🇵🇱 ZAKŁAD USŁUG TECHNICZNYCH "ZUT" s.c. PL
EnvironmentWater & wastewater
ZAKŁAD USŁUG TECHNICZNYCH "ZUT" s.c. is a laboratory accredited by PCA under number AB 522 (Częstochowa, Poland). Its accreditation scope covers 118 test methods in the following areas: Environment, Water & wastewater. Test objects include: Workplace environment - air, Workplace environment - air samples collected on sorbent tubes, Wastewater, Workplace environment - air samples collected on filters. Most frequently used techniques: Gas chromatography with flame ionization detection (GC-FID), Flame atomic absorption spectrometry (FAAS), Direct measurement method.
At a glance
- Accreditation number: PCA AB 522
- Methods in scope: 118
- Types of test objects: 17
- Techniques used: 13
- City: Częstochowa, Poland
- Accreditation number
- AB 522
- Accreditation body
- PCA
- Address
- Bożena i Waldemar Szleper, LABORATORIUM OCHRONY ŚRODOWISKA I WARUNKÓW PRACY, ul. Ikara 128b 42-221 Częstochowa
- City
- Częstochowa, Poland
What this laboratory tests (17)
- Workplace environment - air — 40 methods
- Workplace environment - air samples collected on sorbent tubes — 25 methods
- Wastewater — 18 methods
- Workplace environment - air samples collected on filters — 7 methods
- Wastewater, rainwater and snowmelt water — 3 methods
- Workplace environment - emergency lighting — 3 methods
- General environment – noise from installations, equipment and industrial plants — 2 methods
- Rooms in residential, collective residence and public utility buildings - noise — 2 methods
- Workplace environment - air samples collected into absorbing solution — 2 methods
- Workplace environment - cold microclimate — 2 methods
- Workplace environment - energy expenditure — 2 methods
- Workplace environment - hot microclimate — 2 methods
- Workplace environment - indoor electric lighting — 2 methods
- Workplace environment - moderate microclimate — 2 methods
- Workplace environment - noise — 2 methods
- and 2 more
Analytical techniques used (13)
- Gas chromatography with flame ionization detection (GC-FID) — 51 methods
- Flame atomic absorption spectrometry (FAAS) — 14 methods
- Direct measurement method — 11 methods
- Spectrophotometric method — 8 methods
- Gravimetric method — 5 methods
- Flame emission spectrometry — 4 methods
- Titrimetric method — 3 methods
- Electrochemical method — 2 methods
- Flame absorption spectrometry method (FAAS) — 1 method
- Flame atomic emission spectrometry (FEAS) — 1 method
- Manual method; Automatic method — 1 method
- Personal dosimetry method — 1 method
- Potentiometric method — 1 method
Laboratory locations
- ZAKŁAD USŁUG TECHNICZNYCH "ZUT" s.c. (main site) — ul. Ikara 128b, 42-221 Częstochowa
- ENVIRONMENTAL PROTECTION AND WORKING CONDITIONS LABORATORY — ul. Ikara 128b, 42-221 Częstochowa
Certificate information
- Issue date
- 18.08.2026
- Issue no.
- 26
Accreditation scope — test methods (118)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Environmental Protection and Working Conditions Laboratory | |||||
| 1 | Workplace environment - air | Sampling for the assessment of occupational exposure to: dust agents – inhalable fraction – respirable fraction organic substances, including – inhalable fraction inorganic substances, including – inhalable fraction – respirable fraction – thoracic fraction metals and their compounds, including – inhalable fraction – respirable fraction asbestos – respirable fibres |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 2 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 3 | Workplace environment - air | Concentration of harmful dust agents – inhalable fraction portland cement titanium dioxide natural graphite synthetic graphite kaolin wood dusts flour dusts dusts not classified according to toxicity organic dusts of animal and plant origin, excluding wood and flour dusts carbon black calcium sulfate (VI) (gypsum) talc coal (hard, brown) calcium magnesium carbonate (dolomite) Range (0,14 – 20,42) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05+Ap1:2022-08 | |
| 4 | Workplace environment - air | Concentration of harmful dust agents – respirable fraction portland cement natural graphite organic dusts of animal and plant origin, excluding wood and flour dusts talc coal (hard, brown) Range (0,11 – 37,88) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05+Ap1:2022-08 | |
| 5 | Workplace environment - air | Nitrogen oxide concentration Range (0,14 - 11,56) mg/m3 Range (0,112 – 9,3) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 6 | Workplace environment - air | Nitrogen dioxide concentration Range (0,04 - 3,55) mg/m3 Range (0,021 – 1,9) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 7 | Workplace environment - air | Carbon monoxide concentration Range (2,32 – 139,2) mg/m3 Range (2 – 120) ppm |
Electrochemical method | PB-17-02 issue 6 of 25.04.2025 | |
| 8 | Workplace environment - air | Exposure indices (calculated) | PB-17-02 issue 6 of 25.04.2025 | ||
| 9 | Workplace environment - air | Concentration of copper and its inorganic compounds expressed as Cu Range (0,003 - 6,9) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | PN-79/Z-04106.02 | |
| 10 | Workplace environment - air | Concentration of manganese and its inorganic compounds expressed as Mn – inhalable fraction Range (0,002 - 2,1) mg/m3 – respirable fraction Range (0,002 - 2,1) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10 | |
| 11 | Workplace environment - air | Zinc oxide concentration calculated as Zn – inhalable fraction Range (0,001 - 16,7) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04100.03 | |
| 12 | Workplace environment - air | Concentration of iron oxides calculated as Fe – inhalable fraction Range (0,003 – 10,7) mg/m3 – respirable fraction Range (0,003 – 9,7) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2025-02 | |
| 13 | Workplace environment - air | Concentration of lead and its inorganic compounds calculated as Pb Range (0,0035 – 1,39) mg/m3 |
Flame atomic absorption spectrometry (FAAS) | PN-Z 04487:2017-10 | |
| 14 | Workplace environment - air | Sodium hydroxide concentration Range (0,006 - 2,0) mg/m3 |
Flame emission spectrometry | PN-Z-04435:2011 | |
| 15 | Workplace environment - air | Potassium hydroxide concentration Range (0,005 - 2,4) mg/m3 |
Flame emission spectrometry | PN-Z-04436:2011 | |
| 16 | Workplace environment - air | Ethylbenzene concentration Range (0,21 – 1041,72) mg/m3 Cumene concentration Range (0,52 – 1028,11) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 * | |
| 17 | Workplace environment - air | Harmful substances released from nitrocellulose coating products: acetone Range (0,53 – 2677,22) mg/m3 butan-1-ol Range (0,50 – 997,77) mg/m3 2-methyl-1-propanol Range (0,50 – 985,28) mg/m3 toluene Range (0,21–1083,17) mg/m3 xylene – mixture of isomers 1,2; 1,3; 1,4 Range (0,21–1073,33) mg/m3 ethyl acetate Range (0,42 – 2086,77) mg/m3 Range (0,115 – 570,8) ppm butyl acetate Range (0,54 - 1083) mg/m3 ethanol Range (2,28 – 4553,56) mg/m3 2-butoxyethanol Range (0,22–1089,83) mg/m3 2-ethoxyethanol Range (0,22 – 1141,11) mg/m3 Range (0,059 – 305,2) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023-02 | PB-17-27 issue 7 of 20.06.2022 * | |
| 18 | Workplace environment - air | Methyl acetate concentration Range (0,22-1114,22) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04119.01 | PB-17-27 issue 7 of 20.06.2022 * | |
| 19 | Workplace environment - air | Butan-2-one concentration Range (0,28-1425,61) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 * | |
| 20 | Workplace environment - air | Styrene concentration Range (0,55-1100,44) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04152.02 | PB-17-27 issue 7 of 20.06.2022 * | |
| 21 | Workplace environment - air | Tetrachloroethene concentration Range (0,94-1909,94) mg/m3 Range (0,136 – 277,6) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04325:2006 | PB-17-27 issue 7 of 20.06.2022 * | |
| 22 | Workplace environment - air | Trichloroethene concentration Range (0,83-1714,94) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04325:2006 | PB-17-27 issue 7 of 20.06.2022 * | |
| 23 | Workplace environment - air | 4-methylpentan-2-one concentration Range (0,20-983,83) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2001, 4 (30) | PB-17-27 issue 7 of 20.06.2022 * | |
| 24 | Workplace environment - air | 3-methylbutan-1-ol concentration Range (0,50-997,56) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04355:2005 | PB-17-27 issue 7 of 20.06.2022 * | |
| 25 | Workplace environment - air | Acetonitrile concentration Range (0,46-925,33) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04244-02:2006 | PB-17-27 issue 7 of 20.06.2022 * | |
| 26 | Workplace environment - air | Propan-2-ol concentration Range (1,33-2693,00) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04224.02 | PB-17-27 issue 7 of 20.06.2022 * | |
| 27 | Workplace environment - air | Vinyl acetate concentration Range (0,56-1127,61) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-87/Z-04178.02 | PB-17-27 issue 7 of 20.06.2022 * | |
| 28 | Workplace environment - air | Kerosene concentration Range (0,94-947,44) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227.02 | PB-17-27 issue 7 of 20.06.2022 * | |
| 29 | Workplace environment - air | Pentane concentration Range (2,11-4203,44) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 * | |
| 30 | Workplace environment - air | Hexane concentration Range (0,41-805,78) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 * | |
| 31 | Workplace environment - air | Heptane concentration Range (1,55-3107,83) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2004, 4 (42) | PB-17-27 issue 7 of 20.06.2022 * | |
| 32 | Workplace environment - air | Methylcyclohexane concentration Range (2,16-4311,67) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 * | |
| 33 | Workplace environment - air | Trimethylbenzene concentration – mixture of isomers 1,2,3;1,2,4;1,3,5 Range (0,52-1091,83) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 | PB-17-27 issue 7 of 20.06.2022 * | |
| 34 | Workplace environment - air | 2-furylmethanol concentration Range (0,67-1365,06) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-90/Z-04214.02 | PB-17-21 issue 7 of 20.06.2022 * | |
| 35 | Workplace environment - air | Acetic acid concentration Range (0,56-1172,78) mg/m3 Range (0,225 – 470,7) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | PB-17-21 issue 7 of 20.06.2022 * | |
| 36 | Workplace environment - air | Phenol concentration Range (0,083-83,33) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 1999, No. 22 | PB-17-21 issue 7 of 20.06.2022 * | |
| 37 | Workplace environment - air | Naphthalene concentration Range (2,61-68,89) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04098-3:2005 | PB-17-21 issue 7 of 20.06.2022 * | |
| 38 | Workplace environment - air | Cresol concentration – mixture of isomers Range (0,08-83,33) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 1999, No. 22 | PB-17-21 issue 7 of 20.06.2022 * | |
| 39 | Workplace environment - air | Cyclohexane concentration Range (0,33-1802,61) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 * | |
| 40 | Workplace environment - air | Propan-1-ol concentration Range (0,72-1439,22) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04224-3:2003 | PB-17-27 issue 7 of 20.06.2022 * | |
| 41 | Workplace environment - indoor electric lighting | Illuminance Range (0,5 - 9500) lx |
Direct measurement method | PN-83/E-04040.03 | PB-17-03 issue 5 of 21.05.2025 | |
| 42 | Workplace environment - indoor electric lighting | Illuminance uniformity (calculated) | PN-83/E-04040.03 | PB-17-03 issue 5 of 21.05.2025 | ||
| 43 | Workplace environment - emergency lighting | Illuminance Range (0,5 - 200) lx |
Direct measurement method | PN-EN 1838:2013-11 excluding cl. 4.2.3; 4.2.4; 4.2.5; 4.2.6; 4.3.3; 4.3.4; 4.3.5; 4.3.6; 4.4.3; 4.4.4; 4.4.5; 4.4.6; 5 | |
| 44 | Workplace environment - emergency lighting | Ratio of minimum to maximum illuminance (calculated) | PN-EN 1838:2013-11 excluding cl. 4.2.3; 4.2.4; 4.2.5; 4.2.6; 4.3.3; 4.3.4; 4.3.5; 4.3.6; 4.4.3; 4.4.4; 4.4.5; 4.4.6; 5 | ||
| 45 | Workplace environment - emergency lighting | Illuminance uniformity for the high-risk zone (calculated) | PN-EN 1838:2013-11 excluding cl. 4.2.3; 4.2.4; 4.2.5; 4.2.6; 4.3.3; 4.3.4; 4.3.5; 4.3.6; 4.4.3; 4.4.4; 4.4.5; 4.4.6; 5 | ||
| 46 | Workplace environment - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (25 – 136) dB C-weighted peak sound pressure level Range (69 - 136) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy No. 2 – cl. 10 | PN-EN ISO 9612:2025-11 excluding the method covering strategies No. 2 and 3 – cl. 10 and 11 | |
| 47 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy No. 2 – cl. 10 | PN-EN ISO 9612:2025-11 excluding the method covering strategies No. 2 and 3 – cl. 10 and 11 | ||
| 48 | General environment – noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level Range (23 - 136) dB |
Direct measurement method | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F | PN-ISO 1996-2:1999+A1:2002 | |
| 49 | General environment – noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level for the reference time T expressed by the indicators LAeqD and LAeqN (calculated) | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F | PN-ISO 1996-2:1999+A1:2002 | ||
| 50 | Rooms in residential, collective residence and public utility buildings - noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (23 - 136) dB |
Direct measurement method | PN-87/B-02156 | |
| 51 | Rooms in residential, collective residence and public utility buildings - noise | A-weighted equivalent sound level for reference time T (calculated) | PN-87/B-02156 | ||
| 52 | Workplace environment – hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,06 – 100 ) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | |
| 53 | Workplace environment – hand-arm vibration | Daily exposure, expressed as the 8-hour energy-equivalent vector sum of the frequency-weighted RMS vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes and less, expressed as the vector sum of the frequency-weighted RMS vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | ||
| 54 | Workplace environment - whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,01 – 35) m/s2 |
Direct measurement method | PN-EN 14253+ A1:2011 | |
| 55 | Workplace environment - whole-body vibration | Daily exposure, expressed as the 8-hour energy-equivalent frequency-weighted RMS vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the coefficients (1,4awx, 1,4awy, awz), Exposure lasting 30 minutes and less, expressed as the frequency-weighted RMS vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the coefficients (1,4awx, 1,4awy, awz) (calculated) | PN-EN 14253+ A1:2011 | ||
| 56 | Workplace environment - moderate microclimate | Air temperature Range (5 – 50) °C Black globe temperature Range (5 – 50) °C Air humidity Range (20 – 80) % Air velocity Range (0,16 – 3,0) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | |
| 57 | Workplace environment - moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006 | PN-EN ISO 7730:2006/Ap2:2016-04 | ||
| 58 | Workplace environment - hot microclimate | Air temperature Range (20 – 60) °C Natural wet bulb temperature Range (20 – 50) °C Black globe temperature Range (20 – 60) °C |
Direct measurement method | PN-EN ISO 7243:2018-01 | |
| 59 | Workplace environment - hot microclimate | WBGT index, WBGTeff index (calculated) | PN-EN ISO 7243:2018-01 | ||
| 60 | Workplace environment - cold microclimate | Air temperature Range (-30 – 20) °C Black globe temperature Range (-30 – 20) °C Air humidity Range (20 – 80) % Air velocity Range (0,16 – 3,0) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 61 | Workplace environment - cold microclimate | IREQmin index, IREQneutral index, twc index (calculated) | PN-EN ISO 11079:2008 | ||
| 62 | Workplace environment - energy expenditure | Air temperature Range (5 - 35) oC Air flow Range (10 – 59) dm3/min |
Direct measurement method | PB-17-31 issue 4 of 30.05.2025 | |
| 63 | Workplace environment - energy expenditure | Energy expenditure (calculated) | PB-17-31 issue 4 of 30.05.2025 | ||
| 64 | Workplace environment - air samples collected into absorbing solution | Nitrogen oxide content Range (0,0001 -0,008) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 65 | Workplace environment - air samples collected into absorbing solution | Nitrogen dioxide content Range (0,0001 - 0,008) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 66 | Workplace environment - air samples collected on filters | Content of copper and its inorganic compounds calculated as Cu Range (0,002 - 5,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PB-17-05 issue 5 of 30.06.2022 | |
| 67 | Workplace environment - air samples collected on filters | Content of manganese and its inorganic compounds calculated as Mn – inhalable fraction Range (0,002 - 1,5) mg in the sample – respirable fraction Range (0,002 - 1,5) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PB-17-05 issue 5 of 30.06.2022 | |
| 68 | Workplace environment - air samples collected on filters | Content of zinc oxides expressed as Zn – inhalable fraction Range (0,001 - 12,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PB-17-05 issue 5 of 30.06.2022 | |
| 69 | Workplace environment - air samples collected on filters | Content of iron oxides expressed as Fe – inhalable fraction Range (0,003 – 7,7) mg in the sample – respirable fraction Range (0,003 – 7,7) mg in the sample |
Flame absorption spectrometry method (FAAS) | PB-17-05 issue 5 of 30.06.2022 | |
| 70 | Workplace environment - air samples collected on filters | Content of lead and its inorganic compounds calculated as Pb Range (0,0025 – 1,00) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PB-17-05 issue 5 of 30.06.2022 | |
| 71 | Workplace environment - air samples collected on filters | Sodium hydroxide content Range (0,004 – 1,22) mg in the sample |
Flame emission spectrometry | PN-Z-04435:2011 | PB-17-06 issue 4 of 06.02.2013 | |
| 72 | Workplace environment - air samples collected on filters | Potassium hydroxide content Range (0,004 – 1,44) mg in the sample |
Flame emission spectrometry | PN-Z-04436:2011 | PB-17-06 issue 4 of 06.02.2013 | |
| 73 | Workplace environment - air samples collected on sorbent tubes | Ethylbenzene content Range (3,8-18751) μg in the sample Cumene content Range (9,3-18506) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 74 | Workplace environment - air samples collected on sorbent tubes | Harmful substances released from nitrocellulose coating products: acetone Range (9,6-48190) μg in the sample butan-1-ol Range (9,0-17960) μg in the sample 2-methylpropan-1-ol Range (9,0-17735) μg in the sample toluene Range (3,8-18957) μg in the sample xylene – mixture of isomers 1,2;1,3;1,4 Range (3,8-19320) μg in the sample ethyl acetate Range (7,5-37562) μg in the sample butyl acetate Range (9,7-19498) μg in the sample ethanol Range (41-81964) μg in the sample 2-butoxyethanol Range (3,9-19617) μg in the sample 2-ethoxyethanol Range (4,0-20540) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023.02 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 75 | Workplace environment - air samples collected on sorbent tubes | Methyl acetate content Range (4,0-20056) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04119.01 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 76 | Workplace environment - air samples collected on sorbent tubes | Butan-2-one content Range (5,0-25661) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 77 | Workplace environment - air samples collected on sorbent tubes | Styrene content Range (9,9-19808) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04152.02 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 78 | Workplace environment - air samples collected on sorbent tubes | Tetrachloroethene content Range (17-34379) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04325:2006 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 79 | Workplace environment - air samples collected on sorbent tubes | Trichloroethene content Range (15-30869) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04325:2006 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 80 | Workplace environment - air samples collected on sorbent tubes | 4-methylpentan-2-one content Range (3,6-17709) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2001, 4 (30) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 81 | Workplace environment - air samples collected on sorbent tubes | 3-methylbutan-1-ol content Range (9,0-17956) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04355:2005 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 82 | Workplace environment - air samples collected on sorbent tubes | Acetonitrile content Range (8,3-16656) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04244-02:1996 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 83 | Workplace environment - air samples collected on sorbent tubes | Propan-2-ol content Range (24,0-48474) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04224.02 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 84 | Workplace environment - air samples collected on sorbent tubes | Vinyl acetate content Range (10-20297) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-87/Z-04178.02 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 85 | Workplace environment - air samples collected on sorbent tubes | Kerosene content Range (17-17054) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227.02 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 86 | Workplace environment - air samples collected on sorbent tubes | Pentane content Range (38-75662) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 87 | Workplace environment - air samples collected on sorbent tubes | Hexane content Range (7,3-14504) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 88 | Workplace environment - air samples collected on sorbent tubes | Heptane content Range (28,0-55941) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2004, 4 (42) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 89 | Workplace environment - air samples collected on sorbent tubes | Methylcyclohexane content Range (39-77610) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 90 | Workplace environment - air samples collected on sorbent tubes | Content of trimethylbenzene – mixture of isomers 1,2,3;1,2,4;1,3,5 Range (9,4 - 19653) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 91 | Workplace environment - air samples collected on sorbent tubes | 2-furylmethanol content Range (12-24571) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-90/Z-04214.02 | PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 * | |
| 92 | Workplace environment - air samples collected on sorbent tubes | Acetic acid content Range (10-21110) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 * | |
| 93 | Workplace environment - air samples collected on sorbent tubes | Phenol content Range (1,5-1500) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 1999, No. 22 | PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 * | |
| 94 | Workplace environment - air samples collected on sorbent tubes | Naphthalene content Range (47-1240) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04098-3:2005 | PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 * | |
| 95 | Workplace environment - air samples collected on sorbent tubes | Cresol content – mixture of isomers Range (1,5-1500) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 1999, No. 22 | PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 * | |
| 96 | Workplace environment - air samples collected on sorbent tubes | Cyclohexane content Range (6,0-32447) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2011, 1 (67) | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * | |
| 97 | Workplace environment - air samples collected on sorbent tubes | Propan-1-ol content Range (13,0-25906) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04224-3:2003 | PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * Reference documents | |
| 98 | Wastewater, rainwater and snowmelt water | Sampling for chemical and physical testing | Manual method; Automatic method | PN-ISO 5667-10:2021-11 | |
| 99 | Wastewater, rainwater and snowmelt water | Total suspended solids (TSS) Range (2,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 100 | Wastewater, rainwater and snowmelt water | Mineral oil index Range (0,20 – 30) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | PB-17-38 issue 2 of 17.02.2014 | |
| 101 | Wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 102 | Wastewater | Ammonium nitrogen concentration Range (1,0 – 400) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 103 | Wastewater | Nitrite nitrogen concentration Range (0,0125 – 2,5) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 104 | Wastewater | Nitrate nitrogen concentration Range (0,20 – 50) mg/l |
Spectrophotometric method | PN-82/C-04576.08 | |
| 105 | Wastewater | Kjeldahl nitrogen concentration Range (1,0 – 1000) mg/l |
Titrimetric method | PN-EN 25663:2001 | |
| 106 | Wastewater | Total nitrogen concentration (calculated) | PB-17-10 issue 2 of 17.02.2014 | ||
| 107 | Wastewater | Chemical oxygen demand – COD-Cr Range (30 – 7000) mg/l O2 |
Titrimetric method | PN-ISO 6060:2006 | |
| 108 | Wastewater | Biochemical oxygen demand – BOD5 Range (3,0 – 6000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 109 | Wastewater | Sulfate concentration Range (10 – 5000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 110 | Wastewater | Total phosphorus concentration Range (0,050 – 80) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 8. + Ap1:2010 + Ap2:2010 | |
| 111 | Wastewater | Chloride concentration Range (5,0 – 2300) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 112 | Wastewater | Dissolved solids Range (10 – 10 000) mg/l |
Gravimetric method | PB-17-18 issue 2 of 17.02.2014 | |
| 113 | Wastewater | Metal concentrations zinc (0,05 – 70) mg/l cadmium (0,050 – 80) mg/l lead (0,25 – 400) mg/l nickel (0,10 – 250) mg/l copper (0,10 – 500) mg/l cobalt (0,20 – 3,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 Method A | |
| 114 | Wastewater | Calcium concentration Range (0,50 – 1000) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN ISO 7980: 2002 | |
| 115 | Wastewater | Metal concentrations sodium (0,10 – 7000) mg/l potassium (0,10 – 100) mg/l |
Flame atomic emission spectrometry (FEAS) | PN-ISO 9964-3:1994 | |
| 116 | Wastewater | Chromium concentration Range (0,10 – 100) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 1233:2000 | |
| 117 | Wastewater | Metal concentrations manganese (0,10 – 150) mg/l iron (0,25 – 1500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PB-17-11 issue 2 of 11.02.2013 | |
| 118 | Wastewater | Silver concentration Range (0,10 – 120) mg/l |
Flame atomic absorption spectrometry (FAAS) | PB-17-23 issue 2 of 11.02.2013 | |
Reference standards (81)
PB-17-02 issue 6 of 25.04.2025
PB-17-03 issue 5 of 21.05.2025
PB-17-05 issue 5 of 30.06.2022
PB-17-06 issue 4 of 06.02.2013
PB-17-10 issue 2 of 17.02.2014
PB-17-11 issue 2 of 11.02.2013
PB-17-18 issue 2 of 17.02.2014
PB-17-21 issue 7 of 20.06.2022 *
PB-17-21 issue 7 of 20.06.2022 excluding cl. 5.3 *
PB-17-23 issue 2 of 11.02.2013
PB-17-27 issue 7 of 20.06.2022 *
PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 *
PB-17-27 issue 7 of 20.06.2022 excluding cl. 5.4 * Reference documents
PB-17-31 issue 4 of 30.05.2025
PB-17-38 issue 2 of 17.02.2014
PN-78/Z-04119.01
PN-79/Z-04106.02
PN-82/C-04576.08
PN-83/E-04040.03
PN-86/Z-04152.02
PN-87/B-02156
PN-87/Z-04100.03
PN-87/Z-04178.02
PN-89/Z-04023-02
PN-89/Z-04023.02
PN-90/Z-04214.02
PN-92/Z-04224.02
PN-92/Z-04227.02
PN-EN 1233:2000
PN-EN 14253+ A1:2011
PN-EN 1838:2013-11 excluding cl. 4.2.3; 4.2.4; 4.2.5; 4.2.6; 4.3.3; 4.3.4; 4.3.5; 4.3.6; 4.4.3; 4.4.4; 4.4.5; 4.4.6; 5
PN-EN 25663:2001
PN-EN 26777:1999
PN-EN 872:2007+Ap1:2007
PN-EN ISO 10523:2012
PN-EN ISO 11079:2008
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015-11
PN-EN ISO 5815-1:2019-12
PN-EN ISO 6878:2006 cl. 8. + Ap1:2010 + Ap2:2010
PN-EN ISO 7243:2018-01
PN-EN ISO 7730:2006
PN-EN ISO 7730:2006/Ap2:2016-04
PN-EN ISO 7980: 2002
PN-EN ISO 9377-2:2003
PN-EN ISO 9612:2011 excluding the method covering strategy No. 2 – cl. 10
PN-EN ISO 9612:2025-11 excluding the method covering strategies No. 2 and 3 – cl. 10 and 11
PN-ISO 1996-2:1999+A1:2002
PN-ISO 5667-10:2021-11
PN-ISO 6060:2006
PN-ISO 7150-1:2002
PN-ISO 8288:2002 Method A
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-ISO 9964-3:1994
PN-N-01307:1994
PN-Z 04487:2017-10
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04016-4:1998
PN-Z-04098-3:2005
PN-Z-04224-3:2003
PN-Z-04244-02:1996
PN-Z-04244-02:2006
PN-Z-04323:2004
PN-Z-04325:2006
PN-Z-04355:2005
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04469:2025-02
PN-Z-04472:2015-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05+Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05+Ap1:2022-08
Principles and Methods of Assessing the Working Environment 1999, No. 22
Principles and Methods of Assessing the Working Environment 2001, 4 (30)
Principles and Methods of Assessing the Working Environment 2004, 4 (42)
Principles and Methods of Assessing the Working Environment 2011, 1 (67)
Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023, item 1706) excluding cl. F