🇵🇱 HENKEL POLSKA Sp. z o.o. PL

PCA AB 556 • Stąporków, Poland • 50 methods

Water & wastewater

HENKEL POLSKA Sp. z o.o. is a laboratory accredited by PCA under number AB 556 (Stąporków, Poland). Its accreditation scope covers 50 test methods in the following areas: Water & wastewater. Test objects include: Masonry mortars, Adhesives, External thermal insulation systems, Floor screeds. Most frequently used techniques: Pull-off method, Constant rate of loading method, Gravimetric method.

At a glance

Accreditation number: PCA AB 556
Methods in scope: 50
Types of test objects: 8
Techniques used: 16
City: Stąporków, Poland

Accreditation number: AB 556
Accreditation body: PCA
Address: ul. Domaniewska 41, 02-672 Warszawa, CENTRALNE LABORATORIUM BADAWCZE, Stara Góra, 26-220 Stąporków
City: Stąporków, Poland

What this laboratory tests (8)

Masonry mortars — 14 methods
Adhesives — 9 methods
External thermal insulation systems — 7 methods
Floor screeds — 6 methods
Tile adhesives — 5 methods
Tile grouts — 4 methods
Paints, Primers — 3 methods
Reinforcing meshes — 2 methods

Analytical techniques used (16)

Pull-off method — 8 methods
Constant rate of loading method — 6 methods
Gravimetric method — 6 methods
Graf-Kaufman method — 3 methods
Air jet sieving method — 2 methods
Flow table method — 2 methods
Böhme method — 1 method
Constant rate of force increase method — 1 method
Deep abrasion method — 1 method
Dry sieving method; Wet sieving method — 1 method
Method A – pressure; Method B – alcohol — 1 method
Penetrating rod method — 1 method
Pycnometric method — 1 method
Rolling wheel load method — 1 method
Simulation method — 1 method
and 1 more

Laboratory locations

HENKEL POLSKA Sp. z o.o. (main site) — ul. Domaniewska 41, 02-672 Warszawa
Centralne Laboratorium Badawcze; Stara Góra, 26-220 Stąporków — Stara Góra, 26-220 Stąporków

Certificate information

Issue date: 06.11.2026
Issue no.: 21

Accreditation scope — test methods (50)

No.	Test object	Methodology / Parameters	Technique	Reference document
Centralne Laboratorium Badawcze; Stara Góra, 26-220 Stąporków
1	Tile adhesives	Slip		PN-EN 12004-2:2017-03
2	Tile adhesives	Open time Range (0,1 – 18,0) kN	Pull-off method	PN-EN 12004-2:2017-03
3	Tile adhesives	Przyczepność początkowa; Przyczepność po zanurzeniu w wodzie; Przyczepność po starzeniu termicznym; Przyczepność po cyklu zamrażania-rozmrażania Range (0,1 – 18,0) kN	Pull-off method	PN-EN 12004-2:2017-03
4	Tile adhesives	Transverse deformation Range (0,2 – 40) mm	Constant rate of loading method	PN-EN 12004-2:2017-03
5	Tile adhesives	Shear strength Range (0,1 – 20) kN	Constant rate of loading method	PN-EN 12004-2:2017-03
6	Tile grouts	Abrasion resistance Range up to 5000 mm3	Deep abrasion method	PN-EN 13888-2:2023-02
7	Tile grouts	Wytrzymałość na zginanie; Wytrzymałość na ściskanie Range (0,1 – 10) kN Range (4,0 – 300) kN	Constant rate of loading method	PN-EN 13888-2:2023-02
8	Tile grouts	Shrinkage Range (0 – 12) mm	Graf-Kaufman method	PN-EN 13888-2:2023-02
9	Tile grouts	Water absorption		PN-EN 13888-2:2023-02
10	Floor screeds	Wytrzymałość na zginanie; Wytrzymałość na ściskanie Range (0,1 – 10) kN Range (4,0 – 300) kN	Constant rate of loading method	PN-EN 13892-2:2004
11	Floor screeds	Abrasion resistance Range up to 350 cm3	Böhme method	PN-EN 13892-3:2015-02
12	Floor screeds	Abrasion resistance of floor underlay materials covered with floor covering Range (150 – 550) N	Rolling wheel load method	PN-EN 13892-7:2004
13	Floor screeds	Adhesion Range (0,1 – 18,0) kN	Pull-off method	PN-EN 13892-8:2004
14	Floor screeds	Shrinkage and swelling Range (0 – 12) mm	Graf-Kaufman method	PN-EN 13454-2:2019-02
15	Floor screeds	Dimensional change Range (0 – 12) mm	Graf-Kaufman method	PN-EN 13872:2005
16	Masonry mortars	Grain size distribution Range (0,063 – 8,0) mm	Dry sieving method; Wet sieving method	PN-EN 1015-1:2000+A1:2007
17	Masonry mortars	Consistency Range (100 – 300) mm	Flow table method	PN-EN 1015-3:2000+A1:2005+A2:2007
18	Masonry mortars	Bulk density	Vibration method; Shaking method; Filling method	PN-EN 1015-6:2000+A1:2007
19	Masonry mortars	Air content Range below 20 % Range above 20%	Method A – pressure; Method B – alcohol	PN-EN 1015-7:2000
20	Masonry mortars	Open time of general purpose mortar	Penetrating rod method	PN-EN 1015-9:2001+A1:2007
21	Masonry mortars	Open time of thin-layer mortar	Flow table method	PN-EN 1015-9:2001+A1:2007
22	Masonry mortars	Correction time of thin-layer mortar		PN-EN 1015-9:2001+A1:2007
23	Masonry mortars	Density of dried hardened mortar		PN-EN 1015-10:2001+A1:2007
24	Masonry mortars	Flexural strength Range (0,1 – 10) kN	Constant rate of loading method	PN-EN 1015-11:2020-04
25	Masonry mortars	Compressive strength Range (4,0 – 300) kN	Constant rate of loading method	PN-EN 1015-11:2020-04
26	Masonry mortars	Adhesion Range (0,1 – 18,0) kN	Pull-off method	PN-EN 1015-12:2016-08
27	Masonry mortars	Water absorption coefficient		PN-EN 1015-18:2003
28	Masonry mortars	Water vapour transmission coefficient		PN-EN 1015-19:2000+A1:2005
29	Masonry mortars	Frost resistance		PN-85/B-04500
30	Adhesives	Adhesion of the adhesive mortar to the substrate Range (0,01 – 20) kN	Pull-off method	EAD 040083-01-0404
31	Adhesives	Adhesion of the adhesive mortar to the thermal insulation product Range (0,01 – 20) kN	Pull-off method	EAD 040083-01-0404
32	Adhesives	Ash content	Gravimetric method	EAD 040083-01-0404
33	Adhesives	Particle size distribution Range (0,04 – 4,0) mm	Air jet sieving method	EAD 040083-01-0404
34	Adhesives	Density		EAD 040083-01-0404
35	Adhesives	Density		EAD 040083-01-0404
36	Adhesives	Dry matter content	Gravimetric method	EAD 040083-01-0404
37	Adhesives	Ash content	Gravimetric method	EAD 040083-01-0404
38	Adhesives	Particle size distribution Range (0,04 – 4,0) mm	Air jet sieving method	EAD 040083-01-0404
39	Reinforcing meshes	Ash content	Gravimetric method	EAD 040083-01-0404 \| EAD 040016-01-0404
40	Reinforcing meshes	Breaking strength and elongation of the reinforcing mesh Range (0,01 – 20) kN	Constant rate of force increase method	EAD 040083-01-0404 \| EAD 040016-01-0404
41	External thermal insulation systems	Water absorption (capillary water rise test)		EAD 040083-01-0404
42	External thermal insulation systems	Watertightness (behaviour after heat-humidity cycles)		EAD 040083-01-0404
43	External thermal insulation systems	Watertightness (behaviour under freezing and thawing)	Simulation method	EAD 040083-01-0404
44	External thermal insulation systems	Resistance to hard body impact		EAD 040083-01-0404 \| PN-B-10027:1993
45	External thermal insulation systems	Water vapour permeability (water vapour diffusion resistance)		EAD 040083-01-0404 \| PN-EN ISO 7783:2018-11
46	External thermal insulation systems	Adhesion after ageing Range (0,01 – 20) kN	Pull-off method	EAD 040083-01-0404
47	External thermal insulation systems	Adhesion of the reinforced render layer to the thermal insulation product Range (0,01 – 20) kN	Pull-off method	EAD 040083-01-0404
48	Paints, Primers	Density	Pycnometric method	EAD 040083-01-0404 \| PN-EN ISO 2811-1:2016-04
49	Paints, Primers	Dry matter content	Gravimetric method	EAD 040083-01-0404
50	Paints, Primers	Ash content	Gravimetric method	EAD 040083-01-0404

Reference standards (24)

EAD 040016-01-0404

EAD 040083-01-0404

PN-85/B-04500

PN-B-10027:1993

PN-EN 1015-10:2001+A1:2007

PN-EN 1015-11:2020-04

PN-EN 1015-12:2016-08

PN-EN 1015-18:2003

PN-EN 1015-19:2000+A1:2005

PN-EN 1015-1:2000+A1:2007

PN-EN 1015-3:2000+A1:2005+A2:2007

PN-EN 1015-6:2000+A1:2007

PN-EN 1015-7:2000

PN-EN 1015-9:2001+A1:2007

PN-EN 12004-2:2017-03

PN-EN 13454-2:2019-02

PN-EN 13872:2005

PN-EN 13888-2:2023-02

PN-EN 13892-2:2004

PN-EN 13892-3:2015-02

PN-EN 13892-7:2004

PN-EN 13892-8:2004

PN-EN ISO 2811-1:2016-04

PN-EN ISO 7783:2018-11

The same scope as data (JSON): https://labcoda.pl/api/accreditation-scopes/labs/PL/AB%20556