🇵🇱 UNIWERSYTET MORSKI W GDYNI PL
Water & wastewaterEnvironmentConstructionPetrochemistry & fuelsMaterials & polymers
UNIWERSYTET MORSKI W GDYNI is a laboratory accredited by PCA under number AB 646 (Gdynia, Poland). Its accreditation scope covers 138 test methods in the following areas: Water & wastewater, Environment, Construction, Petrochemistry & fuels. Test objects include: Water, Water intended for human consumption, Wastewater, WasteDAB-11: Mineral sludges and waste (I), Construction waste (III…, Water, Water intended for human consumption, Wastewater, Rainwater…, Water, Wastewater. Most frequently used techniques: Spectrophotometric method, Gas chromatography with mass spectrometry detection (GC-MS), Titrimetric method.
At a glance
- Accreditation number: PCA AB 646
- Methods in scope: 138
- Types of test objects: 34
- Techniques used: 23
- City: Gdynia, Poland
- Accreditation number
- AB 646
- Accreditation body
- PCA
- Address
- INSTYTUT MORSKI, ul. Morska 81-87, 81-225 Gdynia, LABORATORIUM ZAKŁADU OCHRONY ŚRODOWISKA, ul. Trzy Lipy 3
- City
- Gdynia, Poland
What this laboratory tests (34)
- Water, Water intended for human consumption, Wastewater — 23 methods
- WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 — 11 methods
- Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water — 11 methods
- Water, Wastewater — 10 methods
- Water, Water intended for human consumption — 10 methods
- Seawater — 9 methods
- Wastewater — 9 methods
- Water — 7 methods
- Ground, Bottom sediments, Sewage sludge — 6 methods
- Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 — 5 methods
- Fish — 3 methods
- Ground, Bottom sediments — 3 methods
- WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII); Slags, ashes and furnace dusts (XI); WasteO) code: 10 01 05, 19 09 05, 19 09 99 — 3 methods
- Water intended for human consumption — 3 methods
- Plant material — 2 methods
- and 19 more
Analytical techniques used (23)
- Spectrophotometric method — 23 methods
- Gas chromatography with mass spectrometry detection (GC-MS) — 11 methods
- Titrimetric method — 10 methods
- Gravimetric method — 8 methods
- Atomic absorption spectrometry with amalgamation technique — 6 methods
- Inductively coupled plasma mass spectrometry (ICP-MS) — 6 methods
- Potentiometric method — 6 methods
- High-temperature combustion with IR detection — 5 methods
- Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) — 4 methods
- Inductively coupled plasma optical emission spectrometry (ICP-OES) — 4 methods
- Ion chromatography with conductometric detection (IC-CD) — 4 methods
- Gas chromatography with flame ionization detection (GC-FID) — 3 methods
- Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) — 3 methods
- Optical method — 3 methods
- Conductometric method — 2 methods
- and 8 more
Laboratory locations
- UNIWERSYTET MORSKI W GDYNI (main site) — ul. Morska 81-87, 81-225 Gdynia
- ENVIRONMENTAL PROTECTION PLANT LABORATORY — ul. Trzy Lipy 3, 80-172 Gdańsk
Certificate information
- Issue date
- 29.06.2026
- Issue no.
- 26
Accreditation scope — test methods (138)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Environmental Protection Plant Laboratory | |||||
| 1 | Groundwater | Sampling for chemical and physical testing Temperature Range (0 – 50)°C |
I-25 issue 2 of 26.02.2024 | I-29 issue 2 of 26.02.2024 | ||
| 2 | Wastewater, Rainwater and snowmelt water | Sampling for physical and chemical testing Temperature Range (-4 – 50) °C |
Manual method | PN-ISO 5667-10:2021-11 | I-29 issue 2 of 26.02.2024 | |
| 3 | Water intended for human consumption | Sampling for physical and chemical tests, Temperature Range (0 – 50) oC |
PN-ISO 5667-5:2017-10 | I-29 issue 2 of 26.02.2024 | ||
| 4 | Surface water | Sampling for physical and chemical tests, Temperature Range (0 – 35) °C |
PN-ISO 5667-6:2016-12 | PN-ISO 5667-4:2017-10 | I-29 issue 2 of 26.02.2024 | ||
| 5 | Seawater | Sampling for physical and chemical tests, Temperature Range (-4 – 35) °C |
PN-ISO 5667-9:2005 | I-29 issue 2 of 26.02.2024 | ||
| 6 | Sewage sludge | Sampling for physical and chemical testing | PN-EN ISO 5667-13:2011 excluding cl. 6.3.3; 6.3.4; 6.3.5; 6.3.7; 6.3.8.5 | ||
| 7 | Soil, Grounds | Sampling for physical and chemical testing | PN-R-04031:1997 | PN-ISO 10381-4:2007-01 | PN-ISO 10381-5:2009 | ||
| 8 | Bottom sediments | Sampling for physical and chemical testing | PN-EN ISO 5667-19:2006 | ||
| 9 | Seawater | Total nitrogen concentration Range (5,0 – 60) μmol/dm3 |
Spectrophotometric method | PB–27 issue 5 of 22.02.2024 | |
| 10 | Seawater | Ammonium nitrogen concentration Range (0,20 – 15) μmol/dm3 |
Spectrophotometric method | PB–30 issue 6 of 22.02.2024 | |
| 11 | Seawater | Nitrate nitrogen concentration Range (0,20 – 15) μmol/dm3 |
Spectrophotometric method | PB–28 issue 7 of 22.02.2024 | |
| 12 | Seawater | Nitrite nitrogen concentration Range (0,20 – 3,0) μmol/dm3 |
Spectrophotometric method | PB–29 issue 7 of 22.02.2024 | |
| 13 | Seawater | Mineral nitrogen (DIN) concentration (calculated) | I-16 issue 3 of 26.02.2024 | ||
| 14 | Seawater | Total phosphorus concentration Range (0,30 – 10) μmol/dm3 |
Spectrophotometric method | PB–31 issue 7 of 22.02.2024 | |
| 15 | Seawater | Phosphate concentration Range (0,30 – 10) μmol/dm3 |
Spectrophotometric method | PB–32 issue 7 of 22.02.2024 | |
| 16 | Surface water | Transparency (Secchi disc visibility) Range (0,1 – 10) m |
Direct measurement method | PN-EN ISO 7027-2:2019-04 cl. 5.2 | |
| 17 | Seawater, Water intended for human consumption | Free chlorine concentration Range (0,02 – 2,00) mg/dm3 |
Spectrophotometric method | PB – 49 issue 1 of 15.01.2025 based on HACH test 8021 | |
| 18 | Water, Water intended for human consumption, Wastewater | Ammonium nitrogen concentration Range (0,010 –100) mg/dm3 |
Spectrophotometric method | PB-06 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14752 | |
| 19 | Water, Water intended for human consumption, Wastewater | Kjeldahl nitrogen concentration Range (0,50 – 1000) mg/dm3 |
Titrimetric method | PN-EN 25663:2001 excluding cl. 5.8 | I-19 issue 3 of 26.02.2024 | |
| 20 | Water, Water intended for human consumption, Wastewater | Kjeldahl nitrogen concentration (calculated) | I-18 issue 3 of 26.02.2024 | ||
| 21 | Water, Water intended for human consumption, Wastewater | Total nitrogen concentration Range (0,50 – 1000) mg/dm3 |
Chemiluminescence method | PN-EN ISO 20236:2025-05 | |
| 22 | Water, Water intended for human consumption, Wastewater | Total nitrogen concentration (calculated) | I-20 issue 3 of 26.02.2024 | ||
| 23 | Water, Water intended for human consumption, Wastewater | Phenol concentration (phenol index) Range (0,0010 – 0,10) mg/dm3 |
Spectrophotometric method | PN-ISO 6439:1994 Method B | |
| 24 | Water, Water intended for human consumption, Wastewater | pH Range 2,0 – 12,5 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 25 | Water, Water intended for human consumption, Wastewater | Anion concentrations Fluorides (0,05 − 100 ) mg/dm3 Nitrites (0,10 − 50) mg/dm3 Bromides (0,10 − 50) mg/dm3 Phosphates (0,20 − 100) mg/dm3 Chlorides (0,10 – 10 000) mg/dm3 Sulfates (0,10 − 10 000) mg/dm3 |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 26 | Water, Water intended for human consumption, Wastewater | Total hardness (calculated) | I-11 issue 3 of 26.02.2024 | ||
| 27 | Water, Water intended for human consumption, Wastewater | Carbonate hardness (calculated) | I-11 issue 3 of 26.02.2024 | ||
| 28 | Water, Water intended for human consumption, Wastewater | Non-carbonate hardness (calculated) | I-11 issue 3 of 26.02.2024 | ||
| 29 | Water, Water intended for human consumption, Wastewater | Magnesium hardness (calculated) | I-11 issue 3 of 26.02.2024 | ||
| 30 | Water, Water intended for human consumption, Wastewater | Calcium hardness (calculated) | I-11 issue 3 of 26.02.2024 | ||
| 31 | Water, Water intended for human consumption, Wastewater | Polychlorinated biphenyls (PCB) concentration PCB 28 (1 – 1000) ng/dm3 PCB 52 (1 – 1000) ng/dm3 PCB 101 (1 – 1000) ng/dm3 PCB 118 (1 – 1000) ng/dm3 PCB 138 (1 – 1000) ng/dm3 PCB 153 (1 – 1000) ng/dm3 PCB 180 (1 – 1000) ng/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-02 issue 6 of 22.02.2024 | |
| 32 | Water, Water intended for human consumption, Wastewater | Sum of polychlorinated biphenyls (PCB) (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 33 | Water, Water intended for human consumption, Wastewater | Chemical oxygen demand COD-Cr Range (10 – 700) mg/dm3 O2 |
Titrimetric method | PB-19 issue 5 of 22.02.2024 | |
| 34 | Water, Water intended for human consumption, Wastewater | Chemical oxygen demand COD-Cr Range (10 – 5000) mg/dm3 O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 35 | Wastewater | Sum of chlorides and sulphates (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 36 | Wastewater | Adsorbable organic halogen compounds (AOX) concentration Range (0,5 - 1000) mg/dm3 Cl |
Spectrophotometric method | PB-35 issue 5 of 22.02.2024 | |
| 37 | Wastewater | Nitrates (0,10 − 500) mg/dm3 | Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 38 | Water, Water intended for human consumption, Wastewater | Arsenic concentration Range (0,001 – 0,050) mg/dm3 |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB- 25 issue 5 of 22.02.2024 | |
| 39 | Water, Water intended for human consumption, Wastewater | Antimony concentration Range (0,001 – 0,050) mg/dm3 |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB-18 issue 6 of 26.02.2024 | |
| 40 | Water, Water intended for human consumption, Wastewater | Selenium concentration Range (0,001 – 0,050) mg/dm3 |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB-26 issue 5 of 22.02.2024 | |
| 41 | Water, Water intended for human consumption, Wastewater | BTEX concentration Benzene (0,03 – 150) μg/dm3 Ethylbenzene (0,03 – 150) μg/dm3 Toluene (0,03 – 150) μg/dm3 m+p Xylene (0,03 – 300) μg/dm3 o-Xylene (0,03 – 150) μg/dm3 Styrene (0,03 – 150) μg/dm3 |
Gas chromatography with purge and trap technique (Purge&Trap) and flame ionization detection (P&T GC-FID) | PN-EN ISO 15680:2008 | |
| 42 | Water, Water intended for human consumption, Wastewater | Sum of BTEX and BTX (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 43 | Water, Water intended for human consumption, Wastewater | BTEX concentration Benzene (0,03 – 150) μg/dm3 Ethylbenzene (0,03 – 150) μg/dm3 Toluene (0,03 – 150) μg/dm3 m+p-Xylene (0,03 – 300) μg/dm3 o-Xylene (0,03 – 150) μg/dm3 Styrene (0,03 – 150) μg/dm3 |
Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) | PB-47 issue 2 of 22.02.2024 | |
| 44 | Water, Wastewater | Carbon concentration: total organic carbon (TOC) Range (0,5 – 500) mg/dm3 total carbon (TC) Range (0,5 – 500) mg/dm3 inorganic carbon (IC) Range (0,5 – 500) mg/dm3 |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| 45 | Water intended for human consumption | Carbon concentration: total organic carbon (TOC) Range (0,5 – 100) mg/dm3 total carbon (TC) Range (0,5 – 100) mg/dm3 inorganic carbon (IC) Range (0,5 – 100) mg/dm3 |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| 46 | Seawater | Carbon concentration: total organic carbon (TOC) Range (0,5 – 20) mg/dm3 total carbon (TC) Range (0,5 – 20) mg/dm3 inorganic carbon (IC) Range (0,5 – 20) mg/dm3 |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| 47 | Water | Free cyanide concentration Range (0,005 – 15,0) mg/dm3 |
Spectrophotometric method | PN-C-04603-01:1980 | |
| 48 | Water | Bound cyanide concentration Range (0,005 – 15,0) mg/dm3 |
Spectrophotometric method | PN-C-04603-01:1980 | |
| 49 | Water | Total cyanide concentration Range (0,05 – 15,0) mg/dm3 |
Spectrophotometric method | PN-C-04603-01:1980 | |
| 50 | Water | 17β-estradiol (E2) concentration Range (0,010 –1,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 51 | Water intended for human consumption | 17β-estradiol (E2) concentration Range (0,0010 –1,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 52 | Water | Reduction-oxidation (redox) potential ref. to SHE Range (-100 – 1000) mV |
Potentiometric method | PB-48 issue 2 of 22.02.2024 | |
| 53 | Swimming pool water | Reduction-oxidation (redox) potential ref. to Ag/AgCl 3,5 mol/l KCl Range (-280 – 850) mV |
Potentiometric method | PB-48 issue 2 of 22.02.2024 | |
| 54 | Water, Water intended for human consumption | Permanganate index Range (0,5 – 100) mg/dm3 |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 55 | Water, Water intended for human consumption | Nitrates (0,10 − 250) mg/dm3 | Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 56 | Water, Water intended for human consumption | Bisphenol A concentration Range (0,010 – 5,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 57 | Water, Water intended for human consumption | Concentration of 17-ethinylestradiol (EE2) Range (0,010 – 1,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 58 | Water, Water intended for human consumption | Mercury concentration Range 0,05 μg/dm3 – 1,0 mg/dm3 |
Atomic absorption spectrometry with amalgamation technique | PB-21 issue 8 of 30.03.2026 | |
| 59 | Water, Water intended for human consumption | Concentration of polycyclic aromatic hydrocarbons (PAH) naphthalene (1 – 1000) ng/dm3 acenaphthylene (1 – 1000) ng/dm3 acenaphthene (1 – 1000) ng/dm3 fluorene (1 – 1000) ng/dm3 phenanthrene (1 – 1000) ng/dm3 anthracene (1 – 1000) ng/dm3 fluoranthene (1 – 1000) ng/dm3 pyrene (1 – 1000) ng/dm3 benzo(a)anthracene (1 – 1000) ng/dm3 chrysene (1 – 1000) ng/dm3 benzo(b)fluoranthene (1 – 1000) ng/dm3 benzo(k)fluoranthene (1 – 1000) ng/dm3 benzo(a)pyrene (0,17 – 1000) ng/dm3 indeno(1,2,3,-cd)pyrene (1 – 1000) ng/dm3 dibenzo(a,h)anthracene (1 – 1000) ng/dm3 benzo(g,h,i)perylene (0,17 – 1000) ng/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-02 issue 6 of 22.02.2024 | |
| 60 | Water, Water intended for human consumption | Sum of polycyclic aromatic hydrocarbons (PAH) (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 61 | Water, Water intended for human consumption | Sum of aliphatic and aromatic hydrocarbons C6 – C12 (sum of gasolines) Range (1 – 200) μg/dm3 |
Gas chromatography with purge and trap technique (Purge&Trap) and flame ionization detection (P&T GC-FID) | PB-12 issue 11 of 22.02.2024 | |
| 62 | Water, Water intended for human consumption | Sum of hydrocarbons C6 – C40 (sum of gasolines and mineral oil) (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 63 | Water, Water intended for human consumption | Chromium(VI) concentration Range (0,005 – 0,200) mg/dm3 |
Spectrophotometric method | PN-EN ISO 18412:2007 | |
| 64 | Water | Total nitrogen concentration Range (0,5 – 150) mg/dm3 |
Spectrophotometric method | PB-03 issue 6 of 22.02.2024, based on MERCK cuvette tests No. 1.14537 and 1.14763 | |
| 65 | Water | Total nitrogen concentration Range (0,5 – 700) mg/dm3 |
Spectrophotometric method | PB-03 issue 6 of 22.02.2024, based on MERCK cuvette tests No. 1.14537 and 1.14763 | |
| 66 | Water, Wastewater | Dissolved solids Range (1,00 – 10 000) mg/dm3 |
Gravimetric method | PB-13 issue 5 of 22.02.2024 | |
| 67 | Water, Wastewater | Dry residue at 105°C and 180°C Range (10,0 – 10000) mg/dm3 |
Gravimetric method | PB-13 issue 5 of 22.02.2024 | |
| 68 | Water, Wastewater | Chloride concentration Range (5,0 – 5000) mg/dm3 |
Titrimetric method | PN-EN ISO 9297:1994 | |
| 69 | Water, Wastewater | Sulfate concentration Range (5 – 1000) mg/dm3 |
Spectrophotometric method | PB–08 issue 7 of 22.02.2024 | based on the MERCK cuvette test No. 1.14548 | |
| 70 | Water, Wastewater | Phosphate concentration Range (0,03 – 40) mg/dm3 |
Spectrophotometric method | PB-07 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14848 | |
| 71 | Water, Wastewater | Total phosphorus concentration Range (0,05 – 50,0) mg /dm3 |
Spectrophotometric method | PB-20 issue 5 of 22.02.2024, based on the MERCK cuvette test No. 1.14543 | |
| 72 | Water, Wastewater | Nitrate nitrogen concentration Range (0,2 – 20) mg/dm3 |
Spectrophotometric method | PB-04 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14773 | |
| 73 | Water, Wastewater | Nitrite nitrogen concentration Range (0,002 – 1,00) mg/dm3 |
Spectrophotometric method | PB-05 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14776 | |
| 74 | Water, Wastewater | Sulfide concentration Range (0,05 − 1,5) mg/dm3 |
Spectrophotometric method | PB-17 issue 5 of 22.02.2024, based on the MERCK cuvette test No. 1.14779 | |
| 75 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Electrical conductivity Range (50 – 50 000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 76 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Mineral oil index Range (0,01 – 50) mg/dm3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 77 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Biochemical oxygen demand BOD5 Range (0,50 – 3,00) mg/dm3 O2 |
Titrimetric method | PN-EN 1899-2:2002 | |
| 78 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Biochemical oxygen demand BOD5 Range (2,00 – 2100) mg/dm3 O2 |
Titrimetric method | PN-EN ISO 5815-1:2019-12 | |
| 79 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Biochemical oxygen demand BOD5 Range (0,50 – 3,00) mg/dm3 O2 |
Optical method | PN-EN 1899-2:2002 ISO 17289:2014 | |
| 80 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Biochemical oxygen demand BOD5 Range (2, 00 – 2100) mg/dm3 O2 |
Optical method | PN-EN ISO 5815-1:2019-12 | |
| 81 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Dissolved oxygen concentration Range (0,50 − 15,0) mg/dm3 O2 |
Titrimetric method | PN-EN 25813:1997 | |
| 82 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Dissolved oxygen concentration Range (0,5 − 20) mg/dm3 O2 |
Optical method | ISO 17289:2014 | |
| 83 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Alkalinity / hydrogen carbonates Range (0,40 − 20) mmol/dm3 (0,40 − 20) mval/dm3 (20 − 1000) mg/dm3 CaCO3 Bicarbonates Range (24,4 − 1220) mg/dm3 HCO3 ̅ |
Titrimetric method | PN-EN ISO 9963-1:2001+Ap1:2004 | |
| 84 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Alkaline alkalinity (calculated) | I-23 issue 2 of 26.02.2024 | ||
| 85 | Water, Water intended for human consumption, Wastewater, Rainwater and snowmelt water | Total suspended solids (TSS) Range (2,00 – 1000) mg/dm3 |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 86 | Rainwater and snowmelt water, Wastewater | Permanganate index Range (5 – 100) mg/dm3 |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 87 | Wastewater | Mercury concentration Range 0,05 μg/dm3 – 30 mg/dm3 |
Atomic absorption spectrometry with amalgamation technique | PB-21 issue 8 of 30.03.2026 | |
| 88 | Wastewater | Concentration of polycyclic aromatic hydrocarbons (PAH) naphthalene (1 – 1000) ng/dm3 acenaphthylene (1 – 1000) ng/dm3 acenaphthene (1 – 1000) ng/dm3 fluorene (1 – 1000) ng/dm3 phenanthrene (1 – 1000) ng/dm3 anthracene (1 – 1000) ng/dm3 fluoranthene (1 – 1000) ng/dm3 pyrene (1 – 1000) ng/dm3 benzo(a)anthracene (1 – 1000) ng/dm3 chrysene (1 – 1000) ng/dm3 benzo(b)fluoranthene (1 – 1000) ng/dm3 benzo(k)fluoranthene (1 – 1000) ng/dm3 benzo(a)pyrene (1 – 1000) ng/dm3 indeno(1,2,3,-cd)pyrene (1 – 1000) ng/dm3 dibenzo(a,h)anthracene (1 – 1000) ng/dm3 benzo(g,h,i)perylene (1 – 1000) ng/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-02 issue 6 of 22.02.2024 | |
| 89 | Wastewater | Sum of polycyclic aromatic hydrocarbons (PAH) (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 90 | Wastewater | 17β-estradiol (E2) concentration Range (0,10 –5,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 91 | Wastewater | 17α-ethinylestradiol (EE2) concentration Range (0,10 – 5,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 92 | Wastewater | Bisphenol A concentration Range (0,10 – 5,0) μg/dm3 |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-46 issue 3 of 22.02.2024 | |
| 93 | Ground, Bottom sediments | Mercury content Range (0,010 – 6,0) mg/kg |
Inductively coupled plasma mass spectrometry (ICP-MS) | PB–42 issue 7 of 05.06.2025 | |
| 94 | Ground, Bottom sediments | Particle size distribution in the particle size range (< 0,063 – 2,00) mm divided into fractions Range (0,5 – 99,5) % |
Sieve method | PN-EN ISO 17892-4:2017-01 | |
| 95 | Ground, Bottom sediments | Water permeability - coefficient of permeability Range (10-7 – 10-1) m/s (from calculations based on the particle size distribution curve) |
PB-44 issue 3 of 22.02.2024 | ||
| 96 | Ground, Bottom sediments, Sewage sludge | Dry matter / water content Range (0,5 – 99,9) % |
Gravimetric method | PN-EN ISO 11465:2026-03 | |
| 97 | Ground, Bottom sediments, Sewage sludge | pH - in H2O, pH - in KCl Range 2,0 – 13,0 |
Potentiometric method | PN-EN ISO 10390:2022-09 | |
| 98 | Ground, Bottom sediments, Sewage sludge | Loss on ignition of dry matter (LOI) Range (0,1 – 99,9) % |
Gravimetric method | PN-EN 15935:2022-01 | |
| 99 | Ground, Bottom sediments, Sewage sludge | Content of hydrocarbons in the range C10 to C40 (mineral oils) Range (5,0 – 10 000) mg/ kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 100 | Ground, Bottom sediments, Sewage sludge | Sum of polycyclic aromatic hydrocarbons (PAH) and hydrocarbons in the range C10 to C40 (mineral oils) (calculated) | I-24 issue 3 of 26.02.2024 | ||
| 101 | Ground, Bottom sediments, Sewage sludge | Content of hydrocarbons C6-C12 (petrol fraction) Range (1,0 – 1000) mg/kg |
Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) | PB-43 issue 3 of 22.02.2024 | |
| 102 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV), WasteO) code: 19 09 99 | Sampling for physical and chemical testing Regulated area: Sampling performed for the purposes of the regulated area covered by:
- Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
- Regulation of the Minister of the Environment of 6 February 2015 on the use of municipal sewage sludge (Journal of Laws 2015, item 257, as amended)
- Regulation of the Minister of the Environment of 20 January 2015 on the R10 recovery process (Journal of Laws 2015, item 132)
- Regulation of the Minister of the Environment of 11 May 2015 on the recovery of waste outside installations and equipment (Journal of Laws 2015, item 796)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
I-28 issue 2 of 26.02.2024 | ||
| 103 | WasteO) code: 19 08 05 | Sampling for physical and chemical testing Regulated area: Sampling performed for the purposes of the regulated area covered by:
- Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
- Regulation of the Minister of the Environment of 6 February 2015 on the use of municipal sewage sludge (Journal of Laws 2015, item 257, as amended)
- Regulation of the Minister of the Environment of 20 January 2015 on the R10 recovery process (Journal of Laws 2015, item 132)
- Regulation of the Minister of the Environment of 11 May 2015 on the recovery of waste outside installations and equipment (Journal of Laws 2015, item 796)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
PN-EN ISO 5667-13:2011 excluding cl. 6.3.3; 6.3.4; 6.3.5; 6.3.7; 6.3.8.5 | ||
| 104 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | pH Range 2,0 – 12,5 Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Potentiometric method | PN-EN ISO 10523:2012 | PN-EN 12457-2:2006 | |
| 105 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Electrical conductivity Range (50 – 50 000) μS/cm Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Conductometric method | PN-EN 27888:1999 | PN-EN 12457-2:2006 | |
| 106 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Arsenic content Range (0,01 – 0,50) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Inductively coupled plasma optical emission spectrometry with hydride generation technique (HG-ICP-OES) | PB-25 issue 5 of 22.02.2024 | PN-EN 12457-2:2006 | |
| 107 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Antimony content Range (0,01 – 0,50) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Inductively coupled plasma optical emission spectrometry with hydride generation technique (HG-ICP-OES) | PB-18 issue 6 of 22.02.2024 | PN-EN 12457-2:2006 | |
| 108 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Selenium content Range (0,01 – 0,50) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB-26 issue 5 of 22.02.2024 | PN-EN 12457-2:2006 | |
| 109 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Content of selenium, arsenic, antimony Se (0,01 – 10) mg/kg As (0,01 – 10) mg/kg Sb (0,01 – 10) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Inductively coupled plasma mass spectrometry (ICP-MS) | PN-EN 12457-2:2006 | PN-EN ISO 17294-2:2024-04 | |
| 110 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Dissolved solids content Range (100 – 75 000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Gravimetric method | PB-13 issue 5 of 22.02.2024 | PN-EN 12457-2:2006 | |
| 111 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Anion content Fluorides (1,0 – 1000) mg/kg Chlorides (50 – 50 000) mg/kg Sulfates (50 – 10 000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | PN-EN 12457-2:2006 | |
| 112 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Mercury content Range (0,005– 200) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Atomic absorption spectrometry with amalgamation technique | PB–21 issue 8 of 30.03.2026 | PN-EN 12457-2:2006 | |
| 113 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Dissolved organic carbon (DOC) content Range (40 – 5000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
High-temperature combustion with IR detection | PN-EN 1484:1999 | PN-EN 12457-2:2006 | |
| 114 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI), Mixed organic chemical waste (XIV); WasteO) code: 02 03 80, 04 02 21, 19 09 99 | Metal content Pb (0,05 – 1000) mg/kg Cu (0,06 – 1000) mg/kg Zn (0,22 – 5000) mg/kg Ni (0,05 – 1000) mg/kg Cd (0,005 – 1000) mg/kg Cr (0,05 – 1000) mg/kg Ba (0,01 – 1000) mg/kg Mo (0,08 – 1000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-2:2006 | |
| 115 | WasteDAB-11: Construction waste (III), Waste from flue gas cleaning (X), Slags, ashes and furnace dusts (XI) | Metal content As (0,03 – 1000) mg/kg Se (0,03 – 1000) mg/kg Sb (0,04 – 1000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-2:2006 | |
| 116 | WasteO) code: 10 01 01, 10 01 02, 10 01 05, 10 01 21, 19 09 05, 10 01 80 | Acid neutralization capacity ANC (neutralizing power) Range (2,0 – 400) mmol/kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Titrimetric method; Potentiometric titration method | PN-EN ISO 9963-1:2001+Ap1:2004 | PN-EN 12457-2:2006 | |
| 117 | WasteO): code 17 05 04, 17 05 05*, 17 05 06, 17 08 01*, 17 08 02, 17 01 81, 01 05 05*, 01 05 08, 06 05 02 *, 06 05 03 | Content of hydrocarbons in the range C10 to C40 (mineral oils) Range (5,0 – 10 000) mg/ kg Regulated area: Tests performed for the purposes of the regulated area covered by the Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 14039:2008 | |
| 118 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII); Slags, ashes and furnace dusts (XI); WasteO) code: 10 01 05, 19 09 05, 19 09 99 | pH Range 2,0 – 13,0 Regulated area: Tests performed for the purposes of the regulated area covered by:
- Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
- Regulation of the Minister of the Environment of 6 February 2015 on the use of municipal sewage sludge (Journal of Laws 2015, item 257, as amended)
- Regulation of the Minister of the Environment of 20 January 2015 on the R10 recovery process (Journal of Laws 2015, item 132)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Potentiometric method | PN-EN ISO 10390:2022-09 | |
| 119 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII); Slags, ashes and furnace dusts (XI); WasteO) code: 10 01 05, 19 09 05, 19 09 99 | Dry matter / water content Range (0,5 – 99,9)% Regulated area: Tests performed for the purposes of the regulated area covered by:
- Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
- Regulation of the Minister of the Environment of 6 February 2015 on the use of municipal sewage sludge (Journal of Laws 2015, item 257, as amended)
- Regulation of the Minister of the Environment of 20 January 2015 on the R10 recovery process (Journal of Laws 2015, item 132)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Gravimetric method | PN-EN ISO 11465:2026-03 | |
| 120 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Sludges from industrial processes (VII); Slags, ashes and furnace dusts (XI); WasteO) code: 10 01 05, 19 09 05, 19 09 99 | Loss on ignition of dry matter (LOI) Range (0,1 – 99,9)% Regulated area: Tests performed for the purposes of the regulated area covered by:
- Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws 2015, item 1277)
- Regulation of the Minister of the Environment of 6 February 2015 on the use of municipal sewage sludge (Journal of Laws 2015, item 257, as amended)
- Regulation of the Minister of the Environment of 20 January 2015 on the R10 recovery process (Journal of Laws 2015, item 132)
DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation groups are given in Annex No. 1 to DAB-11
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. |
Gravimetric method | PN-EN 15935:2022-01 | |
| 121 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 01 05 08, 01 05 05*, 17 05 05*, 17 05 06 | BTEX content Benzene (0,05 – 300) mg/kg Ethylbenzene (0,05 – 300) mg/kg Toluene (0,05 – 300) mg/kg m+p-Xylene (0,10 – 300) mg/kg o-Xylene (0,05 – 300) mg/kg Styrene (0,05 – 300) mg/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Headspace gas chromatography with mass spectrometry detection (HS-GC-MS) | PN-EN ISO 22155:2016-07 | |
| 122 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 01 05 08, 01 05 05*, 17 05 05*, 17 05 06 | Sum of BTEX and BTX (calculated) Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
I-24 issue 3 of 26.02.2024 | ||
| 123 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 | Carbon content: Total organic carbon (TOC) Range (1,0 – 400) g/kg Total carbon (TC) Range (1,0 – 400) g/kg Inorganic carbon (IC) Range (1,0 – 120) g/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
High-temperature combustion with IR detection | PN - ISO 10694:2002 | PN-EN 13137:2004 | |
| 124 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 | Polychlorinated biphenyls (PCB) content PCB 28 (0,1 – 50) μg/kg PCB 52 (0,1 – 50) μg/kg PCB 101 (0,1 – 50) μg/kg PCB 118 (0,1 – 50) μg/kg PCB 138 (0,1 – 50) μg/kg PCB 153 (0,1 – 50) μg/kg PCB 180 (0,1 – 50) μg/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Gas chromatography with mass spectrometry (GC-MS) | PB-09 issue 6 of 22.02.2024 | |
| 125 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 | Sum of polychlorinated biphenyls (PCB) (calculated) Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
I-24 issue 3 of 26.02.2024 | ||
| 126 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 | Polycyclic aromatic hydrocarbons (PAH) content Naphthalene (0,001 – 1000) mg/kg Acenaphthylene (0,001 – 1000) mg/kg Acenaphthene (0,001 – 1000) mg/kg Fluorene (0,001 – 1000) mg/kg Phenanthrene (0,001 – 1000) mg/kg Anthracene (0,001 – 1000) mg/kg Fluoranthene (0,001 – 1000) mg/kg Pyrene (0,001 – 1000) mg/kg Benzo(a)anthracene Range (0,001 – 1000) mg/kg Chrysene (0,001 – 1000) mg/kg Benzo(b)fluoranthene (0,001 – 1000) mg/kg Benzo(k)fluoranthene (0,001 – 1000) mg/kg Benzo(a)pyrene (0,001 – 1000) mg/kg Indeno (1,2,3,-cd)pyrene (0,001 – 1000) mg/kg Dibenzo(a,h)anthracene (0,001 – 1000) mg/kg Benzo(g,h,i)perylene (0,001 – 1000) mg/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Gas chromatography with mass spectrometry (GC-MS) | PB-09 issue 6 of 22.02.2024 | |
| 127 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 17 05 05*, 17 05 06 | Sum of polycyclic aromatic hydrocarbons (PAH) calculated Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
I-24 issue 3 of 26.02.2024 | ||
| 128 | Soils (geotechnical), Bottom sediments, Waste O) code: 17 05 05*, 17 05 06 | Content of organotin compounds: Tributyltin (TBT) (0,01 – 10) mg/kg Dibutyltin (DBT) (0,001 – 10) mg/kg Monobutyltin (MBT) Range (0,005 – 10) mg/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-EN ISO 23161:2019-03 | |
| 129 | Fish | Mercury content Range (0,005 - 2,00) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-41 issue 5 of 30.03.2026 | |
| 130 | Fish | Mercury content Range (0,005 – 1,0) mg/kg |
Inductively coupled plasma mass spectrometry (ICP-MS) | PB–42 issue 7 of 05.06.2025 | |
| 131 | Fish | Metal content Pb (0,005 – 5,0) mg/kg Cd (0,0020 – 1,00) mg/kg As (0,0050 – 5,00) mg/kg |
Inductively coupled plasma mass spectrometry (ICP-MS) | PB–42 issue 7 of 05.06.2025 | |
| 132 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 10 01 01, 10 01 02, 10 01 05, 17 05 06, 17 05 05*, 10 01 21, 19 09 05, 10 01 80 | Total nitrogen content Range (0,02 – 18,5) % Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Titrimetric method | PN-ISO 11261:2002 | |
| 133 | Soils (geotechnical), Bottom sediments, Sewage sludge, Waste O) code: 10 01 01, 10 01 02, 10 01 05, 17 05 06, 17 05 05*, 10 01 21, 19 09 05, 10 01 80 | Mercury content Range (0,01 – 50) mg/kg Regulated area: O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Atomic absorption spectrometry with amalgamation technique | PB–21 issue 8 of 30.03.2026 | |
| 134 | Plant material | Mercury content Range (0,0005 – 1,0) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB–21 issue 8 of 30.03.2026 | |
| 135 | Plant material | Mercury content Range (0,005 – 1,0) mg/kg |
Inductively coupled plasma mass spectrometry (ICP-MS) | PB–42 issue 7 of 05.06.2025 | |
| 136 | Soils (geotechnical) E, Bottom sediments E, Sewage sludge E, Waste O) E code: 06 05 02*, 06 05 03, 10 01 01, 10 01 02, 10 01 05, 17 05 05*, 17 05 06, 10 01 21, 19 09 05, 10 01 80 | Element content Regulated area: Flexible scope
E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories.
The list of activities conducted under the flexible scope of accreditation is made publicly available by the accredited body or on any request.
O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PB-10 | |
| 137 | Water E, Water intended for human consumption E, Wastewater E | Element concentrations Regulated area: Flexible scope
E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories.
The list of activities conducted under the flexible scope of accreditation is made publicly available by the accredited body or on any request. |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885 | |
| 138 | Water E, Water intended for human consumption E, Wastewater E | Element concentrations Regulated area: Flexible scope
E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories.
The list of activities conducted under the flexible scope of accreditation is made publicly available by the accredited body or on any request. |
Inductively coupled plasma mass spectrometry (ICP-MS) | PN-EN ISO 17294-2 | |
Reference standards (96)
I-11 issue 3 of 26.02.2024
I-16 issue 3 of 26.02.2024
I-18 issue 3 of 26.02.2024
I-19 issue 3 of 26.02.2024
I-20 issue 3 of 26.02.2024
I-23 issue 2 of 26.02.2024
I-24 issue 3 of 26.02.2024
I-25 issue 2 of 26.02.2024
I-28 issue 2 of 26.02.2024
I-29 issue 2 of 26.02.2024
ISO 17289:2014
PB – 49 issue 1 of 15.01.2025 based on HACH test 8021
PB- 25 issue 5 of 22.02.2024
PB-02 issue 6 of 22.02.2024
PB-03 issue 6 of 22.02.2024, based on MERCK cuvette tests No. 1.14537 and 1.14763
PB-04 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14773
PB-05 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14776
PB-06 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14752
PB-07 issue 6 of 22.02.2024, based on the MERCK cuvette test No. 1.14848
PB-09 issue 6 of 22.02.2024
PB-10
PB-12 issue 11 of 22.02.2024
PB-13 issue 5 of 22.02.2024
PB-17 issue 5 of 22.02.2024, based on the MERCK cuvette test No. 1.14779
PB-18 issue 6 of 22.02.2024
PB-18 issue 6 of 26.02.2024
PB-19 issue 5 of 22.02.2024
PB-20 issue 5 of 22.02.2024, based on the MERCK cuvette test No. 1.14543
PB-21 issue 8 of 30.03.2026
PB-25 issue 5 of 22.02.2024
PB-26 issue 5 of 22.02.2024
PB-35 issue 5 of 22.02.2024
PB-41 issue 5 of 30.03.2026
PB-43 issue 3 of 22.02.2024
PB-44 issue 3 of 22.02.2024
PB-46 issue 3 of 22.02.2024
PB-47 issue 2 of 22.02.2024
PB-48 issue 2 of 22.02.2024
PB–08 issue 7 of 22.02.2024
PB–21 issue 8 of 30.03.2026
PB–21 issue 8 of 30.03.2026
PB–27 issue 5 of 22.02.2024
PB–28 issue 7 of 22.02.2024
PB–29 issue 7 of 22.02.2024
PB–30 issue 6 of 22.02.2024
PB–31 issue 7 of 22.02.2024
PB–32 issue 7 of 22.02.2024
PB–42 issue 7 of 05.06.2025
PN - ISO 10694:2002
PN-C-04603-01:1980
PN-EN 12457-2:2006
PN-EN 13137:2004
PN-EN 14039:2008
PN-EN 1484:1999
PN-EN 15935:2022-01
PN-EN 1899-2:2002
PN-EN 1899-2:2002 ISO 17289:2014
PN-EN 25663:2001 excluding cl. 5.8
PN-EN 25813:1997
PN-EN 27888:1999
PN-EN 872:2007+Ap1:2007
PN-EN ISO 10304-1:2009+AC:2012
PN-EN ISO 10390:2022-09
PN-EN ISO 10523:2012
PN-EN ISO 11465:2026-03
PN-EN ISO 11885
PN-EN ISO 11885:2009
PN-EN ISO 15680:2008
PN-EN ISO 16703:2011
PN-EN ISO 17294-2
PN-EN ISO 17294-2:2024-04
PN-EN ISO 17892-4:2017-01
PN-EN ISO 18412:2007
PN-EN ISO 20236:2025-05
PN-EN ISO 22155:2016-07
PN-EN ISO 23161:2019-03
PN-EN ISO 5667-13:2011 excluding cl. 6.3.3; 6.3.4; 6.3.5; 6.3.7; 6.3.8.5
PN-EN ISO 5667-19:2006
PN-EN ISO 5815-1:2019-12
PN-EN ISO 7027-2:2019-04 cl. 5.2
PN-EN ISO 8467:2001
PN-EN ISO 9297:1994
PN-EN ISO 9377-2:2003
PN-EN ISO 9963-1:2001+Ap1:2004
PN-ISO 10381-4:2007-01
PN-ISO 10381-5:2009
PN-ISO 11261:2002
PN-ISO 15705:2005
PN-ISO 5667-10:2021-11
PN-ISO 5667-4:2017-10
PN-ISO 5667-5:2017-10
PN-ISO 5667-6:2016-12
PN-ISO 5667-9:2005
PN-ISO 6439:1994 Method B
PN-R-04031:1997
based on the MERCK cuvette test No. 1.14548