🇵🇱 ORLEN LABORATORIUM S.A. PL
Petrochemistry & fuelsWater & wastewaterEnvironmentMaterials & polymersAutomotiveConstructionMicrobiology
ORLEN LABORATORIUM S.A. is a laboratory accredited by PCA under number AB 484 (Płock, Poland). Its accreditation scope covers 831 test methods in the following areas: Petrochemistry & fuels, Water & wastewater, Environment, Materials & polymers. Test objects include: Water, wastewater, Workplace environment − air, Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME), Wastewater. Most frequently used techniques: Spectrophotometric method, Gravimetric method, Gas chromatography with flame ionization detection (GC-FID).
At a glance
- Accreditation number: PCA AB 484
- Methods in scope: 831
- Types of test objects: 182
- Techniques used: 114
- City: Płock, Poland
- Accreditation number
- AB 484
- Accreditation body
- PCA
- Address
- ul. Chemików 7, 09-411 Płock
- City
- Płock, Poland
What this laboratory tests (182)
- Water, wastewater — 90 methods
- Workplace environment − air — 48 methods
- Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) — 43 methods
- Wastewater — 42 methods
- Liquid fuels: diesel fuel, light fuel oil — 32 methods
- Liquid fuels: unleaded petrol — 32 methods
- Liquid fuels: aviation turbine fuel — 23 methods
- Gaseous fuels: liquefied petroleum gases, LPG — 21 methods
- Gaseous fuels: hydrogen (automotive) — 20 methods
- Liquid fuels: diesel fuel — 20 methods
- Lubricants: base oils, engine oils, industrial lubricating oils — 16 methods
- Other petroleum products: paving bitumens, industrial bitumens and bituminous products — 15 methods
- Liquid fuels: liquid biofuels: bioethanol — 14 methods
- Crude oil — 12 methods
- Water — 12 methods
- and 167 more
Analytical techniques used (114)
- Spectrophotometric method — 75 methods
- Gravimetric method — 73 methods
- Gas chromatography with flame ionization detection (GC-FID) — 65 methods
- Visual method — 44 methods
- Titrimetric method — 34 methods
- Optical method — 27 methods
- Oscillation method — 27 methods
- Distillation method — 23 methods
- Conductometric method — 20 methods
- Coulometric titration method — 17 methods
- Ultraviolet fluorescence method — 17 methods
- Inductively coupled plasma optical emission spectrometry (ICP-OES) — 16 methods
- Flame atomic absorption spectrometry (FAAS) — 13 methods
- Motor method — 13 methods
- Capillary method — 12 methods
- and 99 more
Laboratory sections (22)
- Fertilisers and Natural Environment Laboratory TT1 — 100 methods
- Crude Oil Processing Laboratory PP2 — 81 methods
- Fuels and Aromatics Laboratory PP1 — 76 methods
- Working Environment Laboratory PP8 — 68 methods
- Refinery Products Laboratory in Trzebinia PP6 — 64 methods
- Water and Wastewater Laboratory — 62 methods
- Petroleum Products Laboratory in Jedlicze PP5 — 50 methods
- Physico-Chemistry Laboratory — 46 methods
- Chromatography Laboratory PP3 — 45 methods
- Water, Wastewater and Petrochemical Products Laboratory PP4 — 39 methods
- Instrumental Laboratory — 37 methods
- Laboratory Service Point in Wrocław PP7/5 — 27 methods
- Laboratory Service Point in Warsaw PP7/4 — 23 methods
- Laboratory Service Point in Lublin PP7/1 — 22 methods
- Laboratory Service Point in Olsztyn PP7/2 — 21 methods
- and 7 more
Laboratory locations
- ORLEN LABORATORIUM S.A. (main site) — ul. Chemików 7, 09-411 Płock
- Water, Wastewater and Petrochemical Products Laboratory PP4 — ul. Chemików 7, 09-411 Płock
- Fuels and Aromatics Laboratory PP1 — ul. Chemików 7, 09-411 Płock
- Crude Oil Processing Laboratory PP2 — ul. Chemików 7, 09-411 Płock
- Working Environment Laboratory PP8 — ul. Chemików 7, 09-411 Płock
- Working Environment Laboratory PP8 — ul. Toruńska 222, 87-800 Włocławek
- Chromatography Laboratory PP3 — ul. Chemików 7, 09-411 Płock
- Płock Logistics Team LL/P — ul. Chemików 7, 09-411 Płock
- Włocławek Logistics Team LL/W — ul. Toruńska 222, 87-800 Włocławek
- PTA Laboratory TT5 — ul. Krzywa Góra 13/15/17, 87-800 Włocławek
- Laboratory Service Point in Wrocław PP7/5 — ul. Swojczycka 44, 51-501 Wrocław
- Laboratory Service Point in Wrocław PP7/5 (technical activity) — ul. Swojczycka 43, 51-501 Wrocław
- Refinery Products Laboratory in Trzebinia PP6 — ul. Fabryczna 22, 32-540 Trzebinia
- Petroleum Products Laboratory in Jedlicze PP5 — ul. Trzecieskiego 14, 38-460 Jedlicze
- Laboratory Service Point in Ostrów Wielkopolski PP7/3 — ul. Węglowa 1, 63-400 Ostrów Wielkopolski
- Laboratory Service Point in Lublin PP7/1 — ul. Zemborzycka 116 B, 20-445 Lublin
- Laboratory Service Point in Olsztyn PP7/2 — ul. Gutkowo 54, 11-041 Olsztyn
- Laboratory Service Point in Warsaw PP7/4 — ul. Estrady 8, 05-080 Izabelin
- Fertilisers and Natural Environment Laboratory TT1 — ul. Toruńska 222, 87-800 Włocławek
- Water and Wastewater Laboratory — ul. Elbląska 135, 80-718 Gdańsk
- Instrumental Laboratory — ul. Elbląska 135, 80-718 Gdańsk
- Physico-Chemistry Laboratory — ul. Elbląska 135, 80-718 Gdańsk
- Continuous Operation Samplers Department — ul. Elbląska 135, 80-718 Gdańsk
- Continuous Operation Testing Laboratory — ul. Elbląska 135, 80-718 Gdańsk
Certificate information
- Issue date
- 01.10.2026
- Issue no.
- 53
Accreditation scope — test methods (831)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Water, Wastewater and Petrochemical Products Laboratory PP4 | |||||
| 1 | Water, wastewater | Concentration of: total carbon (TC), total organic carbon (TOC) Range (0,30 – 1000) mg/l Total inorganic carbon (TIC) concentration Range (1,00 – 10,0) mg/l |
Spectrometry method in the infrared range IR | PN-EN 1484:1999 | |
| 2 | Water, wastewater | Electrical conductivity Range 10,0 μS/cm – 100 mS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 3 | Water, wastewater | Sulphate (VI) concentration Range (10 – 1000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 4 | Water, wastewater | Phenol index Range (0,010 – 10) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 | |
| 5 | Water, wastewater | Biochemical oxygen demand BOD5 Range (2 – 6000) mg O2/l |
Optical method | PN-EN ISO 5815-1 :2019-12 | |
| 6 | Water | Chromium(VI) concentration Range (2 – 20) μg/l |
Spectrophotometric method | PN-EN ISO 18412:2007 | |
| 7 | Wastewater | Phosphorus concentration Range (0,01 – 50) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 | |
| 8 | Wastewater | Chloride concentration Range (10 – 5 000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 9 | Wastewater | Ammonium nitrogen concentration Range (0,040 – 5,00) mg/l Ammonia (ammonium ion) concentration Calculated |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 10 | Wastewater | Total suspended solids (TSS) Range (1,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 11 | Wastewater | Kjeldahl nitrogen concentration Range (1,0 – 100) mg/l |
Titrimetric method | PN-EN 25663:2001 | |
| 12 | Wastewater | Chemical oxygen demand (COD) Range (10,0 – 10000) mg O2/l |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 13 | Wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 14 | Wastewater | Total nitrogen concentration (sum of Kjeldahl nitrogen, nitrate and nitrite nitrogen) (calculated) | Method No. 047 issue 5 of 19.11.2019 | ||
| 15 | Wastewater | Chromium +6 concentration Range (0,01 – 1,00) mg/l |
Spectrophotometric method | PN-C-04604-08:1977 | |
| 16 | Wastewater | Nitrite nitrogen concentration Range (0,010 – 10,0) mg/l Nitrite concentration (calculated) |
Spectrophotometric method | PN-EN 26777:1999 | |
| 17 | Wastewater | Concentration of organic substances extractable with petroleum ether Range (2,0 – 420) mg/l |
Gravimetric method | Method No. 115 issue 4 of 18.12.2020 | |
| 18 | Wastewater | Dry residue, residue on ignition and dissolved solids Range (10 – 10000) mg/l Loss on ignition (calculated) |
Gravimetric method | Method No. 124 issue 2 of 03.06.2020 | |
| 19 | Wastewater | Nitrate nitrogen concentration Range (0,010 – 30,0) mg/l |
Spectrophotometric method | Method No. 125 issue 2 of 16.07.2020 | |
| 20 | Wastewater | Sulfide concentration Range (0,10 – 1,50) mg/l |
Spectrophotometric method | Method No. 179 issue 3 of 13.12.2023 | |
| 21 | Wastewater | Ammonium nitrogen concentration Range (1,0 – 20) mg/l Ammonia (ammonium ion) concentration (calculated) |
Titrimetric method | PN-ISO 5664:2002 | |
| 22 | Sewage sludge | Content of substances extractable with dichloromethane Range (0,10 – 20,0) %m/m |
Gravimetric method | Method 106 issue 3 of 21.12.2020 | |
| 23 | Sewage sludge | Dry residue Range (0,8 – 48,0) % Water content (calculated) |
Gravimetric method | PN-EN 15934:2013-02 Method A | |
| 24 | Sewage sludge | Loss on ignition of dry matter Range (7,0 – 85,0)% Residue on ignition of dry matter (calculated) |
Gravimetric method | PN-EN 15935:2022-01 | |
| 25 | Construction material: gypsum | Moisture content Range (5,0 – 13,0) % |
Gravimetric method | VGB-M 701 e:2008 cl. 1.2 | |
| 26 | Construction material: gypsum | Purity (CaSO4x2H2O) Range (96,0 – 99,0) % |
Gravimetric method | VGB-M 701 e:2008 cl. 2.1 | |
| 27 | Construction material: gypsum | pH Range 4,0 – 9,0 |
Potentiometric method | VGB-M 701 e:2008 cl. 4 | |
| 28 | Construction material: gypsum | Degree of whiteness Range (35,0 – 78,0) % Ry |
Spectrophotometric method | VGB-M 701 e:2008 cl. 5 | |
| 29 | Construction material: gypsum | Particle size – granulometric analysis >32 μm Range (48,0 – 86,0) % |
Laser diffraction method | Method No. 184 issue 2 of 13.12.2023 | |
| 30 | Construction material: gypsum | Determination of carbonates as CaCO3 Range (0,15 – 1,15) % |
Titrimetric method | VGB-M 701 e:2008 cl. 8.12 | |
| 31 | Construction material: gypsum | Chloride content Cl- Range (24 – 130) mg/kg |
Titrimetric method | VGB-M 701 e:2008 cl. 8.8.3 | |
| 32 | Gaseous fuels: natural gas, dry gas, hydrogen gases, high-pressure gases, low-pressure gases | Hydrogen sulphide content Range (0,0002 – 0,0650) %(v/v) Range (0,0650 – 93) %(v/v) |
Titrimetric method; Titrimetric method | Method 041 issue 6 of 14.11.2024 | |
| 33 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Iodine value Range (105 – 120) g iodine/100g FAME |
Titrimetric method | PN-EN 14111:2022-11 | |
| 34 | Liquid fuels: liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Acid value Range (0,10 – 1,00) mg KOH/g |
Titrimetric method | PN-EN 14104:2021-06 | |
| 35 | Liquid fuels: liquid biofuels: bioethanol | Dry residue Range (5 – 25) mg/100ml |
Gravimetric method | PN-EN 15691:2023-11 | |
| 36 | Liquid fuels: liquid biofuels: bioethanol | Total acidity Range (0,003 – 0,013) %(m/m) |
Titrimetric method | PN-EN 15491:2025-08 | |
| 37 | Liquid fuels: liquid biofuels: bioethanol | Water content Range (0,073 – 0,500) %(m/m) |
Coulometric titration method | PN-EN 15489:2009 | |
| 38 | Liquid fuels: liquid biofuels: bioethanol | Phosphorus content Range (0,15 – 1,5) mg/l |
Spectrophotometric method | PN-EN 15487:2009 | |
| 39 | Liquid fuels: liquid biofuels: bioethanol | Inorganic chloride content Range (1,0 – 20,0) mg/kg |
Ion chromatography with a conductometric detector (IC-CD) | PN-EN 15492:2012 | |
| Fuels and Aromatics Laboratory PP1 | |||||
| 40 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum distillates | Air saturated vapour pressure Range (15,5 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 41 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum distillates | Fractional composition Range (30,0 – 360,0) 0C |
Distillation method | PN-EN ISO 3405:2019-05 excluding cl. 9 | |
| 42 | Liquid fuels: unleaded petrol, aviation gasoline | Lead content Range (2,5 – 6,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 237:2007 | |
| 43 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 250°C | Octane number LOB Range (70 – 115) |
Motor method | PN-EN ISO 5164 :2014-08 | |
| 44 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 250°C | Motor octane number MON Range (70 – 107) |
Motor method | PN-EN ISO 5163 :2014-08 | |
| 45 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 250°C | Oxidation stability Range (60 – 700) minutes |
Induction period method | PN-EN ISO 7536:2011 | |
| 46 | Liquid fuels: unleaded petrol | Manganese content Range (2,0 – 4,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 16135 :2012 | |
| 47 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 48 | Liquid fuels: unleaded petrol | Benzene content Range (0,1 – 1,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 238:2000+A1:2008 | |
| 49 | Liquid fuels: unleaded petrol, Other petroleum products: petrol components | Content of hydrocarbon groups and oxygenates total hydrocarbon content aromatic (10,0 – 50,0) %(v/v) total olefin content: Range (0,4 – 26,85) % (v/v) benzene content (0,38 – 1,96) %(v/v) content of oxygenates: ETBE (0,61 – 14,8) %(v/v) MTBE (0,61 – 15,0) %(v/v) ETOH (0,61 – 16,0) %(v/v) Total oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 22854:2025-07 procedure A | |
| 50 | Liquid fuels: aviation turbine fuel | Density at 15°C Range (700,0 – 860,0) kg/m3 |
Hydrometer method | ASTM D 1298-12b (2017) | |
| 51 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Chemical products: aromatic hydrocarbons, solvents, Other petroleum products: petroleum fractions and/or products with a boiling range 30oC - 300°C | Density at 15°C and 20°C Range (650,0 – 1100,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | ASTM D 4052-22 | |
| 52 | Liquid fuels: unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: petroleum fractions and/or products with a boiling range 30oC - 300oC | Gum content Range (1 – 10) mg/100ml |
Gravimetric method | PN-EN ISO 6246:2017-05 +A1:2020-03 | |
| 53 | Liquid fuels: unleaded petrol, Other petroleum products: petroleum fractions with a boiling range 30°C - 225°C, petrol components | Detailed composition for hydrocarbons up to n-nonane (C9), Non-aromatic hydrocarbons (0,05 – 24,00) %(m/m), Aromatic hydrocarbons (1,00 – 90,00) %(m/m) | Gas chromatography with flame ionization detection (GC-FID) | ASTM D 5134-21 | |
| 54 | Liquid fuels: diesel fuel, Other petroleum products: petroleum distillates | Aromatic hydrocarbon content mononuclear (MAH) Range (7,0 – 30) %(m/m) bicyclic (DAH) (1,0 – 9.7) %(m/m) tri- and polycyclic (T+ AH) (0,1 – 2,0) %(m/m) polycyclic (POLY-AH) (1,1 – 11,8) %(m/m) Total content of aromatic hydrocarbons (calculated) |
High-performance liquid chromatography with refractive index detection (HPLC-RID) | PN-EN 12916:2024-08 procedure A | |
| 55 | Liquid fuels: diesel fuel, liquid biofuels: fatty acid methyl esters (FAME) | Cetane number Range 50,0 – 60,0 |
Motor method | PN-EN ISO 5165:2021-02 | |
| 56 | Liquid fuels: diesel fuel, light fuel oil | Fatty acid methyl esters (FAME) content Range (0,05 – 10,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 57 | Liquid fuels: light heating oil, mixtures of light heating oil with unmarked mineral oil | Solvent Red 19 dye content Range (1,0 – 10,0) mg/l |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV/VIS) | DIN 51430:2018-02 | |
| 58 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: gasoline components, petroleum fractions and/or products with a boiling range of 30°C - 350°C | Copper strip corrosion corrosion class (1 – 4) |
Visual method | PN-EN ISO 2160:2004 | |
| 59 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: gasoline components, petroleum fractions and/or products with a boiling range of 30°C - 350°C | Copper strip corrosion corrosion class (1a – 4c) |
Visual method | ASTM D 130-19 | |
| 60 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: gasoline components, petroleum fractions and/or products with a boiling range of 30°C - 350°C | Sulfur content Range (20,0 – 500) mg/kg |
Wavelength-dispersive X-ray fluorescence spectrometry | PN-EN ISO 20884:2020-03 +A1:2022-03 | |
| 61 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: gasoline components, petroleum fractions and/or products with a boiling range of 30°C - 350°C | Sulfur content Range (0,0020 – 2,50) % (m/m) |
Wavelength-dispersive X-ray fluorescence spectrometry | PN-EN ISO 14596:2009 | |
| 62 | Liquid fuels: unleaded petrol, aviation turbine fuel | Hydrocarbon group content aromatic hydrocarbons Range (5,0 – 70,0) %(v/v) olefinic hydrocarbons (1,0 – 55,0) %(v/v) |
Gel chromatography method (FIA) | ASTM D 1319-20a | PN-EN 15553+A1:2025-05 | |
| 63 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 350°C | Fractional composition Range (30,0 – 360,0) °C |
Automatic distillation method | ASTM D 86-23aɛ2 | |
| 64 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 350°C | Sulfur content Range (3,0 – 500) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 65 | Liquid fuels: diesel fuel, unleaded petrol, aviation gasoline, aviation turbine fuel, Other petroleum products: petroleum fractions and/or products with a boiling range of 30°C - 350°C | Sulfur content Range (1,0 – 1000) mg/kg |
Ultraviolet fluorescence method | ASTM D 5453-24 | |
| 66 | Liquid fuels: aviation turbine fuel | Total sulfur content Range (0,0050 – 0,300) %(m/m) |
Energy-dispersive X-ray fluorescence spectrometry | ASTM D 4294-24 | |
| 67 | Liquid fuels: aviation turbine fuel | Maximum height of a smokeless flame Range (17,0 – 30,0) mm |
Optical method; Visual method | ASTM D 1322-25 | |
| 68 | Liquid fuels: aviation turbine fuel | Acidity Range (0,0001 – 0,100) mg KOH/g |
Titrimetric method | ASTM D 3242-23 | |
| 69 | Liquid fuels: aviation turbine fuel | Net calorific value (calculated) | ASTM D 3338/D 3338M-20a | ||
| 70 | Liquid fuels: aviation turbine fuel | Thermo-oxidative stability at 260 °C Deposits on the tube 0 – 4 A, P Pressure drop (0,1 – 200) mmHg |
JFTOT method | ASTM D 3241-24 | |
| 71 | Liquid fuels: aviation turbine fuel | Water separation properties Range 70 – 100 |
Turbidimetric method | ASTM D 3948-22 | |
| 72 | Liquid fuels: aviation turbine fuel | Lubricity Range (0,40 – 0,85) mm |
BOCLE method | ASTM D 5001-25 | |
| 73 | Liquid fuels: aviation turbine fuel | Solid particle content using a portable automatic particle counter Range for particles with a diameter of: ≥ 4 μm (216 – 45061) number of particles ≥ 6 μm (74 – 22483) number of particles ≥ 14 μm (9 – 4105) number of particles ≥ 21 μm (2 – 1444) number of particles ≥ 25 μm (1 – 776) number of particles ≥ 30 μm (1 – 365) number of particles |
Optical method | IP 565-13 | |
| 74 | Liquid fuels: aviation turbine fuel | Hydrogen content (calculated) | ASTM D 3343-22 | ||
| 75 | Liquid fuels: aviation turbine fuel | Anti-icing additive content Range (0,01 – 0,25) %(v/v) |
Refractometric method | ASTM D 5006-25 | |
| 76 | Liquid fuels: aviation turbine fuel | Fatty acid methyl esters (FAME) content Range (10,0 – 100,0) mg/kg |
Infrared spectrometry method | ASTM D 7797-23 | |
| 77 | Liquid fuels: aviation turbine fuel | Appearance | Visual method | NO-91-A258-1:2024 cl. 2.1 | |
| 78 | Liquid fuels: aviation turbine fuel, Other petroleum products: petroleum products with a boiling range 15°C - 370°C | Flash point Range (4,0 – 70,0) °C |
TAG closed cup method | ASTM D 56-22 | |
| 79 | Liquid fuels: aviation turbine fuel | Specific conductivity Range (1 – 800) pS/m |
Conductometric method | ASTM D 2624-24 | |
| 80 | Liquid fuels: aviation turbine fuel, Other petroleum products: petroleum products with a boiling range 100°C - 350°C, petroleum distillates | Kinematic viscosity at (-20) °C Range (2,000 – 8,000) mm2/s |
Capillary method | ASTM D 445-24 | |
| 81 | Liquid fuels: aviation gasoline, aviation turbine fuel, Other petroleum products: petroleum products with a boiling range 15°C - 350°C | Gum content Range (1 – 10) mg/100ml |
Gravimetric method | ASTM D 381-25 | |
| 82 | Liquid fuels: aviation turbine fuel | Reaction of fuel with water and assessment of the interface | Visual method | ASTM D 1094-24 | |
| 83 | Liquid fuels: aviation turbine fuel | Crystallisation temperature [(-75,0) (-42,0)] oC |
Optical method | ASTM D 5972-25 | |
| 84 | Liquid fuels: aviation turbine fuel | Crystallisation temperature [(-62,0) (-42,0)] oC |
Visual method | ASTM D 2386-19 | |
| 85 | Liquid fuels: aviation turbine fuel | Mercaptan sulphur content Range (0,0003 – 0,01) %(m/m) |
Potentiometric titration method | ASTM D 3227-24 | |
| 86 | Liquid fuels: aviation turbine fuel, aviation turbine fuel containing fuel additives | Water separation properties Range 70 – 100 |
Turbidimetric method | ASTM D 7224-23 | |
| 87 | Liquid fuels: aviation turbine fuel | Aromatic hydrocarbon content MAH (10,0 – 25,0) %(m/m) MAH (10,0 – 25,0) %(v/v) DAH (0,1 – 7,0) %(m/m) DAH (0,1 – 6,5) %(v/v) |
High-performance liquid chromatography with refractive index detection (HPLC-RID) | ASTM D 6379-21e1 | |
| 88 | Liquid fuels: aviation turbine fuel | Sum of aromatic hydrocarbons (calculated) | ASTM D 6379-21e1 | ||
| 89 | Liquid fuels: aviation turbine fuel, Other petroleum products: petroleum products with a boiling range 15°C - 350°C | Colour Range (+10) – (+30) on the Saybolt scale |
Visual method | ASTM D 156-23 | |
| 90 | Liquid fuels: aviation turbine fuel | Particulate matter content Range (0,0 – 10,0) mg/l |
Gravimetric method | ASTM D 5452-23 | PN-V-04031:2000 | |
| 91 | Liquid fuels: aviation turbine fuel | Existent gum content Range (1 – 10) mg/100ml |
Gravimetric method | IP 540/08(2019) | |
| 92 | Liquid fuels: aviation turbine fuel | Content of naphthalene hydrocarbons Range (0,08 – 2,0) %(v/v) |
Spectrophotometric method | ASTM D 1840-24 | |
| 93 | Other petroleum products: petroleum products with a boiling range 30°C - 380°C | Bromine number Range (0,1 – 100) g/100 g sample |
Potentiometric titration method | ASTM D 1159-23 | |
| 94 | Other petroleum products: petroleum products with a boiling range of 30°C - 250°C, Chemical products: aromatic hydrocarbons | Colour of the acid extract Range 0 – 14 |
Visual method | ASTM D 848-23 | |
| 95 | Other petroleum products: petroleum products with a boiling range of 30°C - 250°C, Chemical products: aromatic hydrocarbons | Colour Range 1 – 10 |
Visual method | ASTM D 1209-25 | |
| 96 | Other petroleum products: petroleum products with a boiling range of 30°C - 250°C, Chemical products: aromatic hydrocarbons | Acidity | Visual method | ASTM D 847-23 | |
| 97 | Other petroleum products: petroleum products with a boiling range of 30°C - 250°C, Chemical products: aromatic hydrocarbons | Thiophene content Range (0,14 – 2,61) mg/kg |
Gas chromatography with pulsed flame photometric detection (GC-PFPD) | ASTM D 4735-19 | |
| 98 | Other petroleum products: petroleum fractions and/ or products with a boiling range 30°C - 400°C, Chemical products: aromatic hydrocarbons | Chloride content Range (0,3 – 10,0) mg/kg |
Microcoulometric method | UOP 779-08 | |
| 99 | Chemical products: aromatic hydrocarbons, aromatic hydrocarbon fractions, Other petroleum products: light gasoline components | Total sulphur content Range (0,10 – 10,0) mg/kg |
Ultraviolet fluorescence method | ASTM D 7183-23 | |
| 100 | Chemical products: aromatic hydrocarbons | Distillation characteristics including the dry point Range (70,0 – 145,0) °C |
Distillation method | ASTM D 850-21 | |
| 101 | Chemical products: aromatic hydrocarbons | Chloride content Range (1,0 – 25,0) mg/kg |
Microcoulometric method | ASTM D 5808-23 | |
| 102 | Chemical products: aromatic hydrocarbons | Freezing point of benzene Range (5,10 – 5,50) °C |
Visual method | ASTM D 852-24 | |
| 103 | Chemical products: aromatic hydrocarbons | Nitrogen content Range (0,10 – 1,20) mg/kg |
Chemiluminescence method | ASTM D 7184-24 | |
| 104 | Chemical products: aromatic hydrocarbons | Bromine index Range (1,0 – 100,0) (mg Br/100g) |
Coulometric titration method | ASTM D 1492-21 | |
| 105 | Chemical products: monocyclic aromatic hydrocarbons | Content of trace impurities in monocyclic aromatic hydrocarbons Total content of aliphatic impurities (C4 – C10) and individual monocyclic aromatic impurities (C6 – C10) Range (0,0006 – 2,5) %(m/m) Purity of mononuclear aromatic hydrocarbons benzene toluene para-xylene Range 97,60 – 99,99 %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | ASTM D 7504-23 | |
| 106 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Methyl alcohol content Range (0,01– 0,5) %(m/m) |
Gas chromatography with headspace layer analysis and flame ionization detection (HS-GC-FID) | PN-EN 14110:2019-05 | |
| 107 | Liquid fuels: liquid biofuels: bioethanol | Copper content Range (0,07 – 0,20) mg/kg |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-EN 15488:2009 | |
| 108 | Liquid fuels: liquid biofuels: bioethanol | Power Range (80,0 – 100,0) %(v/v) |
Oscillation method | PN-A-79528-3:2007 cl. 5.2 | |
| 109 | Liquid fuels: liquid biofuels: bioethanol | Appearance | Visual method | PN-EN 15769:2010 | |
| 110 | Liquid fuels: liquid biofuels: bioethanol, methanol | Density at 20°C Range (0,780 – 0,870) g/cm3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 111 | Liquid fuels: diesel fuel, liquid biofuels: FAME | Derived cetane number Range 50,0 – 60,0 |
Combustion chamber method | PN-EN 16715:2015-09 | |
| 112 | Liquid fuels: liquid biofuels: bioethanol, motor petrol with bioethanol | Sulfur content Range (5,0 – 20,0)mg/kg |
Ultraviolet fluorescence method | PN-EN 15486:2009 | |
| 113 | Liquid fuels: light heating oil | Butoxybenzene (n-butyl phenyl ether (BPE)) content Range (0,05 – 20,00) mg/l |
Gas chromatography with mass spectrometry detection (GC-MS) | ILIADe 606:2024 procedure B | |
| 114 | Crude oil | Content of organic chlorides in the fraction boiling up to 204°C Range (1 –50) mg/kg Organic chloride content (calculated) |
Microcoulometric titration method | ASTM D 4929-22 Method B | |
| 115 | Water, wastewater | Mercury concentration Range (0,010 – 10,0) μg/l |
Cold vapour atomic fluorescence spectrometry (CVAFS) | PN-EN ISO 17852:2009 | |
| Crude Oil Processing Laboratory PP2 | |||||
| 116 | Liquid fuels: diesel fuel, light heating oil, Crude oil | Fractional composition Range (50 – 380) °C |
Distillation method | PN-EN ISO 3405:2019-05 excluding cl. 9 | ASTM D 86-23aɛ2 | |
| 117 | Liquid fuels: liquid biofuels: diesel fuel with FAME | Fractional composition Range (50 – 380) °C |
Distillation method | PN-EN ISO 3405:2019-05 excluding cl. 9 | |
| 118 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 119 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, heavy heating oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME), Other petroleum products: pyrolysis oil, Crude oil | Density at 15°C Range (630 – 1100) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 120 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME), Other petroleum products: vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 15°C - 500°C, Crude oil | Density at 15°C Range (646 – 1050) kg/m3 |
Hydrometer method | PN-EN ISO 3675:2004 | |
| 121 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, liquid biofuels: diesel fuel with FAME, Other petroleum products: petroleum fractions and/or products with a boiling temperature 20°C - 550°C, road bitumens, industrial bitumens and bituminous products | Flash point Range (40 – 220) °C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 122 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, heavy heating oil, marine fuel, Other petroleum products: vacuum residue (tar), Crude oil | Sulfur content Range (0,03 – 5,00) %(m/m) |
Energy-dispersive X-ray fluorescence spectrometry | PN-EN ISO 8754:2007+Ap1:2014-02 | |
| 123 | Liquid fuels: diesel fuel, light fuel oil | Solvent Red 164 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method B | |
| 124 | Liquid fuels: diesel fuel, light fuel oil | Solvent Red 19 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method A | |
| 125 | Liquid fuels: diesel fuel, liquid biofuels: diesel fuel with FAME | Oxidation stability Range (3 – 100) g/m3 |
Gravimetric method | PN- EN ISO 12205:2011 | |
| 126 | Liquid fuels: diesel fuel, liquid biofuels: diesel fuel with FAME | Lubricity Range (180 – 650) μm |
HFRR method | PN-EN ISO 12156-1:2024-02 | |
| 127 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Penetration Range (20 – 330) * 0,1 mm |
Needle penetration method | PN-EN 1426:2025-02 | |
| 128 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Softening point Range (30 – 110) °C |
Ring and Ball method | PN-EN 1427:2015-08 | |
| 129 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Brittleness temperature at sub-zero temperatures [0 (-30)] °C |
Fraass method | PN-EN 12593:2015-08 | |
| 130 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Paraffin content Range (1,0 – 3,5) %(m/m) |
Distillation method | PN-EN 12606-1:2015-08 | |
| 131 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Solubility Range up to 100,00 %(m/m) |
Gravimetric method | PN-EN 12592:2014-12 | |
| 132 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Resistance to ageing under the influence of heat and air percentage change in mass [(-0,20) (+0,20)] %(m/m) Percentage of retained penetration at 25 °C ( calculated) Change in ring and ball softening point (in °C) (calculated) |
RTFOT method | PN-EN 12607-1:2025-02 | |
| 133 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Resistance to ageing under the influence of heat and air Range percentage change in mass [(-1,5) (+2,0)] %(m/m) |
TFOT method | PN-EN 12607-2:2014-12 | |
| 134 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Water content Range (0 – 25,0) %(v/v) %(V/m) |
Distillation method | ASTM D 95-23ɛ1 | |
| 135 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Dynamic viscosity at 60 °C Range (50 – 8000) Pa.s |
Capillary method | PN-EN 12596:2024-01 | |
| 136 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Stability during storage (calculated) | PN-EN 13399:2017-12 | ||
| 137 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Mass loss after heating Range (0,02 – 0,5) % |
Gravimetric method | PN-EN 13303:2017-10 | |
| 138 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Elastic recovery Range (15 – 98) % |
Ductilometric method | PN-EN 13398:2017-12 | |
| 139 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Density and relative density Range (940 – 1030) kg/m3 |
Pycnometric method | PN-EN 15326+A1:2010 | |
| 140 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Kinematic viscosity at 135°C Range (20 – 2000) mm2/s |
Capillary method | PN-EN 12595:2024-01 | |
| 141 | Other petroleum products: paving bitumens, industrial bitumens and bituminous products | Tensile force Range (1,0 – 10,0) J/cm2 Deformation energy (calculated) |
Ductilometric method | PN-EN 13589:2018-08 | |
| 142 | Crude oil | Water content Range (0 – 1,0) %(v/v) |
Distillation method | PN-EN ISO 9029:2005 | ASTM D 4006-22 | |
| 143 | Crude oil | Density Range (750,0 – 950,0) kg/m3 |
Oscillation method | ASTM D 5002-22 | |
| 144 | Crude oil | Water content Range (0,02 – 2,00) %(m/m) |
Potentiometric titration method | ASTM D 4377-00 (2011) | |
| 145 | Crude oil | Water content Range (0,02 – 5,00) % (m/m or V/V) |
Coulometric titration method | ASTM D 4928-12(2018) | |
| 146 | Crude oil | Fractional composition Range (30 – 300)°C |
Distillation method | GOST 2177-99 Method B | |
| 147 | Crude oil | Fractional composition [(-1) (+400)] °C |
Distillation method | ASTM D 2892-25 | |
| 148 | Crude oil – distillation residue according to ASTM D 2892 | Fractional composition Range (380 – 565) °C |
Distillation method | ASTM D 5236-25 | |
| 149 | Liquid fuels diesel fuel, light heating oil, heavy heating oil, Other petroleum products: pyrolysis oil, Crude oil | Pour point [10 (-50)] °C |
Optical method | PN-EN ISO 3016:2019-06 | ASTM D 97-17b(2022) | |
| 150 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, Other petroleum products: pyrolysis oil, vacuum residue (tar), Crude oil | Kinematic viscosity at 20 °C, 40 °C, 50 °C, 80 °C and 100 °C Range (1,000 – 150,0) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 | ASTM D 445-24 | |
| 151 | Liquid fuels: diesel fuel, Other petroleum products: vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 20°C - 550°C, Crude oil | Carbon residue Range (0,01 – 24) %(m/m) |
Gravimetric method | PN-ISO 6615:2012 | |
| 152 | Liquid fuels: diesel fuel, light heating oil, Other petroleum products: vacuum residue (tar), Crude oil | Total sulfur content Range (0,0150 – 2,00) %(m/m) |
Energy-dispersive X-ray fluorescence spectrometry | ASTM D 4294-24 | |
| 153 | Liquid fuels: heavy heating oil, Other petroleum products: pyrolysis oil, Crude oil | Impurity content Range (0,01 – 0,40) %(m/m) |
Gravimetric method | PN-EN ISO 3735:2001 | ASTM D 473-22 | |
| 154 | Liquid fuels: heavy heating oil, Other petroleum products: pyrolysis oil, vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 80°C - 550°C, road bitumens, industrial bitumens and bituminous products | Flash point Range (90 – 380) oC |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | |
| 155 | Liquid fuels: diesel fuel, light heating oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME), marine oil | Sulfur content Range (3,0 – 500) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 156 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME), Other petroleum products: vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 20°C - 550°C, Crude oil | Carbon residue Range (0,01 – 24,00) %(m/m) |
Gravimetric method | PN-EN ISO 10370:2014-12 | |
| 157 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, liquid biofuels: diesel fuel with FAME, Other petroleum products: pyrolysis oil, vacuum residue (tar), Crude oil | Residue after incineration Range (0,001 – 0,180) %(m/m) |
Gravimetric method | PN-EN ISO 6245:2008 | |
| 158 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Water content Range (30 – 1000) mg/kg Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 159 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Cloud point [10 (- 41)] oC |
Visual method | PN-EN ISO 3015:2019-06 | |
| 160 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Copper strip corrosion Range 1a – 4c (scale) |
Visual method | PN-EN ISO 2160:2004 | |
| 161 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Cold filter plugging point [5 (- 45)] oC |
Optical method | PN-EN 116:2015-09 | |
| 162 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 163 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 164 | Liquid fuels: light heating oil, heavy heating oil, Other petroleum products: vacuum residue (tar) | Gross calorific value Range (26 500 – 46 300) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-C-04062:2018-05 | |
| 165 | Liquid fuels: diesel fuel, light heating oil, liquid biofuels: diesel fuel with FAME, Other petroleum products: vacuum residue (tar) | Density Range (600 – 1100) kg/m3 |
Oscillation method | ASTM D 4052-22 | |
| 166 | Liquid fuels: diesel fuel, light heating oil, heavy heating oil, Other petroleum products: vacuum residue (tar) | Carbon content Range (78 – 88) %(m/m) |
Spectrometry method in the infrared range IR | ASTM D 5291-21 Method D | |
| 167 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Corrosion on a steel rod | Visual method | ASTM D 665-24 | PN-ISO 7120:2011 | |
| 168 | Liquid fuels: heavy heating oil, Other petroleum products: pyrolysis oil, vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 20°C - 550°C, road bitumens, industrial bitumens and bituminous products | Water content Range (0 – 25) %(v/v) |
Distillation method | PN-ISO 3733:2008 | |
| 169 | Liquid fuels: liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Kinematic viscosity at 40 oC Range (1,000 – 150,0) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 | |
| 170 | Liquid fuels: liquid biofuels: diesel fuel with FAME, fatty acid methyl esters (FAME) | Oxidation stability Range (0,1 – 25,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 171 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Sulfated ash content Range (0,005 – 0,25) %(m/m) |
Gravimetric method | PN-ISO 3987:2014-05 | |
| 172 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Oxidation stability Range (0,1 – 14,0) h |
Conductometric method | PN-EN 14112:2021-05 | |
| 173 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Tendency to plug the filter after cooling Range (50 – 720) s |
CSFT method | ASTM D 7501-22 | |
| 174 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Group I metal content Na (1 – 10) mg/kg K (1 – 10) mg/kg Sum of (Na and K) mg/kg (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14538:2008 | |
| 175 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Group II metal content Ca (1 – 10) mg/kg Mg (1,2 – 10) mg/kg Sum of (Ca and Mg) mg/kg (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14538:2008 | |
| 176 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Phosphorus content Range (4 – 20) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14107:2004 | |
| 177 | Liquid fuels: diesel fuel | Manganese content Range (0,5 – 7,0) mg/l |
Inductively coupled plasma atomic emission spectrometry (ICP-OES) | PN-EN 16576:2014-12+Ap1:2017-11 | |
| 178 | Liquid fuels: diesel fuel | Oxidation stability Range (5,0 – 50,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 179 | Liquid fuels: diesel fuel, Other petroleum products: pyrolysis oil, vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 50°C - 570°C | Water content Range (0,003 – 0,100) %(m/m) |
Potentiometric titration method | PN-ISO 6296:2011 | |
| 180 | Liquid fuels: diesel fuel, heavy heating oil, Other petroleum products: pyrolysis oil, vacuum residue (tar), petroleum fractions and/or products with a boiling temperature 20°C - 550°C | Hydrogen sulphide content Range (0,10 – 48,0) mg/kg |
Electrochemical method | IP 570/15(2021) | |
| 181 | Liquid fuels: heavy heating oil, Other petroleum products: vacuum residues | Total sediment content Range (0,01 – 0,50) %(m/m) |
Gravimetric method | PN-ISO 10307-1:2010 | ASTM D 4870-22 | |
| 182 | Liquid fuels: petrol, diesel fuel, light heating oil, heavy heating oil, Other petroleum products: vacuum residue (tar), Lubricants: lubricating base oils | pH of the water extract Range alkaline – acidic (pH value 2,7 –12,4) |
Electrochemical method | PN-C-96060:2019-03 procedure A | |
| 183 | Lubricants: base oils, engine oils, industrial lubricating oils | Viscosity index based on kinematic viscosity at 40 °C and at 100 °C Range (85 – 100) for lubricating oils base (60 – 150) for additive-treated lubricating oils (calculated) |
PN-ISO 2909:2009+Ap1:2010 | ||
| 184 | Lubricants: base oils, engine oils, industrial lubricating oils | Colour Range 0,5 – 8,0 |
Visual method | ASTM D 1500-24 | |
| 185 | Lubricants: base oils, engine oils, industrial lubricating oils | Flash point Range (110 – 280) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | |
| 186 | Lubricants: base oils, engine oils, industrial lubricating oils | Kinematic viscosity at 40°C and 100°C Range (2,600 – 200,0) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 | |
| 187 | Lubricants: base oils, engine oils, industrial lubricating oils | Pour point [(+6) (-30)] °C |
Optical and visual method | PN-EN ISO 3016:2019-06 | |
| 188 | Lubricants: base oils, engine oils, industrial lubricating oils | Acid value Range (0,1 – 5,0) mg KOH/g |
Titrimetric method | PN-ISO 6618:2011 | |
| 189 | Lubricants: base oils, engine oils, industrial lubricating oils | Residue after incineration Range (0,001 – 0,005) %(m/m) |
Gravimetric method | PN-EN ISO 6245:2008 | |
| 190 | Lubricating materials: industrial lubricating oils, Liquid fuels: heavy fuel oil | Water content Range (0,05 – 5,00) %(v/m) |
Distillation method | ASTM D 95-23ɛ1 | |
| 191 | Other petroleum products: slack wax | Oil content Range (0,20 – 15,00) %(m/m) |
Gravimetric method | ASTM D 721-25 | |
| 192 | Other petroleum products: slack wax | Freezing point Range (45 – 65) °C |
Visual method | PN-ISO 2207:2011 | |
| 193 | Wastewater | Metal concentrations Cr, Cd, Pb, Cu, Ni, Zn, Fe, V Range (0,010 – 100) mg/l Co, Ag, Ba, B, Al (0,010 – 50,0) mg/l Na, K, Ca, Mg (1,00 – 1000) mg/l Metal concentration As, Sb (0,010 – 20,0) mg/l |
Inductively coupled plasma atomic emission spectrometry (ICP-OES); Inductively coupled plasma atomic emission spectrometry with hydride generation (HG-ICP-OES) | PN-EN ISO 11885:2009 | |
| 194 | Water, treated wastewater | Metal concentrations Cr, Cd, Cu, Ni, Mn, V (0,010 – 2,00) mg/l Mg, K, Na, Ca (1,00 – 1000) mg/l Zn, Pb, Fe (0,010 – 100) mg/l Ba, Al., Ag (0,010 – 50,0) mg/l Metal concentration As (0,010 – 2,00) mg/l Se, Sb (0.010 – 20,0) mg/l |
Inductively coupled plasma atomic emission spectrometry (ICP-OES); Inductively coupled plasma atomic emission spectrometry with hydride generation (HG-ICP-OES) | PN-EN ISO 11885:2009 | |
| 195 | Water, wastewater | Element concentrations As, Cr, Cd, Pb Range (0,00010 – 0,050) mg/l |
Atomic emission spectrometry with mass spectrometry detection (ICP-MS) | PN-EN ISO 17294-2:2024-04 | |
| 196 | Building materials: gypsum | Na2O, K2O content Na2O (0,010 – 0,500) %(m/m) K2O (0,010 – 0,500) %(m/m) Content of dissolved MgO MgO (0,001 – 0,100) %(m/m) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | VGB-M 701-e/2008 cl. 8.7 | |
| Working Environment Laboratory PP8 | |||||
| 197 | Workplace environment − air | Sampling for the assessment of occupational exposure to: dust agents inhalable fraction respirable fraction metals and their compounds, including inhalable fraction respirable fraction organic substances, including inhalable fraction inorganic substances, including inhalable fraction respirable fraction thoracic fraction |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 198 | Workplace environment − air | Sampling for the assessment of occupational exposure to: organic substances, inorganic substances, including inhalable fraction |
Stationary method | PN-Z-04008-7:2002+Az1:2004 | |
| 199 | Workplace environment − air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 200 | Workplace environment − air | Ethylene glycol concentration/content Range (0,83 – 333,3)mg/m3 Range (0,025 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-88/Z-04203.02 | |
| 201 | Workplace environment − air | Concentration/content of buta-1,3-diene Range (0,22 – 4,44) mg/m3 Range (0,00098 – 0,02) mg in the sample Range (0,10 – 1,98) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04438:2021-07 | |
| 202 | Workplace environment − air | NN-Dimethylformamide concentration/content Range (1,00 – 333,3) mg/m3 Range (0,03 – 1,00) mg in the sample Range (0,33 – 109,9) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04209.02 | |
| 203 | Workplace environment − air | Ethylene oxide concentration/content Range (0,07 – 2,13) mg/m3 Range (0,002 – 0,048) mg in the sample Range (0,04 – 1,17) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04300:2002 | |
| 204 | Workplace environment − air | Extraction naphtha concentration/content Range (2,08 – 1041,7) mg/m3 Range (0,15 – 7,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134.02 | |
| 205 | Workplace environment − air | Phenol concentration/content Range (0,50 – 35,00) mg/m3 Range (0,002 – 0,070) mg in the sample |
Spectrophotometric method | PN-Z-04044:1970 | |
| 206 | Workplace environment − air | Carbon monoxide concentration Range (2,3 – 232,4) mg/m3 Range (2,0 – 200,0) ppm |
Electrochemical method | Method No. 213 issue 1 of 08.09.2025 | |
| 207 | Workplace environment − air | Exposure index (calculated) | Method No. 213 issue 1 of 08.09.2025 | ||
| 208 | Workplace environment − air | Methanol concentration/content Range (0,05 – 1,0) mg in the sample Range (10,0 – 666,7) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2014, No. 3(81), pp. 89 – 101 | |
| 209 | Workplace environment − air | Concentration/content of propan-2-ol Range (11,11 – 2400) mg/m3 Range (0,10 – 16,25) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment 2020, No. 1(103), pp. 159 – 169 | |
| 210 | Workplace environment − air | Concentration/content of highly refined mineral oils, excluding metalworking fluids Range (0,14 – 10,00) mg/m3 Range (0,100 – 7,200) mg in the sample |
Spectrophotometric method | PN-Z-04108-06:2006+Az1:2009 | |
| 211 | Workplace environment − air | Concentration of organic substances butane (190 – 6080) mg/m3 propane (144 – 4608) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Method No. 045 issue 3 of 19.02.2026 | |
| 212 | Workplace environment − air | Concentration/content of butane Range (0,4 – 14,5) mg in the sample Range (133,3 – 9333) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-1:2012 | |
| 213 | Workplace environment − air | Propane concentration/content Range (0,5 – 12,5) mg in the sample Range (166,7 – 4166) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04252-2:2012 | |
| 214 | Workplace environment − air | Concentration of propene Range (200 – 18000) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04381:2010 | |
| 215 | Workplace environment − air | Concentration/content of organic substances Acetone (0,1 – 10) mg in the sample Range (3,33 – 3333,3) mg/m3 Butan-2-one (0,036 – 9,0) mg in the sample (3,00 – 1800,0) mg/m3 Butane (0,78 – 3888,9) mg/m3 (0,056 – 7,000) mg in the sample Ethylbenzene (0,016 – 4,0) mg in the sample (1,33 – 800) mg/m3 Benzene (0,0015 – 0,15) mg in the sample (0,05 – 5,0) mg/m3 (0,02 – 1,54) ppm Hexane (0,008 – 2,0) mg in the sample (0,67 – 200,0) mg/m3 Cyclohexane (0,028 – 7,0) mg in the sample (2,33 – 2333,3) mg/m3 Methylcyclohexane (0,040 – 10,0) mg in the sample (3,33 – 6666,7) mg/m3 Heptane (0,040 – 10,0) mg in the sample (3,33 – 4000,0) mg/m3 Xylene - mixture of isomers (1,2-; 1,3-; 1,4-) (0,008 – 2,0) mg in the sample (0,67 – 666,7) mg/m3 Cumene (0,008 – 2,0) mg in the sample (0,67 – 666,7) mg/m3 Octane (0,040 – 10,0) mg in the sample (3,33 – 4000,0) mg/m3 Toluene (0,080 – 2,0) mg in the sample (0,67 – 66,7) mg/m3 Ethanol (0,1 – 10) mg in the sample (3,33 – 3333,3) mg/m3 Isopentane (0,04 – 10) mg in the sample (3,33 – 6666,7) mg/m3 Pentane (0,04 – 10) mg in the sample (3,33 – 6666,7) mg/m3 tert-Butyl methyl ether (0,008 – 4) mg in the sample (1,33 – 800,0) mg/m3 |
Gas chromatography with flame ionization detection (GC-FID) | Method No. 031 issue 5 of 20.02.2026 | |
| 216 | Workplace environment − air | Chlorine concentration/content Range (0,05 – 5,00) mg/m3 Range (0,0002 – 0,0050) mg in the sample |
Spectrophotometric method | PN-75/Z-04037/03 | |
| 217 | Workplace environment − air | Ammonia concentration/content Range (1,20 – 60,00) mg/m3 Range (0,006 – 0,300) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 218 | Workplace environment − air | Hydrogen fluoride concentration/content Range (0,15 – 2,25) mg/m3 Range (0,008 – 0,113) mg in the sample |
Spectrophotometric method | PN-82/Z-04093.03 | |
| 219 | Workplace environment − air | Formaldehyde concentration/content Range (0,048 – 5,33) mg/m3 Range (0,0008 – 0,040) mg in the sample |
Spectrophotometric method | PN-76/Z-04045.02 | |
| 220 | Workplace environment − air | Concentration/content of 2-furaldehyde Range (1,00 – 50,00) mg/m3 Range (0,005 – 0,250) mg in the sample |
Spectrophotometric method | PN-71/Z-04058 | |
| 221 | Workplace environment − air | Ozone concentration/content Range (0,0125 – 0,3000) mg/m3 Range (0,0005 – 0,0120) mg in the sample |
Spectrophotometric method | PN-Z-04007-2:1994 | |
| 222 | Workplace environment − air | Nitrogen monoxide concentration/content Range (0,22 – 23,1) mg/m3 Range (0,18 – 18,6) ppm Range (0,001 – 0,104) mg in the sample |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 223 | Workplace environment − air | Nitrogen dioxide concentration/content Range (0,07 – 3,56) mg/m3 Range (0,0003 – 0,016) mg in the sample Range (0,04 – 1,86) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 224 | Workplace environment − air | Sulphur dioxide concentration/content Range (0,12 – 6,00) mg/m3 Range (0,0012 – 0,0600) mg in the sample Range (0,05 – 2,26) ppm |
Spectrophotometric method | PN-Z-04015-12:1996+Ap1:2001 | |
| 225 | Workplace environment − air | Concentration/content of carbon disulphide Range (1,0 – 14,0) mg/m3 Range (0,010 – 0,140) mg in the sample |
Spectrophotometric method | PN-85/Z-04015.10 | |
| 226 | Workplace environment − air | Hydrogen sulphide concentration/content Range (0,20 – 28,00) mg/m3 Range (0,002 – 0,280) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 227 | Workplace environment − air | Concentration/content of chromium (VI) compounds - calculated as Cr (VI) Range (0,00038 – 0,011) mg/m3 Range (0,0008 – 0,021) mg in the sample |
Spectrophotometric method | PN-87/Z-04126/02 | |
| 228 | Workplace environment − air | Acetic acid concentration/content Range (0,83 – 100,00) mg/m3 Range (0,025 – 1,500) mg in the sample Range (0,33 – 40,13) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | |
| 229 | Workplace environment − air | Hydrogen chloride concentration/content Range (0,50 –20,00) mg/m3 Range (0,20 – 8,00) mg in the sample |
Spectrophotometric method | PN-Z-04450:2014-08 | |
| 230 | Workplace environment − air | Concentration/content of crystalline silica (quartz, cristobalite) respirable fraction Range (0,005 – 0,988) mg/m3 Range (0,005 – 0,400) mg in the sample |
Fourier transform infrared spectrometry (FT-IR) | Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130 | |
| 231 | Workplace environment − air | Concentration/content of harmful dust agents - inhalable fraction dusts not classified according to toxicity wood dusts flour dusts petroleum bitumen Range (0,08 – 40,83) mg/m3 Range (0,06 – 2,45) mg in the sample |
Gravimetric method | PN-Z-04507:2022-05+Ap1:2022-08 | |
| 232 | Workplace environment − air | Concentration/content of chloroethene Range (0,11 – 11,11) mg/m3 Range (0,0020 – 0,200) mg in the sample Range (0,04 – 4,28) ppm |
Gas chromatography with flame ionization detection (GC-FID) | Method 159 issue 3 of 14.12.2020 | |
| 233 | Workplace environment − air | Concentration/content of 1,2-dichloroethane Range (0,53 – 55,56) mg/m3 Range (0,010 – 1,000) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Method 159 issue 3 of 14.12.2020 | |
| 234 | Workplace environment − air | Tetrachloroethene concentration/content Range (4,0 – 200) mg/m3 Range (0,040 – 2,00) mg in the sample Range (0,58 – 29,1) ppm |
Gas chromatography with flame ionization detection (GC-FID) | Method 159 issue 3 of 14.12.2020 | |
| 235 | Workplace environment − air | Concentration/content of chloroethane Range (6,67 – 2666,7) mg/m3 Range (0,020 – 2,000) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Method 159 issue 3 of 14.12.2020 | |
| 236 | Workplace environment − emergency electric lighting | Illuminance Range (0,5 – 500) lx |
Direct measurement method | PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard | |
| 237 | Workplace environment − emergency electric lighting | Ratio of minimum to maximum illuminance (calculated) | PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard | ||
| 238 | Workplace environment − emergency electric lighting | Illuminance uniformity for the high-risk zone (calculated) | PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard | ||
| 239 | Workplace environment − emergency electric lighting | Closing time Range (1 – 80) s |
Direct measurement method | PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard | |
| 240 | Workplace environment − emergency electric lighting | Minimum duration of lighting operation Range (1 – 3600) s |
Direct measurement method | PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard | |
| 241 | Workplace environment − indoor electric lighting | Illuminance Range (5 – 5 000) lx |
Direct measurement method | Method 032 issue 7 of 19.02.2026 | |
| 242 | Workplace environment − indoor electric lighting | Illuminance uniformity (calculated) | Method 032 issue 7 of 19.02.2026 | ||
| 243 | Workplace environment − outdoor electric lighting | Illuminance Range (5 – 500) lx |
Direct measurement method | Method 032 issue 7 of 19.02.2026 | |
| 244 | Workplace environment − outdoor electric lighting | Uniformity of lighting (calculated), Variation in illuminance (calculated) | Method 032 issue 7 of 19.02.2026 | ||
| 245 | Workplace environment − moderate microclimate | Air temperature Range (10 – 40) oC Black globe temperature Range (10 - 40) oC Air humidity Range (25 – 75) % Air velocity Range (0,15 – 10) m/s |
Direct measurement method | PN-EN ISO 7730:2006+Ap1:2014 | |
| 246 | Workplace environment − moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006+Ap1:2014 | ||
| 247 | Workplace environment − hot microclimate | Air temperature Range (20 – 40) oC Natural wet bulb temperature Range (20 – 40) oC Black globe temperature Range (20 – 40) oC |
Direct measurement method | PN-EN ISO 7243:2018-01+Ap2:2020-04 | |
| 248 | Workplace environment − hot microclimate | WBGT, WBGTeff index (calculated) | PN-EN ISO 7243:2018-01+Ap2:2020-04 | ||
| 249 | Workplace environment − whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,10 – 50) m/s2 Daily exposure, expressed as the energy-equivalent for 8 hours of the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components, taking into account the relevant factors (1.4awx, 1.4awy, awz) Exposure lasting 30 minutes or less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components, taking into account the relevant factors (1.4awx, 1.4awy, awz) (calculated) |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 250 | Workplace environment - hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,20 – 100) m/s2 Daily exposure, expressed as the energy equivalent for 8 hours of action of the vector sum of r.m.s. frequency-corrected vibration accelerations, determined for three directional components (ahwx, ahwy, ahwz) Exposure lasting 30 minutes and less, expressed as the vector sum of r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | |
| 251 | Workplace environment − noise | A-weighted equivalent sound level Maximum A-weighted sound level Range (34 – 139) dB C-weighted peak sound pressure level Range (34 – 139) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | |
| 252 | Workplace environment − noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | ||
| 253 | Workplace environment - electromagnetic field in the workspace during the use of power systems and AC electrical supply installations in the power industry | Electric field strength: in the frequency range 50 Hz Range (0,1 – 20) kV/m Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | |
| 254 | Workplace environment - electromagnetic field in the workspace during the use of power systems and AC electrical supply installations in the power industry | Magnetic flux density: in the frequency range 50 Hz Range 1 μT – 10 mT Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | |
| 255 | Workplace environment - electromagnetic field in the workspace during the use of power systems and AC electrical supply installations in the power industry | Magnetic field strength at a frequency of 50 Hz (calculated) Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | ||
| 256 | Workplace environment − air | Concentration/content of nickel compounds calculated as Ni – inhalable fraction Range (0,0009 – 0,16) mg/m3 Range (0,001 – 0,12) mg in the sample – respirable fraction Range (0,0006 – 0,11) mg/m3 Range (0,001 – 0,12) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | Principles and Methods of Assessing the Working Environment 2021, No. 4 (110), pp. 179–189 | |
| 257 | Workplace environment − air | Metallic nickel concentration/content Range (0,014 – 0,55) mg/m3 Range (0,010 – 0,400) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019-10 | |
| 258 | Workplace environment − air | Concentration/content of lead and its inorganic compounds, excluding lead (II) arsenate (V) and lead (II) chromate (VI) calculated as Pb inhalable fraction Range (0,0035 – 0,185) mg/m3 Range (0,0025 – 0,100) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04487:2017-10 | |
| 259 | Workplace environment − air | Concentration/content of manganese and its inorganic compounds expressed as Mn inhalable fraction Range (0,008 – 0,444) mg/m3 Range (0,006 – 0,320) mg in the sample respirable fraction Range (0,001 – 0,148) mg/m3 Range (0,0015 – 0,1600) mg in the sample |
Atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10+Ap:1:2015-12 | |
| 260 | Workplace environment − air | Concentration/content of metallic chromium, chromium compounds: chromium (II), chromium (III), chromium (VI) – calculated as Cr Range (0,017 – 1,389) mg/m3 Range (0,012 – 1,000) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04434:2011 | |
| 261 | Workplace environment − air | Concentration/content of iron oxides calculated as Fe iron(III) oxide iron(II) oxide triiron tetraoxide respirable fraction Range (0,23 – 6,94) mg/m3 Range (0,125 – 3,750) mg in the sample inhalable fraction Range (0,35 – 10,42) mg/m3 Range (0,25 – 7,50) mg in the sample |
Atomic absorption spectrometry (FAAS) | PN-Z-04469:2025-02 | |
| 262 | Workplace environment − air | Potassium hydroxide concentration/content Range (0,02 –2,00) mg/m3 Range (0,014 –1,435) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 263 | Workplace environment − air | Sodium hydroxide concentration/content Range (0,012 – 2,420) mg/m3 Range (0,0087 – 1,7400) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 264 | Workplace environment − air | Concentration/content of cobalt and its inorganic compounds calculated as Co Range (0,002 – 0,042) mg/m3 Range (0,0013 – 0,0300) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04291:2003 | |
| Chromatography Laboratory PP3 | |||||
| 265 | Gaseous fuels: liquefied petroleum gases, LPG | Motor octane number (MON) (calculated) | PN-EN 589:2024-08 Annex B | ||
| 266 | Gaseous fuels: liquefied petroleum gases, LPG | Total sulphur content Range (1,0 – 55,0) mg/kg Range (0,0001 – 0,0055) %(m/m) |
Ultraviolet fluorescence method | ASTM D 6667-21 | |
| 267 | Gaseous fuels: liquefied petroleum gases, LPG | Vapour pressure estimated at the temperature 40 oC (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | PN-EN 589:2024-08 Annex C | ||
| 268 | Gaseous fuels: liquefied petroleum gases, LPG | Temperature at which the estimated relative vapour pressure is not less than 150 kPa (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | PN-EN 589:2019-04 Annex C | ||
| 269 | Gaseous fuels: liquefied petroleum gases, LPG | Vapour pressure estimated at the temperature (-10)°C, (-5)°C, 0°C, 10°C, 20°C (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | PN-EN 589:2024-08 Annex C | ||
| 270 | Gaseous fuels: liquefied petroleum gases, LPG | Hydrocarbon composition Range (0,1 – 100,0) %(m/m) Range (0,1 – 100,0) %(mol) |
Gas chromatography with flame ionization detection (GC-FID) | PN-ISO 7941:1993+Ap1:2002 | PN-EN 27941:2015-12 | |
| 271 | Gaseous fuels: liquefied petroleum gases, LPG | Total diene content Range (0,1 – 2,1) %(m/m) Range (0,1 – 2,0) %(mol) |
Gas chromatography with flame ionization detection (GC-FID) | PN-ISO 7941:1993+Ap1:2002 | PN-EN 27941:2015-12 | |
| 272 | Gaseous fuels: liquefied petroleum gases, LPG | Copper strip corrosion corrosion class (1 – 4) |
Visual method | PN-EN ISO 6251:2001 | |
| 273 | Gaseous fuels: liquefied petroleum gases, LPG | Presence of hydrogen sulfide | Visual method | PN-EN ISO 8819:2000 | |
| 274 | Gaseous fuels: liquefied petroleum gases, LPG | Presence of water | Visual method | PN-EN 15469:2009 | |
| 275 | Gaseous fuels: liquefied petroleum gases, LPG | Odour | Organoleptic method | PN-EN 589:2024-08 Annex A | |
| 276 | Gaseous fuels: liquefied petroleum gases, LPG | Net calorific value (calculated) | PN-C-96008:1998 cl. 4.4.8 | ||
| 277 | Gaseous fuels: liquefied petroleum gases, LPG | Absolute vapour pressure at temp. (-15) °C (calculated) | PN-C-96008:1998 cl. 4.4.10 | ||
| 278 | Gaseous fuels: liquefied petroleum gases, LPG | Absolute vapour pressure at temp. 40 °C (calculated) | PN-C-96008:1998 cl. 4.4.10 | ||
| 279 | Gaseous fuels: liquefied petroleum gases, LPG | Absolute vapour pressure at temp. 70 °C (calculated) | PN-C-96008:1998 cl. 4.4.10 | ||
| 280 | Gaseous fuels: liquefied petroleum gases, LPG | Density at temp. 15,6 °C (calculated) | PN-C-96008:1998 cl. 4.4.9 | ||
| 281 | Gaseous fuels: liquefied petroleum gases, LPG | Soluble residue Range (5 – 100) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 15470:2017-08 | |
| 282 | Gaseous fuels: liquefied petroleum gases, LPG | Total diene content Range (0,01 – 0,50) %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | DIN 51619:2004-02 | |
| 283 | Gaseous fuels: liquefied petroleum gases, LPG | 1,3-butadiene content Range (0,01 – 0,50) %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | DIN 51619:2004-02 | |
| 284 | Gaseous fuels: liquefied petroleum gases, LPG | Hydrocarbon composition Range (0,10 – 100,00) %(m/m) for each of the components |
Gas chromatography with flame ionization detection (GC-FID) | DIN 51619:2004-02 | |
| 285 | Gaseous fuels: liquefied petroleum gases | Presence of hydrogen sulfide | Visual method | PN-C-96008:1998 cl. 4.4.2 | |
| 286 | Gaseous fuels: liquefied petroleum gases | Mineral oil content Range (0,0003 – 0,0050) %(m/m) |
Gravimetric method | PN-C-96008:1998 cl. 4.4.4 | |
| 287 | Gaseous fuels: liquefied petroleum gases | Presence of water | Visual method | PN-C-96008:1998 cl. 4.4.5 | |
| 288 | Gaseous fuels: liquefied petroleum gases | Presence of ammonia | Visual method | PN-C-96008:1998 cl. 4.4.6 | |
| 289 | Gaseous fuels: gases from technological processes: fuel gases, hydrogen gases, post-oxidation gases, hydrocarbon gases | Detailed composition Hydrocarbons from C1 to C6 Range (0,10 – 99,90) % (mol/mol) Oxygen (0,10 – 20,00) %(mol/mol) Nitrogen (0,10 – 90,00) %(mol/mol) CO2 (0,10 – 45,00) %(mol/mol) CO (0,10 – 1,00) %(mol/mol) H2 (0,10 – 99,70) %(mol/mol) |
Gas chromatography with flame ionization and thermal conductivity detection (GC-FID/TCD) | UOP 539-12 | |
| 290 | Gaseous fuels: gases from technological processes: post-oxidation gases, hydrocarbon gases | Elemental carbon content (calculated) | Method 103 issue 3 of 07.01.2022 | ||
| 291 | Gaseous fuels: gases from technological processes: post-oxidation gases, hydrocarbon gases | Net calorific value (calculated) | PN-EN ISO 6976:2016-11 | ||
| 292 | Gaseous fuels: gases from technological processes: post-oxidation gases, hydrocarbon gases | Density (calculated) | PN-EN ISO 6976:2016-11 | ||
| 293 | Gaseous fuels: natural gas | Hydrocarbon composition Range (0,0002 – 99,0000) %mol |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 294 | Gaseous fuels: natural gas | Nitrogen content Range (0,05 – 5,00) %mol |
Gas chromatography with thermal conductivity detection (GC-TCD) | ASTM D 1946-24 | |
| 295 | Gaseous fuels: natural gas | Carbon dioxide content Range (0,0010 – 1,0000) %mol |
Gas chromatography with thermal conductivity detection (GC-TCD) | Method 048 cl. 1.1 issue 4 of 27.12.2023 | |
| 296 | Gaseous fuels: natural gas | Density (calculated) | PN-EN ISO 6976:2016-11 | ||
| 297 | Gaseous fuels: natural gas | Net calorific value (calculated) | PN-EN ISO 6976:2016-11 | ||
| 298 | Gaseous fuels: fuel gas | Hydrocarbon composition Range (0,01 – 99,00) %mol |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 299 | Gaseous fuels: fuel gas | Nitrogen content Range (0,05 – 10,00) %mol |
Gas chromatography with thermal conductivity detection (GC-TCD) | ASTM D 1946-24 | |
| 300 | Gaseous fuels: fuel gas | Hydrogen content Range (0,01 – 60,00) %mol |
Gas chromatography with thermal conductivity detection (GC-TCD) | ASTM D 1946-24 | |
| 301 | Gaseous fuels: fuel gas | Density (calculated) | PN-EN ISO 6976:2016-11 | ||
| 302 | Gaseous fuels: fuel gas | Net calorific value (calculated) | PN-EN ISO 6976:2016-11 | ||
| 303 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Fatty acid methyl esters (FAME) content Sum of esters (90,0 – 100,0) %(m/m) Linolenic acid methyl ester content (1,0 – 15,0) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 14103:2020-06 | |
| 304 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Content of the sum of polyunsaturated fatty acid methyl esters (≥4 double bonds) (PUFA) Range (0,30 – 3,00) %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 15779+A1:2013-12 | |
| 305 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Content of free and total glycerol and of mono-, di- and triacylglycerols Monoacylglycerols Range (0,05 – 1,25) % (m/m) Diacylglycerols (0,05 – 0,50) %(m/m) Triacylglycerols (0,05 – 0,50) %(m/m) Free glycerol (0,001 – 0,050) %(m/m) Total glycerol (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 14105:2025-04 | |
| 306 | Liquid fuels: liquid biofuels: bioethanol | Content of higher alcohols, methanol and other impurities methanol (0,010 – 3,000) %(m/m) Higher alcohols (C3-C5) Range (0,010 – 2,500) %(m/m) ethanol together with higher alcohols – above 95,000 %(m/m) other impurities (0,010 – 2,000) %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 15721:2013-10 procedure A | |
| 307 | Water, wastewater | Concentration of volatile aromatic hydrocarbons benzene (3,0 – 14000) μg/l toluene (3,0 – 14000) μg/l ethylbenzene (3,0 – 14000) μg/l (m+p)-xylene (3,0 – 27000) μg/l o-xylene (3,0 – 14000) μg/l cumene (3,0 – 14000) μg/l Sum of xylenes, sum of BTEX (calculated) |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-ISO 11423-1:2002 | |
| 308 | Wastewater | Mineral oil index Range (0,10 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 309 | Workplace environment – air samples collected on filters and sorbent tubes | Polycyclic aromatic hydrocarbons (PAH) content anthracene (0,005 – 0,500) μg in the sample benzo(a)anthracene Range (0,010 – 1,000) μg in the sample chrysene (0,020 – 2,000) μg in the sample benzo(b)fluoranthene (0,010 – 1,000) μg in the sample benzo(k)fluoranthene (0,010 – 1,000) μg in the sample benzo(a)pyrene (0,020 – 2,000) μg in the sample dibenzo(ah)anthracene (0,040 – 4,000) μg in the sample benzo(ghi)perylene (0,020 – 2,000) μg in the sample indeno (123cd)pyrene (0,020 – 0,100) μg in the sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-5:2006 | |
| Płock Logistics Team LL/P | |||||
| 310 | Liquid fuels: diesel fuel, petrol, light fuel oil, heavy fuel oil, aviation turbine fuel, liquid biofuel: fatty acid methyl esters (FAME), bioethanol | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.5, 8.3.1.8, 8.3.2, 8.7,8.8, 10.6, 10.7 | ||
| 311 | Liquid fuels: diesel fuel, petrol | Sampling from a dispenser for chemical and physical testing | PN-EN 14275:2013-06 | ||
| 312 | Gaseous fuels: liquefied petroleum gases, LPG | Sampling for chemical and physical testing | PN-EN ISO 4257:2004 ZN/MG/CN-18:2007 | ||
| 313 | Wastewater | Sampling for chemical and physical testing Temperature of the collected wastewater sample Range (2,0 – 50,0) °C |
Manual method | PN-ISO 5667-10:2021-11 Method No. 111 issue 5 of 01.07.2020 | |
| 314 | Wastewater | pH Range 2,0 – 12,0 Regulated area: Tests performed outside the laboratory premises |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 315 | Gaseous fuels: hydrogen (automotive) | Sampling for chemical and physical testing from tanks from the refuelling station from pipelines in the installation |
ASTM D 7606-24a | ISO 21087:2019-06 cl. 8 | ISO 19880-1:2020-03 Annex K cl. K1, K2, K3 | ISO 19880-09:2024 excluding Annex A, C, D, E, F | ||
| 316 | Gaseous fuels: hydrogen (automotive) | Sampling for particulate matter content from tanks from the refuelling station from pipelines |
ASTM D 7650-21 excluding 7.9 | ISO 21087:2019-06 cl. 8 | ISO 19880-1:2020-03 Annex K cl. K1, K2, K7 excluding cl. K.7.1 | ISO 19880-9:2024-07 excluding Annex A, B, C, E, F | ||
| Włocławek Logistics Team LL/W | |||||
| 317 | Wastewater | Sampling for chemical and physical testing Temperature of the collected sample Range: (2,0 – 50,0) °C |
Manual method | PN-ISO 5667-10:2021-11 Method No. 111 issue 5 of 01.07.2020 | |
| 318 | Wastewater | Sampling for chemical and physical testing | Automatic method | PN-ISO 5667-10:2021-11 | |
| 319 | Wastewater | pH Range 2,0 – 12,0 Regulated area: Tests performed outside the laboratory premises |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 320 | Surface waters | Sampling for chemical and physical testing Temperature of the sample taken Range (2,0 – 50,0) °C |
PN-EN ISO 5667-6:2016-12 excluding 7.6, 9.4 Method No. 111 issue 5 of 01.07.2020 | ||
| 321 | Surface waters | pH Range (2,0 – 12,0) Regulated area: Tests performed outside the laboratory premises |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 322 | Surface waters | Electrical conductivity Range (0,100 – 20,00) mS/cm Regulated area: Tests performed outside the laboratory premises |
Conductometric method | PN-EN 27888:1999 | |
| 323 | Groundwater | Sampling for chemical and physical testing Temperature of the sample taken Range (2,0 – 50,0) °C |
PN-ISO 5667-11:2017-10 excluding cl. 4.2.2, 4.2.4, 4.3, 6.2, 6.3 Method No. 111 issue 5 of 01.07.2020 | ||
| 324 | Groundwater | pH Range 2,0 – 12,0 Regulated area: Tests performed outside the laboratory premises |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 325 | Groundwater | Electrical conductivity Range (0,100 – 20,00) mS/cm Regulated area: Tests performed outside the laboratory premises |
Conductometric method | PN-EN 27888:1999 | |
| 326 | Waters, including drinking waters | Sampling for microbiological testing | PN-EN ISO 19458:2007 excluding cl. 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6 | ||
| 327 | Drinking water | Sampling for chemical and physical testing Temperature of the sample taken Range (2,0 – 30,0) °C |
PN-ISO 5667-5:2017-10 Method No. 111 issue 5 of 01.07.2020 | ||
| 328 | Water | Free chlorine concentration Range: free chlorine (0,20 – 1,6) mg/l | Colorimetric method | Method No. 195, issue 1 of 26.09.2019; HACH test No. 8021 (free chlorine) | |
| 329 | Gaseous fuel: hydrogen (automotive) | Sampling for chemical and physical testing from tanks from the refuelling station from pipelines in the installation |
ASTM D 7606-24a | ISO 21087:2019-06 cl. 8 | ISO 19880-1:2020-03 Annex K cl. K1, K2, K3 | ISO 19880-09:2024 excluding Annex A, C, D, E, F | ||
| 330 | Gaseous fuel: hydrogen (automotive) | Sampling for particulate matter content from tanks from the refuelling station from pipelines |
ASTM D 7650-21 excluding 7.9 | ISO 21087:2019-06 cl. 8 | ISO 19880-1:2020-03 Annex K cl. K1, K2, K7 excluding cl. K.7.1 | ISO 19880-9:2024-07 excluding Annex A, B, C, E, F | ||
| PTA Laboratory TT5 | |||||
| 331 | Chemical products: terephthalic acid (PTA) | Alkaline transparency Range (87,4 – 99,6)% |
Spectrophotometric method | Method No. 117 issue 4 of 05.12.2025 | |
| 332 | Chemical products: terephthalic acid (PTA) | Element content Ca (0,01 – 1,00) mg/kg Co (0,01 – 1,00) mg/kg Cr (0,01 – 1,00) mg/kg Fe (0,01 – 1,00) mg/kg Na (0,01 – 1,00) mg/kg Ni (0,01 – 1,00) mg/kg Mn (0,01 – 1,00) mg/kg Mo (0,01 – 1,00) mg/kg Total content of elements (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | Method 118 issue 7 of 07.04.2026 | |
| 333 | Chemical products: terephthalic acid (PTA) | Appearance | Visual method | Method No. 122 issue 4 of 05.12.2025 | |
| 334 | Chemical products: terephthalic acid (PTA) | Colour on the Pt-Co scale Range 5 – 15 |
Visual method | Method No. 126 issue 4 of 05.12.2025 | |
| 335 | Chemical products: terephthalic acid (PTA) | Water content Range (0,10 – 1,00) %(m/m) |
Potentiometric titration method | Method No. 127 issue 4 of 05.12.2025 | |
| 336 | Chemical products: terephthalic acid (PTA) | Colour b Range (0,1 – 2,0) |
Spectrophotometric method | Method No. 128 issue 4 of 05.12.2025 | |
| 337 | Chemical products: terephthalic acid (PTA) | Delta Y Range (1,0 – 10,0) |
Spectrophotometric method | Method No. 129 issue 4 of 05.12.2025 | |
| 338 | Chemical products: terephthalic acid (PTA) | Acid value Range (673 – 677) mg KOH/g |
Titrimetric method | Method No. 130 issue 4 of 05.12.2025 | |
| 339 | Chemical products: terephthalic acid (PTA) | Residue after incineration Range (1 – 5) mg/kg |
Gravimetric method | Method No. 132 issue 3 of 12.01.2023 | |
| 340 | Chemical products: terephthalic acid (PTA) | Dp50 value Range (70 – 130) μm |
Sieve method (and calculation) | Method No. 133 issue 4 of 05.12.2025 | |
| 341 | Water, wastewater | Total organic carbon content Range (0,3 – 24000) mg/l |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| Laboratory Service Point in Wrocław PP7/5 | |||||
| 342 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, Liquid biofuels: fatty acid methyl esters, bioethanol | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7, 8.8,9.8, 10.6, 10.7 | ||
| 343 | Liquid fuels: unleaded petrol, diesel fuel | Sampling from a dispenser for chemical and physical testing | PN-EN 14275:2013-06 | ||
| 344 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Sulfur content Range (3,0 – 60) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 345 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Density at 15°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 346 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Fractional composition Range (30,0 – 370,0) oC |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 347 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 348 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 349 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) %(v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 350 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (40,0 – 90,0) oC |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 351 | Liquid fuels: diesel fuel, light fuel oil | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 352 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 353 | Liquid fuels: diesel fuel, light fuel oil | Fatty acid methyl esters (FAME) content Range (3,0 – 20,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 354 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Cloud point Range [(- 20) – 0] °C |
Optical method | PN-EN ISO 3015:2019-06 | |
| 355 | Liquid fuels: diesel fuel | Oxidation stability Range (5,0 – 48,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 356 | Liquid fuels: diesel fuel | Cold filter plugging point Range [(- 40) – 0] °C |
Optical method | PN-EN 116:2015-09 | |
| 357 | Liquid fuels: diesel fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 358 | Liquid fuels: light fuel oil | Pour point [(- 45) (-15)] °C |
Optical method | PN-EN ISO 3016:2019-06 | |
| 359 | Liquid fuels: light fuel oil | Solvent Red 19 dye content Range (1,0 – 10,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method A | |
| 360 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Sulfur content Range (3,0 – 10,0) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 361 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Cold filter plugging point Range [(- 20) – 0] °C |
Optical method | PN-EN 116:2015-09 | |
| 362 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 363 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Density at 15 °C Range (850 – 900) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 364 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Tendency to plug the filter after cooling Range (50 – 720) s |
Filtration after cooling method | ASTM D 7501-22 | |
| 365 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Oxidation stability Range (1,0 – 16,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 366 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 367 | Liquid fuels: liquid biofuels: bioethanol | Power Range (95,0 – 100,0) %(v/v) |
Oscillation method | PN-A-79528-3:2007 cl. 5.2 | |
| 368 | Liquid fuels: liquid biofuels: bioethanol | Density at 20°C Range (789,0 – 830,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| Laboratory Service Point in Wrocław PP7/5 (technical activity) | |||||
| 369 | Liquid fuels: unleaded petrol | Motor octane number MON Range 80,0 – 90,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| Refinery Products Laboratory in Trzebinia PP6 | |||||
| 370 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding cl. 8.3.1.3- 8.3.1.5, 8.3.1.8, 8.3.2, 8.5 - 8.9, 9.8, 10.6, 10.7 | ||
| 371 | Liquid fuels: light fuel oil, heavy fuel oil, Lubricating materials: engine oil, industrial lubricating oils | Pour point Range (–38 – 40) °C |
Optical method, visual method | PN-EN ISO 3016:2019-06 | ASTM D 97-17b(2022) | |
| 372 | Liquid fuels: light fuel oil, heavy fuel oil, Lubricating materials: engine oil, industrial lubricating oils | Sulfur content Range (0,050 – 1,00) %(m/m) |
Energy-dispersive X-ray fluorescence spectrometry | PN –EN ISO 8754:2007+Ap1:2014-02 | |
| 373 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil, heavy fuel oil, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Density Range (700,0 – 950,0) kg/m3 |
Hydrometer method | PN-EN ISO 3675:2004 | |
| 374 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil, heavy fuel oil, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Density at 15°C and 20°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | ASTM D 4052-22 | |
| 375 | Liquid fuels: diesel fuel, light fuel oil, heavy fuel oil, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Kinematic viscosity at 20°C, 40°C and 100°C Range (1,500 – 100,0) mm2/s Dynamic viscosity (calculated) |
Capillary method | PN-EN ISO 3104:2024-01 | |
| 376 | Liquid fuels: diesel fuel, light fuel oil, heavy fuel oil, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Kinematic viscosity at 20 °C, 40 °C and 100 °C Range (1,500 – 100,0) mm2/s |
Capillary method | ASTM D 445-24 | |
| 377 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 378 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Carbon residue Range (0,10 – 3,50) %(m/m) |
Gravimetric method | PN-EN ISO 10370:2014-12 | |
| 379 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Cold filter plugging point Range (0 – (–30)) °C |
Optical method | PN-EN 116:2015-09 | |
| 380 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Cloud point Range (-38) – (+10) °C |
Optical method | PN-EN ISO 3015:2019-06 | |
| 381 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 382 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 383 | Liquid fuels: diesel fuel, unleaded petrol, liquid biofuels: fatty acid methyl esters (FAME) | Sulfur content Range (1,0 – 20,0) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 384 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Sulfated ash content Range (0,005 – 2,00) %(m/m) |
Gravimetric method | PN ISO 3987:2014-05 | |
| 385 | Liquid fuels: diesel fuel, light fuel oil, heavy fuel oil | Flash point Range (40,0 – 250,0) °C Pensky-Martens |
Closed cup method | PN-EN ISO 2719:2016-08+A1: 2021-06 excluding procedure C | ASTM D 93-25 | |
| 386 | Liquid fuels: unleaded petrol, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: engine oil, industrial lubricating oils | Copper strip corrosion corrosion class (1 – 4) |
Visual method | PN-EN ISO 2160:2004 | ASTM D 130-19 | |
| 387 | Liquid fuels: diesel fuel | Fatty acid methyl ester FAME content Range (0,05 – 10,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 388 | Liquid fuels: diesel fuel, unleaded petrol | Fractional composition Range (40,0 – 360,0) 0C |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 389 | Liquid fuels: light heating oil, heavy heating oil | Gross calorific value Range (35000 – 45000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-C-04062:2018-05 | |
| 390 | Liquid fuels: heavy fuel oil | Content of iron, vanadium and nickel Fe (1,00 – 150) mg/kg V (1,00 – 150) mg/kg Ni (1,00 – 150) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ASTM D 5708-15 (Reapproved 2020)e1 – Method A | |
| 391 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) %(m/m), %(v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 392 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (30,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 393 | Liquid fuels: light fuel oil | Butoxybenzene (n-butyl phenyl ether (BPE)) content Range (1,00 – 15,00) mg/l |
Gas chromatography with mass spectrometry detection (GC-MS) | ILIADe 606:2024 procedure B | |
| 394 | Lubricants: engine oils, industrial lubricating oils | Structural viscosity at low temperatures Range (1300 – 10000) mPa∙s |
CCS method | PN-C-04150:2004 | ASTM D 5293-20 | |
| 395 | Lubricants: engine oils, industrial lubricating oils | Total base number Range (1,0 -90,0) mg/g KOH |
Potentiometric titration method | PN-ISO 3771:2012 | |
| 396 | Lubricants: engine oils, industrial lubricating oils | Flash point Range (180 – 270) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | ASTM D 92-24 | |
| 397 | Lubricants: engine oils, industrial lubricating oils | Viscosity index (calculated) | PN-ISO 2909:2009+Ap1:2010 | ASTM D 2270-24 | ||
| 398 | Lubricants: engine oils, industrial lubricating oils | Demulsibility properties Range (5 – 60) min |
Visual method | PN-ISO 6614:2010+A1:2022-05 | |
| 399 | Lubricants: engine oils, industrial lubricating oils | Acid value Range (0,1 – 5,0) mg/g KOH |
Titrimetric method | PN-ISO 6618:2011 | |
| 400 | Lubricants: engine oils, industrial lubricating oils | Colour Range (0,5 – 8,0) |
Visual method | ASTM D 1500-24 | |
| 401 | Lubricants: engine oils, industrial lubricating oils | Content of calcium, phosphorus, magnesium, zinc Ca (0,003 – 0,300) %m/m Mg (0,003 – 0,300) %m/m P (0,003 – 0,300) %m/m Zn (0,003 – 0,300) %m/m |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ASTM D 4951-14(2019) | |
| 402 | Other petroleum products: bitumen, bituminous products | Brittleness temperature [(-23) (-8)] °C |
Fraass method | PN-EN 12593:2015-08 | |
| 403 | Other petroleum products: bitumen, bituminous products | Penetration Range (20 – 220) * 0,1mm |
Needle penetration method | PN-EN 1426:2025-02 | |
| 404 | Other petroleum products: bitumen, bituminous products | Softening point of bitumens Range (30,0 – 110,0) °C |
Ring and Ball method | PN-EN 1427:2015-08 | |
| 405 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Iodine value Range (85 – 130) g iodine/100g |
Titrimetric method | PN-EN 14111:2022-11 | |
| 406 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Acid value Range (0,10 – 1,00) mg/g KOH |
Titrimetric method | PN-EN 14104:2021-06 | |
| 407 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Oxidation stability Range (1,0 – 15,0) h |
Conductometric method | PN-EN 14112:2021-05 | |
| 408 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Fatty acid methyl ester (FAME ) content Range (90,0 – 99,0) %(m/m) Linolenic acid methyl ester content Range (1,0 – 15,0) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 14103:2020-06 | |
| 409 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Content of polyunsaturated fatty acid methyl esters (more than 4 double bonds) Range (0,6 – 0,8) %(m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 15779+A1:2013-12 | |
| 410 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Monoacylglycerol content Range (0,10 – 1,25) %(m/m) Diacylglycerol content Range (0,10 – 0,50) %(m/m) Triacylglycerol content Range (0,10 – 0,40) %(m/m) Free glycerol content Range (0,001 – 0,050) %(m/m) Total glycerol content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 14105:2025-04 | |
| 411 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Methyl alcohol content Range (0,01 – 0,10) %(m/m) |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-EN 14110:2019-05 excluding procedure A | |
| 412 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Phosphorus content Range (4,0 – 10,0) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14107:2004 | |
| 413 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Calcium and magnesium content Range (1,0 – 10,0) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14538:2008 | |
| 414 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Sodium content Range (1,0 – 10,0) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14538:2008 | |
| 415 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Potassium content Range (1,0 – 10,0) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14538:2008 | |
| 416 | Liquid fuels: liquid biofuels – fatty acid methyl esters (FAME) | Tendency of biodiesel to block the fuel filter Range (80 – 400) s |
CSFT method | ASTM D 7501-22 | |
| 417 | Wastewater | Sampling for chemical and physical testing | Manual method | PN-ISO 5667-10:2021-11 | |
| 418 | Wastewater | Total phosphorus concentration Range (0,005 – 10,0) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 8 +Ap1:2010+Ap2:2010 | |
| 419 | Wastewater | Kjeldahl nitrogen concentration Range (1 – 100) mg/l |
Titrimetric method | PN-EN 25663:2001 | |
| 420 | Wastewater | Nitrate nitrogen concentration Range (0,010 – 30,0) mg/l |
Spectrophotometric method | Method 125 issue 2 of 16.07.2020 | |
| 421 | Wastewater | Nitrite nitrogen concentration Range (0,005 – 2,5) mg/l Nitrite concentration (calculated) |
Spectrophotometric method | PN-EN 26777:1999 | |
| 422 | Wastewater | Total nitrogen concentration (sum of Kjeldahl nitrogen, nitrate and nitrite nitrogen) (calculated) | Method 047 issue 5 of 19.11.2019 | ||
| 423 | Wastewater | Chemical oxygen demand Range (20,0 – 1000) mg O2/l |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 424 | Wastewater, water | Total suspended solids (TSS) Range (5,0 – 50) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 425 | Gaseous fuels: hydrogen (automotive) | Determination of water content Range (1,00 -10,00) μmol/mol |
Continuous-wave cavity ring-down spectrometry (CRDS) | NPL Report AS64:2011-08 p. 4.2.1 (a) | Instruction IT-M/PP6/95 issue 2 of 11.03.2024 | |
| 426 | Gaseous fuels: hydrogen (automotive) | Content of hydrogen sulphide, carbonyl sulphide, methyl mercaptan, carbon disulphide Hydrogen sulfide (0,003 – 0,010) μmol/mol Carbonyl sulfide (0,003 – 0,010) μmol/mol Methyl mercaptan (0,003 – 0,010) μmol/mol Carbon disulfide (0,003 – 0,010) Total sulfur compounds (calculated) |
By gas chromatography with a chemiluminescence detector (GC-SCD) | ASTM D 7652-11 | |
| 427 | Gaseous fuels: hydrogen (automotive) | Helium content Helium (75,0 – 315,0) μmol/mol Content of carbon dioxide, carbon monoxide, methane and total hydrocarbons excluding methane (C1 equivalent) Carbon dioxide (0,5 – 2,0) μmol/mol Carbon monoxide (0,055 – 0,220) μmol/mol Methane (30,0 – 100,0) μmol/mol Total hydrocarbons excluding methane (C1 equivalent) (0,5 – 2,0) μmol/mol |
Gas chromatography with a thermal conductivity detector (GC-TCD); Gas chromatography with a flame ionization and thermal conductivity detector (GC-FID/TCD) | NPL Report AS64:2011-08 p. 4.2.4 (a) | Instruction IT-M/PP6/97 issue 3 of 25.03.2024; NPL Report AS64:2011-08 p. 4.2.7 (a), p. 4.2.8 (b), p. 4.2.2 (a) | Instruction IT-M/PP6/97 issue 3 of 25.03.2024 | |
| 428 | Gaseous fuels: hydrogen (automotive) | Formaldehyde and organic halide content Formaldehyde (0,05 – 0,40) μmol/mol Organic halogen compounds: Range 1,2,4-trichlorobenzene (0,002 – 0,04) μmol/mol 1,2-dichlorobenzene (0,002 – 0,04) μmol/mol 1,3-dichlorobenzene (0,002 – 0,04) μmol/mol 1,1,2,2-tetrachloroethane (0,002 - 0,04) μmol/mol chlorobenzene (0,002 – 0,04) μmol/mol tetrachloroethylene (0,002 – 0,04) μmol/mol 1,2-dibromoethane (0,002 – 0,04) μmol/mol 1,1,2-trichloroethane (0,002 – 0,04) μmol/mol trans-1,3-dichloropropene (0,002 – 0,04) μmol/mol 1,3-dichloropropene (0,002 – 0,04) μmol/mol trichloroethylene ( 0,002 – 0,04) μmol/mol 1,2-dichloropropane (0,002 – 0,04) μmol/mol carbon tetrachloride (0,002 – 0,04) μmol/mol 1,1,1-trichloroethane (0,002 – 0,04) μmol/mol 1,2-dichloroethane (0,002 – 0,04) μmol/mol trichloromethane (0,002 – 0,04) μmol/mol cis-1,1-dichloroethene (0,002 – 0,04) μmol/mol 1,1-dichloroethane (0,002 – 0,04) μmol/mol 1,1,2-trichloro-1,2,2-trifluoromethane (0,002 – 0,04) μmol/mol allyl chloride (0,002 – 0,04) μmol/mol methylene chloride (0,002 – 0,04) μmol/mol 1,1-dichloroethane (0,002 – 0,04) μmol/mol trichloromonofluoromethane (0,002 – 0,04) μmol/mol ethyl chloride (0,002 – 0,04) μmol/mol bromomethane (0,002 – 0,04) μmol/mol chloroethene (0,002 – 0,04) μmol/mol 1,2-dichloro-1,1,1,2-tetrafluoroethane (0,002 – 0,04) μmol/mol chloromethane (0,002 – 0,04) μmol/mol dichlorodifluoromethane (0,002 – 0,04) μmol/mol Content of organic halogen compounds (calculated) |
Gas chromatography with mass spectrometry detection (GC-MS) | ASTM D 7892-25 | |
| 429 | Gaseous fuels: hydrogen (automotive) | Argon, nitrogen, oxygen content Argon (4,0 – 300,0) μmol/mol Nitrogen (5,0 – 300,0)μmol/mol Oxygen (2,0 – 10,0) μmol/mol |
Gas chromatography with a pulsed discharge helium ionization detector (GC-PDHID) | NPL Report AS64:2011-08 p. 4.2.6 (b), p. 4.2.5 (a), p. 4.2.3 (a) | Instruction IT-M/PP6/98 issue 3 of 25.03.2024 | |
| 430 | Gaseous fuels: hydrogen (automotive) | Formic acid, ammonia content Formic acid (0,05 – 0,40) μmol/mol Ammonia (0,05 – 0,40) μmol/mol |
Ion chromatography with a conductometric detector (IC) | JIS K0127:2013 | Instruction IT-M/PP6/96 issue 2 of 11.03.2024 | |
| 431 | Gaseous fuels: hydrogen (automotive) | Particulate matter content Range (0,15 – 1,40) mg/kg |
Gravimetric method | ASTM D 7651:24e1 | |
| 432 | Gaseous fuels: hydrogen (automotive) | Hydrogen fuel index (calculated) | ISO 14687:2019-11 | ||
| 433 | Gaseous fuels: hydrogen (automotive) | Total content of gases other than hydrogen (calculated) | ISO 14687:2019-11 | ||
| Petroleum Products Laboratory in Jedlicze PP5 | |||||
| 434 | Liquid fuels: unleaded petrol, diesel fuel | Sampling from a dispenser for chemical and physical testing | PN-EN 14275:2013-06 | ||
| 435 | Liquid fuels: light heating oil, heavy heating oil, unleaded petrol, diesel fuel, Lubricants: base oils, engine oils, industrial lubricating oils, Crude oil | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7, 8.8, 9.8, 10.6, 10.7 | ||
| 436 | Liquid fuels: unleaded petrol | Motor octane number MON Range 60 – 100 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 437 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 438 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 439 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) % (v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 440 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil, Chemical products: solvents | Density Range (650,0 – 950,0) kg/m3 |
Hydrometer method | PN-EN ISO 3675:2004 | |
| 441 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil, Chemical products: solvents | Density at 15°C Range (664,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 442 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil, Chemical products: solvents | Fractional composition Range (10,0 – 370,0) °C |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 443 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil, Chemical products: solvents | Copper strip corrosion Range 1a – 4c (scale) |
Visual method | PN-EN ISO 2160:2004 | |
| 444 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil, Chemical products: solvents | Sulfur content Range (3 – 500) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 445 | Liquid fuels: diesel fuel | Oxidation stability Range (5,0 – 50,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 446 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Oxidation stability Range (1,0 – 16,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 447 | Liquid fuels: light fuel oil | Sulfur content Range (0,03 – 1,2) %(m/m) |
Energy-dispersive X-ray fluorescence spectrometry | PN-EN ISO 8754:2007+Ap1:2014-02 | |
| 448 | Liquid fuels: diesel fuel, light fuel oil | Kinematic viscosity at 40 °C Range (2,000 – 10,00) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 procedure A | |
| 449 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (40,0 – 100,0) °C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 450 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 451 | Liquid fuels: diesel fuel, light fuel oil | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 452 | Liquid fuels: diesel fuel, light fuel oil | Cold filter plugging point [0 (-30)] oC |
Optical method | PN-EN 116:2015-09 | |
| 453 | Liquid fuels: diesel fuel, light fuel oil | Pour point [10 (-40,0)] oC |
Optical method | PN-EN ISO 3016:2019-06 | ASTM D 97-17b(2022) | |
| 454 | Liquid fuels: diesel fuel, light fuel oil | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 455 | Liquid fuels: diesel fuel, light fuel oil | Cloud point [0 (-45)] oC |
Optical method | PN-EN ISO 3015:2019-06 | |
| 456 | Liquid fuels: diesel fuel, light fuel oil | Solvent Red 19 dye content Range (1,0 – 10,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method A | |
| 457 | Liquid fuels: diesel fuel, light fuel oil | Fatty acid methyl esters (FAME) content Range (0,05 –10,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 458 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 459 | Crude oil | Density at 15°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 460 | Crude oil, Liquid fuels: heavy fuel oil | Impurity content Range (0,01 – 0,40) %(m/m) |
Gravimetric method | PN-EN ISO 3735:2001 | |
| 461 | Chemical products: low-freezing fluids | Crystallisation temperature [(-18) (-50)] oC |
Visual method | PN-93/C-40008/10 | |
| 462 | Lubricants: base oils, engine oils, industrial lubricating oils | Anti-corrosion properties of mineral oils (rusting on a steel rod) | Visual method | PN-ISO 7120:2011 procedure A and B | |
| 463 | Lubricants: base oils, engine oils, industrial lubricating oils | Kinematic viscosity at 40 °C and 100 °C Range (2,000 – 1200) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 procedure A | |
| 464 | Lubricants: base oils, engine oils, industrial lubricating oils | Pour point [10 (-45)] oC |
Optical method | PN-EN ISO 3016:2019-06 | |
| 465 | Lubricants: base oils, engine oils, industrial lubricating oils | Density Range (800,0 – 900,0) kg/m3 |
Hydrometer method | PN-EN ISO 3675:2004 | |
| 466 | Lubricants: base oils, engine oils, industrial lubricating oils | Flash point Range (80,0 – 280,0) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | |
| 467 | Lubricants: base oils, engine oils, industrial lubricating oils | Density at 15°C Range (800,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 468 | Lubricants: base oils, engine oils, industrial lubricating oils | Residue after incineration Range (0,001 – 0,18) %(m/m) |
Gravimetric method | PN-EN ISO 6245:2008 | |
| 469 | Lubricants: base oils, engine oils, industrial lubricating oils | Copper strip corrosion Range 1a – 4c (scale) |
Visual method | PN-EN ISO 2160:2004 | |
| 470 | Lubricants: base oils, engine oils, industrial lubricating oils | Corrosive action on metals | Visual method | PN-85/C-04093 Method B | |
| 471 | Lubricating materials: base oils, industrial lubricating oils | Air release properties Range (1 – 15) minutes |
Gravimetric method | PN-ISO 9120:2009+Ap1:2022-04 | |
| 472 | Lubricants: greases | Dropping point Range (70 − 230) °C |
Ubbelohde method | PN-55/C-04020 | |
| 473 | Lubricants: greases | Dropping point Range (130 – 300) °C |
Visual method | PN-ISO 2176:2011+A1:2021-07 | |
| 474 | Lubricants: greases | Penetration Range 200 – 420 |
Cone penetration method | PN-ISO 2137:2021-07 | |
| 475 | Wastewater, rainwater | Sampling for chemical and physical testing Temperature of the collected sample of rainwater, wastewater Range (2,0 – 30,0) °C |
Manual method | PN-ISO 5667-10:2021-11 Method No. 111 issue 5 of 01.07.2020 | |
| 476 | Wastewater | pH Range 4,0 – 10,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 477 | Wastewater | Total suspended solids (TSS) Range (5 – 200) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 478 | Wastewater | Phenol concentration (phenol index) Range (0,002 – 0,100) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Method B | |
| 479 | Wastewater | Mineral oil index Range (2,0 – 1000,0) mg/l |
Laser spectroscopy method | ASTM D 7678-17(2022) | |
| 480 | Wastewater | Chloride concentration Range (5 – 150) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 481 | Wastewater | Biochemical oxygen demand BOD5 Range (3 – 600) mg O2/l |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 482 | Wastewater | Chemical oxygen demand Range (30,0 – 1000) mg O2/l |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 483 | Wastewater | Phosphorus concentration Range (0,10 – 25,0) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 cl. 8 | |
| Laboratory Service Point in Ostrów Wielkopolski PP7/3 | |||||
| 484 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, liquid biofuels: bioethanol, liquid biofuels: fatty acid methyl esters (FAME) | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3- 8.3.1.6, 8.3.1.8, 8.3.2, 8.7- 8.9, 9.8, 10.6, 10.7 | ||
| 485 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, liquid biofuels: bioethanol, fatty acid methyl esters (FAME) | Density at 15°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 486 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Fractional composition Range (30,0 – 370,0) °C |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 487 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Sulfur content Range (3,0 – 100) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 488 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 489 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) %(v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 490 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 491 | Liquid fuels: unleaded petrol | Motor octane number MON Range 84,0 – 90,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 492 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (45,0 – 75,0) °C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 493 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 494 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 495 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 496 | Liquid fuels: diesel fuel, liquid biofuels: fatty acid methyl esters (FAME) | Cold filter plugging point [0 °C (-40)°C] |
Optical method | PN-EN 116:2015-09 | |
| 497 | Liquid fuels: diesel fuel | Fatty acid methyl esters (FAME) content Range (3,0 – 10,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 498 | Liquid fuels: diesel fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 499 | Liquid fuels: diesel fuel | Cetane number Range 50,0 – 60,0 |
Motor method | PN-EN ISO 5165:2021-02 | |
| 500 | Liquid fuels: liquid biofuels: fatty acid methyl esters ( FAME) | Tendency to plug the filter after cooling Range (30 – 360) s |
CSFT method | ASTM D 7501-22 | |
| 501 | Liquid fuels: liquid biofuels: fatty acid methyl esters ( FAME) | Oxidation stability Range (1,0 – 16,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 502 | Liquid fuels: diesel fuel, liquid biofuels: fatty acid methyl esters (FAME) | Cloud point [0oC (-25) oC] |
Optical method | PN-EN ISO 3015:2019-06 | |
| 503 | Liquid fuels: liquid biofuels: bioethanol | Power Range (95,0 – 100,0) %(v/v) |
Oscillation method | PN-A-79528-3:2007 cl. 5.2 | |
| 504 | Liquid fuels: diesel fuel, liquid biofuels: diesel fuel with FAME | Oxidation stability Range (5,0 – 48,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| Laboratory Service Point in Lublin PP7/1 | |||||
| 505 | Liquid fuels: unleaded petrol, diesel fuel, light heating oil, liquid biofuels: fatty acid methyl esters (FAME) | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7- 8.9, 9.8, 10.6, 10.7 | ||
| 506 | Liquid fuels: unleaded petrol | Motor octane number MON Range 80,0 – 90,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 507 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 508 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 509 | Liquid fuels: unleaded petrol | Sulfur content Range (3,0 – 100) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 510 | Liquid fuels: unleaded petrol | Density at 15°C Range (700,0 – 800,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 511 | Liquid fuels: unleaded petrol | Fractional composition Range (30,0 – 220,0) oC |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 512 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) % (v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 513 | Liquid fuels: diesel fuel, light fuel oil | Density at 15°C Range (800,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 514 | Liquid fuels: diesel fuel, light fuel oil | Fractional composition Range (150,0 – 370,0) oC |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 515 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 516 | Liquid fuels: diesel fuel, light fuel oil | Water content Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 517 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (40,0 – 100,0) oC |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 518 | Liquid fuels: diesel fuel, light fuel oil | Sulfur content Range (3,0 – 100) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 519 | Liquid fuels: diesel fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 520 | Liquid fuels: diesel fuel | Cold filter plugging point [(- 33) (+5)] oC |
Optical method | PN-EN 116:2015-09 | |
| 521 | Liquid fuels: diesel fuel | Fatty acid methyl esters (FAME) content Range (3,0 – 10,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 522 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Density at 15°C Range (860,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 523 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 524 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Cold filter plugging point [(- 25) (-5)] oC |
Optical method | PN-EN 116:2015-09 | |
| 525 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Tendency to plug the filter after cooling Range (30 – 360) s |
Filtration after cooling method | ASTM D 7501-22 | |
| 526 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| Laboratory Service Point in Olsztyn PP7/2 | |||||
| 527 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil, liquid biofuels: fatty acid methyl esters (FAME) | Sampling from a tank for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7 - 8.9, 9.8, 10.6, 10.7 | ||
| 528 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil | Sulfur content Range (3,0 – 50) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 529 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil | Density at 15°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 530 | Liquid fuels: diesel fuel, unleaded petrol, light fuel oil | Fractional composition Range (30,0 – 370,0) oC |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 531 | Liquid fuels: diesel fuel | Cold filter plugging point [ (-40) – (0,0)]°C |
Optical method | PN-EN 116:2015-09 | |
| 532 | Liquid fuels: diesel fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 533 | Liquid fuels: diesel fuel | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 534 | Liquid fuels: diesel fuel | Cloud point [(- 20,0) (0,0)] oC |
Optical method | ASTM D 5772-21 | |
| 535 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (40,0 – 90,0) oC |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 536 | Liquid fuels: diesel fuel, light fuel oil | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 537 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) %(v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 538 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 539 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 540 | Liquid fuels: unleaded petrol | Motor octane number MON Range 80,0 – 90,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 541 | Liquid fuels: diesel fuel, liquid biofuels: diesel fuel with FAME | Fatty acid methyl ester content Range (3,0 – 20,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 542 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Density at 15°C Range (800,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 543 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (30 – 1000) mg/kg |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 544 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Cloud point [(- 20,0) (0,0)] oC |
Optical method | ASTM D 5772-21 | |
| 545 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Cold filter plugging point [(-40) (0,0)] °C |
Optical method | PN-EN 116:2015-09 | |
| 546 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Tendency to plug the filter after cooling Range (50,0 – 360) s |
Filtration after cooling method | ASTM D 7501-22 | |
| 547 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| Laboratory Service Point in Warsaw PP7/4 | |||||
| 548 | Liquid fuels: unleaded petrol, diesel fuel liquid biofuels: fatty acid methyl esters (FAME), bioethanol | Spot sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2025-12 excluding 8.3.1.3, 8.3.1.5, 8.3.1.6, 8.3.1.8, 8.3.2, 8.7-8.9, 9.8, 10.6, 10.7 | ||
| 549 | Liquid fuels: unleaded petrol | Air saturated vapour pressure Range (40,0 – 106,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | |
| 550 | Liquid fuels: unleaded petrol | Content of oxygenated organic compounds Range (0,17 – 15,0) %(v/v) Total organically bound oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 551 | Liquid fuels: unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 cl. 5.5.2 | ||
| 552 | Liquid fuels: unleaded petrol | Motor octane number MON Range 80,0 – 90,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 553 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Sulfur content Range (3,0 – 60,0) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 554 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Density at 15°C Range (700,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 555 | Liquid fuels: unleaded petrol, diesel fuel, light fuel oil | Fractional composition Range (30,0 – 370,0) 0C |
Distillation method | PN-EN ISO 3405:2019-05 | |
| 556 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Density at 15°C Range (800,0 – 900,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 557 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Water content Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 558 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Tendency to plug the filter after cooling Range (50 – 650) s |
Filtration method after cooling | ASTM D 7501-22 | |
| 559 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Oxidation stability Range (1,0 – 16,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 560 | Liquid fuels: diesel fuel, light fuel oil | Kinematic viscosity at 40 °C Range (2,000 – 6,000) mm2/s |
Capillary method | PN-EN ISO 3104:2024-01 procedure A | |
| 561 | Liquid fuels: diesel fuel, light fuel oil | Flash point Range (40,0 – 100,0) °C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08+A1:2021-06 | |
| 562 | Liquid fuels: diesel fuel, light fuel oil | Water content Range (0,003 – 0,100) %(m/m) |
Coulometric titration method | PN-EN ISO 12937:2005+Ap1:2021-11 | |
| 563 | Liquid fuels: diesel fuel, light fuel oil | Impurity content Range (12,0 – 26,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| 564 | Liquid fuels: diesel fuel, light fuel oil, liquid biofuels: diesel fuel with FAME | Fatty acid methyl esters (FAME) content Range (3,0 – 20,0) %(v/v) |
Spectrometry method in the infrared range IR | PN-EN 14078:2014-06 | |
| 565 | Liquid fuels: liquid biofuels: fatty acid methyl esters (FAME) | Impurity content Range (5,0 – 27,0) mg/kg |
Gravimetric method | PN-EN 12662-2:2024-11 | |
| 566 | Liquid fuels: liquid biofuels: bioethanol | Power Range (90,0 – 100,0) %(v/v) |
Oscillation method | PN-A-79528-3:2007 cl. 5.2 | |
| 567 | Liquid fuels: liquid biofuels: bioethanol | Density at 20°C Range (789,0 – 830,0) kg/m3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 568 | Liquid fuels: diesel fuel | Oxidation stability Range (5,0 – 48,0) h |
Conductometric method | PN-EN 15751:2014-05 | |
| 569 | Liquid fuels: diesel fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ||
| 570 | Liquid fuels: diesel fuel | Cold filter plugging point [0°C (- 40)] °C |
Optical method | PN-EN 116:2015-09 | |
| Fertilisers and Natural Environment Laboratory TT1 | |||||
| 571 | Water | Colour Range (2 – 100) mg/l Pt |
Spectrophotometric method | PN-EN ISO 7887:2012+Ap1:2015-06 Method C | |
| 572 | Water | Benzene concentration Range (0,25 – 10) μg/l |
Gas chromatography with static headspace analysis and flame ionization detection (HS-GC-FID) | PN-ISO 11423-1:2002 | |
| 573 | Water | Turbidity Range (0,50 – 50) NTU |
Nephelometric method | PN-EN ISO 7027-1:2016-09 | |
| 574 | Water, wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 575 | Water, wastewater | Total suspended solids (TSS) Range (2,0 – 5000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 576 | Water, wastewater | Dry residue Range (10 – 5000) mg/l |
Gravimetric method | PN-78/C-04541 cl. 4.1 | |
| 577 | Water, wastewater | Electrical conductivity Range (10 – 1 300) mS/m |
Conductometric method | PN-EN 27888:1999 | |
| 578 | Water, wastewater | Nitrite concentration Range (0,050 – 33) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 579 | Water, wastewater | Nitrite nitrogen concentration (calculated) | PN-EN 26777:1999 | ||
| 580 | Water, wastewater | Nitrite concentration Range (0,050 – 20) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 581 | Water, wastewater | Nitrite nitrogen concentration (calculated) | PN-EN ISO 10304-1:2009+AC:2012 | ||
| 582 | Water, wastewater | Nitrate concentration Range (0,050 – 2000) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 583 | Water, wastewater | Nitrate nitrogen concentration (calculated) | PN-EN ISO 10304-1:2009+AC:2012 | ||
| 584 | Water, wastewater | Nitrate concentration Range (0,18 – 2200) mg/l |
Spectrophotometric method | PN-82/C-04576/08 | |
| 585 | Water, wastewater | Nitrate nitrogen concentration (calculated) | PN-82/C-04576/08 | ||
| 586 | Water, wastewater | Kjeldahl nitrogen concentration Range (3,4 – 1000) mg/l |
Titrimetric method | PN-EN 25663:2001 excluding cl. 11.1 | |
| 587 | Water, wastewater | Total nitrogen concentration (calculated) | Method No. 047 issue 5 of 19.11.2019 | ||
| 588 | Water, wastewater | Ammonium nitrogen concentration Range (0,47 – 1000) mg/l |
Titrimetric method | PN-ISO 5664:2002 | |
| 589 | Water, wastewater | Concentration of ammonium ion, ammonia (calculated) | PN-ISO 5664:2002 | ||
| 590 | Water, wastewater | Ammonium nitrogen concentration Range (0,050 – 5,0) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 591 | Water, wastewater | Concentration of ammonium ion, ammonia (calculated) | PN-ISO 7150-1:2002 | ||
| 592 | Water, wastewater | Total phosphorus concentration Range (0,016 – 32) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 | |
| 593 | Water, wastewater | Phosphate concentration Range (0,050 – 100) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 594 | Water, wastewater | Iron concentration Range (0,010 – 10,0) mg/l |
Spectrophotometric method | PN-ISO 6332:2001+Ap1:2016-6 | |
| 595 | Water, wastewater | Manganese concentration Range (0,030 – 4,0) mg/l |
Spectrophotometric method | PN-92/C-04590/03 | |
| 596 | Water, wastewater | Concentration of substances extractable with petroleum ether Range (10 – 1000) mg/l |
Gravimetric method | PN-86/C-04573/01 | |
| 597 | Water, wastewater | Biochemical oxygen demand (BOD5) Range (1 – 6000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 598 | Water, wastewater | Dissolved oxygen concentration Range (0,2 – 10) mg/l O2 |
Electrochemical method | PN-EN ISO 5814:2013-04 | |
| 599 | Water, wastewater | Chemical oxygen demand – COD-Cr Range (9,0 – 3000) mg/l O2 |
Titrimetric method | PN-74/C-04578-03 | |
| 600 | Water, wastewater | Chemical oxygen demand COD-Cr Range (25 – 1000) mg/l O2 |
Titrimetric method | PN-ISO 6060:2006 | |
| 601 | Water, wastewater | Chemical oxygen demand COD-Cr Range (10 – 10000) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 602 | Water, wastewater | Sulfate concentration Range (0,050 – 5000) mg/l |
Ion chromatography (IC) with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 603 | Water, wastewater | Chloride concentration Range (0,10 – 5000) mg/l |
Ion chromatography (IC) with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 604 | Water, wastewater | Permanganate index Range (0,50 – 100) mg O2/l |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 605 | Water, wastewater | Aluminium concentration Range (0,0100 – 10,0) mg/l |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 606 | Water, wastewater | Total content of calcium and magnesium (total hardness) Range (0,050 – 40) mmol/l Range (5,0 – 4000) mg/l CaCO3 |
Titrimetric method | PN-ISO 6059:1999 | |
| 607 | Water, wastewater | Calcium concentration Range (0,050 – 25) mmol/l Range (2,0 – 1000) mg/l |
Titrimetric method | PN-ISO 6058:1999 | |
| 608 | Water, wastewater | Magnesium concentration (calculated) | PN-C 04554-4:1999 Annex A | ||
| 609 | Water, wastewater | Sulfate concentration Range (20 – 5000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 610 | Water, wastewater | Chloride concentration Range (5 – 25 000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 611 | Water, wastewater | Mineral oil index Range (0,10 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 612 | Water, wastewater | Vinyl chloride concentration Range (0,10 – 1,0) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | Method No. 192 issue 1 of 26.09.2019 | |
| 613 | Water, wastewater | Concentration of halogenated hydrocarbon derivatives Range 1,2-dichloroethane (0,0010 – 0,10) mg/l Tetrachloromethane (0,00050–0,10) mg/l Tetrachloroethylene (0,0010 –0,10) mg/l trichloroethylene (0,0010 –0,10) mg/l trichloromethane (0,0010 –0,10) mg/l hexachlorobutadiene (0,00010 – 0,010) mg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN ISO 10301:2002 | |
| 614 | Water, wastewater | Total carbon concentration organic (TOC) and dissolved carbon organic (DOC) Range (0,30 – 1000) mg/l |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| 615 | Water, wastewater | Total dissolved solids concentration (TDS) Range (10,0 – 5000) mg/l |
Gravimetric method | PN-EN 15216:2022-03 | |
| 616 | Water, wastewater | Total chlorine concentration Range (0,030 – 5) mg/l Free chlorine concentration Range (0,030 – 3,5) mg/l Combined chlorine (calculated) |
Titrimetric method | PN-EN ISO 7393-1:2011 | |
| 617 | Water, wastewater | Hexachlorobenzene concentration Range (0,010 – 0,10) μg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN ISO 6468:2002 | |
| 618 | Water, wastewater | Concentration of aromatic hydrocarbons benzene (0,0010 – 100) mg/l toluene (0,0010 – 100) mg/l ethylbenzene (0,0010 – 100) mg/l styrene (0,0010 – 100) mg/l o-xylene (0,0010 – 100) mg/l (m+p)-xylene (0,0020 – 200) mg/l |
Gas chromatography with static headspace analysis and flame ionization detection (HS-GC-FID) | PN-ISO 11423-1:2002 | |
| 619 | Water, wastewater | Sum of aromatic hydrocarbons (calculated) | PN-ISO 11423-1:2002 | ||
| 620 | Water, wastewater | Trihalomethane concentration chloroform (1,0- 250) μg/l chlorodibromomethane (1,0- 250) μg/l dichlorobromomethane (1,0- 250) μg/l bromoform (1,0- 250) μg/l |
Gas chromatography with static headspace analysis and electron capture detection (HS-GC-ECD) | PN-EN ISO 10301:2002 | |
| 621 | Water, wastewater | Sum of trihalomethanes (calculated) | PN-EN ISO 10301:2002 | ||
| 622 | Water, wastewater | Concentration of halogenated hydrocarbon derivatives Range 1,2-dichloroethane (0,25 – 10) μg/l tetrachloromethane (0,10 – 10) μg/l tetrachloroethylene (0,10 – 10) μg/l trichloroethylene (0,10 – 10) μg/l trichloromethane (0,25 – 10) μg/l |
Gas chromatography with static headspace analysis and electron capture detection (HS-GC-ECD) | PN-EN ISO 10301:2002 | |
| 623 | Water, wastewater | Sum of tetrachloroethylene and trichloroethylene (calculated) | PN-EN ISO 10301:2002 | ||
| 624 | Water, wastewater | Concentration of halogenated hydrocarbon derivatives vinyl chloride (0,25 – 100) μg/l Range 1,2-dichloroethane (0,010 – 20) mg/l tetrachloromethane (0,010 – 20) mg/l tetrachloroethylene (0,010 – 20) mg/l trichloroethylene (0,010 – 20) mg/l trichloromethane (0,010 – 20) mg/l |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-EN ISO 10301:2002 | |
| 625 | Water, wastewater | Fluoride concentration Range (0,050 – 100) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 626 | Water, wastewater | Concentration of total, free and bound cyanides Range (0,010 – 0,30) mg/l |
Spectrophotometric method | Method No. 193 issue 1 of 26.09.2019, Spectroquant test 1.14561.0001 | |
| 627 | Water, wastewater | Bound cyanides (calculated) | Method No. 193 issue 1 of 26.09.2019, Spectroquant test 1.14561.0001 | ||
| 628 | Water, wastewater | Element concentration cadmium (0,00200 – 10,0) mg/l total chromium (0,00200 – 10,0) mg/l copper (0,00200 – 10,0) mg/l nickel (0,00500 – 10,0) mg/l lead (0,0100 – 50,0) mg/l zinc (0,00500 – 50,0) mg/l |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 629 | Water, wastewater | Element concentration cobalt (0,00500 – 10,0) mg/l iron (0,0200 – 50,0) mg/l manganese (0,00200 – 50,0) mg/l vanadium (0,0200 – 10,0) mg/l barium (0,00200 – 10,0) mg/l boron (0,0100 – 1,00) mg/l sodium (0,500 – 2000) mg/l molybdenum (0,00800 – 10,0) mg/l calcium (0,200 – 1000) mg/l magnesium (0,100 – 1000) mg/l potassium (0,100 – 1000) mg/l |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 630 | Water, wastewater | Element concentration arsenic (0,0200 – 1,00) mg/l antimony (0,0200 – 1,00) mg/l selenium (0,0100 – 1,00) mg/l |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 11885:2009 | |
| 631 | Water, wastewater | Mercury concentration Range (0,20 – 70) μg/l |
Atomic absorption spectrometry with amalgamation technique | Method No. 194 issue 1 of 26.09.2019 | |
| 632 | Water, wastewater | Concentration of C6-C12 hydrocarbons Range (0,020 - 1000) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-C-04643:1994 | |
| 633 | Water, wastewater | C12-C35 hydrocarbon concentration Range (0,50 – 5000) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-C-04643:1994 | |
| 634 | Water, wastewater | Sum of C6-C35 hydrocarbons (calculated) | PN-C-04643:1994 | ||
| 635 | Water, wastewater | Alkalinity to phenolphthalein Range (0,40 – 20) mmol/l Total alkalinity Range (0,40 – 20) mmol/l |
Titrimetric method | PN-EN ISO 9963-1:2001+Ap1:2004 | |
| 636 | Chemical products: electrical insulating oils | Polychlorinated biphenyls (PCB) concentration Aroclor 1242 (5,0 – 50) mg/kg Aroclor 1254 (5,0 – 50) mg/kg Aroclor 1260 (5,0 – 50) mg/kg |
Gas chromatography with electron capture detection (GC-ECD) | PN-IEC 997:1998 | |
| 637 | General environment – waste gas samples collected on sorbent tubes | Content of organic compounds vinyl chloride Range (0,050 – 250) μg in the sample 1,2-dichloroethane (0,10 – 250) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 638 | General environment – waste gas samples collected on sorbent tubes | Trichloromethane content Range (1,0 – 250) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 639 | General environment – waste gas samples collected on sorbent tubes | Content of the sum of aromatic hydrocarbons: benzene, ethylbenzene, styrene, toluene, o-xylene, (m+p)xylenes (calculated) | PN-EN 13649:2005 | ||
| 640 | General environment – waste gas samples collected on sorbent tubes | Content of organic compounds aliphatic hydrocarbons C5 – C12 Range (1,0 – 500) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 641 | General environment – waste gas samples collected on sorbent tubes | Methanol content Range (5,0 – 100) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 642 | General environment – waste gas samples collected on sorbent tubes | Content of organic compounds o-xylene (1,0 – 2 500) μg in sample (m+p)-xylene (1,0 – 5000) μg in sample toluene (1,0 – 2 500) μg in sample styrene (1,0 – 2 500) μg in sample methyl ethyl ketone Range (1,0 – 2 500) μg in the sample methyl acetate (1,0 – 2 500) μg in sample ethylbenzene (1,0 – 2 500) μg in sample benzene (1,0 – 2 500) μg in sample (o+m+p)-xylene (1,0 – 7 500) μg in sample tetrachloroethylene (1,0 – 3 000) μg in sample bromomethane (5,0 – 2 500) μg in sample trichloroethene (1,0 – 500) μg in sample 1,1 dichloroethene (1,0 – 500) μg in sample 1,2 dichloroethene (1,0 – 500) μg in sample 1,1,2 trichloroethane (1,0 – 500) μg in sample tetrachloromethane (1,0 – 500) μg in sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 643 | General environment – waste gas samples collected on sorbent tubes | Ethylene glycol content Range (100 – 2500) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | |
| 644 | Workplace environment – air samples collected on filters | Sulphuric acid content - thoracic fraction Range (0,0026 – 0,10) mg in the sample |
Ion chromatography with conductometric detection | Principles and Methods of Assessing the Working Environment 2012 No. 1(71) + 2017 No. 2 (92) | |
| 645 | General environment – waste gas samples collected on filters | Arsenic and antimony content As (0,000500 – 0,05000) mg in sample Sb (0,00100 – 0,0500) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN 14385:2025:05 | |
| 646 | General environment – waste gas samples collected on filters | Element content: Cd (0,000250 – 0,500) mg in the sample Cr (0,000250 – 0,500) mg in the sample Co (0,000250 – 0,500) mg in the sample Cu (0,000250 – 0,500) mg in the sample Mn (0,000250 – 0,500) mg in the sample Ni (0,000500 – 0,500) mg in the sample Pb (0,00250 – 2,50) mg in the sample Tl (0,000500 – 0,0500) mg in the sample V (0,00250 – 0,0500) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14385:2025:05 | |
| 647 | General environment – waste gas samples collected on filters | Mercury content Range (0,0005 – 0,05) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN 13211:2006 | |
| 648 | General environment – waste gas samples collected into absorbing solutions | Element content: Cd (0,000500 – 1,00) mg in the sample, Cr (0,000500 – 1,00) mg in the sample, Co (0,000500 – 1,00) mg in the sample, Cu (0,000200 – 1,00) mg in the sample, Mn (0,000200 – 1,00) mg in the sample, Ni (0,00100 – 1,00) mg in the sample, Pb (0,00500 – 5,00) mg in the sample, Tl (0,00100 – 0,100) mg in the sample, V (0,00500 – 0,100) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14385:2025:05 | |
| 649 | General environment – waste gas samples collected into absorbing solutions | Arsenic, antimony content As (0,00100 – 0,100) mg in the sample Sb (0,00200 – 0,100) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN 14385:2025:05 | |
| 650 | General environment – waste gas samples collected into absorbing solutions | Mercury content Range (0,000500 – 0,0500) mg in sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN 13211:2006 | |
| 651 | General environment – waste gas samples collected into absorbing solutions | Hydrogen chloride content Range (0,050 – 100) mg in the sample |
Spectrophotometric method | PN-EN 1911:2011 | |
| 652 | General environment – waste gas samples collected into absorbing solutions | Hydrogen bromide content Range (0,028 – 1,0) mg in the sample |
Turbidimetric method | Method No. 201 issue 1 of 26.09.2019 | |
| 653 | General environment - waste gas samples collected into absorbing solutions | Ammonia content Range (0,0061 – 9,7) mg in the sample |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 654 | General environment – ambient air samples collected on sorbent tubes | Vinyl chloride content Range (0,020 – 0,50) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Method No. 202 issue 1 of 26.09.2019 | |
| 655 | General environment – ambient air samples collected on sorbent tubes | 1,2-dichloroethane content Range (0,10 – 2,0) μg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Method No. 202 issue 1 of 26.09.2019 | |
| 656 | Soil | Dry matter Range (10,0 – 999) g/kg Range (1,0 – 99,0) % |
Gravimetric method | PN-ISO 11465:1999 | |
| 657 | Soil | Concentration of C6-C12 hydrocarbons Range (12,5 – 10000) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 658 | Soil | Concentration of C12-C35 hydrocarbons Range (12,5 – 10000) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 659 | Soil | Sum of C6-C35 hydrocarbons (calculated) | PN-EN ISO 16703:2011 | ||
| 660 | Sewage sludge, Waste O: code 19 08 05 | Dry residue Range (10,0 – 990) g/kg Range (1,0 – 99,0) % Water content Range (1,0 – 99,0) % Regulated area: O) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Gravimetric method | PN-EN 15934:2013-02 | |
| 661 | Sewage sludge, Waste O: code 19 08 05 | Loss on ignition of dry matter Range (2,0 – 98,0)% Residue on ignition of dry matter (calculated) Regulated area: O) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue |
Gravimetric method | PN-EN 15935:2022-01 | |
| 662 | Gaseous fuels: hydrogen (automotive) | Water content Range (2,00 – 20,00) μmol/mol |
Continuous-wave cavity ring-down spectrometry (CRDS) | ASTM D7941/D7941M-23 | |
| 663 | Gaseous fuels: hydrogen (automotive) | Helium content Range (25,0 – 600) μmol/mol Content of carbon dioxide, methane and hydrocarbons Carbon dioxide (0,200 – 4,00) μmol/mol Methane (10,0 – 200) μmol/mol Total hydrocarbons excluding methane (C1 equivalent) (0,100 – 4,00) μmol/mol |
Gas chromatography with a thermal conductivity detector (GC-TCD); Gas chromatography with a flame ionization and thermal conductivity detector (GC-FID/TCD) | NPL Report AS64:2011-08 p. 4.2.4 (a) | Instruction IT-M/TT1/99 issue 1 of 04.06.2024; NPL Report AS64:2011-08 p. 4.2.7 (a), p. 4.2.2 (a) | Instruction IT-M/TT1/99 issue 1 of 04.06.2024 | |
| 664 | Gaseous fuels: hydrogen (automotive) | Content of hydrogen sulphide, carbonyl sulphide and dimethyl sulphide Hydrogen sulfide (0,00050 – 0,0040) μmol/mol Carbonyl sulfide (0,00050 – 0,0040) μmol/mol Dimethyl sulfide (0,00050 – 0,0040) μmol/mol Total sulfur compounds (calculated) |
Gas chromatography with a chemiluminescence detector (GC-SCD) | ASTM D 7652-11 | |
| 665 | Gaseous fuels: hydrogen (automotive) | Formaldehyde and organic halide content Formaldehyde (0,050 – 0,40) μmol/mol Range 1,2-dichlorobenzene (0,0010 – 0,050) μmol/mol Chloroform (0,0010 – 0,050) μmol/mol Dichloromethane (0,0010 – 0,050) μmol/mol Tetrachloroethylene (0,0010 – 0,050) μmol/mol Content of total halogen compounds (calculated) |
Gas chromatography with a mass detector (GC-MS) | ASTM D 7892-25 | |
| 666 | Gaseous fuels: hydrogen (automotive) | Argon, nitrogen, oxygen, carbon monoxide content Argon (50,0 – 600) μmol/mol Nitrogen (50,0 – 600) μmol/mol Oxygen (3,0 – 40) μmol/mol Carbon monoxide (0,0500 – 0,400) μmol/mol |
Gas chromatography with a pulsed discharge helium ionization detector (GC-PDHID) | NPL Report AS64:2011-08 p.4.2.6 (b), p.4.2.5 (a), p. 4.2.3 (a), p. 4.2.8 (a) | Instruction IT-M/TT1/97 issue 1 of 24.05.2024 | |
| 667 | Gaseous fuels: hydrogen (automotive) | Formic acid, ammonia content Formic acid (0,030 – 4,0) μmol/mol Ammonia (0,020 – 4,0) μmol/mol |
Ion chromatography with a conductometric detector (IC-CD) | JIS K0127:2013 | Instruction IT-M/TT1/102 issue 1 of 24.06.2024 | |
| 668 | Gaseous fuels: hydrogen (automotive) | Particulate matter content Range (0,0500 – 5,00) mg/kg |
Gravimetric method | ASTM D 7651-24e1 | |
| 669 | Gaseous fuels: hydrogen (automotive) | Hydrogen fuel index (calculated) | ISO 14687:2019-11 cl. 5.1 | ||
| 670 | Gaseous fuels: hydrogen (automotive) | Total content of gases other than hydrogen (calculated) | ISO 14687:2019-11 cl. 5.1 | ||
| Water and Wastewater Laboratory | |||||
| 671 | Water | Chemical oxygen demand - COD Range (6,0 – 150) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 672 | Water | Electrical conductivity Range (10 – 10000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 673 | Water intended for human consumption | Total organic carbon (TOC) concentration Dissolved carbon concentration organic (DOC) Range (1,0 – 20) mg/l |
Spectrometry method in the infrared range (IR) | PN-EN 1484:1999 | |
| 674 | Water intended for human consumption | Electrical conductivity Range (10 – 3000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 675 | Wastewater | Anion concentrations fluorides (0,2 – 25) mg/l chlorides (0,5 – 5000) mg/l sulfates (0,5 – 500) mg/l nitrates (0,1 – 15) mg/l mg/l NNO3 nitrites (0,1 – 5) mg/l mg/l NNO2 |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 676 | Wastewater | Chemical oxygen demand - COD Range (10 – 20000) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 677 | Wastewater | Ammonium nitrogen concentration Range (0,1 – 30) mg/l |
Spectrophotometric method | M042 PB-1 issue 4 of 01.06.2018 based on Merck test 1.14752.0001 | |
| 678 | Wastewater | Electrical conductivity Range (10 – 10000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 679 | Water, water intended for human consumption | Anion concentrations chlorates (0,05 – 1,0) mg/l chlorites (0,10 – 1,0) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-4:2022-08 | |
| 680 | Water, water intended for human consumption | Sum of chlorate and chlorite concentrations (calculated) | PN-EN ISO 10304-4:2022-08 | ||
| 681 | Water, water intended for human consumption | Total content of calcium and magnesium (total hardness) Range (0,05 – 20,0) mmol/l Range (0,1 – 40,0) mval/l Range (5 – 2000) mg/l CaCO3 |
Titrimetric method | PN-ISO 6059:1999 | |
| 682 | Water, water intended for human consumption | Manganese concentration Range (0,010 – 2,0) mg/l |
Spectrophotometric method | M514 PB-1 issue 3 of 05.03.2025 based on Merck test 1.01846.0001 | |
| 683 | Water, water intended for human consumption | Ammonium nitrogen concentration Range (0,05 – 3,0) mg/l NNH4 Range (0,07 – 4,0) mg/l NH4 |
Spectrophotometric method | M042 PB-1 issue 4 of 01.06.2018 based on Merck test 1.14752.0001 | |
| 684 | Water, water intended for human consumption | Calcium concentration Range (0,05 – 20) mmol/l Range (0,1 – 40) mval/l Range (2 – 800) mg/l Ca |
Titrimetric method | PN-ISO 6058:1999 | |
| 685 | Water, water intended for human consumption | Colour Range (5 – 70) mg/l Pt |
Visual method | PN-EN ISO 7887:2012+Ap1:2015 Method D | |
| 686 | Water, water intended for human consumption | Colour Range (5 – 50) mg/l Pt |
Spectrophotometric method | PN-EN ISO 7887:2012+Ap1:2015 Method C | |
| 687 | Water, water intended for human consumption | Total alkalinity Range (0,40 – 25) mmol/l Range (0,40 – 25) mval/l |
Titrimetric method | PN-EN ISO 9963-1:2001+Ap1:2004 | |
| 688 | Water, water intended for human consumption | Anion concentrations fluorides (0,2 – 10,0) mg/l chlorides (0,5 – 5000) mg/l sulfates (0,5 – 500) mg/l nitrites (0,1 – 20) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 689 | Water, water intended for human consumption | Magnesium concentration (calculated) | PN-C-04554-4:1999 Annex A | ||
| 690 | Water, water intended for human consumption, wastewater | Iron concentration Range (0,020 – 10,0) mg/l |
Spectrophotometric method | PN-ISO 6332:2001+Ap1:2016 | |
| 691 | Water, water intended for human consumption, wastewater | Chloride concentration Range (5,0 – 5000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 692 | Water, water intended for human consumption, wastewater | Nitrite concentration Range (0,01 – 0,5) mg/l NO2 Nitrite nitrogen concentration (calculated) |
Spectrophotometric method | PN-EN 26777:1999 | |
| 693 | Water, water intended for human consumption, wastewater | Nitrate nitrogen concentration Range (0,10 – 12) mg/l NNO3 Range (0,50 – 50) mg/l NO3 |
Spectrophotometric method | PN-82/C-04576.08 | |
| 694 | Water, water intended for human consumption, wastewater | Ammonium nitrogen concentration Range (0,05 – 50) mg/l NNH4 Range (0,07 – 64) mg/l NH4 |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 695 | Water, water intended for human consumption, wastewater | Boron concentration Range (0,1 – 25) mg/l |
Spectrophotometric method | PN-75/C-04563-01 | |
| 696 | Water, wastewater | Sulfate concentration Range (10 – 1000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 697 | Water, wastewater | Ammonium nitrogen concentration Range (0,5 – 2000) mg/l |
Titrimetric method | PN-ISO 5664:2002 | |
| 698 | Water, wastewater | Total organic carbon (TOC) concentration Dissolved carbon concentration organic (DOC) Range (1,0 – 1000) mg/l |
Spectrometry method in the infrared range (IR) | PN-EN 1484:1999 | |
| 699 | Water, wastewater | Total phosphorus concentration Range (0,05 – 50) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 | |
| 700 | Water, wastewater | Dissolved oxygen concentration Range (0,5 – 12,0) mg/l |
Electrochemical method | PN-EN ISO 5814:2013-04 | |
| 701 | Water, wastewater | Biochemical oxygen demand BOD5 Range (3 – 1000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 702 | Water, wastewater | Biochemical oxygen demand BOD5 Range (0,5 – 6,0) mg/l O2 |
Electrochemical method | PN-EN 1899-2:2002 | |
| 703 | Water, wastewater | Total nitrogen concentration Range (0,5 – 250) mg/l |
Spectrophotometric method | M043 PB-1 issue 4 of 14.06.2016 based on Merck test 1.14537.0001 | |
| 704 | Water, wastewater | Total suspended solids (TSS) Range (2 – 1500) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 705 | Water, wastewater | Phosphate concentration Range (0,02 – 50) mg/l P Range (0,03 – 153) mg/l PO4 Range (0,02 – 115) mg/l P2O5 |
Spectrophotometric method | M701 PB-1 issue 4 of 07.06.2024, based on the Supelco test 1.14848.0001 | |
| 706 | Water, wastewater | Total phosphorus concentration Range (0,05 – 50) mg/l P Range (0,2 – 153) mg/l PO4 Range (0,1 – 115) mg/l P2O5 |
Spectrophotometric method | M702 PB-1 issue 4 of 07.06.2024, based on the Supelco test 1.14543.0001 | |
| 707 | Water, wastewater | Sulfide concentration Range (0,02 – 20) mg/l |
Spectrophotometric method | M703 PB-1 issue 3 of 15.06.2018 based on Merck test 1.14779.0001 | |
| 708 | Water, wastewater | Phenol index Range (0,1 – 100) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Method A | |
| 709 | Water, wastewater | Phenol index Range (0,005 – 0,1) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Method B | |
| 710 | Water, wastewater | Kjeldahl nitrogen concentration Range (0,7 – 250) mg/dm3 |
Titrimetric method | PN-EN 25663:2001 | |
| 711 | Water, wastewater | Total nitrogen concentration (calculated) | M043 PB-2 issue 2 of 13.03.2015 | ||
| 712 | Water, wastewater | Concentration of organic substances extractable with petroleum ether Range (0,5 – 2000) mg/l |
Gravimetric method | PN-86/C-04573-01 | |
| 713 | Water, wastewater | Concentration of anionic surfactants (anionic detergents) Range (0,1 – 10) mg/l |
Spectrophotometric method | PN-EN 903:2002 | |
| 714 | Water (including swimming pool water), water intended for human consumption | Permanganate index Range (0,5 – 10) mg/l O2 |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 715 | Water (including swimming pool water), water intended for human consumption | Anion concentrations nitrates (0,1 – 50) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 716 | Water (including swimming pool water), water intended for human consumption | Turbidity Range (0,10 – 20) NTU |
Nephelometric method | PN-EN ISO 7027:1-2016-09 | |
| 717 | Water (including swimming pool water), water intended for human consumption | Total chlorine concentration Range (0,05 – 5,0) mg/l Free chlorine concentration Range (0,05 – 5,0) mg/l |
Photometric method | M507 PB-1 issue 3 of 13.04.2021, based on HACH LANGE LCK310 | |
| 718 | Water (including swimming pool water), water intended for human consumption, wastewater | pH Range 4,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 719 | Sewage sludge | Relative volume (sludge settleability) Range (10 – 1000) ml/l |
Volumetric method | PN-EN 14702-1:2008 | |
| 720 | Sewage sludge | Sludge volume index (calculated) | PN-EN 14702-1:2008 | ||
| 721 | Chemical products - sodium hydroxide solution | Sodium hydroxide content Range (10,0 – 50,0) % |
Titrimetric method | PN-88/C-84002/02 | |
| 722 | Water intended for human consumption | Total viable count at 22°C | Plate method (pour plate) | PN-EN ISO 6222:2004 | |
| 723 | Water intended for human consumption | Coliform bacteria count | Membrane filtration method | PN-EN ISO 9308-1:2014-12 +A1:2017-04 | |
| 724 | Water intended for human consumption | Presence and count of intestinal enterococci | Membrane filtration method | PN-EN ISO 7899-2:2004 | |
| 725 | Water intended for human consumption, swimming pool water | Escherichia coli count | Membrane filtration method | PN-EN ISO 9308-1:2014-12 +A1:2017-04 | |
| 726 | Water intended for human consumption, swimming pool water | Total viable count at 36°C | Plate method (pour plate) | PN-EN ISO 6222:2004 | |
| 727 | Water intended for human consumption, swimming pool water | Pseudomonas aeruginosa bacteria count | Membrane filtration method | PN-EN ISO 16266:2009 | |
| 728 | Water intended for human consumption, swimming pool water | Combined chlorine concentration (calculated) | M507 PB-1 issue 3 of 13.04.2021, based on the HACH LANGE test LCK 310 | ||
| 729 | Water intended for human consumption | Legionella bacteria count Range from 1 CFU/100 ml from 1 CFU/1000 ml Matrix A; Procedure 5 (medium A – BCYE) Matrix A; Procedure 7 (medium C – GVPC) Matrix B; Procedure 7 (medium C – GVPC) |
Membrane filtration method | PN-EN ISO 11731:2017-08+Ap1:2019-12 | |
| 730 | Water (including swimming pool water) | Legionella bacteria count Range from 1 CFU/100 ml Matrix A; Procedure 5 (medium A – BCYE) Matrix A; Procedure 7 (medium C – GVPC) Matrix B; Procedure 7 (medium C – GVPC) |
Membrane filtration method | PN-EN ISO 11731:2017-08+Ap1:2019-12 | |
| 731 | Water, water intended for human consumption | Most probable number of coliform bacteria and Escherichia coli | MPN method | PN-EN ISO 9308-2:2014-06 | |
| 732 | Swimming pool water | Oxidation-reduction (redox) potential vs. Ag/AgCl 3,5 mol/l KCl Range (200 – 1000) mV |
Potentiometric method | M525 PB-1 issue 1 of 13.04.2021 | |
| Instrumental Laboratory | |||||
| 733 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, Other petroleum products: - petroleum distillates | Sulfur content Range (0,1 – 500) mg/kg |
Ultraviolet fluorescence method | PN-EN ISO 20846:2020-03 | |
| 734 | Liquid fuels: - unleaded petrols, diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Sulfur content Range (5,0 – 500) mg/kg |
Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) | PN-EN ISO 20884:2020 +A1:2022-03 | |
| 735 | Liquid fuels: - unleaded petrols, diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Sulfur content Range (0,0003 – 4,5) % (m/m) |
Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) | ASTM D 2622-24 a | |
| 736 | Liquid fuels: - unleaded petrol | Content of oxygenated organic compounds and total content of organically bound oxygen Ethers (0,20 – 20,00) % (m/m) % (v/v) Alcohols (0,20 – 12,00) % (m/m) ) % (v/v) Total oxygen content (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | ASTM D 4815-22 | |
| 737 | Liquid fuels: - unleaded petrol | Benzene content Range (0,1 – 20,0) % (v/v) |
Spectrometry method in the infrared range (IR) | PN-EN 238:2000+A1:2008 | |
| 738 | Liquid fuels: - unleaded petrol | Hydrocarbon group content Aromatic hydrocarbons Range (19,3 – 46,3) % (v/v) Olefinic hydrocarbons (0,4 – 26,8) % (v/v) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 22854:2025-07 procedure A | |
| 739 | Liquid fuels: - unleaded petrol | Content of oxygenated organic compounds and total content of organically bound oxygen Range (0,17 – 15,0) % (m/m) ) % (v/v) Organically bound oxygen (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13132:2005 | |
| 740 | Liquid fuels: - unleaded petrol | Octane number MON Range 40,0 – 100,0 |
Motor method | PN-EN ISO 5163:2014-08 | |
| 741 | Liquid fuels: - unleaded petrol | Octane number RON Range 40,0 – 100,0 |
Motor method | PN-EN ISO 5164:2014-08 | |
| 742 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Carbon, hydrogen and nitrogen content Carbon (75 – 87) % (m/m) Hydrogen (9 – 16) % (m/m) Nitrogen (0,1 – 2) % (m/m) |
High-temperature combustion with TCD detection | ASTM D 5291-21 Method C | |
| 743 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Content of aromatic hydrocarbon groups monocyclic aromatic hydrocarbons (MAH) Range (6,0 – 30,0) % (m/m) diaromatic hydrocarbons (DAH) (1,0 – 10,0) % (m/m) tri- and polycyclic aromatic hydrocarbons (T+AH) (0,1 – 2,0) % (m/m) polycyclic hydrocarbons (POLY-AH) (1,0 – 12,0) % (m/m) |
High-performance liquid chromatography with refractive index detection (HPLC-RID) | PN-EN 12916:2024-08 procedure A | |
| 744 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Total content of aromatic hydrocarbons (calculated) | PN-EN 12916:2024-08 procedure A | ||
| 745 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Lubricity Range (180 – 700) μm |
HFRR method | PN-EN ISO 12156-1:2024-02 | |
| 746 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Fatty acid methyl esters (FAME) content Range (0,05 – 20,0) % (v/v) |
Spectrometry method in the infrared range (IR) | PN-EN 14078:2014-06 | |
| 747 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Solvent RED 19 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method A | |
| 748 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | BLUE 35 dye content Range (1,0 – 15,0) mg/l |
Spectrophotometric method | PN-C-04426:2013-07 Method C | |
| 749 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cetane number Range 30,0 – 65,0 |
Motor method | PN-EN ISO 5165:2021-02 | |
| 750 | Liquid fuels: - unleaded petrol, Other petroleum products petroleum with a boiling range 10°C-225°C, components: - petrol fractions | Detailed composition for hydrocarbons up to n-nonane (C9) Range (0,05 –90) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | ASTM D5134-21 | |
| 751 | Other petroleum products: - paving and industrial bitumens and bituminous products | Carbon, hydrogen and nitrogen content Carbon (75 – 87) % (m/m) Hydrogen (9 – 16) % (m/m) Nitrogen (0,1 – 2) % (m/m) |
High-temperature combustion with TCD detection | ASTM D 5291-21 Method C | |
| 752 | Gaseous fuels: - LPG, liquefied petroleum gases | Sulfur content Range (1,0 – 100) mg/kg |
Ultraviolet fluorescence method | ASTM D 6667-21 | |
| 753 | Gaseous fuels: - LPG, liquefied petroleum gases | Hydrocarbon composition Range (0,1 – 99,9) % (m/m) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 754 | Gaseous fuels: - LPG, liquefied petroleum gases | Total diene content (as 1,3-butadiene) Range (0,1 – 1,0) % (mol/mol) |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN 27941:2015-12 | |
| 755 | Gaseous fuels: - LPG, liquefied petroleum gases | Density at 15°C (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | ||
| 756 | Gaseous fuels: - LPG, liquefied petroleum gases | Vapour pressure estimated at temperatures: -10°C, -5°C, 0°C, 10°C, 37,8°C, 40°C, 50°C, 70°C (calculated) | PN-EN ISO 8973:2000+A1:2020-10 | PN-EN 589:2024-08 Annex C | ||
| 757 | Gaseous fuels: - LPG, liquefied petroleum gases | Motor octane number (MON) (calculated) | PN-EN 589:2024-08 Annex B | ||
| 758 | Gaseous fuels: - LPG, liquefied petroleum gases | Composition of refinery gases: H2, C1 – C5 hydrocarbons determined as individual components, unsaturated C5 and C6 as one group Range (0,1 – 99,9) % (mol) |
Gas chromatography with flame ionization detection (GC-FID) | UOP 539-12 | |
| 759 | Gaseous fuels: - LPG, liquefied petroleum gases | Copper strip corrosion Range corrosion class 1 – 4 |
Visual method | PN-EN ISO 6251:2001 | |
| 760 | Gaseous fuels: - LPG, liquefied petroleum gases | Water content Range present/absent |
Visual method | PN-EN 15469:2009 | |
| 761 | Gaseous fuels: - LPG, liquefied petroleum gases | Temperature at which the estimated relative vapour pressure is not less than 200 kPa (calculated) | PN-EN 589:2024-08 Annex C | ||
| 762 | Gaseous fuels: - LPG | Soluble residue Range (5 – 100) mg/kg |
Gravimetric method | PN-EN 15471:2017-08 | |
| 763 | Water, water intended for human consumption, wastewater | Element concentration Ag (0,4 – 10) μg/l Al (2 – 200) μg/l As (2 – 100) μg/l Cd (0,2 – 5) μg/l Co (2 – 60) μg/l Cr (1 – 60) μg/l Cu (1– 2000) μg/l Fe (2 – 200) μg/l Mn (1 – 40) μg/l Mo (2 – 60) μg/l Ni (2 – 70) μg/l Pb (2 – 100) μg/l Se (3 – 150) μg/l V (3 – 200) μg/l Zn (0,5 – 20) μg/l |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-EN ISO 15586:2005 | |
| 764 | Water, water intended for human consumption, wastewater | Mercury concentration Range (0,05 – 10,0) μg/l |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012+Ap1:2016-07 | |
| 765 | Water, wastewater | Mineral oil index Range (0,10 – 600) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 766 | Water | Zinc concentration Range (0,02 – 2,0) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 Method A | |
| 767 | Water | Sodium concentration Range (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-1:1994+Ap1:2009 | |
| 768 | Water | Potassium concentration Range (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-ISO 9964-2:1994 | |
| 769 | Water | Calcium and magnesium concentration calcium (1 – 500) mg/l magnesium (1 – 500) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN ISO 7980:2002 | |
| Physico-Chemistry Laboratory | |||||
| 770 | Crude oil | Water content Range (0,02 – 2,0) % (m/m) |
Potentiometric titration method | ASTM D 4377-00(2011) | |
| 771 | Crude oil | Water content Range (0,025 – 5,0) % (m/m) |
Distillation method | PN-EN ISO 9029:2005 | ASTM D 4006-22 | |
| 772 | Crude oil | Water content Range (0,02 – 4,70) % (m/m) |
Coulometric titration method | ASTM D 4928-24 procedure A | |
| 773 | Liquid fuels: - marine fuels, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Water content Range (0,03 – 25,0) % (m/m) |
Distillation method | PN-ISO 3733:2008 | ASTM D 95-23e1 | |
| 774 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, kerosene, aviation turbine fuel, aviation gasoline, liquid biofuels: fatty acid methyl esters (FAME), Lubricants: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates, Chemical products: - additives for liquid fuels and lubricants | Density at 15°C and 20°C Range (643,0 – 1037,0) kg/m3 Range (0,6430 – 1,0370) g/cm3 |
Oscillation method | PN-EN ISO 12185:2024-08 | ASTM D 4052-22 | |
| 775 | Crude oil | Density at 15°C and 20°C Range (643,0 – 1037,0) kg/m3 Range (0,6430 – 1,0370) g/cm3 |
Oscillation method | PN-EN ISO 12185:2024-08 | |
| 776 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Copper strip corrosion Range corrosion class 1 – 4 |
Visual method | PN-EN ISO 2160:2004 | |
| 777 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Copper strip corrosion Range corrosion class 1a – 4c |
Visual method | ASTM D 130-19 | |
| 778 | Liquid fuels: - unleaded petrols, diesel fuels, light fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Water content Range (0,003 – 0,100) % (m/m) |
Coulometric titration method | PN-EN ISO 12937:2005 +Ap.1:2021-11 | ASTM D 6304-20 | |
| 779 | Liquid fuels: - unleaded petrols, diesel fuels, heating oil, marine fuel, kerosene, aviation turbine fuel, aviation gasoline, Other petroleum products: - petroleum distillates, light fuel components, Crude oil | Fractional composition Range (20,0 – 380,0) °C |
Distillation method | PN-EN ISO 3405:2019-05 | ASTM D 86-23ae2 | |
| 780 | Liquid fuels: - unleaded petrol | Volatility index (calculated) | PN-EN 228+A1:2017-06 Table NA.2 | ||
| 781 | Liquid fuels: - unleaded petrols, Other petroleum products: - petroleum distillates, light fuel components | Air saturated vapour pressure Range (9,0 – 110,0) kPa |
Mini Reid method | PN-EN 13016-1:2024-11 | ASTM D 5482-20a | |
| 782 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel | Hydrocarbon group content aromatic hydrocarbons Range (5,0 – 80,0) % (v/v) olefinic hydrocarbons (0,3 – 15,0) % (v/v) |
Gel permeation chromatography method | PN-EN 15553+A1:2025-05 | ASTM D 1319-20a | |
| 783 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel | Gum content existent gums, washed gums Range (1 – 30) mg/100 ml unwashed gums (1 – 60) mg/100 ml |
Gravimetric method | PN-EN ISO 6246:2017-05/A1:2020-03 | ASTM D 381-25 | |
| 784 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel, Other petroleum products: - paraffin waxes, slack wax | Colour Range 30 – (-16) |
Spectrophotometric method | ASTM D 6045-20 | |
| 785 | Liquid fuels: - unleaded petrols, kerosene, aviation turbine fuel, Other petroleum products: - paraffin waxes, slack wax | Colour Range 30 – (-16) |
Visual method | ASTM D 156-23 | |
| 786 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 0,5 – 8,0 |
Spectrophotometric method | ASTM D 6045-20 | |
| 787 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 30 – (-16) |
Visual method | ASTM D 156-23 | |
| 788 | Liquid fuels: - diesel fuels, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, Other petroleum products: - paraffin waxes, slack wax, petroleum distillates | Colour Range 0,5 – 8,0 |
Visual method | ASTM D 1500-24 | |
| 789 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Kinematic viscosity at temperatures: (-20°C, 20°C, 40°C, 50°C, 100°C) Range (1,000 – 1100) mm2/s Dynamic viscosity (calculated) |
Capillary method | PN-EN ISO 3104:2024-01 | ASTM D 445-24 | |
| 790 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Flash point Range (40,0 – 320,0)°C |
Pensky-Martens closed cup method | PN-EN ISO 2719:2016-08 +A1:2021-06 | ASTM D 93-25 | |
| 791 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Flash point and fire point Range (80 – 360) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | ASTM D 92-24 | |
| 792 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, kerosene, aviation turbine fuel, Lubricating materials: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - paraffins, slack wax, petroleum distillates | Gross calorific value Range (30,00 – 50,00) MJ/kg Net calorific value (calculated) |
Calorimetric method | PN-C-04062:2018-05 | |
| 793 | Liquid fuels: - diesel fuels, heating oil, marine fuel, Lubricants: - base oils, engine oils, industrial lubricating oils, used oils, Other petroleum products: - petroleum distillates | Carbon residue Range (0,01 – 24,00) % (m/m) |
Gravimetric method | PN-EN ISO 10370:2014-12 | ASTM D 4530-25 | |
| 794 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, Lubricants: -base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Pour point Range (- 45)°C – 30°C |
Optical method | PN-EN ISO 3016:2019-06 | |
| 795 | Liquid fuels: - diesel fuels, fuel oil, marine fuel, Lubricants: -base oils, engine oils, industrial lubricating oils, Other petroleum products: - petroleum distillates | Residue after incineration Range (0,001 – 0,180) % (m/m) |
Gravimetric method | PN-EN ISO 6245:2008 | ASTM D 482-19 | |
| 796 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ASTM D 4737-21 | ||
| 797 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cold filter plugging point Range (-40) °C – 10 °C |
Optical method | PN-EN 116:2015-09 | ASTM D 6371-24 | |
| 798 | Liquid fuels: - diesel fuels, light fuel oil, marine fuel, Other petroleum products: - petroleum distillates | Cloud point Range (-60,0) °C – 40,0 °C |
Optical method | ASTM D 5773-21 | |
| 799 | Liquid fuels: - kerosene, aviation turbine fuel | Flash point Range (35,0 – 65,0) °C for liquids with viscosity: < 5,5 mm2/s at 40°C, < 9,5 mm2/s at 25°C |
TAG closed cup method | PN-V-04043:2002 | ASTM D 56-22 | |
| 800 | Liquid fuels: - kerosene, aviation turbine fuel | Crystallisation temperature Range (-70)°C – (-30)°C |
Visual method | ASTM D 2386-19 | |
| 801 | Liquid fuels: - kerosene, aviation turbine fuel | Cetane index (calculated) | PN-EN ISO 4264:2018-08 | ASTM D 4737-21 | ||
| 802 | Liquid fuels: - kerosene, aviation turbine fuel | Water separation index (WSIM) Range 0 – 100 |
Turbidimetric method | ASTM D 3948-22 | |
| 803 | Liquid fuels: - kerosene, aviation turbine fuel | Oxidation stability at 260°C Range deposits on the tube 0 – 4 A,P Pressure drop across the filter (0,1 – 200) mm Hg |
JFTOT method | ASTM D 3241-24 excluding A2, A3 and A4 | |
| 804 | Liquid fuels: - kerosene, aviation turbine fuel, Other petroleum products: - fuel components for aviation turbine engines | Maximum height of a smokeless flame Range (15,0 – 40,0) mm |
Visual method | ASTM D 1322-25 | |
| 805 | Liquid fuels: - fuel oil, marine fuel | Total sediment content Range (0,01 – 0,50) % (m/m) |
Gravimetric method | PN-ISO 10307-1:2010 | PN-ISO 10307-2:2010 | |
| 806 | Liquid fuels: - fuel oil, marine fuel | Sulfated ash content Range (0,05 – 2,00) % (m/m) |
Gravimetric method | PN-ISO 3987:2014-05 | ASTM D 874-23 | |
| 807 | Other petroleum products: - slack waxes, paraffin waxes, ceresins, petroleum distillates | Oil content Range (0,5 – 15) % (m/m) |
Gravimetric method | ASTM D 721-25 | |
| 808 | Other petroleum products: - slack waxes, paraffin waxes, ceresins, petroleum distillates | Freezing point Range (30,0 – 90,0) °C |
Visual method | PN-ISO 2207:2011 | ASTM D 938-25 | |
| 809 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils | WL index (calculated) | ASTM D 2270-24 | PN-ISO 2909:2009+Ap1:2010 | ||
| 810 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils | Sulfated ash content Range (0,05 – 2,00) % (m/m) |
Gravimetric method | PN-ISO 3987:2014-05 | ASTM D 874-23 | |
| 811 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Chemical products: - lubricant additives | Base number Range (1,0 – 100,0) mg KOH/g |
Potentiometric titration method | ASTM D 2896-21 procedure B | |
| 812 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Chemical products: - lubricant additives | Base number Range (1,0 – 100,0) mg KOH/g |
Potentiometric titration method | PN-ISO 3771:2012 | |
| 813 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Liquid fuels: - diesel fuels | Acid value Range (0,01 – 8,0) mg KOH/g |
Potentiometric titrimetric method | ASTM D 664-24 | |
| 814 | Lubricants: - base oils, engine oils, industrial lubricating oils, waste oils, Other petroleum products: - petroleum distillates, Liquid fuels: - diesel fuels | Acid value Range (0,01 – 8,0) mg KOH/g |
Potentiometric titrimetric method | PN-ISO 6619:2011 | |
| 815 | Liquid fuels: - diesel fuels, light heating oil | Impurity content Range (4,0 – 30,0) mg/kg |
Gravimetric method | PN-EN 12662-1:2024-11 | |
| Continuous Operation Samplers Department | |||||
| 816 | Liquid fuels - unleaded petrols, diesel fuels, marine fuel, kerosene, aviation turbine fuel, heating oils, Lubricants - base oils, engine oils, industrial lubricating oils, Other petroleum products - petroleum distillates | Sampling from tanks for chemical and physical testing | PN-EN ISO 3170:2006 | ||
| 817 | Liquid fuels: - unleaded petrols, diesel fuels | Sampling for chemical and physical testing | PN-EN 14275:2013-06 | ||
| 818 | Gaseous fuels: - LPG | Sampling for chemical and physical testing | ZN/MG/CN-18:2007 | ||
| 819 | Gaseous fuels: - LPG, liquefied petroleum gases | Sampling for chemical and physical testing | PN-EN ISO 4257:2004 | ||
| 820 | Water | Sampling for chemical and physical testing Temperature of the water sample taken Range (0,5 – 50,0) °C |
PN-ISO 5667-5:2017-10 | PN-EN ISO 5667-6:2016-12 excluding cl. 7.5, 7.6 | PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.2, 6.3 | PN-77/C-04584 | ||
| 821 | Wastewater | Sampling for chemical and physical testing Temperature of the collected wastewater sample Range (0,5 – 50,0) °C |
Manual method; Automatic method | PN-ISO 5667-10:2021-11 | PN-77/C-04584 | |
| 822 | Water intended for human consumption, Swimming pool water | Sampling for microbiological testing | PN-EN ISO 19458:2007 | ||
| 823 | Swimming pool water | Sampling for chemical and physical testing Temperature of the water sample taken Range (0,5 – 50,0) °C |
M535 PB-1 issue 3 of 12.09.2023 | PN-77/C-04584 | ||
| Continuous Operation Testing Laboratory | |||||
| 824 | Other petroleum products: - paving and industrial bitumens and bituminous products | Needle penetration at 25°C Range (1 – 330) 0,1 mm |
Needle penetration method | PN-EN 1426:2025-02 | |
| 825 | Other petroleum products: - paving and industrial bitumens and bituminous products | Softening point Range (30 – 110) °C |
Ring and Ball method | PN-EN 1427:2015-08 | |
| 826 | Other petroleum products: - paving and industrial bitumens and bituminous products | Resistance to ageing under the influence of heat and air Range (-0,10 – (+0,15)) % (m/m) Percentage of retained penetration % (calculated) Change in softening point °C (calculated) |
RTFOT method | PN-EN 12607-1:2025-02 | |
| 827 | Other petroleum products: - paving and industrial bitumens and bituminous products | Brittleness temperature Range (-25)°C – (+10)°C |
Fraass method | PN-EN 12593:2015-08 | |
| 828 | Other petroleum products: - paving and industrial bitumens and bituminous products | Flash point and fire point Range (250 – 360) °C |
Cleveland open cup method | PN-EN ISO 2592:2017-10 | ASTM D 92-24 | |
| 829 | Other petroleum products: - paving and industrial bitumens and bituminous products | Elastic recovery Range (40 – 100) % |
Ductilometric method | PN-EN 13398:2017-12 | |
| 830 | Other petroleum products: - paving and industrial bitumens and bituminous products | Tensile force (cohesion energy) Range (4,0 – 10,0) J/cm2 |
Ductilometric method | PN-EN 13589:2018-08 | |
| 831 | Other petroleum products: - paving and industrial bitumens and bituminous products | Density and relative density Range (0,950 – 1,080) g/cm3 |
Pycnometric method | PN-EN 15326+A1:2010 | |
Reference standards (474)
ASTM D 1094-24
ASTM D 1159-23
ASTM D 1209-25
ASTM D 1298-12b (2017)
ASTM D 130-19
ASTM D 1319-20a
ASTM D 1322-25
ASTM D 1492-21
ASTM D 1500-24
ASTM D 156-23
ASTM D 1840-24
ASTM D 1946-24
ASTM D 2270-24
ASTM D 2386-19
ASTM D 2622-24 a
ASTM D 2624-24
ASTM D 2892-25
ASTM D 2896-21 procedure B
ASTM D 3227-24
ASTM D 3241-24
ASTM D 3241-24 excluding A2, A3 and A4
ASTM D 3242-23
ASTM D 3338/D 3338M-20a
ASTM D 3343-22
ASTM D 381-25
ASTM D 3948-22
ASTM D 4006-22
ASTM D 4052-22
ASTM D 4294-24
ASTM D 4377-00 (2011)
ASTM D 4377-00(2011)
ASTM D 445-24
ASTM D 4530-25
ASTM D 473-22
ASTM D 4735-19
ASTM D 4737-21
ASTM D 4815-22
ASTM D 482-19
ASTM D 4870-22
ASTM D 4928-12(2018)
ASTM D 4928-24 procedure A
ASTM D 4929-22 Method B
ASTM D 4951-14(2019)
ASTM D 5001-25
ASTM D 5002-22
ASTM D 5006-25
ASTM D 5134-21
ASTM D 5236-25
ASTM D 5291-21 Method D
ASTM D 5291-21 Method C
ASTM D 5293-20
ASTM D 5452-23
ASTM D 5453-24
ASTM D 5482-20a
ASTM D 56-22
ASTM D 5708-15 (Reapproved 2020)e1 – Method A
ASTM D 5772-21
ASTM D 5773-21
ASTM D 5808-23
ASTM D 5972-25
ASTM D 6045-20
ASTM D 6304-20
ASTM D 6371-24
ASTM D 6379-21e1
ASTM D 664-24
ASTM D 665-24
ASTM D 6667-21
ASTM D 7183-23
ASTM D 7184-24
ASTM D 721-25
ASTM D 7224-23
ASTM D 7501-22
ASTM D 7504-23
ASTM D 7606-24a
ASTM D 7650-21 excluding 7.9
ASTM D 7651-24e1
ASTM D 7651:24e1
ASTM D 7652-11
ASTM D 7678-17(2022)
ASTM D 7797-23
ASTM D 7892-25
ASTM D 847-23
ASTM D 848-23
ASTM D 850-21
ASTM D 852-24
ASTM D 86-23ae2
ASTM D 86-23aɛ2
ASTM D 874-23
ASTM D 92-24
ASTM D 93-25
ASTM D 938-25
ASTM D 95-23e1
ASTM D 95-23ɛ1
ASTM D 97-17b(2022)
ASTM D5134-21
ASTM D7941/D7941M-23
DIN 51430:2018-02
DIN 51619:2004-02
GOST 2177-99 Method B
ILIADe 606:2024 procedure B
IP 540/08(2019)
IP 565-13
IP 570/15(2021)
ISO 14687:2019-11
ISO 14687:2019-11 cl. 5.1
ISO 19880-09:2024 excluding Annex A, C, D, E, F
ISO 19880-1:2020-03 Annex K cl. K1, K2, K3
ISO 19880-1:2020-03 Annex K cl. K1, K2, K7 excluding cl. K.7.1
ISO 19880-9:2024-07 excluding Annex A, B, C, E, F
ISO 21087:2019-06 cl. 8
Instruction IT-M/PP6/95 issue 2 of 11.03.2024
Instruction IT-M/PP6/96 issue 2 of 11.03.2024
Instruction IT-M/PP6/97 issue 3 of 25.03.2024
Instruction IT-M/PP6/97 issue 3 of 25.03.2024; NPL Report AS64:2011-08 p. 4.2.7 (a), p. 4.2.8 (b), p. 4.2.2 (a)
Instruction IT-M/PP6/98 issue 3 of 25.03.2024
Instruction IT-M/TT1/102 issue 1 of 24.06.2024
Instruction IT-M/TT1/97 issue 1 of 24.05.2024
Instruction IT-M/TT1/99 issue 1 of 04.06.2024
Instruction IT-M/TT1/99 issue 1 of 04.06.2024; NPL Report AS64:2011-08 p. 4.2.7 (a), p. 4.2.2 (a)
JIS K0127:2013
M042 PB-1 issue 4 of 01.06.2018 based on Merck test 1.14752.0001
M043 PB-1 issue 4 of 14.06.2016 based on Merck test 1.14537.0001
M043 PB-2 issue 2 of 13.03.2015
M507 PB-1 issue 3 of 13.04.2021, based on HACH LANGE LCK310
M507 PB-1 issue 3 of 13.04.2021, based on the HACH LANGE test LCK 310
M514 PB-1 issue 3 of 05.03.2025 based on Merck test 1.01846.0001
M525 PB-1 issue 1 of 13.04.2021
M535 PB-1 issue 3 of 12.09.2023
M701 PB-1 issue 4 of 07.06.2024, based on the Supelco test 1.14848.0001
M702 PB-1 issue 4 of 07.06.2024, based on the Supelco test 1.14543.0001
M703 PB-1 issue 3 of 15.06.2018 based on Merck test 1.14779.0001
Method 032 issue 7 of 19.02.2026
Method 041 issue 6 of 14.11.2024
Method 047 issue 5 of 19.11.2019
Method 048 cl. 1.1 issue 4 of 27.12.2023
Method 103 issue 3 of 07.01.2022
Method 106 issue 3 of 21.12.2020
Method 118 issue 7 of 07.04.2026
Method 125 issue 2 of 16.07.2020
Method 159 issue 3 of 14.12.2020
Method No. 031 issue 5 of 20.02.2026
Method No. 045 issue 3 of 19.02.2026
Method No. 047 issue 5 of 19.11.2019
Method No. 115 issue 4 of 18.12.2020
Method No. 117 issue 4 of 05.12.2025
Method No. 122 issue 4 of 05.12.2025
Method No. 124 issue 2 of 03.06.2020
Method No. 125 issue 2 of 16.07.2020
Method No. 126 issue 4 of 05.12.2025
Method No. 127 issue 4 of 05.12.2025
Method No. 128 issue 4 of 05.12.2025
Method No. 129 issue 4 of 05.12.2025
Method No. 130 issue 4 of 05.12.2025
Method No. 132 issue 3 of 12.01.2023
Method No. 133 issue 4 of 05.12.2025
Method No. 179 issue 3 of 13.12.2023
Method No. 184 issue 2 of 13.12.2023
Method No. 192 issue 1 of 26.09.2019
Method No. 193 issue 1 of 26.09.2019, Spectroquant test 1.14561.0001
Method No. 194 issue 1 of 26.09.2019
Method No. 195, issue 1 of 26.09.2019; HACH test No. 8021 (free chlorine)
Method No. 201 issue 1 of 26.09.2019
Method No. 202 issue 1 of 26.09.2019
Method No. 213 issue 1 of 08.09.2025
NO-91-A258-1:2024 cl. 2.1
NPL Report AS64:2011-08 p. 4.2.1 (a)
NPL Report AS64:2011-08 p. 4.2.4 (a)
NPL Report AS64:2011-08 p. 4.2.6 (b), p. 4.2.5 (a), p. 4.2.3 (a)
NPL Report AS64:2011-08 p. 4.2.4 (a)
NPL Report AS64:2011-08 p.4.2.6 (b), p.4.2.5 (a), p. 4.2.3 (a), p. 4.2.8 (a)
PN ISO 3987:2014-05
PN –EN ISO 8754:2007+Ap1:2014-02
PN- EN ISO 12205:2011
PN-55/C-04020
PN-71/Z-04041
PN-71/Z-04058
PN-74/C-04578-03
PN-75/C-04563-01
PN-75/Z-04037/03
PN-76/Z-04045.02
PN-77/C-04584
PN-78/C-04541 cl. 4.1
PN-81/Z-04134.02
PN-82/C-04576.08
PN-82/C-04576/08
PN-82/Z-04093.03
PN-85/C-04093 Method B
PN-85/Z-04015.10
PN-86/C-04573-01
PN-86/C-04573/01
PN-87/Z-04126/02
PN-88/C-84002/02
PN-88/Z-04203.02
PN-89/Z-04209.02
PN-92/C-04590/03
PN-93/C-40008/10
PN-A-79528-3:2007 cl. 5.2
PN-C 04554-4:1999 Annex A
PN-C-04062:2018-05
PN-C-04150:2004
PN-C-04426:2013-07 Method A
PN-C-04426:2013-07 Method B
PN-C-04426:2013-07 Method C
PN-C-04554-4:1999 Annex A
PN-C-04604-08:1977
PN-C-04643:1994
PN-C-96008:1998 cl. 4.4.10
PN-C-96008:1998 cl. 4.4.2
PN-C-96008:1998 cl. 4.4.4
PN-C-96008:1998 cl. 4.4.5
PN-C-96008:1998 cl. 4.4.6
PN-C-96008:1998 cl. 4.4.8
PN-C-96008:1998 cl. 4.4.9
PN-C-96060:2019-03 procedure A
PN-EN 116:2015-09
PN-EN 12592:2014-12
PN-EN 12593:2015-08
PN-EN 12595:2024-01
PN-EN 12596:2024-01
PN-EN 12606-1:2015-08
PN-EN 12607-1:2025-02
PN-EN 12607-2:2014-12
PN-EN 12662-1:2024-11
PN-EN 12662-2:2024-11
PN-EN 12916:2024-08 procedure A
PN-EN 13016-1:2024-11
PN-EN 13132:2005
PN-EN 13211:2006
PN-EN 13303:2017-10
PN-EN 13398:2017-12
PN-EN 13399:2017-12
PN-EN 13589:2018-08
PN-EN 13649:2005
PN-EN 14078:2014-06
PN-EN 14103:2020-06
PN-EN 14104:2021-06
PN-EN 14105:2025-04
PN-EN 14107:2004
PN-EN 14110:2019-05
PN-EN 14110:2019-05 excluding procedure A
PN-EN 14111:2022-11
PN-EN 14112:2021-05
PN-EN 14253+A1:2011
PN-EN 1426:2025-02
PN-EN 14275:2013-06
PN-EN 1427:2015-08
PN-EN 14385:2025:05
PN-EN 14538:2008
PN-EN 14702-1:2008
PN-EN 1484:1999
PN-EN 15216:2022-03
PN-EN 15326+A1:2010
PN-EN 15469:2009
PN-EN 15470:2017-08
PN-EN 15471:2017-08
PN-EN 15486:2009
PN-EN 15487:2009
PN-EN 15488:2009
PN-EN 15489:2009
PN-EN 15491:2025-08
PN-EN 15492:2012
PN-EN 15553+A1:2025-05
PN-EN 15691:2023-11
PN-EN 15721:2013-10 procedure A
PN-EN 15751:2014-05
PN-EN 15769:2010
PN-EN 15779+A1:2013-12
PN-EN 15934:2013-02
PN-EN 15934:2013-02 Method A
PN-EN 15935:2022-01
PN-EN 16135 :2012
PN-EN 16576:2014-12+Ap1:2017-11
PN-EN 16715:2015-09
PN-EN 1838:2025-05 excluding clauses 5.1.3, 5.1.4, 5.2.3, 5.2.4, 5.3.4, 5.3.5, 5.3.7, 6.0 of the standard
PN-EN 1899-2:2002
PN-EN 1911:2011
PN-EN 228+A1:2017-06 Table NA.2
PN-EN 228+A1:2017-06 cl. 5.5.2
PN-EN 237:2007
PN-EN 238:2000+A1:2008
PN-EN 25663:2001
PN-EN 25663:2001 excluding cl. 11.1
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 27941:2015-12
PN-EN 589:2019-04 Annex C
PN-EN 589:2024-08 Annex A
PN-EN 589:2024-08 Annex B
PN-EN 589:2024-08 Annex C
PN-EN 872:2007+Ap1:2007
PN-EN 903:2002
PN-EN ISO 10301:2002
PN-EN ISO 10304-1:2009+AC:2012
PN-EN ISO 10304-4:2022-08
PN-EN ISO 10370:2014-12
PN-EN ISO 10523:2012
PN-EN ISO 11731:2017-08+Ap1:2019-12
PN-EN ISO 11885:2009
PN-EN ISO 12156-1:2024-02
PN-EN ISO 12185:2024-08
PN-EN ISO 12846:2012+Ap1:2016-07
PN-EN ISO 12937:2005 +Ap.1:2021-11
PN-EN ISO 12937:2005+Ap1:2021-11
PN-EN ISO 14596:2009
PN-EN ISO 15586:2005
PN-EN ISO 16266:2009
PN-EN ISO 16703:2011
PN-EN ISO 17294-2:2024-04
PN-EN ISO 17852:2009
PN-EN ISO 18412:2007
PN-EN ISO 19458:2007
PN-EN ISO 19458:2007 excluding cl. 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6
PN-EN ISO 20846:2020-03
PN-EN ISO 20884:2020 +A1:2022-03
PN-EN ISO 20884:2020-03 +A1:2022-03
PN-EN ISO 2160:2004
PN-EN ISO 21877:2020-03
PN-EN ISO 22854:2025-07 procedure A
PN-EN ISO 2592:2017-10
PN-EN ISO 2719:2016-08 +A1:2021-06
PN-EN ISO 2719:2016-08+A1: 2021-06 excluding procedure C
PN-EN ISO 2719:2016-08+A1:2021-06
PN-EN ISO 3015:2019-06
PN-EN ISO 3016:2019-06
PN-EN ISO 3104:2024-01
PN-EN ISO 3104:2024-01 procedure A
PN-EN ISO 3170:2006
PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7- 8.9, 9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7 - 8.9, 9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7, 8.8, 9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.3 - 8.3.1.6, 8.3.1.8, 8.3.2, 8.7, 8.8,9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.3, 8.3.1.5, 8.3.1.6, 8.3.1.8, 8.3.2, 8.7-8.9, 9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.3- 8.3.1.6, 8.3.1.8, 8.3.2, 8.7- 8.9, 9.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding 8.3.1.5, 8.3.1.8, 8.3.2, 8.7,8.8, 10.6, 10.7
PN-EN ISO 3170:2025-12 excluding cl. 8.3.1.3- 8.3.1.5, 8.3.1.8, 8.3.2, 8.5 - 8.9, 9.8, 10.6, 10.7
PN-EN ISO 3405:2019-05
PN-EN ISO 3405:2019-05 excluding cl. 9
PN-EN ISO 3405:2019-05 excluding cl. 9
PN-EN ISO 3675:2004
PN-EN ISO 3735:2001
PN-EN ISO 4257:2004
PN-EN ISO 4257:2004 ZN/MG/CN-18:2007
PN-EN ISO 4264:2018-08
PN-EN ISO 5163 :2014-08
PN-EN ISO 5163:2014-08
PN-EN ISO 5164 :2014-08
PN-EN ISO 5164:2014-08
PN-EN ISO 5165:2021-02
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015-11
PN-EN ISO 5667-6:2016-12 excluding 7.6, 9.4 Method No. 111 issue 5 of 01.07.2020
PN-EN ISO 5667-6:2016-12 excluding cl. 7.5, 7.6
PN-EN ISO 5814:2013-04
PN-EN ISO 5815-1 :2019-12
PN-EN ISO 5815-1:2019-12
PN-EN ISO 6222:2004
PN-EN ISO 6245:2008
PN-EN ISO 6246:2017-05 +A1:2020-03
PN-EN ISO 6246:2017-05/A1:2020-03
PN-EN ISO 6251:2001
PN-EN ISO 6468:2002
PN-EN ISO 6878:2006 cl. 8 +Ap1:2010+Ap2:2010
PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010
PN-EN ISO 6878:2006+Ap1:2010 +Ap2:2010 cl. 8
PN-EN ISO 6976:2016-11
PN-EN ISO 7027-1:2016-09
PN-EN ISO 7027:1-2016-09
PN-EN ISO 7243:2018-01+Ap2:2020-04
PN-EN ISO 7393-1:2011
PN-EN ISO 7536:2011
PN-EN ISO 7730:2006+Ap1:2014
PN-EN ISO 7887:2012+Ap1:2015 Method C
PN-EN ISO 7887:2012+Ap1:2015 Method D
PN-EN ISO 7887:2012+Ap1:2015-06 Method C
PN-EN ISO 7899-2:2004
PN-EN ISO 7980:2002
PN-EN ISO 8467:2001
PN-EN ISO 8754:2007+Ap1:2014-02
PN-EN ISO 8819:2000
PN-EN ISO 8973:2000+A1:2020-10
PN-EN ISO 9029:2005
PN-EN ISO 9308-1:2014-12 +A1:2017-04
PN-EN ISO 9308-2:2014-06
PN-EN ISO 9377-2:2003
PN-EN ISO 9612:2011 excluding the method covering strategies 2 and 3 – cl. 10 and 11
PN-EN ISO 9963-1:2001+Ap1:2004
PN-IEC 997:1998
PN-ISO 10307-1:2010
PN-ISO 10307-2:2010
PN-ISO 11423-1:2002
PN-ISO 11465:1999
PN-ISO 15705:2005
PN-ISO 2137:2021-07
PN-ISO 2176:2011+A1:2021-07
PN-ISO 2207:2011
PN-ISO 2909:2009+Ap1:2010
PN-ISO 3733:2008
PN-ISO 3771:2012
PN-ISO 3987:2014-05
PN-ISO 5664:2002
PN-ISO 5667-10:2021-11
PN-ISO 5667-10:2021-11 Method No. 111 issue 5 of 01.07.2020
PN-ISO 5667-11:2017-10 excluding cl. 4.2.2, 4.2.4, 4.3, 6.2, 6.3 Method No. 111 issue 5 of 01.07.2020
PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.2, 6.3
PN-ISO 5667-5:2017-10
PN-ISO 5667-5:2017-10 Method No. 111 issue 5 of 01.07.2020
PN-ISO 6058:1999
PN-ISO 6059:1999
PN-ISO 6060:2006
PN-ISO 6296:2011
PN-ISO 6332:2001+Ap1:2016
PN-ISO 6332:2001+Ap1:2016-6
PN-ISO 6439:1994
PN-ISO 6439:1994 Method A
PN-ISO 6439:1994 Method B
PN-ISO 6439:1994 Method B
PN-ISO 6614:2010+A1:2022-05
PN-ISO 6615:2012
PN-ISO 6618:2011
PN-ISO 6619:2011
PN-ISO 7120:2011
PN-ISO 7120:2011 procedure A and B
PN-ISO 7150-1:2002
PN-ISO 7941:1993+Ap1:2002
PN-ISO 8288:2002 Method A
PN-ISO 9120:2009+Ap1:2022-04
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-ISO 9964-1:1994+Ap1:2009
PN-ISO 9964-2:1994
PN-N-01307:1994
PN-V-04031:2000
PN-V-04043:2002
PN-Z-04007-2:1994
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04015-12:1996+Ap1:2001
PN-Z-04015-13:1996
PN-Z-04044:1970
PN-Z-04108-06:2006+Az1:2009
PN-Z-04240-5:2006
PN-Z-04252-1:2012
PN-Z-04252-2:2012
PN-Z-04291:2003
PN-Z-04300:2002
PN-Z-04323:2004
PN-Z-04381:2010
PN-Z-04434:2011
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04438:2021-07
PN-Z-04450:2014-08
PN-Z-04469:2025-02
PN-Z-04472:2015-10+Ap:1:2015-12
PN-Z-04487:2017-10
PN-Z-04502:2019-10
PN-Z-04507:2022-05+Ap1:2022-08
Principles and Methods of Assessing the Working Environment 2012 No. 1(71) + 2017 No. 2 (92)
Principles and Methods of Assessing the Working Environment 2012, No. 4 (74), pp. 117–130
Principles and Methods of Assessing the Working Environment 2014, No. 3(81), pp. 89 – 101
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150
Principles and Methods of Assessing the Working Environment 2020, No. 1(103), pp. 159 – 169
Principles and Methods of Assessing the Working Environment 2021, No. 4 (110), pp. 179–189
UOP 539-12
UOP 779-08
VGB-M 701 e:2008 cl. 1.2
VGB-M 701 e:2008 cl. 2.1
VGB-M 701 e:2008 cl. 4
VGB-M 701 e:2008 cl. 5
VGB-M 701 e:2008 cl. 8.12
VGB-M 701 e:2008 cl. 8.8.3
VGB-M 701-e/2008 cl. 8.7
ZN/MG/CN-18:2007