - air samples collected on glass fibre filters and XAD-2 sorbent tubes | Dibutyl phthalate content – inhalable fraction Range (0,020 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-63 issue 2 of 15.04.2025 | |
| 89 | Workplace environment - air samples collected on glass fibre filters and XAD-2 sorbent tubes | Diisobutyl phthalate content Range (0,10 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-63 issue 2 of 15.04.2025 | |
| 90 | Workplace environment - air samples collected on glass fibre filters and XAD-2 sorbent tubes | Polycyclic aromatic hydrocarbons (PAH) content anthracene (0,0100 – 10,0) µg in the sample benzo(a)anthracene (0,0050 – 10,0) µg in the sample chrysene (0,0100 – 20,0) µg in the sample benzo(b)fluoranthene (0,0100 – 20,0) µg in the sample benzo(k)fluoranthene (0,0050 – 10,0) µg in the sample benzo(a)pyrene (0,0200 – 40) µg in the sample benzo(g,h,i)perylene (0,040 – 80) µg in the sample indeno(1,2,3-c,d)pyrene (0,0200 – 40) µg in the sample dibenzo(a,h)anthracene (0,0400 – 80) µg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-5:2006 | |
| 91 | Workplace environment - air samples collected on glass fibre filters and XAD-2 sorbent tubes | Polycyclic aromatic hydrocarbons (anthracene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene, benzo(g,h,i)perylene, indeno(1,2,3-c,d)pyrene) as the sum of the products of concentrations and carcinogenicity factors of the 9 carcinogenic PAHs (calculated) | PN-Z-04240-5:2006 | ||
| 92 | Workplace environment - air samples collected on sorption tubes and/or into Tedlar bag containers, General environment - air and waste gas samples collected on sorption tubes and/or into bag containers, Tedlar | Identification with confirmation of the identity of organic compounds: glutaraldehyde, acrylaldehyde, formaldehyde, benzo[a]pyrene, methylenebis(phenyl isocyanate), methanol, acetone, ethyl acrylate, cyclohexanol, cyclohexanone, dimethoxymethane, ethanol, diethyl ether, methyl methacrylate, 3-methylbutan-1-ol, butan-1-ol, butan-2-one, cyclohexane, n-butyl acetate, ethyl acetate, vinyl acetate, cumene, styrene, benzene, ethylbenzene, xylene – mixture of isomers, toluene, trimethylbenzene - mixture of isomers, 2-methoxyethanol, 2-butoxyethyl acetate, 2-ethoxyethyl acetate, 2-methoxyethyl acetate, propan-1-ol, tetrahydrofuran, 2-(methoxymethylethoxy)propanol - mixture of isomers: 1-(2-methoxy-1-methylethoxy)propan-2-ol, 1-(2-methoxy-2-methylethoxy)propan-2-ol, 2-(2-methoxy-1-methylethoxy)propan-1-ol, 2-butoxyethanol, 2-ethoxyethanol, 2-methylpropan-1-ol, 4-hydroxy-4-methylpentan-2-one, 2-(2-butoxyethoxy)ethanol, 2-ethylhexan-1-ol, 1-methoxypropan-2-ol, 4-methylpentan-2-one, 2-methoxy-1-methylethyl acetate, acrylonitrile, 2-aminoethanol, phenol, hexano-6-lactam, cresol - mixture of isomers, 1-methyl-2-pyrrolidone, triethylamine, hexane, heptane, octane, naphtha, pentane, ethylene glycol, white spirit, extraction petrol, epoxyethane, butane, propane, 1-chloro-2,3-epoxypropane, chloroethene, chloroform, trichloroethene, dichloromethane, tetrachloroethene, naphthalene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(g,h,i)perylene, indeno(1,2,3-cd)pyrene, acenaphthene, acenaphthylene, dibenzo(a,h)anthracene, ethanethiol, tetrahydrothiophene, thiophene, benzenethiol | Gas chromatography with mass spectrometry detection (GC-MS) | PA-52 issue 5 of 02.05.2024 excluding cl. 3.7 | |
| 93 | Workplace environment - air samples collected on sorption tubes and/or into Tedlar bag containers, General environment - air and waste gas samples collected on sorption tubes and/or into Tedlar bag containers | Identification of organic compounds Spectral Library ver.2.0 g 2011 |
Qualitative method using gas chromatography with mass spectrometry detection (GC-MS) against the NIST/EPA/NIH Mass spectral library | PA-52 issue 5 of 02.05.2024 excluding cl. 3.7 | |
| 94 | General environment - waste gas samples collected into impingers with absorbing solution | Hydrogen chloride content Range (0,080 – 15,0) mg in the sample |
Spectrophotometric method | PN-EN 1911:2011 excluding cl. 5 | |
| 95 | General environment - waste gas samples collected into impingers with absorbing solution | Sulfur dioxide content Range (0,00320 – 0,064) mg in the sample |
Spectrophotometric method | PN-Z-04015-12:1996 + Ap1:2001 excluding cl. 7 | |
| 96 | General environment - waste gas samples collected into impingers with absorbing solution | Ozone content Range (0,00100 – 0,0100) mg in the sample |
Spectrophotometric method | PN-Z-04007-2:1994 excluding cl. 7 | |
| 97 | General environment - waste gas samples collected into impingers with absorbing solution | Hydrogen sulphide content Range (0,0200 – 0,160) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 excluding cl. 7 | |
| 98 | General environment - waste gas samples collected into impingers with absorbing solution | Phosphoric(V) acid content Range (0,00253– 0,126) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 excluding cl. 7 PA-59 issue 1 of 01.09.2022 | |
| 99 | General environment - waste gas samples collected into impingers with absorbing solution | Tetraphosphorus decaoxide content Range (0,00183 – 0,092) mg in the sample |
Spectrophotometric method | PN-Z-04073-1:2014-08 excluding cl. 7 | |
| 100 | General environment - waste gas samples collected into impingers with absorbing solution | Chlorine content Range (0,0010 – 0,0060) mg in the sample |
Spectrophotometric method | PA-60 issue 1 of 04.11.2024 | |
| 101 | General environment - waste gas samples collected on filters and/or into impingers with absorbing solution | Fluoride content calculated as F Range (0,0100 – 0,30) mg in the sample Content of the sum of hydrogen fluoride and solid fluorine compounds Range (0,0100 – 0,30) mg in the sample |
Spectrophotometric method | PN-82/Z-04093.03 excluding cl. 3 | |
| 102 | General environment - waste gas samples collected on filters and/or into impingers with absorbing solution | Content of chromium(VI) compounds expressed as Cr(VI) Range (0,00035 – 0,0070) mg in the sample |
Spectrophotometric method | PA-56 issue 3 of 01.10.2024 | |
| 103 | General environment - waste gas samples collected into impingers with absorbing solution | Hydrogen fluoride content Range (0,0100 – 100) mg in the sample |
Potentiometric method - ion-selective | ISO 15713:2006 excluding cl. 7 | |
| 104 | General environment - waste gas samples collected into impingers with absorbing solution, on filters, prepared filters | Hydrogen cyanide content Range (0,00030 – 0,0240) mg in the sample |
Spectrophotometric method | PN-70/Z-04053 excluding cl. 2.4 | |
| 105 | General environment - waste gas samples collected into impingers with absorbing solution, on filters, prepared filters | Ammonium chloride content Range (0,094 – 9,4) mg in the sample |
Spectrophotometric method | PN-Z-04265:2000 excluding cl. 7 | |
| 106 | General environment - waste gas samples collected into impingers with absorbing solution, on filters, prepared filters | Glutaraldehyde content Range (0,00040 – 0,060) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PA-27 issue 6 of 27.01.2020 | |
| 107 | General environment - waste gas samples collected on sorption tubes prepared with silica gel | Acrylaldehyde content Range (0,00040 – 0,040) mg in the sample Formaldehyde content Range (0,00040 – 0,060) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PA-27 issue 6 of 27.01.2020 | |
| 108 | General environment - waste gas samples collected on filters | Benzo[a]pyrene content Range (0,0000050 – 0,00400) mg in the sample Dibenzo[a,h]anthracene content Range (0,0000050 – 0,00400) mg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PA-27 issue 6 of 27.01.2020 | |
| 109 | General environment - waste gas samples collected into impingers with absorbing solution | Ammonia content Range (0,0057 – 3,54) mg in the sample |
Spectrophotometric method | PN-EN ISO 21877:2020-03 excluding cl. 6 and 8 | |
| 110 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Methylenebis(phenyl isocyanate) (4,4`-methylenediphenyl diisocyanate) content Range (0,00031 – 0,025) mg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PA-28 issue 6 of 27.01.2020 | |
| 111 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Tin content Range (0,0010 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 112 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Content of aluminium, aluminium trioxide calculated as aluminium Range (0,0025 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 113 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Barium content Range (0,00010 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 114 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Chromium content Range (0,00080 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 115 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Zinc content Range (0,00010 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 116 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Antimony content Range (0,0010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 117 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Arsenic content Range (0,0010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 118 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Cadmium content Range (0,00020 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 119 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Cobalt content Range (0,00050 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 120 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Manganese content Range (0,00010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 121 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Thallium content Range (0,0010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 122 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Vanadium content Range (0,0010 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 123 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Copper content Range (0,00050 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 124 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Nickel content Range (0,00050 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 125 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Lead content Range (0,00050 – 10,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4 | |
| 126 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Silver content Range (0,0010 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 127 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Magnesium oxide content Range (0,00010 – 83) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 128 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Calcium oxide content Range (0,00010 – 70) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 129 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Calcium carbonate content Range (0,00010 – 125) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 130 | General environment - waste gas samples collected on filters and into impingers with absorbing solution | Calcium hydroxide content Range (0,00010 – 92) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 131 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Iron content Range (0,00030 – 50,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PA-29 issue 18 of 30.01.2026 | |
| 132 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Mercury content Range (0,0000050 – 0,150) mg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 +Ap1:2016-07 | PN-EN 13211+AC:2006 excluding cl. 7.1 to 7.7 | |
| 133 | General environment - waste gas samples collected on filters, into impingers with absorbing solution | Mercury content Range (0,0000050 – 0,150) mg in the sample |
Atomic absorption spectrometry with amalgamation technique (CVAAS) | PN-EN ISO 12846:2012 +Ap1:2016-07 | PN-EN 13211+AC:2006 excluding cl. 7.1 to 7.7 | |
| 134 | General environment - waste gas samples collected on activated carbon sorbent tubes | Content of organic compounds methanol (0,0100 – 3,00) mg in the sample propan-2-ol (0,0050 – 19,0) mg in the sample acetone (0,0050 – 19,0) mg in the sample ethyl acrylate (0,010 – 18,9) mg in the sample cyclohexanol (0,010 – 18,4) mg in the sample cyclohexanone (0,010 – 19,0) mg in the sample dimethoxymethane (0,020 – 19,0) mg in the sample ethanol (0,010 – 15,0) mg in the sample diethyl ether (0,010 – 19,0) mg in the sample methyl methacrylate (0,010 – 19,0) mg in the sample 3-methylbutan-1-ol (0,010 – 19,7) mg in the sample butan-1-ol (0,011 – 19,0) mg in the sample butan-2-one (0,011 – 19,0) mg in the sample cyclohexane (0,010 – 19,0) mg in the sample butyl acetate (0,010 – 19,0) mg in the sample ethyl acetate (0,010 – 19,0) mg in the sample vinyl acetate (0,010 – 18,3) mg in the sample methyl acetate (0,50 - 15,0) mg in the sample acetonitrile (0,150 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 135 | General environment - waste gas samples collected on activated carbon sorbent tubes | Aromatic hydrocarbon content cumene (0,0020 – 19,0) mg in the sample styrene (0,0022 – 19,0) mg in the sample benzene (0,0020 – 10,0) mg in the sample ethylbenzene (0,0020 – 19,0) mg in the sample xylene - mixture of isomers (0,0060 – 19,0) mg in the sample toluene (0,0020 – 19,0) mg in the sample trimethylbenzene - mixture of isomers (0,0021 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-Z-04016-7:1999 excluding cl. 8 | |
| 136 | General environment - waste gas samples collected on activated carbon sorbent tubes | Sum of aromatic hydrocarbons (calculated) | PN-Z-04016-7:1999 excluding cl. 8 | ||
| 137 | General environment - waste gas samples collected on activated carbon sorbent tubes | Content of organic compounds 2-methoxyethanol (0,0060 – 15,0) mg in the sample 1-methoxypropan-2-ol (0,0060 – 15,0) mg in the sample 2-butoxyethyl acetate (0,0050 – 15,0) mg in the sample 2-ethoxyethyl acetate (0,0060 – 15,0) mg in the sample 2-methoxyethyl acetate (0,0050 – 15,0) mg in the sample 2-methoxy-1-methylethyl acetate (0,0060 – 15,0) mg in the sample propan-1-ol (0,0050 – 15,0) mg in the sample tetrahydrofuran (0,0060 – 19,0) mg in the sample (2-methoxymethylethoxy)propanol (0,0050 – 15,0) mg in the sample 2-butoxyethanol (0,0050 – 15,0) mg in the sample 2-ethoxyethanol (0,0050 – 15,0) mg in the sample 4-methylpentan-2-one (0,0050 – 19,0) mg in the sample 2-methylpropan-1-ol (0,0050 – 15,0) mg in the sample 4-hydroxy-4-methylpentan-2-one (0,0100 – 15,0) mg in the sample 2-(2-butoxyethoxy)ethanol (0,0100 – 15,0) mg in the sample 2-ethylhexan-1-ol (0,0100 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 138 | General environment - waste gas samples collected on silica gel sorbent tubes | Content of organic compounds 2-aminoethanol (0,010 – 15,0) mg in the sample phenol (0,0075 – 7,50) mg in the sample caprolactam (hexano-6-lactam) (0,010 – 15,0) mg in the sample cresol – mixture of isomers (0,0075 – 7,50) mg in the sample triethylamine (0,010 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-17 issue 9 of 27.01.2020 | |
| 139 | General environment - waste gas samples collected on silica gel sorbent tubes | Naphthalene content Range (0,050 – 1,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04098-3:2005 excluding cl. 8 | |
| 140 | General environment - waste gas samples collected on activated carbon sorbent tubes | Aliphatic hydrocarbon content decane (0,011 – 19,0) mg in the sample dodecane (0,011 – 19,0) mg in the sample hexane (0,011 – 19,0) mg in the sample heptane (0,010 – 19,0) mg in the sample nonane (0,011 – 19,0) mg in the sample octane (0,011 – 19,0) mg in the sample pentane (0,011 – 19,0) mg in the sample tridecane (0,011 – 19,0) mg in the sample undecane (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-18 issue 6 of 27.01.2020 | |
| 141 | General environment - waste gas samples collected on activated carbon sorbent tubes | Sum of aliphatic hydrocarbons (calculated) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-18 issue 6 of 27.01.2020 | ||
| 142 | General environment - waste gas samples collected on activated carbon sorbent tubes | Kerosene content Range (0,033 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-18 issue 6 of 27.01.2020 | |
| 143 | General environment - waste gas samples collected on activated carbon sorbent tubes | Ethylene glycol content Range (0,030 – 15,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-19 issue 6 of 27.01.2020 | |
| 144 | General environment - waste gas samples collected on activated carbon sorbent tubes | White spirit content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-20 issue 6 of 27.01.2020 | |
| 145 | General environment - waste gas samples collected on activated carbon sorbent tubes | Extraction naphtha content Range (0,011 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-21 issue 6 of 27.01.2020 | |
| 146 | General environment - waste gas samples collected on activated carbon sorbent tubes | Ethylene oxide content Range (0,0020 – 2,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-22 issue 7 of 24.01.2025 | |
| 147 | General environment - waste gas samples collected on activated carbon sorbent tubes | Content of chemical compounds 1-chloro-2,3-epoxypropane (0,0050 – 10,0) mg in the sample Chloroethene - vinyl chloride (0,0050 – 2,00) mg in the sample Chloroform (0,020 – 19,0) mg in the sample Trichloroethene (0,020 – 19,0) mg in the sample Dichloromethane (0,020 – 19,0) mg in the sample Tetrachloroethene (0,020 – 19,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PN-EN 13649:2005 excluding cl. 5 and 6 PA-31 issue 7 of 24.01.2025 | |
| 148 | General environment - waste gas samples collected on activated carbon sorbent tubes | 2-methoxypropyl acetate content Range (0,030 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-14 issue 11 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 149 | General environment - waste gas samples collected on activated carbon sorbent tubes | 2-methoxypropan-1-ol content Range (0,030 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-16 issue 10 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 150 | General environment - waste gas samples collected on activated carbon sorbent tubes | 1-methyl-2-pyrrolidone content Range (0,015 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 151 | General environment - waste gas samples collected on activated carbon sorbent tubes | 1-ethyl-2-pyrrolidone content Range (0,020 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 152 | General environment - waste gas samples collected on activated carbon sorbent tubes | 1,2-dimethoxyethane content Range (0,015 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-61 issue 2 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 153 | General environment - waste gas samples collected on activated carbon sorbent tubes | Acrylonitrile content Range (0,0050 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-62 issue 2 of 15.04.2025 | PN-EN 13649:2005 excluding cl. 5 and 6 | |
| 154 | General environment - waste gas samples collected into Tedlar bag containers | Butane and propane concentration Butane (12,7 – 5320) mg/m3 Propane (9,7 – 3960) mg/m3 |
Gas chromatography with flame ionization detection (GC–FID) | PA-23 issue 5 of 27.01.2020 | |
| 155 | General environment - waste gas samples collected on sorption tubes with silica gel | Mercaptan content ethanethiol (0,00250 – 10,0) mg in the sample tetrahydrothiophene (0,00250 – 10,0) mg in the sample thiophene (0,00250 – 10,0) mg in the sample benzenethiol (0,0500 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-17 issue 9 of 27.01.2020 | |
| 156 | General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes | Dibutyl phthalate content Range (0,020 – 10,00) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-63 issue 2 of 15.04.2025 | |
| 157 | General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes | Diisobutyl phthalate content Range (0,10 – 10,0) mg in the sample |
Gas chromatography with flame ionization detection (GC–FID) | PA-63 issue 2 of 15.04.2025 | |
| 158 | General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes | Polycyclic aromatic hydrocarbons (PAH) content anthracene (0,0100 – 10,0) µg in the sample benzo(a)anthracene (0,0050 – 10,0) µg in the sample chrysene (0,0100 – 20,0) µg in the sample benzo(b)fluoranthene (0,0100 – 20,0) µg in the sample benzo(k)fluoranthene (0,0050 – 10,0) µg in the sample benzo(a)pyrene (0,0200 – 40) µg in the sample benzo(g,h,i)perylene (0,0400 – 80) µg in the sample indeno(1,2,3-cd)pyrene (0,0200 – 40) µg in the sample dibenzo(a,h)anthracene (0,0400 – 80) µg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PA-34 issue 5 of 22.03.2023 | |
| 159 | General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes | Polycyclic aromatic hydrocarbons (PAH) content fluorene (0,80 – 20,0) µg in the sample phenanthrene (0,40 – 40) µg in the sample fluoranthene (0,80 – 80) µg in the sample pyrene (0,40 – 20,0) µg in the sample acenaphthene (4,0 – 100) µg in the sample acenaphthylene (8,0 – 800) µg in the sample |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PA-34 issue 5 of 22.03.2023 | |
| 160 | General environment - waste gas samples collected on glass fibre filters and XAD-2 sorbent tubes | Sum of polycyclic aromatic hydrocarbons (PAH) (calculated) | PA-34 issue 5 of 22.03.2023 | ||
| 161 | Water, wastewater | Total suspended solids (TSS) Range (2,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 162 | Water, wastewater | pH Range 4,00 – 10,00 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 163 | Water, wastewater | Fluoride concentration Range (0,200 – 30,0) mg/l |
Potentiometric method | PA-10 issue 9 of 01.10.2025 | |
| 164 | Water, wastewater | Cyanide concentration Range (0,010 – 8,0) mg/l |
Spectrophotometric method | PA-11 issue 3 of 27.01.2020 | |
| 165 | Water, wastewater | Ammonium nitrogen concentration Range (0,050 – 250) mg/l |
Spectrophotometric method | PA-09 issue 3 of 27.01.2020 | based on the HACH test, method 10023 | |
| 166 | Water, wastewater | Ammonium ion (ammonia) concentration (calculated) | PA-09 issue 3 of 27.01.2020 | based on the HACH test, method 10023 | ||
| 167 | Water, wastewater | Total organic carbon (TOC) concentration Range (5,0 – 2000) mg/l |
Spectrophotometric method | PA-12 issue 4 of 27.01.2020 | based on the HACH test, method 10129 | |
| 168 | Water, wastewater | Nitrate concentration Range (0,443 – 221) mg/l Nitrate nitrogen concentration Range (0,100 – 50,0) mg/l |
Spectrophotometric method | PN-82/C-04576.08 | |
| 169 | Water, wastewater | Nitrite nitrogen concentration Range (0,025 – 10,0) mg/l Nitrite concentration Range (0,082 – 32,9) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 170 | Water, wastewater | Total nitrogen concentration Range (1,00 – 220) mg/l |
Spectrophotometric method | PA-44 issue 3 of 27.01.2020 | based on the NANOCOLOR test, method 0-83 | |
| 171 | Water, wastewater | Chloride concentration Range (10,0 – 1000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 172 | Water, wastewater | Chemical oxygen demand COD-Cr Range (30,0 – 5000) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 173 | Water, wastewater | Sulfate concentration Range (10,0 – 1000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 174 | Water, wastewater | Metal concentrations arsenic (0,0050 – 1,00) mg/l tin (0,020 – 500) mg/l total phosphorus (0,050 – 500) mg/l zinc (0,0020 – 500) mg/l cobalt (0,0100 – 500) mg/l cadmium (0,0030 – 500) mg/l nickel (0,0100 – 500) mg/l copper (0,0100 – 500) mg/l lead (0,0100 – 500) mg/l boron (0,0050 – 500) mg/l barium (0,0100 – 500) mg/l chromium (0,0080 – 500) mg/l manganese (0,0020 – 500) mg/l magnesium (0,0100 – 500) mg/l strontium (0,0020 – 500) mg/l sodium (1,00 – 1000) mg/l potassium (1,00 – 1000) mg/l calcium (0,0100 – 500) mg/l iron (0,0100 – 500) mg/l selenium (0,0050 – 1,00) mg/l silver (0,0050 – 500) mg/l aluminium (0,050 – 500) mg/l molybdenum (0,0100 – 500) mg/l |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 175 | Water, wastewater | Total hardness (calculated) | PA-29 issue 18 of 30.01.2026 | ||
| 176 | Water, wastewater | Mercury concentration Range (0,000100 – 0,150) mg/l |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 + Ap1:2016-07 | |
| 177 | Water, wastewater | Mercury concentration Range (0,000100 – 0,150) mg/l |
Atomic absorption spectrometry with amalgamation technique (CVAAS) | PN-EN ISO 12846:2012 + Ap1:2016-07 | |
| 178 | Water, wastewater | Concentration of total gasoline (C6-C12 hydrocarbons) Range (0,0086 – 86) mg/l Mineral oil concentration (hydrocarbons C12-C35) Range (0,0074 – 74) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PA-24 issue 7 of 05.01.2026 | |
| 179 | Water, wastewater | Mineral oil index Range (0,0100 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 180 | Water, wastewater | Concentration of organic compounds benzene (0,0010 – 1,00) mg/l toluene (0,0010 – 1,00) mg/l (m+p)-xylene (0,0010 – 1,00) mg/l o-xylene (0,0010 – 1,00) mg/l styrene (0,0010 – 1,00) mg/l ethylbenzene (0,0010 – 1,00) mg/l |
Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) | PN-ISO 11423-1:2002 | |
| 181 | Water, wastewater | Concentration of polycyclic aromatic hydrocarbons (PAH) anthracene (0,100 – 100) µg/l benzo(b)fluoranthene (0,0200 – 400) µg/l benzo(k)fluoranthene (0,0100 – 200) µg/l indeno(1,2,3-cd)pyrene (0,0200 – 400) µg/l benzo(a) pyrene (0,0100 – 200) µg/l benzo(g, h, i) perylene (0,0200 – 400) µg/l dibenzo(a, h) anthracene (0,0200 – 400) µg/l |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-EN ISO 17993:2005 | |
| 182 | Water, wastewater | Sum of polycyclic aromatic hydrocarbons PAH: benzo(b)fluoranthene, benzo(k)fluoranthene, indeno(1,2,3-cd)pyrene, benzo(a) pyrene, benzo(g, h, i) perylene, dibenzo(a, h) anthracene (calculated) | PN-EN ISO 17993:2005 | ||
| 183 | Groundwater | Sampling for chemical and physical testing | PN-ISO 5667-11:2004 | ||
| 184 | Wastewater | Sampling for chemical and physical testing | Manual method | PN-ISO 5667-10:1997 | |
| 185 | Soils, ground | Metal content arsenic (5,00 – 5000) mg/kg zinc (1,00 – 5000) mg/kg cobalt (1,00 – 5000) mg/kg cadmium (1,00 – 5000) mg/kg nickel (1,00 – 5000) mg/kg chromium (1,00 – 5000) mg/kg copper (1,00 – 5000) mg/kg lead (5,00 – 5000) mg/kg manganese (1,00 – 5000) mg/kg barium (1,00 – 5000) mg/kg calcium (1,00 – 5000) mg/kg magnesium (1,00 – 5000) mg/kg iron (1,00 – 5000) mg/kg strontium (1,00 – 5000) mg/kg tin (1,00 – 5000) mg/kg molybdenum (1,00 – 5000) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-ISO 11466:2002 | PN-EN ISO 11885:2009 | |
| 186 | Soils, ground | Mercury content Range (0,100 – 60,0) mg/kg |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-ISO 16772:2009 | |
| 187 | Soils, ground | pH – in KCl Range (4,0 – 10,0) |
Potentiometric method | PN-EN ISO 10390:2022-09 | |
| 188 | Soils, ground | Content of the sum of petrols (hydrocarbons C6-C12) Range (1,00 – 750) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PA-24 issue 7 of 05.01.2026 | |
| 189 | Soils, ground | Mineral oil content (C12-C35 hydrocarbons) Range (30 – 3000) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 190 | Soils, ground | Sampling for chemical and physical testing | PN-ISO 10381-4:2007 excluding cl. 8 | PN-ISO 10381-5:2009 | ||
| 191 | Soils, ground | Polycyclic aromatic hydrocarbons (PAH) content naphthalene (0,20 – 40) mg/kg anthracene (0,20 – 20) mg/kg benzo(a)anthracene (0,20 – 20) mg/kg chrysene (0,20 – 40) mg/kg benzo(b)fluoranthene (0,20 – 40) mg/kg benzo(k)fluoranthene (0,20 – 20) mg/kg benzo(a)pyrene (0,10 – 40) mg/kg benzo(g,h,i)perylene (0,20 – 40) mg/kg indeno (1,2,3-cd)pyrene Range (0,20 – 40) mg/kg dibenzo(a,h)anthracene (0,10 – 40) mg/kg |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-EN 17503:2022-07 | |
| 192 | Soils, ground | Polycyclic aromatic hydrocarbons (PAH) content fluorene (0,40 – 40) mg/kg phenanthrene (0,20 – 40) mg/kg fluoranthene (0,40 – 40) mg/kg pyrene (0,20 – 40) mg/kg acenaphthene (2,0 – 40) mg/kg acenaphthylene (4,0 – 40) mg/kg |
High-performance liquid chromatography with diode array detection (HPLC-DAD) | PN-EN 17503:2022-07 | |
| 193 | Soils, ground | Sum of polycyclic aromatic hydrocarbons PAH (calculated) | PN-EN 17503:2022-07 | ||
| 194 | Soils, ground | Aromatic hydrocarbon content benzene (0,10 – 150) mg/kg ethylbenzene (0,10 – 200) mg/kg toluene (0,10 – 200) mg/kg (m+p)-xylene (0,10 – 150) mg/kg o-xylene (0,10 – 150) mg/kg styrene (0,10 – 100) mg/kg |
Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) | PN-EN ISO 22155:2016-07 | |
| 195 | Soils, ground | Sum of aromatic hydrocarbons (calculated) | PN-EN ISO 22155:2016-07 | ||
| 196 | Soils, ground | Content of organic compounds phenol (0,100– 100) mg/kg pyridine (0,100 – 100) mg/kg |
Gas chromatography with mass spectrometry detection (GC-MS) | PA-51 issue 4 of 05.01.2026 | |
| 197 | Soils, ground | Dry matter / water content Range (0,3 – 99,7) % |
Gravimetric method | PN-ISO 11465:1999 | |
Reference standards (144)
ISO 15713:2006 excluding cl. 7
NIOSH No. 7600 Issue 3 PA-56 issue 3 of 01.10.2024
PA-09 issue 3 of 27.01.2020
PA-10 issue 9 of 01.10.2025
PA-11 issue 3 of 27.01.2020
PA-12 issue 4 of 27.01.2020
PA-13 issue 9 of 01.12.2025
PA-14 issue 11 of 15.04.2025
PA-15 issue 6 of 27.01.2020 excluding cl. 3.8
PA-16 issue 10 of 15.04.2025
PA-17 issue 9 of 27.01.2020
PA-17 issue 9 of 27.01.2020 excluding cl. 3.8
PA-18 issue 6 of 27.01.2020 excluding cl. 3.8
PA-23 issue 5 of 27.01.2020
PA-23 issue 5 of 27.01.2020 excluding cl. 3.8
PA-24 issue 7 of 05.01.2026
PA-27 issue 6 of 27.01.2020
PA-28 issue 6 of 27.01.2020
PA-28 issue 6 of 27.01.2020 excluding cl. 3.8
PA-29 issue 18 of 30.01.2026
PA-29 issue 18 of 30.01.2026 excluding cl. 3.6
PA-30 issue 6 of 27.01.2020 excluding cl. 3.6
PA-34 issue 5 of 22.03.2023
PA-44 issue 3 of 27.01.2020
PA-51 issue 4 of 05.01.2026
PA-52 issue 5 of 02.05.2024 excluding cl. 3.7
PA-56 issue 3 of 01.10.2024
PA-57 issue 3 of 23.07.2021 excluding cl. 3.6
PA-60 issue 1 of 04.11.2024
PA-61 issue 2 of 15.04.2025
PA-62 issue 2 of 15.04.2025
PA-63 issue 2 of 15.04.2025
PN-70/Z-04053
PN-70/Z-04053 excluding cl. 2.4
PN-71/Z-04041
PN-75/Z-04037/03 PA-60 issue 1 of 04.11.2024
PN-82/C-04576.08
PN-82/Z-04093.03
PN-82/Z-04093.03 excluding cl. 3
PN-87/Z-04100/03 cl. 7
PN-88/Z-04202/02
PN-93/Z-04225/03 PA-02 issue 6 of 04.11.2024
PN-EN 13211+AC:2006 excluding cl. 7.1 to 7.7
PN-EN 13649:2005 excluding cl. 5 and 6
PN-EN 13649:2005 excluding cl. 5 and 6 PA-18 issue 6 of 27.01.2020
PN-EN 13649:2005 excluding cl. 5 and 6 PA-19 issue 6 of 27.01.2020
PN-EN 13649:2005 excluding cl. 5 and 6 PA-20 issue 6 of 27.01.2020
PN-EN 13649:2005 excluding cl. 5 and 6 PA-21 issue 6 of 27.01.2020
PN-EN 13649:2005 excluding cl. 5 and 6 PA-22 issue 7 of 24.01.2025
PN-EN 13649:2005 excluding cl. 5 and 6 PA-31 issue 7 of 24.01.2025
PN-EN 14255-1:2010
PN-EN 14255-2:2010
PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4
PN-EN 14385:2025-05 excluding cl. 5.1.2, 6, 7, 8.3 and 8.4
PN-EN 17503:2022-07
PN-EN 1911:2011 excluding cl. 5
PN-EN 26777:1999
PN-EN 872:2007+Ap1:2007
PN-EN ISO 10390:2022-09
PN-EN ISO 10523:2012
PN-EN ISO 11885:2009
PN-EN ISO 12846:2012 + Ap1:2016-07
PN-EN ISO 12846:2012 +Ap1:2016-07
PN-EN ISO 16703:2011
PN-EN ISO 17993:2005
PN-EN ISO 21877:2020-03 excluding cl. 6 and 8
PN-EN ISO 22155:2016-07
PN-EN ISO 9377-2:2003
PN-ISO 10381-4:2007 excluding cl. 8
PN-ISO 10381-5:2009
PN-ISO 11423-1:2002
PN-ISO 11465:1999
PN-ISO 11466:2002
PN-ISO 15705:2005
PN-ISO 16772:2009
PN-ISO 5667-10:1997
PN-ISO 5667-11:2004
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-Z-04007-2:1994
PN-Z-04007-2:1994 excluding cl. 7
PN-Z-04009-11:2008
PN-Z-04015-12:1996 + Ap1:2001
PN-Z-04015-12:1996 + Ap1:2001 excluding cl. 7
PN-Z-04015-13:1996
PN-Z-04015-13:1996 excluding cl. 7
PN-Z-04016-10:2005
PN-Z-04016-7:1999 excluding cl. 8
PN-Z-04024-3:2012 cl. 6 + Ap1:2013
PN-Z-04029-01:1981 cl. 8 PA-31 issue 7 of 24.01.2025
PN-Z-04045-16:2010
PN-Z-04047-02:1978 cl. 2.2.7 PA-31 issue 7 of 24.01.2025
PN-Z-04073-1:2014-08
PN-Z-04073-1:2014-08 PA-59 issue 1 of 01.09.2022 excluding cl. 3.8
PN-Z-04073-1:2014-08 excluding cl. 7
PN-Z-04073-1:2014-08 excluding cl. 7 PA-59 issue 1 of 01.09.2022
PN-Z-04098-3:2005
PN-Z-04098-3:2005 excluding cl. 8
PN-Z-04102-3:2013-10 cl. 6
PN-Z-04106-3:2002 cl. 7
PN-Z-04108-5:2006
PN-Z-04112-01:1978 cl. 8 PA-31 issue 7 of 24.01.2025
PN-Z-04118-01-1978 cl. 2.2.7 PA-31 issue 7 of 24.01.2025
PN-Z-04119-10:2008 + Ap1:2011
PN-Z-04134-02:1981 cl. 8 PA-21 issue 6 of 27.01.2020 excluding cl. 3.8
PN-Z-04134-03:1981 cl. 8 PA-20 issue 6 of 27.01.2020 excluding cl. 3.8
PN-Z-04136-3:2003
PN-Z-04136-3:2003 cl. 8 PA-18 issue 6 of 27.01.2020 excluding cl. 3.8
PN-Z-04187-02:1988 cl. 7 PA-31 issue 7 of 24.01.2025
PN-Z-04203-02:1988 cl. 8 PA-19 issue 6 of 27.01.2020 excluding cl. 3.8
PN-Z-04216-2:2012 cl. 6
PN-Z-04227-02:1992 cl. 8 PA-18 issue 6 of 27.01.2020 excluding cl. 3.8
PN-Z-04240-2:1999
PN-Z-04240-4:1999
PN-Z-04240-5:2006
PN-Z-04263-1:2012 cl. 6
PN-Z-04265:2000
PN-Z-04265:2000 excluding cl. 7
PN-Z-04290:2002
PN-Z-04291:2003 cl. 7
PN-Z-04294:2001 cl. 7
PN-Z-04300:2002 cl. 8 PA-22 issue 7 of 24.01.2025
PN-Z-04305:2003 cl. 8 PA-14 issue 11 of 15.04.2025
PN-Z-04354:2005
PN-Z-04372:2009
PN-Z-04434:2011 cl. 6
PN-Z-04435:2011 cl. 6
PN-Z-04436:2011 cl. 6
PN-Z-04437:2011 cl. 6 PA-31 issue 7 of 24.01.2025
PN-Z-04442:2023-05 cl. 7
PN-Z-04469:2025-02 cl. 8
PN-Z-04470:2015-10 cl. 7
PN-Z-04472:2015-10 cl. 7 + Ap1:2015-12
PN-Z-04487:2017-10 cl. 7
PN-Z-04488:2017-10 cl. 7
PN-Z-04489:2017-10 cl. 7
PN-Z-04497:2018-09 cl. 7
PN-Z-04502:2019-10 cl. 7
PN-Z-04503:2019-10 cl. 7
Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100
Principles and Methods of Assessing the Working Environment 2012, issue 4(74), pp. 117-130
based on the HACH test, method 10023
based on the HACH test, method 10129
based on the NANOCOLOR test, method 0-83