🇵🇱 CENTRALNE LABORATORIUM PL
EnvironmentPetrochemistry & fuelsWater & wastewaterConstructionMaterials & polymersAutomotive
CENTRALNE LABORATORIUM is a laboratory accredited by PCA under number AB 300 (Jastrzębie Zdrój, Poland). Its accreditation scope covers 636 test methods in the following areas: Environment, Petrochemistry & fuels, Water & wastewater, Construction. Test objects include: Water, wastewater, Solid fuels: hard coal, Workplace environment - air - air samples collected on sorbent tubes, Waste gases. Most frequently used techniques: Gravimetric method, Gas chromatography with flame ionization detection (GC-FID), Spectrophotometric method.
At a glance
- Accreditation number: PCA AB 300
- Methods in scope: 636
- Types of test objects: 70
- Techniques used: 78
- City: Jastrzębie Zdrój, Poland
- Accreditation number
- AB 300
- Accreditation body
- PCA
- Address
- POMIAROWO-BADAWCZE SP. Z O.O., CENTRUM BADAŃ, ul. Rybnicka 6, 44-335 Jastrzębie Zdrój
- City
- Jastrzębie Zdrój, Poland
What this laboratory tests (70)
- Water, wastewater — 92 methods
- Solid fuels: hard coal — 77 methods
- Workplace environment - air - air samples collected on sorbent tubes — 61 methods
- Waste gases — 46 methods
- Solid fuels: coke — 33 methods
- WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. — 33 methods
- Water intended for human consumption — 26 methods
- Solid fuels: solid biomass – solid biofuel — 19 methods
- Soil — 18 methods
- Aggregate — 14 methods
- Workplace environment - air - air samples collected on filters — 14 methods
- Automated Measuring Systems (AMS) — 12 methods
- Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. — 12 methods
- Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. — 12 methods
- Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. — 11 methods
- and 55 more
Analytical techniques used (78)
- Gravimetric method — 107 methods
- Gas chromatography with flame ionization detection (GC-FID) — 66 methods
- Spectrophotometric method — 48 methods
- High-temperature combustion with IR detection — 29 methods
- Titrimetric method — 27 methods
- Direct measurement method — 20 methods
- Inductively coupled plasma optical emission spectrometry (ICP-OES) — 18 methods
- Potentiometric method — 17 methods
- Thermogravimetric method (TGA) — 15 methods
- Calorimetric method — 12 methods
- Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) — 12 methods
- Ion chromatography with conductometric detection (IC-CD) — 9 methods
- Electrothermal atomization atomic absorption spectrometry (ETAAS) — 8 methods
- Gamma-ray spectrometry method — 7 methods
- Gas chromatography with mass spectrometry detection (GC-MS) — 7 methods
- and 63 more
Laboratory sections (8)
- Environmental Testing Laboratories Team — 374 methods
- Solid Fuels Testing Laboratories Team - ZPTW — 137 methods
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Dąbrowa Górnicza Branch — 53 methods
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Zabrze Branch — 27 methods
- Inspection Body - Samplers Team — 16 methods
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Wałbrzych Branch — 13 methods
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Radlin Branch — 9 methods
- Mine Gases and Dust Testing Laboratories Team - ZPTG — 7 methods
Laboratory locations
- CENTRALNE LABORATORIUM (main site) — ul. Rybnicka 6, 44-335 Jastrzębie Zdrój
- Solid Fuels Testing Laboratories Team - ZPTW — ul. Rybnicka 6, 44-335 Jastrzębie Zdrój
- Environmental Testing Laboratories Team — ul. Rybnicka 6, 44-335 Jastrzębie Zdrój
- Mine Gases and Dust Testing Laboratories Team - ZPTG — ul. Rybnicka 6, 44-335 Jastrzębie Zdrój
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES — ul. Koksownicza 1, 42-523 Dąbrowa Górnicza
- Testing Laboratory – Dąbrowa Górnicza Branch — ul. Koksownicza 1, 42-523 Dąbrowa Górnicza
- Testing Laboratory – Wałbrzych Branch — ul. Karkonoska 9, 58-305 Wałbrzych
- Testing Laboratory – Zabrze Branch — ul. Zamkowa 9, 41-803 Zabrze
- Testing Laboratory – Radlin Branch — ul. Hutnicza 1, 44-310 Radlin
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Dąbrowa Górnicza Branch
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Radlin Branch
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Wałbrzych Branch
- TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Zabrze Branch
Certificate information
- Issue date
- 08.09.2026
- Issue no.
- 36
Accreditation scope — test methods (636)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Solid Fuels Testing Laboratories Team - ZPTW | |||||
| 1 | Solid fuels: hard coal | Total moisture content Range (0,5 – 50,0) % Gravimetric method |
PN-80/G-04511 | PN-ISO 589:2006 Method A1 | PN-G-04611:2020-06 | ||
| 2 | Solid fuels: hard coal | Free moisture content Range (0,5– 30,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 3 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,1 – 12,0) % |
Gravimetric method | PN-80/G-04511 | PN-ISO 11722:2009 | PN-G-04611:2020-06 | |
| 4 | Solid fuels: hard coal | Moisture content in air-dried coal Range (0,5 – 12,0) % |
Gravimetric method | PN-80/G-04511 | |
| 5 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,50 – 12,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 6 | Solid fuels: hard coal | Ash content Range (0,50 – 40,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 7 | Solid fuels: hard coal | Volatile matter content Range (15,00 – 40,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 8 | Solid fuels: hard coal | Ash content Range (0,5 – 40,0) % |
Gravimetric method | PN-80/G-04512 | PN-80/G-04512/Az1:2002 | |
| 9 | Solid fuels: hard coal | Ash content Range (0,5 – 80,0) % |
Gravimetric method | PN-ISO 1171:2002 | |
| 10 | Solid fuels: hard coal | Total sulfur content Range (0,05 – 5,00) % |
High-temperature combustion with IR detection | PN-G-04584:2001 | ISO 19579:2006 | |
| 11 | Solid fuels: hard coal | Total sulfur content Range (0,05 – 5,00) % |
Gravimetric method | PN-ISO 334:1997 | |
| 12 | Solid fuels: hard coal | Volatile matter content Range (4,00 – 40,00) % |
Gravimetric method | PN-G-04516:1998 | |
| 13 | Solid fuels: hard coal | Volatile matter content Range (15,0 – 40,0) % |
Gravimetric method | ISO 562:2024 | |
| 14 | Solid fuels: hard coal | Caking ability Range 0 – 90 |
Roga method | PN-81/G-04518 | PN-G-04508:2020-05 | |
| 15 | Solid fuels: hard coal | Caking index Range 0 – 90 |
Gravimetric method | PN-ISO 15585:2009 | |
| 16 | Solid fuels: hard coal | Free swelling index Range 0 – 9,0 |
Visual method | PN-ISO 501:2007 | |
| 17 | Solid fuels: hard coal | True density Range (1,200 – 2,500) g/cm3 |
Gas pycnometer method | PB-138 issue 2 of 24.02.2020 | |
| 18 | Solid fuels: hard coal | Transportability index by the GIG method Range (100 – 10 000) Pa |
Strain gauge method | PN-82/G-04544 | |
| 19 | Solid fuels: hard coal | Random vitrinite reflectance Range (0,4 – 4,0) % |
Microscopic method | PN-ISO 7404-5:2002 | |
| 20 | Solid fuels: hard coal | Content of maceral groups and mineral matter Range (0 – 100) % |
Microscopic method | PN-ISO 7404-3:2001 | |
| 21 | Solid fuels: hard coal | Grindability index Range 40 – 110 |
Hardgrove method | PN-ISO 5074:2002 | |
| 22 | Solid fuels: hard coal | Plastometric properties Fmax (1 – 30000) ddpm temperature (330 – 550) °C |
Giesler method | PN-G-04565:1994 | |
| 23 | Solid fuels: hard coal | Spontaneous combustion index of coal Sza’ (3 – 50) °C/min Sza (20 – 170) °C/min |
Olpiński method | PN-93/G-04558 | |
| 24 | Solid fuels: hard coal | Sulphate (VI) sulphur content Range (0,01 – 0,10) % |
Gravimetric method | PN-G-04582:1997 cl. 2.1 | |
| 25 | Solid fuels: hard coal | Pyritic sulfur content Range (0,03 – 1,90) % |
Titrimetric method | PN-G-04582:1997 cl. 2.2.2 | |
| 26 | Solid fuels: hard coal | Chlorine content Range (0,02 – 1,00) % |
Titrimetric method | PN ISO-587:2000 cl. 7.2.1 | |
| 27 | Solid fuels: hard coal | Chlorine content Range (0,02 – 0,60) % |
Energy-dispersive X-ray fluorescence spectrometry | PB-03 issue 6 of 20.12.2022 | |
| 28 | Solid fuels: hard coal | Phosphorus content Range (0,003 – 0,250) % |
Energy-dispersive X-ray fluorescence spectrometry | PB-48 issue 6 of 15.12.2025 | |
| 29 | Solid fuels: hard coal | Phosphorus content Range (0,001 – 1,000) % |
Spectrophotometric method | ISO 622:2025-06 | |
| 30 | Solid fuels: hard coal | Mercury content Range (0,001 – 1,000) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 31 | Solid fuels: hard coal | Fluorine content Range (0,005 – 0,050) % |
Potentiometric method | PN-82/G-04543 | |
| 32 | Solid fuels: hard coal | Oxidation coefficient (calculated) | PB-42 issue 6 of 27.12.2023 | ||
| 33 | Solid fuels: hard coal | True density Range (1,200 – 2,500) g/cm3 |
Pycnometric method | PN-G-04537:1998 | |
| 34 | Solid fuels: hard coal | Grain composition Fraction (0,2 – 31,5) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-C-06304:2001 | |
| 35 | Solid fuels: hard coal | Ash sulfur content Range (0,01 – 1,00) % |
High-temperature combustion with IR detection | PN-G-04584:2001 | |
| 36 | Solid fuels: hard coal | Phosphorus pentoxide (P2O5) content Range (0,060 – 7,000) % |
Spectrophotometric method | ISO 622:2025-06 | |
| 37 | Solid fuels: hard coal | Characteristic ash fusion temperatures Range (800 – 1550) °C |
High-temperature microscopy method | PN-ISO 540:2001 | PN-82/G-04535 | |
| 38 | Solid fuels: hard coal | Gross calorific value Range (3000 – 35000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-ISO 1928:2020-05 | |
| 39 | Solid fuels: hard coal | Gross calorific value Range (10000 – 35000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-81/G-04513 | |
| 40 | Solid fuels: hard coal | Carbon content Range (40,0 – 98,0) % |
High-temperature combustion with IR detection | PN-G-04571:1998 | ISO 29541:2025 | |
| 41 | Solid fuels: hard coal | Carbon content Range (10,0 – 98,0) % |
High-temperature combustion with IR detection | PKN ISO/TS 12902:2007 | |
| 42 | Solid fuels: hard coal | Dilatometric indices Contraction a (0 – 40) % Dilatation b (-50 – 300) % Temperature (300 – 550) oC |
Audibert-Arnu method | PN-81/G-04517 | |
| 43 | Solid fuels: hard coal | Dilatometric indices Contraction a (20 – 32) % Dilatation b (-15 – 200) % Temperature (375 – 475) oC |
Audibert-Arnu method | ISO 349:2020 | |
| 44 | Solid fuels: hard coal | Fixed carbon index (calculated) | PN-G-04516:1998 | ||
| 45 | Solid fuels: coke | Total moisture content Range (0,5 – 15,0) % |
Gravimetric method | PN-ISO 579:2002 | |
| 46 | Solid fuels: coke | Moisture content in the analytical sample Range (0,1 – 3,0) % |
Gravimetric method | PN-ISO 687:2005 | |
| 47 | Solid fuels: coke | Ash content Range (0,3 – 15,0) % |
Gravimetric method | PN-ISO 1171:2002 | |
| 48 | Solid fuels: coke | Volatile matter content Range (0,4 – 5,0) % |
Gravimetric method | ISO 562:2024 | |
| 49 | Solid fuels: coke | Total sulfur content Range (0,10 – 1,50) % |
High-temperature combustion with IR detection | ISO 19579:2006 | PN-G-04584:2001 | |
| 50 | Solid fuels: coke | Gross calorific value Range (25000 – 35000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-ISO 1928:2020-05 | |
| 51 | Solid fuels: coke | Coke reactivity index (CRI) and coke strength after reaction (CSR) CRI (15,0 – 80,0) % CSR (0,0 – 80,0) % |
Gravimetric method | ISO 18894:2018 | |
| 52 | Solid fuels: coke | Mercury content Range (0,001 – 0,500) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 53 | Solid fuels: coke | Carbon content Range (40,0 – 98,0) % |
High-temperature combustion with IR detection | PN-G-04571:1998 | ISO 29541:2025 PKN ISO/TS 12902:2007 | |
| 54 | Solid fuels: hard coal, coke | Hydrogen content Range (0,10 – 6,00) % |
High-temperature combustion with IR detection | PN-G-04571:1998 | ISO 29541:2025 PKN ISO/TS 12902:2007 | |
| 55 | Solid fuels: hard coal, coke | Total carbon content Range (40,0 – 90,0) % |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 56 | Solid fuels: hard coal, coke | Nitrogen content Range (0,10 – 2,00) % |
High-temperature combustion with TC detection | PN-G-04571:1998 PKN ISO/TS 12902:2007 | |
| 57 | Solid fuels: hard coal, coke | Carbon dioxide emission factor (calculated) | PB-06 issue 8 of 08.02.2023 | ||
| 58 | Aggregate | Total moisture content Range (0,5 – 50,0) % |
Gravimetric method | PB-24 cl. 5.4 issue 7 of 07.01.2019 | |
| 59 | Aggregate | Free moisture content Range (0,5 – 40,0) % |
Gravimetric method | PB-24 cl. 5.2 issue 7 of 07.01.2019 | |
| 60 | Aggregate | Moisture content in the analytical sample Range (0,1 – 10,0) % |
Gravimetric method | PB-24 cl. 5.5 issue 7 of 07.01.2019 | |
| 61 | Aggregate | Moisture content in the air-dried sample Range (0,1 – 10,0) % |
Gravimetric method | PB-24 cl. 5.3 issue 7 of 07.01.2019 | |
| 62 | Aggregate | Moisture content in the analytical sample Range (0,10 – 10,00) % |
Thermogravimetric method (TGA) | PB-24 cl. 5.6 issue 7 of 07.01.2019 | |
| 63 | Aggregate | Ash content Range (30,00 – 90,00) % |
Thermogravimetric method (TGA) | PB-25 issue 8 of 27.12.2023 | |
| 64 | Aggregate | Ash content Range (30,0 – 90,0) % |
Gravimetric method | PB-25 issue 8 of 27.12.2023 | |
| 65 | Aggregate | Combustible matter content Range (1,00 – 50,00) % |
Gravimetric method | PN-93/Z-15008/03 | |
| 66 | Aggregate | Content of non-combustible parts (calculated) | PN-93/Z-15008/03 | ||
| 67 | Aggregate | Loss on ignition Range (3,00 – 70,00) % |
Gravimetric method | PN-88/B-04481 | PN-77/G-04528/02 | |
| 68 | Aggregate | Total sulfur content Range (0,03 – 3,00) % |
High-temperature combustion with IR detection | PB-26 issue 8 of 27.12.2023 | |
| 69 | Aggregate | Gross calorific value Range (300 – 15 000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PB-49 issue 5 of 07.01.2020 | |
| 70 | Aggregate | Total carbon content Range (0,5 – 20,0) % |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 71 | Aggregate | Mercury content Range (0,001 – 3,000) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 72 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total moisture content Range (1,0 – 50,0) % |
Gravimetric method | PB-24 cl. 5.1 issue 7 of 07.01.2019 | |
| 73 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total moisture content Range (1,0 – 50,0) % |
Gravimetric method | PB-24 cl. 5.4 issue 7 of 07.01.2019 | |
| 74 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Free moisture content Range (0,5 – 40,0) % |
Gravimetric method | PB-24 cl. 5.2 issue 7 of 07.01.2019 | |
| 75 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Moisture content in the analytical sample Range (0,4 – 10,0) % |
Gravimetric method | PB-24 cl. 5.5 issue 7 of 07.01.2019 | |
| 76 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Moisture content in the air-dried sample Range (0,4 – 10,0) % |
Gravimetric method | PB-24 cl. 5.3 issue 7 of 07.01.2019 | |
| 77 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Moisture content in the analytical sample Range (0,40 – 10,00) % |
Thermogravimetric method (TGA) | PB-24 cl. 5.6 issue 7 of 07.01.2019 | |
| 78 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Ash content Range (5,00 – 90,00) % |
Thermogravimetric method (TGA) | PB-25 issue 8 of 27.12.2023 | |
| 79 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Ash content Range (5,0 – 90,0) % |
Gravimetric method | PB-25 issue 8 of 27.12.2023 | |
| 80 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Combustible matter content Range (1,00 – 50,00) % Content of non-combustible parts (calculated) |
Gravimetric method | PN-93/Z-15008/03 | |
| 81 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Loss on ignition Range (0,50 – 70,00) % |
Gravimetric method | PN-88/B-04481 | PN-77/G-04528/02 | PN-EN 15935:2022-01 | |
| 82 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 107 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total sulfur content Range (0,03 – 2,00) % |
High-temperature combustion with IR detection | PB-26 issue 8 of 27.12.2023 | |
| 83 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 107 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Gross calorific value Range (800 – 35 000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PB-49 issue 5 of 07.01.2020 | |
| 84 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 107 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total carbon content Range (0,5 – 80,0) % |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 85 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 107 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Mercury content Range (0,001 – 3,000) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 86 | Waste code: 03 01 99, 10 01 99, 15 02 03, 16 01 03, 16 01 99, 16 08 02*, 19 08 05, 19 08 14, 19 12 107 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Chlorine content Range (0,02 – 5,00) % |
Titrimetric method | PB-37 issue 6 of 20.12.2022 | |
| 87 | Waste code: 01 01 02, 01 04 12, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 10 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Grain composition Fraction (2,0 – 10,0) mm Range (0,0 – 100,0) % |
Gravimetric method | PB-33 issue 3 of 27.12.2023 | |
| 88 | Solid fuels: solid biomass – solid biofuel | Total moisture content Range (2,0 – 50,0) % |
Gravimetric method | PN-EN ISO 18134-1:2023-02 | |
| 89 | Solid fuels: solid biomass – solid biofuel | Total moisture content Range (5,0 – 50,0) % |
Gravimetric method | PN-EN ISO 18134-2:2024-10 | |
| 90 | Solid fuels: solid biomass – solid biofuel | Moisture content in the analytical sample Range (1,0 – 10,0) % |
Gravimetric method | PN-EN ISO 18134-3:2023-12 | |
| 91 | Solid fuels: solid biomass – solid biofuel | Ash content Range (0,5 – 15,0) % |
Gravimetric method | PN-EN ISO 18122:2023-05 | |
| 92 | Solid fuels: solid biomass – solid biofuel | Volatile matter content Range (60,0 – 85,0) % |
Gravimetric method | PN-EN ISO 18123:2023-10 | |
| 93 | Solid fuels: solid biomass – solid biofuel | Total sulfur content Range (0,03 – 0,40) % |
High-temperature combustion with IR detection | PN-EN ISO 16994:2016-10 | |
| 94 | Solid fuels: solid biomass – solid biofuel | Gross calorific value Range (12000 – 23000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-EN ISO 18125:2017-07 | |
| 95 | Solid fuels: solid biomass – solid biofuel | Chlorine content Range (0,020 – 0,300) % |
Titrimetric method | PN-EN ISO 16994:2016-10 | |
| 96 | Solid fuels: solid biomass – solid biofuel | Fluorine content Range (0,0015 – 0,0500) % |
Potentiometric method | PB-126 issue 4 of 07.01.2020 | |
| 97 | Solid fuels: solid biomass – solid biofuel | Total carbon content Range (30,0 – 50,0) % |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 98 | Solid fuels: solid biomass – solid biofuel | Carbon, hydrogen content Carbon (40,0 – 55,0) % Hydrogen (4,00 – 8,00) % |
High-temperature combustion with IR detection | PN-EN ISO 16948:2015-07 | |
| 99 | Solid fuels: solid biomass – solid biofuel | Nitrogen content Range (0,10 – 2,00) % |
High-temperature combustion with TC detection | PN-EN ISO 16948:2015-07 | |
| 100 | Solid fuels: solid biomass – solid biofuel | Length and diameter of pellets Range (3,0 – 50,0) mm |
Linear measurement method | PN-EN ISO 17829:2016-02 | |
| 101 | Solid fuels: solid biomass – solid biofuel | Mechanical durability of pellets Range (90,0 – 99,0) % |
Gravimetric method | PN-EN ISO 17831-1:2025-10 | |
| 102 | Solid fuels: solid biomass – solid biofuel | Undersize content Range (0,2 – 4,0) % |
Gravimetric method | PN-EN ISO 18846:2016-11 | |
| 103 | Solid fuels: solid biomass – solid biofuel | Bulk density Range (550 – 700) kg/m3 |
Gravimetric method | PN-EN ISO 17828:2025-09 | |
| 104 | Solid fuels: solid biomass – solid biofuel | Characteristic ash fusion temperatures Range (550 – 1550) °C |
High-temperature microscopy method | NPR-CEN/TS 15370-1:2006 | |
| 105 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total moisture content Range (5,0 – 50,0) % |
Gravimetric method | CEN/TS 15414-1:2010 | |
| 106 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Moisture content in the analytical sample Range (1,0 – 15,0) % |
Gravimetric method | PN-EN ISO 21660-3:2021-08 | |
| 107 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Ash content Range (0,1 – 80,0) % |
Gravimetric method | PN-EN ISO 21656:2021-08 excluding cl. 7.3 | |
| 108 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total sulfur content Range (0,03 – 6,00) % |
High-temperature combustion with IR detection | PN-EN 15408:2011 | |
| 109 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Volatile matter content Range (50,0 – 70,0) % |
Gravimetric method | PN-EN ISO 22167:2021-08 | |
| 110 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total carbon content Range (30,0 – 50,0) % |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 111 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Chlorine content Range (0,02 – 0,30) % |
Titrimetric method | PB-37 issue 6 of 20.12.2022 | |
| 112 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Fluorine content Range (0,0015 – 0,0500) % |
Potentiometric method | PN-EN 15408:2011 | |
| 113 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Carbon, hydrogen content Carbon (20,0 – 80,0) % Hydrogen (0,20 – 10,0) % |
High-temperature combustion with IR detection | PN-EN ISO 21663:2021-06 | |
| 114 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Nitrogen content Range (0,10 – 6,00) % |
High-temperature combustion with TC detection | PN-EN ISO 21663:2021-06 | |
| 115 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Biodegradable fraction content mass fraction of biomass using selective dissolution Range (10,0 – 70,0) % Content of the non-biodegradable fraction mass fraction of non-biomass (calculated) |
Gravimetric method | PN-EN ISO 21644:2021-07 according to Annex B | |
| 116 | Solid fuels: solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Gross calorific value Range (2000 – 30000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-EN ISO 21654:2021-12 | |
| 117 | Solid fuels: solid biomass – solid biofuel, solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Gross calorific value Range (2000 – 30000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PB-36 issue 6 of 07.01.2020 | |
| 118 | Solid fuels: solid biomass – solid biofuel, solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Characteristic ash fusion temperatures Range (700 – 1550) °C |
High-temperature microscopy method | PB-39 issue 6 of 06.11.2023 | |
| 119 | Solid fuels: solid biomass – solid biofuel, solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 04, 02 01 07, 03 01 01, 03 01 05, 03 01 80*, 03 01 99, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 16 01 03, 16 01 99, 16 08 02*, 17 02 01, 17 02 03, 19 08 05, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Mercury content Range (0,001 – 1,000) mg/kg |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 120 | Soil | Grain composition Fraction (2,0 – 63,0) mm Range (0 – 100) % |
Gravimetric method | PN-EN ISO 17892-4:2017-01 | |
| 121 | Soil | Dry matter (dry residue) Range (30,0 – 99,9) % Water content (calculated) |
Gravimetric method | PN-ISO 11464:1999 | PN-ISO 11465:1999 | |
| 122 | Ground, soil | Water permeability – coefficient of permeability Range (1,0·10-9 – 1,0·10-3) m/s |
Hydraulic gradient method | PKN-CEN ISO/TS 17892-11:2009 | |
| 123 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total moisture content Range (1,0 – 50,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-24 cl. 5.1 issue 7 of 07.01.2019 | |
| 124 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total moisture content Range (1,0 – 50,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-24 cl. 5.4 issue 7 of 07.01.2019 | |
| 125 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Free moisture content Range (0,5 – 40,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-24 cl. 5.2 issue 7 of 07.01.2019 | |
| 126 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Moisture content in the analytical sample Range (0,4 – 10,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-24 cl. 5.5 issue 7 of 07.01.2019 | |
| 127 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Moisture content in the air-dried sample Range (0,4 – 10,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-24 cl. 5.3 issue 7 of 07.01.2019 | |
| 128 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Moisture content in the analytical sample Range (0,40 – 10,00) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Thermogravimetric method (TGA) | PB-24 cl. 5.6 issue 7 of 07.01.2019 | |
| 129 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Ash content Range (5,00 – 90,00) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Thermogravimetric method (TGA) | PB-25 issue 8 of 27.12.2023 | |
| 130 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Ash content Range (5,0 – 90,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PB-25 issue 8 of 27.12.2023 | |
| 131 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Combustible matter content Range (1,00 – 50,00) % Content of non-combustible parts (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PN-93/Z-15008/03 | |
| 132 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Loss on ignition Range (0,50 – 70,00) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PN-88/B-04481 | PN-77/G-04528/02 | PN-EN 15935:2022-01 | |
| 133 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total sulfur content Range (0,03 – 2,00) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
High-temperature combustion with IR detection | PB-26 issue 8 of 27.12.2023 | |
| 134 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Gross calorific value Range (800 – 35 000) kJ/kg Net calorific value (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Calorimetric method | PB-49 issue 5 of 07.01.2020 | |
| 135 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total carbon content Range (0,5 – 80,0) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
High-temperature combustion with IR detection | PB-05 issue 9 of 07.01.2020 | |
| 136 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Mercury content Range (0,001 – 3,000) mg/kg Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Atomic absorption spectrometry with amalgamation technique | PB-04 issue 8 of 20.12.2024 | |
| 137 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Chlorine content Range (0,02 – 5,00) % Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Titrimetric method | PB-37 issue 6 of 20.12.2022 | |
| Environmental Testing Laboratories Team | |||||
| 138 | Water intended for human consumption | Ammonium ion concentration Range (0,10 – 2,00) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Spectrophotometric method | PN-C-04576-4:1994 | |
| 139 | Water intended for human consumption | Nitrite concentration Range (0,033 – 2,00) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Spectrophotometric method | PN-EN 26777:1999 | |
| 140 | Water intended for human consumption | Nitrate concentration Range (0,088 – 100) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Spectrophotometric method | PN-82/C-04576/08 | |
| 141 | Water intended for human consumption | Colour Range (2,0 – 20) mg/l Pt Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Spectrophotometric method | PN-EN ISO 7887:2012 Method C | PN-EN ISO 7887:2012/Ap1:2015-06 | |
| 142 | Water intended for human consumption | Turbidity Range (0,20 – 10) NTU Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Nephelometric method | PN-EN ISO 7027-1:2016-09 | |
| 143 | Water intended for human consumption | Total organic carbon concentration (TOC) Range (1,50 – 20) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
High-temperature combustion with IR detection | PN-EN 1484:1999 | |
| 144 | Water intended for human consumption | Permanganate index (oxidisability) Range (1,0 – 10,0) mg/l O2 Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 145 | Water intended for human consumption | Chloride concentration Range (3,00 – 500) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Titrimetric method | PN-ISO 9297:1994 | |
| 146 | Water intended for human consumption | Total content of calcium and magnesium (total hardness) Range (10,0 – 1000) mg/l CaCO3 Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Titrimetric method | PN-ISO 6059:1999 | |
| 147 | Water intended for human consumption | Element concentration copper (0,010 – 4,0) mg/l nickel (5,0 – 50) μg/l chromium (10 – 100) μg/l sodium (4,0 – 500) mg/l iron (20,0 – 500) μg/l manganese (6,0 – 100) μg/l calcium (0,50 – 200) mg/l magnesium (0,50 – 200) mg/l aluminium (20,0 – 500) μg/l boron (0,05 – 10) mg/l silver (0,0010 – 0,10) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 148 | Water intended for human consumption | Element concentration antimony (1,00 – 30,0) μg/l arsenic (1,00 – 20,0) μg/l cadmium (0,50 – 20,0) μg/l lead (0,50 – 20,0) μg/l selenium (1,00 – 20,0) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-EN ISO 15586:2005 | |
| 149 | Water intended for human consumption | Mercury concentration Range (0,10 – 2,0) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 | PN-EN ISO 12846:2012/Ap1:2016-07 | |
| 150 | Water intended for human consumption | Anion concentrations nitrates (0,10 – 100) mg/l nitrites (0,10 – 5,0) mg/l chlorides (1,00 – 500) mg/l fluorides (0,10 – 5,0) mg/l sulfates (1,00 – 500) mg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 151 | Water intended for human consumption | Benzene concentration Range (0,10 – 10,0) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-ISO 11423-1:2002 | |
| 152 | Water intended for human consumption | Concentration of polycyclic aromatic hydrocarbons (PAH), Range, Benzo(a)pyrene (0,0030 – 0,500) μg/l, Benzo(b)fluoranthene (0,0040 – 0,50) μg/l, Benzo(k)fluoranthene (0,0040 – 0,50) μg/l, Benzo(ghi)perylene (0,0040 – 0,50) μg/l, Indeno(1,2,3-cd)pyrene (0,0040 – 0,50) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-EN ISO 17993:2005 | |
| 153 | Water intended for human consumption | Sum of PAH concentrations (calculated) Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
PN-EN ISO 17993:2005 | ||
| 154 | Water intended for human consumption | Concentration of magnesium, total content of calcium and magnesium (total hardness) (calculated) Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
IN-39 issue 7 of 01.07.2026 cl. 5.8 and 5.9 | ||
| 155 | Water intended for human consumption | 1,2-dichloroethane, trichloroethene and tetrachloroethene concentration Range 1,2-dichloroethane (0,50 – 5,0) μg/l Trichloroethene (0,20 – 20,0) μg/l Tetrachloroethene (0,20 – 20,0) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Gas chromatography with headspace analysis and mass spectrometry detection (HS-GC-MS) | PN-EN ISO 10301:2002 | |
| 156 | Water intended for human consumption | Sum of trichloroethene and tetrachloroethene concentrations (calculated) Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
PN-EN ISO 10301:2002 | ||
| 157 | Water intended for human consumption | Trihalomethane concentration Trichloromethane (chloroform) Range (0,20 – 200) μg/l Bromodichloromethane (0,50 – 200) μg/l Dibromochloromethane (0,50 – 200) μg/l Tribromomethane (bromoform) (0,50 – 200) μg/l Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Gas chromatography with headspace analysis and mass spectrometry detection (HS-GC-MS) | PN-EN ISO 10301:2002 | |
| 158 | Water intended for human consumption | Sum of trihalomethane concentrations (calculated) Regulated area: Testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
PN-EN ISO 10301:2002 | ||
| 159 | Water | Ammonium nitrogen concentration Range (0,08 – 1000) mg/l |
Spectrophotometric method | PN-C-04576-4:1994 | |
| 160 | Water | Total concentration of calcium and magnesium (total hardness) Range (0,10 – 1000) mmol/l Range (10,0 – 100000) mg/l CaCO3 |
Titrimetric method | PN-ISO 6059:1999 | |
| 161 | Water | Element concentration antimony (1,00 – 30,0) μg/l arsenic (1,00 – 20,0) μg/l cadmium (0,50 – 20,0) μg/l lead (0,50 – 20,0) μg/l selenium (1,00 – 20,0) μg/l |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-EN ISO 15586:2005 | |
| 162 | Water | Concentration of organophosphorus compounds: azinphos-ethyl azinphos-methyl chlorfenvinphos diazinon dichlorvos fenitrothion malathion fenthion methyl parathion ethyl parathion propetamphos Range (0,025 – 10,0) μg/l |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-EN 12918:2004 | |
| 163 | Wastewater | Concentration of organophosphorus compounds: azinphos-ethyl azinphos-methyl chlorfenvinphos diazinon dichlorvos fenitrothion malathion fenthion methyl parathion ethyl parathion propetamphos Range (0,100 – 10,0) μg/l |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-EN 12918:2004 | |
| 164 | Rainwater, snowmelt water | Total suspended solids (TSS) Range (3,5 – 1000) mg/l |
Gravimetric method | PN-EN 872:2007 | PN-EN 872:2007/Ap1:2007 | |
| 165 | Rainwater, snowmelt water | Mineral oil index Range (0,10 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 166 | Water, wastewater | Total suspended solids (TSS) Range (3,5 – 100000) mg/l |
Gravimetric method | PN-EN 872:2007 | PN-EN 872:2007/Ap1:2007 | |
| 167 | Water, wastewater | Mineral suspended solids Range (2,0 – 100000) mg/l Volatile suspended solids (calculated) |
Gravimetric method | PB-102 issue 3 of 14.01.2019 | |
| 168 | Water, wastewater | Settleable solids Range (0,20 – 100) ml/l |
Volumetric method | PN-72/C-04559/03 | |
| 169 | Water, wastewater | Chloride concentration Range (3,00 – 300000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 170 | Water, wastewater | Sulfate concentration Range (10 – 10000) mg/l |
Spectrophotometric method | PB-07 issue 7 of 29.12.2023 | based on HACH test No. 8051 | |
| 171 | Water, wastewater | Sulfate concentration Range (10 – 10000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 172 | Water, wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 173 | Water, wastewater | Nitrite nitrogen concentration Range (0,010 – 1000) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 174 | Water, wastewater | Nitrate nitrogen concentration Range (0,020 – 1000) mg/l |
Spectrophotometric method | PN-82/C-04576/08 | |
| 175 | Water, wastewater | Ammonium nitrogen concentration Range (0,05 – 1000) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 176 | Water, wastewater | Ammonium nitrogen concentration Range (1,00 – 1000) mg/l |
Potentiometric titration method | PN-ISO 5664:2002 | |
| 177 | Water, wastewater | Kjeldahl nitrogen concentration Range (3,0 – 1000) mg/l |
Potentiometric titration method | PN-EN 25663:2001 | |
| 178 | Water, wastewater | Total nitrogen concentration (calculated) | PN-73/C-04576/14 | ||
| 179 | Water, wastewater | Calcium concentration Range (0,050 – 500) mmol/l Range (2,0 – 20000) mg/l |
Titrimetric method | PN-ISO 6058:1999 | |
| 180 | Water, wastewater | Magnesium concentration, total hardness, calcium hardness, magnesium hardness, carbonate hardness, non-carbonate hardness (calculated) | IN-39 issue 7 of 01.07.2026 | ||
| 181 | Water, wastewater | Concentration of carbonates, bicarbonates, hydroxides (calculated) | IN-38 issue 7 of 29.12.2023 | ||
| 182 | Water, wastewater | Total alkalinity and mineral alkalinity Range (0,40 – 50) mmol/l Range (20,0 – 2500) mg/l CaCO3 |
Titrimetric method | PN-EN ISO 9963-1:2001 cl. 8.2 | PN-EN ISO 9963-1:2001/Ap1:2004 | |
| 183 | Water, wastewater | Mercury concentration Range (0,00010 – 0,5) mg/l |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 | PN-EN ISO 12846:2012/Ap1:2016-07 | |
| 184 | Water, wastewater | Colour Range (2,0 – 100) mg/l Pt |
Spectrophotometric method | PN-EN ISO 7887:2012 Method C | PN-EN ISO 7887:2012/Ap1:2015-06 | |
| 185 | Water, wastewater | Turbidity Range (0,20 – 400) NTU |
Nephelometric method | PN-EN ISO 7027-1:2016-09 | |
| 186 | Water, wastewater | Biochemical oxygen demand BOD5, BOD2+5 Range (3,0 – 6000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 187 | Water, wastewater | Biochemical oxygen demand BOD5, BOD2+5 Range (2,0 – 6,0) mg/l O2 |
Electrochemical method | PN-EN 1899-2:2002 | |
| 188 | Water, wastewater | Dissolved oxygen concentration Range (0,20 – 20) mg/l |
Electrochemical method | PN-EN ISO 5814:2013-04 | |
| 189 | Water, wastewater | Dissolved solids Range (10 – 500000) mg/l |
Gravimetric method | PB-28 issue 5 of 09.01.2019 | |
| 190 | Water, wastewater | Total dry residue Range (10 – 500000) mg/l |
Gravimetric method | PB-28 issue 5 of 09.01.2019 | |
| 191 | Water, wastewater | Mineral dissolved solids (residue on ignition) Range (10 – 500000) mg/l |
Gravimetric method | PB-28 issue 5 of 09.01.2019 | |
| 192 | Water, wastewater | Volatile dissolved solids (loss on ignition) Range (10 – 500000) mg/l Range (1,0 – 100) % |
Gravimetric method | PB-28 issue 5 of 09.01.2019 | |
| 193 | Water, wastewater | Organic substances extractable with petroleum ether Range (0,8 – 1000) mg/l |
Gravimetric method | PB-29 issue 7 of 09.02.2023 | |
| 194 | Water, wastewater | Free chlorine concentration Range (0,02 – 10,0) mg/l Total chlorine concentration Range (0,02 – 10,0) mg/l Combined chlorine (calculated) |
Spectrophotometric method | PN-EN ISO 7393-2:2018-04 | |
| 195 | Water, wastewater | Chemical oxygen demand - COD-Cr Range (15 – 25000) mg/l O2 |
Spectrophotometric method | PN-ISO 15705:2005 | |
| 196 | Water, wastewater | Permanganate index Range (1,0 – 1000) mg/l O2 |
Titrimetric method | PN-EN ISO 8467:2001 | |
| 197 | Water, wastewater | Electrical conductivity Range 15 μS/cm – 500 mS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 198 | Water, wastewater | Sulphide and hydrogen sulphide concentration Range (0,010 – 100) mg/l |
Spectrophotometric method | PB-103 issue 6 of 20.02.2026 | based on HACH test No. 8131 | |
| 199 | Water, wastewater | Phenol index (volatile phenols) Range (0,002 – 10,0) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Method B | |
| 200 | Water, wastewater | Total phosphorus concentration Range (0,007 – 1000) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 8 | PN-EN ISO 6878:2006/Ap1:2010 | PN-EN ISO 6878:2006/Ap2:2010 | |
| 201 | Water, wastewater | Phosphate concentration Range (0,007 – 1000) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 | PN-EN ISO 6878:2006/Ap1:2010 | PN-EN ISO 6878:2006/Ap2:2010 | |
| 202 | Water, wastewater | Free carbon dioxide concentration Range (2,2 – 1000) mg/l |
Titrimetric method | PN-74/C-04547/01 cl. 2.1 | |
| 203 | Water, wastewater | Aggressive carbon dioxide concentration (calculated) | PN-74/C-04547/03 | ||
| 204 | Water, wastewater | Fluoride concentration Range (0,10 – 1000) mg/l |
Potentiometric method | PN-78/C-04588/03 | |
| 205 | Water, wastewater | Bromide concentration Range (0,30 – 1000) mg/l |
Spectrophotometric method | PB-50 issue 4 of 14.01.2019 | |
| 206 | Water, wastewater | Iodide concentration Range (0,008 – 1000) mg/l |
Spectrophotometric method | PB-51 issue 4 of 14.01.2019 | |
| 207 | Water, wastewater | Iodide concentration Range (0,30 – 1000) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-3:2001 | |
| 208 | Water, wastewater | Chromium(VI) concentration Range (0,010 – 1000) mg/l Chromium (III) concentration (calculated) |
Spectrophotometric method | PN-77/C-04604/08 | |
| 209 | Water, wastewater | Anion concentrations nitrates (0,10 – 5000) mg/l nitrites (0,10 – 1000) mg/l bromides (0,30 – 1000) mg/l chlorides (1,00 – 100000) mg/l phosphates (0,20 – 1000) mg/l fluorides (0,10 –1000) mg/l sulfates (1,00 – 10000) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | |
| 210 | Water, wastewater | Concentration of total organic carbon (TOC), dissolved organic carbon (DOC) Range (1,50 – 2000) mg/l |
High-temperature combustion with IR detection | PN-EN 1484:1999 | PN-EN ISO 20236:2025-05 | |
| 211 | Water, wastewater | Total carbon concentration (TC) Range (3,00 – 4000) mg/l Total inorganic carbon (TIC) concentration Range (1,50 – 2000) mg/l Total organic carbon (TOC) concentration (calculated) |
High-temperature combustion with IR detection; Infrared spectrometry (IR) | PN-EN 1484:1999 | PN-EN ISO 20236:2025-05 | |
| 212 | Water, wastewater | Sulfite concentration Range (0,10 – 1000) mg/l |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-3:2001 | |
| 213 | Water, wastewater | Thiocyanate concentration Range (0,10 – 1000) mg/l |
Chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-3:2001 | |
| 214 | Water, wastewater | Total nitrogen concentration Range (0,50 – 3000) mg/l |
High-temperature combustion with chemiluminescence detection | PN-EN ISO 20236:2025-05 | |
| 215 | Water, wastewater | Element concentration zinc (0,040 – 10000) mg/l copper (0,010 – 1000) mg/l nickel (0,005 – 1000) mg/l lead (0,010 – 1000) mg/l cadmium (0,002 –1000 mg/l total chromium (0,010 – 1000) mg/l sodium (4,0 – 100000) mg/l potassium (0,90 – 5000) mg/l barium (0,10 – 5000) mg/l iron (0,020 – 20000) mg/l manganese (0,0060 – 1000) mg/l calcium (0,50 – 20000) mg/l magnesium (0,50 – 10000) mg/l aluminium (0,020 – 1000) mg/l strontium (0,020 – 1000) mg/l cobalt (0,006 – 1000) mg/l silicon (0,10 – 1000) mg/l arsenic (0,0020 – 1000) mg/l tin (0,006 – 1000) mg/l antimony (0,005 – 1000) mg/l boron (0,05 – 1000) mg/l total phosphorus (0,008 – 1000) mg/l selenium (0,009 – 1000) mg/l molybdenum (0,0010 – 1000) mg/l titanium (0,008 – 1000) mg/l vanadium (0,004 – 1000) mg/l silver (0,0010 – 1000) mg/l beryllium (0,004 – 1000) mg/l thallium (0,07 – 1000) mg/l lithium (0,004 – 1000) mg/l |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | |
| 216 | Water, wastewater | Element concentration arsenic (0,0020 – 1000) mg/l antimony (0,005 – 1000) mg/l tin (0,006 – 1000) mg/l selenium (0,009 – 1000) mg/l |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 11885:2009 | |
| 217 | Water, wastewater | Concentration of polycyclic aromatic hydrocarbons (PAH) Naphthalene Acenaphthene Fluorene Anthracene Phenanthrene Fluoranthene Pyrene Benzo(a)anthracene Chrysene Benzo(a)fluoranthene Benzo(b)fluoranthene Benzo(k)fluoranthene Benzo(a)pyrene Benzo(e)pyrene Benzo(ghi)perylene Indeno(1,2,3-cd)pyrene Dibenzo(a,h)anthracene Range (0,0040 – 2,0) μg/l |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-EN ISO 17993:2005 IN-58 issue 7 of 20.12.2023 | |
| 218 | Water, wastewater | Concentration of polycyclic aromatic hydrocarbons Acenaphthylene (0,0040 – 2,0) μg/l |
High-performance liquid chromatography with spectrometric detection (HPLC-UV/Vis) | PN-EN ISO 17993:2005 IN-58 issue 7 of 20.12.2023 | |
| 219 | Water, wastewater | Sum of PAH (calculated) | PN-EN ISO 17993:2005 IN-58 issue 7 of 20.12.2023 | ||
| 220 | Water, wastewater | Mineral oil index Range (0,10 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 221 | Water, wastewater | Concentration of C12-C35 hydrocarbons (oil fraction components) Range (0,10 – 100) mg/l |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 9377-2:2003 | |
| 222 | Water, wastewater | Concentration of C6-C12 hydrocarbons (gasoline fraction components) Range (0,005 – 250) mg/l |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PB-134 issue 3 of 14.01.2019 | |
| 223 | Water, wastewater | Chlorophenol concentration pentachlorophenol (PCP) 2,4,6 trichlorophenol Range (0,050 – 500,0) μg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN 12673:2004 | |
| 224 | Water, wastewater | Volatile hydrocarbon concentration aromatic BTEX benzene ethylbenzene toluene o,m,p-xylene styrene Range (0,10 – 200) μg/l |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-ISO 11423-1:2002 | |
| 225 | Water, wastewater | Phenol and cresol concentration phenol (0,40 – 400,0) μg/l o,m,p-cresol (0,40 – 400,0) μg/l |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-EN 12673:2004 IN-125 issue 3 of 18.03.2019 | |
| 226 | Water, wastewater | Sum of cresols (calculated) | PN-EN 12673:2004 IN-125 issue 3 of 18.03.2019 | ||
| 227 | Water, wastewater | Concentration of highly volatile halogenated hydrocarbon derivatives: Trichloromethane (chloroform) Range (0,20 – 5000) μg/l Carbon tetrachloride (tetrachloromethane) (0,20 – 5000) μg/l 1,2 – dichloroethane (EDC) (0,50 – 10000) μg/l Trichloroethene (trichloroethylene) (0,20 – 5000) μg/l Tetrachloroethene (tetrachloroethylene) (0,20 – 5000) μg/l Bromodichloromethane Dibromochloromethane Tribromomethane (bromoform) (0,50 – 500) μg/l Hexachlorobutadiene (HCBD) (0,20 – 5000) μg/l |
Gas chromatography with headspace analysis and mass spectrometry detection (HS-GC-MS) | PN-EN ISO 10301:2002 | |
| 228 | Water, wastewater | Vinyl chloride concentration Range (0,10 – 40) μg/l |
By the method using headspace solid-phase microextraction with mass spectrometry detection (HS-SPME-GC-MS) | PN-EN ISO 17943:2016 | |
| 229 | Water, wastewater | Organochlorine concentration insecticides: aldrin dieldrin endrin isodrin heptachlor heptachlor epoxide isomer A heptachlor epoxide isomer B α - hexachlorocyclohexane (α-HCH) β - hexachlorocyclohexane (β-HCH) γ - hexachlorocyclohexane (γ-HCH) δ - hexachlorocyclohexane (δ-HCH) o,p’- dichlorodiphenyldichloroethylene (o,p’ -DDE) p,p’ - dichlorodiphenyldichloroethylene (p,p’ -DDE) o,p’ - dichlorodiphenyldichloroethane (o,p’ – DDD) p,p’ - dichlorodiphenyldichloroethane (p,p’ -DDD) o,p’ - dichlorodiphenyltrichloroethane (o,p’ -DDT) p,p’ - dichlorodiphenyltrichloroethane (p,p’ -DDT) methoxychlor (DMDT) α - endosulfan β - endosulfan Range (0,007 – 10,0) μg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN ISO 6468:2002 | |
| 230 | Water, wastewater | Chlorobenzene concentration: 1,2,3-trichlorobenzene 1,2,4-trichlorobenzene 1,3,5-trichlorobenzene Range (0,025 – 500,0) μg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN ISO 6468:2002 | |
| 231 | Water, wastewater | Polychlorinated biphenyl concentration: PCB 28 PCB 52 PCB 101 PCB 138 PCB 153 PCB 180 Range (0,010 – 100,0) μg/l |
Gas chromatography with electron capture detection (GC-ECD) | PN-EN ISO 6468:2002 | |
| 232 | Water, wastewater | Total dissolved nitrogen concentration Range (0,50 – 3000) mg/l |
High-temperature combustion with chemiluminescence detection | PN-EN ISO 20236:2025-05 | |
| 233 | Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 234 | Soil | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | |
| 235 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 01 99, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Mercury concentration Range (0,00010 – 0,5) mg/l Mercury content (calculated) |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 | PN-EN ISO 12846:2012/Ap1:2016-07 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 236 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element concentration zinc (0,040 – 1000) mg/l copper (0,010 – 1000) mg/l nickel (0,010 – 1000) mg/l lead (0,010 – 1000) mg/l cadmium (0,002 – 1000 mg/l total chromium (0,010 – 1000) mg/l barium (0,10 – 1000) mg/l iron (0,020 – 1000) mg/l arsenic (0,0020 –1000) mg/l antimony (0,005 – 1000)) mg/l selenium (0,009 – 1000) mg/l molybdenum (0,0010 – 1000) mg/l cobalt (0,006 – 1000) mg/l boron (0,05 – 1000) mg/l tin (0,006 – 1000) mg/l titanium (0,008 – 1000) mg/l thallium (0,07 – 1000) mg/l lithium (0,004 – 1000) mg/l sodium (4,0 – 55000) mg/l potassium (0,90 – 5000) mg/l Element content (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 237 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element concentration arsenic (0,0020 – 1000) mg/l antimony (0,005 – 1000)) mg/l selenium (0,009 – 1000) mg/l tin (0,006 – 1000) mg/l Element content (calculated) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 238 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Sulfate concentration Range (10 – 10000) mg/l Sulphate content (calculated) |
Spectrophotometric method | PB-07 issue 7 of 29.12.2023 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 239 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Chloride concentration Range (3,00 – 1000) mg/l Chloride content (calculated) |
Titrimetric method | PN-ISO 9297:1994 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 240 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Phenol index (volatile phenols) Range (0,002 – 1,0) mg/l Phenol index in mg/kg (calculated) |
Spectrophotometric method | PN-ISO 6439:1994 method B | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 241 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Fluoride concentration Range (0,10 – 1000) mg/l Fluoride content (calculated) |
Potentiometric method | PN-78/C-04588/03 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 242 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Concentration of solid compounds dissolved (dissolved solids) TDS Range (10 – 500000) mg/l Total dissolved solids content (dissolved solids) TDS (calculated) |
Gravimetric method | PN-EN 15216:2022-03 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 243 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Chemical oxygen demand - COD-Cr Range (15 – 25000) mg/l O2 COD in mg/kg O2 (calculated) |
Spectrophotometric method | PN-ISO 15705:2005 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 244 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Sulphide and hydrogen sulphide concentration Range (0,010 – 100) mg/l Sulphide and hydrogen sulphide content (calculated) |
Spectrophotometric method | PB-103 issue 6 of 20.02.2026 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 245 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Dissolved organic carbon (DOC) concentration Range (1,50 – 2000) mg/l Dissolved organic carbon (DOC) content (calculated) |
High-temperature combustion with IR detection | PN-EN 1484:1999 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-EN ISO 20236:2025-05 | |
| 246 | Soil, Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total alkalinity (Acid neutralizing capacity ANC) Range (0,40 – 50) mmol/l Range (20,0 – 2500) mg/l CaCO3 Total alkalinity (Acid neutralisation capacity ANC) in mg/kg (calculated) |
Titrimetric method | PN-EN ISO 9963-1:2001 cl. 8.2 | PN-EN ISO 9963-1:2001/Ap1:2004 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 P N -G-11011:1998 | |
| 247 | Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Anion concentrations Nitrates (0,10 – 5000) mg/l Nitrites (0,10 – 1000) mg/l Chlorides (1,00 – 100 000) mg/l Phosphates (0,20 – 1000) mg/l Fluorides (0,10 – 1000) mg/l Sulfates (1,00 – 10 000) mg/l Anion content (calculated) |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 248 | Aggregates, Sewage sludge, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Ammonium nitrogen concentration Range (0,05 – 1000) mg/l Ammonium nitrogen content (calculated) |
Spectrophotometric method | PN-ISO 7150-1:2002 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 249 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel – alternative fuel, solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content silicon (100 – 500000) mg/kg aluminium (500 – 500000) mg/kg iron (500 – 500000) mg/kg calcium (500 – 700000) mg/kg magnesium (500 – 600000) mg/kg titanium (4,0 – 200000) mg/kg manganese (4 – 200000) mg/kg sodium (1000 – 500000) mg/kg potassium (500 – 500000) mg/kg strontium (4 – 100000) mg/kg barium (4 – 900000) mg/kg silver (4 – 100000) mg/kg Content of element oxides (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PB-31 issue 8 of 27.12.2023 | |
| 250 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel – alternative fuel, solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content zinc (4 – 100000) mg/kg cadmium (4 – 100000) mg/kg cobalt (4 – 100000) mg/kg chromium (4 – 100000) mg/kg copper (4 – 100000) mg/kg nickel (4 – 100000) mg/kg lead (4 – 100000) mg/kg vanadium (4 – 100000) mg/kg tin (4 – 100000) mg/kg molybdenum (4 – 100000) mg/kg arsenic (4 – 100000) mg/kg antimony (4 – 100000) mg/kg phosphorus (50 – 400000) mg/kg rubidium (50 – 100000) mg/kg beryllium (4 – 100000) mg/kg sulfur (200 – 120000) mg/kg Content of element oxides (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PB-31 issue 8 of 27.12.2023 | |
| 251 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel – alternative fuel, solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content arsenic (4 – 100000) mg/kg antimony (4 – 100000) mg/kg tin (4 – 100000) mg/kg Content of element oxides (calculated) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB-31 issue 8 of 27.12.2023 | |
| 252 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel – alternative fuel, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 24, 10 01 80, 10 01 82, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) silicon (100 – 500 000) mg/kg aluminium (500 – 500 000) mg/kg iron (500 – 500 000) mg/kg calcium (500 – 700 000) mg/kg magnesium (500 – 600 000) mg/kg titanium (4,0 – 200 000) mg/kg manganese (4 – 200 000) mg/kg sodium (1000 – 500 000) mg/kg potassium (500 – 500 000) mg/kg strontium (4 – 100 000) mg/kg barium (4 – 900 000) mg/kg silver (4 – 100 000) mg/kg zinc (4 – 200 000) mg/kg cadmium (4 – 100 000) mg/kg cobalt (4 – 100 000) mg/kg Content of element oxides (in ashed samples) (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ASTM D 6349-21 | |
| 253 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel – alternative fuel, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 24, 10 01 80, 10 01 82, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) chromium (4 – 100 000) mg/kg copper (4 – 200 000) mg/kg nickel (4 – 100 000) mg/kg lead (4 – 100 000) mg/kg vanadium (4 – 100 000) mg/kg tin (4 – 100 000) mg/kg molybdenum (4 – 100 000) mg/kg arsenic (4 – 100 000) mg/kg antimony (4 – 100 000) mg/kg phosphorus (50 – 400 000) mg/kg rubidium (50 – 100 000) mg/kg beryllium (4 – 100 000) mg/kg thallium (4 – 100 000) mg/kg lithium (4 – 100 000) mg/kg sulfur (200 – 120 000) mg/kg selenium (50 – 100 000) mg/kg Content of element oxides in ashed samples (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ASTM D 6349-21 | |
| 254 | Aggregates, Solid fuels: hard coal, lignite, coke, solid recovered fuel - alternative fuel, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 24, 10 01 80, 10 01 82, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) arsenic (4 – 100 000) mg/kg antimony (4 – 100 000) mg/kg tin (4 – 100 000) mg/kg selenium (50 – 100 000) mg/kg Content of element oxides in ashed samples (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | ASTM D 6349-21 | |
| 255 | Solid fuels: hard coal | Boron content (samples after ashing) Range (50 – 10 000) mg/kg Content of boron oxide in ashed samples (calculated) Content of boron and boron oxide in non-ashed samples (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ASTM D 6349-21 | |
| 256 | Aggregates, Solid fuels: solid recovered fuel (SRF), solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) silicon (200 – 500 000) mg/kg aluminium (1000 – 500 000) mg/kg iron (1000 – 500 000) mg/kg calcium (1000 – 700 000) mg/kg magnesium (1000 – 600 000) mg/kg titanium (8,0 – 200 000) mg/kg manganese (8,0 – 200 000) mg/kg sodium (2000 – 500 000) mg/kg potassium (1000 – 500 000) mg/kg strontium (8 – 100 000) mg/kg barium (8 – 900 000) mg/kg silver (8 – 100 000) mg/kg zinc (8 – 100 000) mg/kg Content of element oxides in ashed samples (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 16967:2015-06 method B | PN-EN ISO 16968:2015-07 | |
| 257 | Aggregates, Solid fuels: solid recovered fuel (SRF), solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) arsenic (8 – 100 000) mg/kg antimony (8 – 100 000) mg/kg phosphorus (100 – 400 000) mg/kg rubidium (100 – 100 000) mg/kg beryllium (8 – 100 000) mg/kg thallium (8 – 100 000) mg/kg lithium (8 – 100 000) mg/kg sulfur (400 – 120 000) mg/kg cadmium (8 – 100 000) mg/kg cobalt (8 – 100 000) mg/kg chromium (8 – 100 000) mg/kg copper (8 – 100 000) mg/kg nickel (8 – 100 000) mg/kg lead (8 – 100 000) mg/kg vanadium (8 – 100 000) mg/kg tin (8 – 100 000) mg/kg molybdenum (8 – 100 000) mg/kg Content of element oxides in ashed samples (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 16967:2015-06 method B | PN-EN ISO 16968:2015-07 | |
| 258 | Aggregates, Solid fuels: solid recovered fuel (SRF), solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content (samples after ashing) arsenic (8 – 100 000) mg/kg antimony (8 – 100 000) mg/kg tin (8 – 100 000) mg/kg Content of element oxides in ashed samples (calculated) Content of elements and their oxides in non-ashed samples (calculated) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 16967:2015-06 method B | PN-EN ISO 16968:2015-07 | |
| 259 | Aggregates, Solid fuels: solid recovered fuel (SRF), solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content barium (0,8 – 900 000) mg/kg silver (0,8 – 100 000) mg/kg zinc (0,8 – 100 000) mg/kg cadmium (0,8 – 100 000) mg/kg cobalt (0,8 – 100 000) mg/kg chromium (0,8 – 100 000) mg/kg copper (0,8 – 100 000) mg/kg nickel (0,8 – 100 000) mg/kg lead (0,8 – 100 000) mg/kg vanadium (0,8 – 100 000) mg/kg tin (0,8 – 100 000) mg/kg molybdenum (0,8 – 100 000) mg/kg arsenic (0,8 – 100 000) mg/kg antimony (0,8 – 100 000) mg/kg phosphorus (10 – 400 000) mg/kg rubidium (10 – 100 000) mg/kg beryllium (0,8 – 100 000) mg/kg thallium (0,8 – 100 000) mg/kg lithium (0,8 – 100 000) mg/kg sulfur (40 – 120 000) mg/kg silicon (20 – 500 000) mg/kg aluminium (100 – 500 000) mg/kg iron (100 – 500 000) mg/kg calcium (100 – 700 000) mg/kg magnesium (100 – 600 000) mg/kg titanium (0,8 – 200 000) mg/kg manganese (0,8 – 200 000) mg/kg sodium (200 – 500 000) mg/kg potassium (100 – 500 000) mg/kg strontium (0,8 – 100 000) mg/kg Content of element oxides (calculated) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 16967:2015-06 Method A | PN-EN ISO 16968:2015-07 | |
| 260 | Aggregates, Solid fuels: solid recovered fuel (SRF), solid biomass – solid biofuel, Waste code: 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Element content arsenic (0,8 – 100 000) mg/kg antimony (0,8 – 100 000) mg/kg tin (0,8 – 100 000) mg/kg Content of element oxides (calculated) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 16967:2015-06 Method A | PN-EN ISO 16968:2015-07 | |
| 261 | Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 24, 10 01 80, 10 01 82, 02 01 03, 02 01 07, 03 01 01, 03 01 05, 03 03 01, 04 02 09, 04 02 21, 04 02 22, 07 02 13, 07 02 80, 15 01 01, 15 01 02, 15 01 03, 15 01 05, 15 01 06, 15 02 03, 16 08 02*, 17 01 01, 17 01 02, 17 01 03, 17 01 06*, 17 01 07*, 17 01 80, 17 01 81, 17 02 01, 17 02 03, 17 02 04*, 17 05 03*, 17 05 04, 17 05 05*, 17 05 06*, 17 09 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 09 99, 19 12 10, 20 01 38, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Cadmium content Range (0,2 – 8,0) mg/kg Cadmium oxide content (calculated) |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PB-136 issue 4 of 21.01.2021 | |
| 262 | Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel - alternative fuel, solid biomass – solid biofuel, solid recovered fuel (SRF), Waste code: 02 01 03, 02 01 07, 07 02 80, 15 01 05, 15 01 06, 16 08 02*, 19 12 10 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Total carbon content (TC) Range (5 – 950) g/kg Total inorganic carbon content (TIC) Range (5 – 250) g/kg Total organic carbon content (TOC) (calculated) |
High-temperature combustion with IR detection; Infrared spectrometry (IR) | PN-EN 13137:2004 | |
| 263 | Aggregates | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | PN-EN 12457-4:2006 | |
| 264 | Solid fuels: hard coal | Bromine content Range (0,0010 – 0,200) % |
Ion chromatography with conductometric detection (IC-CD) | PN-EN 15408:2011 | |
| 265 | Solid fuels: solid biomass – solid biofuel | Cadmium content (samples after ashing) Range (0,4 – 8,0) mg/kg Cadmium oxide content (calculated) |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PB-136 issue 4 of 21.01.2021 | |
| 266 | Solid fuels: solid biomass – solid biofuel | Cadmium content (samples without ashing) Range (0,2 – 8,0) mg/kg Cadmium oxide content (calculated) |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PB-136 issue 4 of 21.01.2021 | |
| 267 | Soil | pH – in KCl, pH – in H2O, pH – in CaCl2 Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10390:2022-09 | |
| 268 | Soil | Electrical conductivity Range (7,0 – 16000) μS/cm |
Conductometric method | PN-ISO 11265+AC1:1997 | |
| 269 | Soil | Total carbon content (TC) Range (5 – 950) g/kg Total inorganic carbon content (TIC) Range (5 – 250) g/kg Total organic carbon content (TOC) (calculated) |
High-temperature combustion with IR detection; Infrared spectrometry (IR) | PN-ISO 10694:2002 | |
| 270 | Soil | Mercury content Range (0,030 – 100) mg/kg |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-ISO 16772:2009 | PN-ISO 11466:2002 | |
| 271 | Soil | Element content antimony (0,170 – 2800) mg/kg arsenic (0,170 – 3200) mg/kg barium (10,0 – 4400) mg/kg chromium (1,70 – 4700) mg/kg tin (1,70 – 3400) mg/kg zinc (3,20 – 3700) mg/kg cadmium (0,088 – 5200) mg/kg cobalt (1,70 – 3900) mg/kg manganese (1,70 – 4100) mg/kg copper (1,70 – 3000) mg/kg molybdenum (0,170 – 4100) mg/kg nickel (1,70 – 3900) mg/kg lead (1,70 – 3600) mg/kg mercury (0,017 – 420,0) mg/kg selenium (0,200 – 3700) mg/kg thallium (1,70 – 4200) mg/kg |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | PN-ISO 11466:2002 | |
| 272 | Soil | Element content antimony (0,170 – 2800) mg/kg arsenic (0,170 – 3200) mg/kg tin (1,70 – 3400) mg/kg selenium (0,200 – 3700) mg/kg |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 11885:2009 | PN-ISO 11466:2002 | |
| 273 | Soil | Content of elements, Range chromium (1,70 – 3500) mg/kg zinc (1,70 – 3000) mg/kg cadmium (0,70 – 3700) mg/kg cobalt (1,70 – 3300) mg/kg manganese (13,7 – 4300) mg/kg copper (1,70 – 3300) mg/kg nickel (1,70 – 3500) mg/kg lead (1,70 – 3400) mg/kg | Flame atomic absorption spectrometry (FAAS) | PN-ISO 11047:2001 | |
| 274 | Soil | Element content cadmium (0,0130 – 36,0) mg/kg molybdenum (0,170 – 3800) mg/kg |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-ISO 11047:2001 | |
| 275 | Soil | Element content antimony (0,0700 – 3200) mg/kg arsenic (0,250 – 3100) mg/kg selenium (0,0700 – 3400) mg/kg |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-ISO 20280:2010 | |
| 276 | Soil | Thallium content Range (0,380 – 100,0) mg/kg |
Electrothermal atomization atomic absorption spectrometry (ETAAS) | PN-ISO 20279:2010 | |
| 277 | Soil | Phenol and cresol content phenol (0,020 – 100) mg/kg o,m,p-cresol (0,020 – 100) mg/kg |
Gas chromatography with mass spectrometry detection (GC-MS) | PN ISO 14154:2008 IN-172 issue 3 of 18.03.2019 | |
| 278 | Soil | Mineral oil content (C10 – C40) Range (15 – 4000) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 279 | Soil | Volatile aromatic hydrocarbon BTEX content benzene (0,010 – 150) mg/kg ethylbenzene (0,010 – 150) mg/kg toluene (0,010 – 150) mg/kg o,m,p- xylene (0,010 – 150) mg/kg styrene (0,010 – 150) mg/kg |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PN-EN ISO 22155:2016-07 | |
| 280 | Soil | Content of polycyclic aromatic hydrocarbons PAH: naphthalene (0,010 – 1500) mg/kg acenaphthene (0,010 – 1500) mg/kg acenaphthylene (0,010 – 150,0) mg/kg fluorene (0,010 – 20,0) mg/kg anthracene (0,010 – 650,0) mg/kg phenanthrene (0,010 – 1650) mg/kg fluoranthene (0,010 – 1600) mg/kg pyrene (0,010 – 1600) mg/kg benzo(a)anthracene (0,010 – 950,0) mg/kg chrysene (0,010 – 650,0) mg/kg benzo(a)fluoranthene (0,010 – 200,0) mg/kg benzo(b)fluoranthene (0,010 – 500,0) mg/kg benzo(k)fluoranthene (0,010 – 600,0) mg/kg benzo(a)pyrene (0,010 – 350,0) mg/kg benzo(e)pyrene (0,010 – 300,0) mg/kg indeno(1,2,3-cd)pyrene (0,010 – 150,0) mg/kg dibenzo(a,h)anthracene (0,010 – 60,0) mg/kg perylene (0,010 – 200,0) mg/kg benzo(ghi)perylene (0,010 – 200,0) mg/kg Sum of PAH (calculated) |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-ISO 18287:2008 | |
| 281 | Soil, Solid fuels: hard coal, lignite, coke, secondary fuel- alternative fuel | Content of hydrocarbons C12 – C35 (components of the oil fraction) Range (15 – 4000) mg/kg |
Gas chromatography with flame ionization detection (GC-FID) | PN-EN ISO 16703:2011 | |
| 282 | Soil, Solid fuels: hard coal, lignite, coke, secondary fuel- alternative fuel | Content of hydrocarbons C6 – C12 (components of the petrol fraction) Range (0,5 – 1000) mg/kg |
Headspace gas chromatography with flame ionization detection (HS-GC-FID) | PB-134 issue 3 of 14.01.2019 | |
| 283 | General environment - waste gas samples collected on sorbent tubes - air samples collected on sorbent tubes | Content of organic compounds benzene (1 – 5000) μg in the sample ethylbenzene (1 – 5000) μg in the sample o-xylene (1 – 5000) μg in the sample toluene (1 – 5000) μg in the sample ethyl acetate (1 – 5000) μg in the sample n-butyl acetate Range (1 – 5000) μg in the sample pentane (1 – 5000) μg in the sample hexane (1 – 5000) μg in the sample heptane (1 – 5000) μg in the sample octane (1 – 5000) μg in the sample nonane (1 – 5000) μg in the sample decane (1 – 5000) μg in the sample undecane (1 – 5000) μg in the sample dodecane (1 – 5000) μg in the sample cyclohexane (1 – 5000) μg in the sample propan-2-ol (1 – 5000) μg in the sample acetone (1 – 5000) μg in the sample butan-1-ol (1 – 5000) μg in the sample m,p-xylene (2 – 10000) μg in the sample |
Gas chromatography with mass spectrometry detection (GC-MS) | PN-EN 13649:2005 | |
| 284 | General environment - waste gas samples collected on sorbent tubes - air samples collected on sorbent tubes | Sum of aromatic hydrocarbon contents (calculated) | PN-EN 13649:2005 | ||
| 285 | General environment - waste gas samples collected on sorbent tubes - air samples collected on sorbent tubes | Sum of aliphatic hydrocarbon content (sum C5-C12) (calculated) | PN-EN 13649:2005 | ||
| 286 | General environment - waste gas samples collected on a filter and into absorbing solutions | Metal content arsenic (0,00020 – 1,0) mg in the sample, cadmium (0,00020 – 1,0) mg in the sample, chromium (0,00020 – 1,0) mg in the sample, cobalt (0,00020 – 1,0) mg in the sample, copper (0,00030 – 1,0) mg in the sample, manganese (0,00020 – 1,0) mg in the sample, nickel (0,00080 – 1,0) mg in the sample, lead (0,00020 – 1,0) mg in the sample, antimony (0,00020– 1,0) mg in the sample, thallium (0,00020 – 1,0) mg in the sample, vanadium (0,00020 – 1,0) mg in the sample, aluminium (0,025 – 30,0) mg in the sample, iron (0,025 – 30,0) mg in the sample, titanium (0,0010– 1,0) mg in the sample, zinc (0,00050 – 1,0) mg in the sample, tin (0,00050 – 1,0) mg in the sample, selenium (0,00050 – 1,0) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN 14385:2025-05 | |
| 287 | General environment - waste gas samples collected on a filter and into absorbing solutions | Mercury content Range (0,010 – 2,0) μg in the sample |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN 13211:2006+AC:2006 | |
| 288 | General environment - waste gas samples collected on a filter and into absorbing solutions | Metal content arsenic (0,00020 – 1,0) mg in the sample, antimony (0,00020 – 1,0) mg in the sample, tin (0,0005– 1,0) mg in the sample, selenium (0,0005 – 1,0) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN 14385:2025-05 | |
| 289 | General environment - waste gas samples collected into absorbing solution | Phenol content Range (0,0020 – 2,25) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PB-128 issue 12 of 29.04.2026 | |
| 290 | General environment - waste gas samples collected into absorbing solution | Cresol content (o-cresol, m-cresol, p-cresol) o-cresol Range (0,0020 – 2,25) mg in the sample m,p-cresol Range (0,0040 – 4,50) mg in the sample Sum of cresols (calculated) |
Gas chromatography with flame ionization detection (GC-FID) | PB-128 issue 12 of 29.04.2026 | |
| 291 | General environment - waste gas samples collected into absorbing solution | Hydrogen chloride content Range (0,10 – 100) mg in the sample |
Spectrophotometric method | PN-EN 1911:2011 | |
| 292 | General environment - waste gas samples collected into absorbing solution | Sulfur dioxide content Range (0,015 – 60,0) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | PN-EN 14791:2017-04 | |
| 293 | General environment - waste gas samples collected on a filter and adsorbers | PAH content Naphthalene (0,4 – 4,0) μg in sample Acenaphthene (0,4 – 4,0) μg in sample Fluorene (0,4 – 4,0) μg in sample Phenanthrene (0,4 – 4,0) μg in sample Anthracene (0,4 – 4,0) μg in sample Fluoranthene (0,4 – 4,0) μg in sample Pyrene (0,4 – 4,0) μg in sample Benzo(a)anthracene Range (0,4 – 4,0) μg in sample Chrysene (0,4 – 4,0) μg in sample Benzo(b)fluoranthene (0,4 – 4,0) μg in sample Benzo(k)fluoranthene (0,4 – 4,0) μg in sample Benzo(a)pyrene (0,4 – 4,0) μg in sample Dibenzo(a,h)anthracene (0,4 – 4,0) μg in sample Benzo(g,h,i)perylene (0,4 – 4,0) μg in sample Indeno (1,2,3-cd)pyrene (0,4 – 4,0) μg in sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | ISO 11338-2:2003 | |
| 294 | General environment - waste gas samples collected on a filter and adsorbers | PAH content Naphthalene (0,4 – 4,0) μg in sample Acenaphthene (0,4 – 4,0) μg in sample Fluorene (0,4 – 4,0) μg in sample Phenanthrene (0,4 – 4,0) μg in sample Anthracene (0,4 – 4,0) μg in sample Fluoranthene (0,4 – 4,0) μg in sample Pyrene (0,4 – 4,0) μg in sample Benzo(a)anthracene Range (0,4 – 4,0) μg in sample Chrysene (0,4 – 4,0) μg in sample Benzo(b)fluoranthene (0,4 – 4,0) μg in sample Benzo(k)fluoranthene (0,4 – 4,0) μg in sample Benzo(a)pyrene (0,4 – 4,0) μg in sample Dibenzo(a,h)anthracene (0,4 – 4,0) μg in sample Benzo(g,h,i)perylene (0,4 – 4,0) μg in sample Indeno (1,2,3-cd)pyrene (0,4 – 4,0) μg in sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | ISO 11338-2:2003 | |
| 295 | General environment - waste gas samples collected into absorbing solution | Ammonia content Range (0,0038 – 3,0) mg in the sample |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 296 | General environment - waste gas samples collected into absorbing solution | Hydrogen fluoride content Range (0,0053 – 26,3) mg in the sample |
Potentiometric method | ISO 15713:2006 | |
| 297 | Workplace environment - air | Sampling for the assessment of occupational exposure to: industrial dusts inhalable fraction respirable fraction organic substances inorganic substances, including inhalable fraction respirable fraction thoracic fraction metals and their compounds, including inhalable fraction respirable fraction |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 298 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 299 | Workplace environment - air | Carbon monoxide concentration Range (2,3 – 465) mg/m3 Range (2,0 – 400) ppm |
Electrochemical method | PB-10 issue 6 of 22.12.2023 | |
| 300 | Workplace environment - air samples collected on filters | Concentration/ content of phenolphthalein Range (0,080 – 4,00) mg in the sample Range (0,33 –16,7) mg/m3 |
Liquid chromatography with spectrophotometric detection (HPLC-UV) | PN-Z-04506:2019-10 | |
| 301 | Workplace environment - air - air samples collected on filters | Concentration/ content of metals and their compounds Iron oxides expressed as Fe inhalable fraction respirable fraction Range (0,069 – 43,86) mg/m3 Range (0,05 -7,50) mg in the sample Manganese and its inorganic compounds – expressed as Mn inhalable fraction respirable fraction (0,0035 – 0,877) mg/m3 (0,0025 – 0,30) mg in the sample Lead and its inorganic compounds – expressed as Pb inhalable fraction (0,0017 – 0,417) mg/m3 (0,00125 – 0,075) mg in the sample Copper and its inorganic compounds – expressed as Cu (0,017 – 0,83) mg/m3 (0,0125 – 0,300) mg in the sample Zinc oxide - expressed as Zn inhalable fraction (0,208 – 41,7) mg/m3 (0,150 – 7,50) mg in the sample Cadmium and its inorganic compounds – expressed as Cd inhalable fraction (0,000069 – 0,0174) mg/m3 (0,00005 – 0,00625) mg in the sample Calcium carbonate inhalable fraction (0,868 – 40,0) mg/m3 (0,625 – 14,4) mg in the sample Calcium hydroxide inhalable fraction respirable fraction (0,032 – 16,0) mg/m3 (0,023 – 2,88) mg in the sample Metallic chromium and its compounds (chromium (II), chromium (III), chromium (VI)) – expressed as chromium (0,025 – 0,75) mg in the sample (0,035 – 2,08) mg/m3 |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ISO 15202-3:2004 | |
| 302 | Workplace environment - air - air samples collected on filters | Metallic chromium, Chromium(II) compounds - expressed as, Cr(II), Chromium(III) compounds – expressed as, Cr(III) (calculated) | PB-146 issue 1 of 13.02.2023 | ||
| 303 | Workplace environment - air - air samples collected on filters | Concentration/content of metals and their compounds Aluminium oxide - calculated as Al: inhalable fraction respirable fraction Range (0,069 – 11,70) mg/m3 Range (0,050 – 4,00) mg in the sample Nickel compounds – calculated as Ni respirable fraction inhalable fraction (0,00069 – 1,042) mg/m3 (0,0005 – 0,375) mg in the sample Metallic nickel (0,00069 – 1,042) mg/m3 (0,0005 – 0,375) mg in the sample Tin and its inorganic compounds, excluding stannane - expressed as Sn inhalable fraction (0,1736 – 8,33) mg/m3 (0,125 – 3,00) mg in the sample Antimony and its inorganic compounds, excluding stibane - expressed as Sb (0,0347 – 4,20) mg/m3 (0,025 – 0,75) mg in the sample Arsenic and its inorganic compounds expressed as As inhalable fraction (0,0003 – 0,042) mg/m3 (0,00025 – 0,015) mg in the sample Barium and its soluble compounds calculated as Ba (0,0347 – 2,20) mg/m3 (0,025 – 0,80) mg in the sample Cobalt and its inorganic compounds calculated, as Co (0,0017 – 0,104) mg/m3 (0,00125 – 0,0375) mg in the sample Magnesium oxide - inhalable fraction (0,864 - 46,10) mg/m3 (0,622 – 16,58) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ISO 15202-3:2004 | |
| 304 | Workplace environment - air - air samples collected on filters | Concentration/content of metals and their compounds Molybdenum and its compounds calculated as Mo Range (0,1736 – 34,7) mg/m3 Range (0,125 – 6,25) mg in the sample Selenium and its compounds, excluding hydrogen selenide expressed as Se (0,0034 – 0,417) mg/m3 (0,0025 – 0,15) mg in the sample Silver inhalable fraction, insoluble and soluble silver compounds - expressed as Ag, (0,00083 – 0,104) mg/m3 (0,0006 – 0,075) mg in the sample Thallium and its compounds - expressed as Tl (0,0034 – 0,833) mg/m3 (0,0025 – 0,15) mg in the sample Vanadium pentoxide inhalable fraction (0,0036 – 0,222) mg/m3 (0,0031 – 0,080) mg in the sample Titanium and its compounds - expressed as Ti (0,521 – 24,3) mg/m3 (0,375 – 8,75) mg in the sample Calcium oxide inhalable fraction respirable fraction (0,0238 – 19,4) mg/m3 (0,0175 – 3,495) mg in the sample |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | ISO 15202-3:2004 | |
| 305 | Workplace environment - air - air samples collected on filters | Concentration/content of metals and their compounds Antimony and its inorganic compounds, excluding stibane - expressed as Sb Range (0,0347 – 4,20) mg/m3 Range (0,025 – 0,75) mg in the sample Arsenic and its inorganic compounds expressed as As (0,0003 – 0,042) mg/m3 (0,00025 – 0,015) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | ISO 15202-3:2004 | |
| 306 | Workplace environment - air - air samples collected on filters | Concentration/content of metals and their compounds Selenium and its compounds, excluding hydrogen selenide expressed as Se Range (0,0034 – 0,417) mg/m3 Range (0,0025 – 0,15) mg in the sample Tin and its inorganic compounds excluding stannane - expressed as Sn inhalable fraction (0,1736 – 8,33) mg/m3 (0,125 – 3,00) mg in the sample |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | ISO 15202-3:2004 | |
| 307 | Workplace environment - air - air samples collected on filters | Concentration/content of 2,4-TDI; 2,6-TDI; HDI, MDI Toluene-2,4-diyl diisocyanate (2,4-TDI) Range (0,000056 – 1,33) mg/m3 Range (0,000010 – 0,020) mg/sample Toluene-2,6-diyl diisocyanate (2,6-TDI) (0,00011 – 1,33) mg/m3 (0,000020 – 0,020) mg/in the sample Hexane-1,6-diyl diisocyanate (HDI) (0,00033 – 1,33) mg/m3 (0,000060 – 0,020) mg/in sample Methylenebis(phenyl isocyanate) (MDI) (0,00033 – 1,33) mg/m3 (0,000060 – 0,020) mg/in sample |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | Medycyna Pracy (Occupational Medicine): issue No. 66 (3), pp. 291-301, 2015 | |
| 308 | Workplace environment - air - air samples collected on filters | Potassium hydroxide concentration/content Range (0,01 – 1,00) mg/m3 Range (0,0072 – 0,72) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 309 | Workplace environment - air - air samples collected on filters | Sodium hydroxide concentration/content Range (0,01 – 1,00) mg/m3 Range (0,0087 – 0,72) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 310 | Workplace environment - air - air samples collected on filters | Sulfuric(VI) acid concentration/content - thoracic fraction Range (0,0010 – 0,058) mg in the sample Range (0,0017 – 0,100) mg/m3 |
Ion chromatography with conductometric detection (IC-CD) | Principles and Methods of Assessing the Working Environment: issue 1 (71) pp. 97-103, 2012 Principles and Methods of Assessing the Working Environment: issue 2 (92) pp. 5-19, 2017 | |
| 311 | Workplace environment - air - air samples collected on filters | Crystalline silica (quartz) concentration/content respirable fraction Range (5 – 1000) μg in the sample Range (0,001 – 8,77) mg/m3 Concentration/content of crystalline silica (cristobalite) respirable fraction Range (5 – 400) μg in the sample Range (0,001 – 0,50) mg/m3 |
Fourier transform infrared spectrometry (FT-IR) | Principles and Methods of Assessing the Working Environment: issue No. 4, pp. 117-130, 2012 | |
| 312 | Workplace environment - air - air samples collected on filters | Concentration of dust harmful to health - respirable fraction Apatites and phosphorites Portland cement Natural graphite Amorphous and synthetic silica Organic dusts of animal and plant origin, excluding wood and flour dusts Coal (hard, brown) Range (0,15 – 400) mg/m3 Range (0,1 – 50) mg in the sample |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/Ap1:2022-08 | PN-G-04035:2002+AZ1:2005 | |
| 313 | Workplace environment - air - air samples collected on filters | Concentration of harmful dust agents - inhalable fraction Apatites and phosphorites Portland cement Titanium dioxide Natural graphite Synthetic graphite Kaolin Amorphous and synthetic silica Wood dusts Flour dusts Dusts not classified according to toxicity Organic dusts of animal and plant origin, excluding wood and flour dusts Calcium sulfate (VI) (gypsum) Carbon black Coal (hard, brown) Calcium magnesium carbonate (dolomite) Silicon carbide, non-fibrous Range (0,14 – 400) mg/m3 Range (0,1 – 50) mg in the sample |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/Ap1:2022-08 | PN-G-04035:2002+AZ1:2005 | |
| 314 | Workplace environment - air - air samples collected into absorbing solutions | Concentration/content of nitrogen oxides NO (0,288 – 23,1) mg/m3 Range (0,0013 – 0,052) mg in the sample Range (0,231 – 18,6) ppm NO2 (0,089 – 7,11) mg/m3 (0,00040 – 0,016) mg in the sample (0,047 – 3,73) ppm |
Spectrophotometric method | PN-Z-04009-11:2008 | |
| 315 | Workplace environment - air - air samples collected on sorbent tubes | Formaldehyde concentration and content Range (0,0167 –10,0) mg/m3 Range (0,00010 – 0,06) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Principles and Methods of Assessing the Working Environment: issue 22 pp. 96-100, 1999 | |
| 316 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of naphthalene Range (0,28 – 200) mg/m3 Range (0,010 – 1,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04098-3:2005 | |
| 317 | Workplace environment - air - air samples collected on sorbent tubes | Ethylene glycol concentration/content Range (0,28 – 400) mg/m3 Range (0,010 – 2,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue 17 pp. 55-59, 1997 | |
| 318 | Workplace environment - air - air samples collected on sorbent tubes | Acetic acid concentration/content Range (0,56 – 1000) mg/m3 Range (0,020 – 5,00) mg in the sample Range (0,23 – 401) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004 | |
| 319 | Workplace environment - air - air samples collected on sorbent tubes | Benzene concentration/content Range (0,05 – 13,89) mg/m3 Range (0,001 – 0,1) mg in the sample Range (0,015 – 4,29) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-10:2005 IN-59 issue 3 of 18.12.2025 | |
| 320 | Workplace environment - air - air samples collected on sorbent tubes | Ethylbenzene concentration/content Range (0,5 – 1800) mg/m3 Range (0,020 – 9) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-93/Z-04231/02 IN-59 issue 3 of 18.12.2025 | |
| 321 | Workplace environment - air - air samples collected on sorbent tubes | Toluene concentration/content Range (0,5 – 2000) mg/m3 Range (0,020 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-93/Z-04231/02 IN-59 issue 3 of 18.12.2025 | |
| 322 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of n-butyl acetate Range (0,6 – 1800) mg/m3 Range (0,020 – 9) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04520:2020-12 IN-59 issue 3 of 18.12.2025 | |
| 323 | Workplace environment - air - air samples collected on sorbent tubes | Butan-1-ol concentration/content Range (0,5 – 1000) mg/m3 Range (0,020 – 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 324 | Workplace environment - air - air samples collected on sorbent tubes | Ethyl acetate concentration/content Range (0,6 – 6000) mg/m3 Range (0,020 – 9) mg in the sample Range (0,16 – 493) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 325 | Workplace environment - air - air samples collected on sorbent tubes | Xylene concentration/content - mixture isomers 1,2-; 1,3-; 1,4- Range (0,6 – 2000) mg/m3 Range (0,020 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 326 | Workplace environment - air - air samples collected on sorbent tubes | Acetone concentration and content Range (0,8 – 3600) mg/m3 Range (0,03 – 18) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-93/Z-04231/02 IN-59 issue 3 of 18.12.2025 | |
| 327 | Workplace environment - air - air samples collected on sorbent tubes | Propan-2-ol concentration/content Range (1,0 – 2400) mg/m3 Range (0,04 – 12) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04535:2022-01 IN-59 issue 3 of 18.12.2025 | |
| 328 | Workplace environment - air - air samples collected on sorbent tubes | Hexane concentration/content Range (0,3 – 1000) mg/m3 Range (0,010 – 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID | PN-Z-04136-3:2003 IN-59 issue 3 of 18.12.2025 | |
| 329 | Workplace environment - air - air samples collected on sorbent tubes | Octane concentration/content Range (0,83 – 3600) mg/m3 Range (0,03 – 18) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04166/02 IN-59 issue 3 of 18.12.2025 | |
| 330 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of cumene (isopropylbenzene) Range (0,8 – 2000) mg/m3 Range (0,03 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-98/Z-04016/06 IN-59 issue 3 of 18.12.2025 | |
| 331 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of propylbenzene Range (0,6 – 2000) mg/m3 Range (0,020 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue 51 pp. 141-147, 2007 IN-59 issue 3 of 18.12.2025 | |
| 332 | Workplace environment - air - air samples collected on sorbent tubes | Heptane concentration/content Range (0,84 – 8000) mg/m3 Range (0,03 – 12) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-84/Z-04138/02 IN-59 issue 3 of 18.12.2025 | |
| 333 | Workplace environment - air - air samples collected on sorbent tubes | Ethanol concentration/content Range (1,39 – 4750) mg/m3 Range (0,05 – 23,75) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 334 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of butan-2-one (methyl ethyl ketone) Range (1,4 – 3333) mg/m3 Range (0,05 – 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04449:2014-06 IN-59 issue 3 of 18.12.2025 | |
| 335 | Workplace environment - air - air samples collected on sorbent tubes | Cyclohexane concentration/content Range (1,0 – 5000) mg/m3 Range (0,03 – 7,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue No. 51, pp. 141-147, 2007; IN-59 issue 3 of 18.12.2025 | |
| 336 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-methylpropan-1-ol (isobutanol) Range (0,6 – 524) mg/m3 Range (0,020 – 2,62) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 337 | Workplace environment - air - air samples collected on sorbent tubes | Trichloroethene concentration/content Range (0,6 – 467) mg/m3 Range (0,020 – 2,33) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Medycyna Pracy (Occupational Medicine), issue No. 74 (1), pp. 53-62, 2023; IN-59 issue 3 of 18.12.2025 | |
| 338 | Workplace environment - air - air samples collected on sorbent tubes | Tetrachloroethene concentration/content Range (0,6 – 579) mg/m3 Range (0,020 – 2,90) mg in the sample Range (0,09 – 84,0) ppm |
Gas chromatography with flame ionization detection (GC-FID) | Medycyna Pracy (Occupational Medicine), issue No. 74 (1), pp. 53-62, 2023; IN-59 issue 3 of 18.12.2025 | |
| 339 | Workplace environment - air - air samples collected on sorbent tubes | 4-methylpentan-2-one concentration/content Range (1,1 – 1000) mg/m3 Range (0,04 – 5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04372:2009 IN-59 issue 3 of 18.12.2025 | |
| 340 | Workplace environment - air - air samples collected on sorbent tubes | Cyclohexanone concentration/content Range (0,3 – 240) mg/m3 Range (0,010 – 1,2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04447:2014-06 IN-59 issue 3 of 18.12.2025 | |
| 341 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of trimethylbenzene - mixture of isomers (1,2,3-, 1,2,4- and 1,3,5-) Range (0,6 – 500) mg/m3 Range (0,020 – 2,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 IN-59 issue 3 of 18.12.2025 | |
| 342 | Workplace environment - air - air samples collected on sorbent tubes | White spirit concentration/content Range (8,30 – 5280) mg/m3 Range (0,30 – 7,92) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134/03 IN-59 issue 3 of 18.12.2025 | |
| 343 | Workplace environment - air - air samples collected on sorbent tubes | Extraction naphtha concentration/content Range (16,7 – 4167) mg/m3 Range (0,60 – 6,25) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134/02 IN-59 issue 3 of 18.12.2025 | |
| 344 | Workplace environment - air - air samples collected on sorbent tubes | Kerosene concentration/content Range (2,2 – 1467) mg/m3 Range (0,08 – 2,20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227/02 IN-59 issue 3 of 18.12.2025 | |
| 345 | Workplace environment - air - air samples collected on sorbent tubes | Phenol concentration/content Range (0,12 – 38) mg/m3 Range (0,004 – 0,192) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue 22, 1999; IN-59 issue 3 of 18.12.2025 | |
| 346 | Workplace environment - air - air samples collected on sorbent tubes | Styrene concentration/content Range (0,28 – 320) mg/m3 Range (0,010 – 1,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue No. 51, pp. 141-147, 2007; IN-59 issue 3 of 18.12.2025 | |
| 347 | Workplace environment - air - air samples collected on sorbent tubes | Pentane concentration/content Range (1,67 – 6000) mg/m3 Range (0,06 – 30) mg in the sample |
Gas chromatography with flame ionization detection (GC- FID) | PN-Z-04318:2005 IN-59 issue 3 of 18.12.2025 | |
| 348 | Workplace environment - air - air samples collected on sorbent tubes | 2-Ethoxyethyl acetate concentration/content Range (0,17 – 120) mg/m3 Range (0,006 – 0,6) mg in the sample Range (0,03 – 21,9) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 349 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of diethyl ether Range (2,20 – 1600) mg/m3 Range (0,08 – 8) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04158/02 IN-59 issue 3 of 18.12.2025 | |
| 350 | Workplace environment - air - air samples collected on sorbent tubes | 2-butoxyethanol concentration/content Range (0,56 – 600) mg/m3 Range (0,020 – 3,0) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 351 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-ethoxyethanol Range (0,11 – 80) mg/m3 Range (0,004 – 0,4) mg in the sample Range (0,03 – 21,4) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025 | |
| 352 | Workplace environment - air - air samples collected on sorbent tubes | Methyl methacrylate concentration/content Range (0,56 – 1667) mg/m3 Range (0,020 – 2,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04113/09 IN-59 issue 3 of 18.12.2025 | |
| 353 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-methoxyethanol Range (0,22 – 160) mg/m3 Range (0,008 – 0,8) mg in the sample Range (0,07 – 50,7) ppm |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue 63, pp. 169-175, 2010 IN-59 issue 3 of 18.12.2025 | |
| 354 | Workplace environment - air - air samples collected on sorbent tubes | 2-Methoxyethyl acetate concentration/content Range (0,28 – 200) mg/m3 Range (0,010 – 1,0) mg in the sample Range (0,06 – 40,8) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-88/Z-04184/02 IN-59 issue 3 of 18.12.2025 | |
| 355 | Workplace environment - air - air samples collected on sorbent tubes | 1-methoxypropan-2-ol concentration/content Range (2,50 – 3000) mg/m3 Range (0,09 – 4,5) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04354:2005 IN-59 issue 3 of 18.12.2025 | |
| 356 | Workplace environment - air - air samples collected on sorbent tubes | 2-methoxy-1-methylethyl acetate concentration and content Range (1,67 – 2133) mg/m3 Range (0,06 – 3,2) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04119-10:2008 IN-59 issue 3 of 18.12.2025 | |
| 357 | Workplace environment - air - air samples collected on sorbent tubes | Methyl acetate concentration and content Range (2,78 – 2800) mg/m3 Range (0,10 – 14,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04119/01 IN-59 issue 3 of 18.12.2025 | |
| 358 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of hexane saturated acyclic isomers, except hexane: Range 2,2-dimethylbutane Range (1,39 – 3000) mg/m3 Range (0,05 – 4,50) mg in the sample 2,3-dimethylbutane (1,11 – 3000) mg/m3 (0,04 – 4,50) mg in the sample 2-methylpentane (1,39 – 2667) mg/m3 (0,05 – 4,00) mg in the sample 3-methylpentane (1,11 – 3000) mg/m3 (0,04 – 4,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue 17, pp. 69-73, 1997 IN-59 issue 3 of 18.12.2025 | |
| 359 | Workplace environment - air - air samples collected on sorbent tubes | Vinyl acetate concentration/content Range (0,14 – 90) mg/m3 Range (0,005 – 0,45) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | Principles and Methods of Assessing the Working Environment: issue No. 51, pp. 141-147, 2007; IN-59 issue 3 of 18.12.2025 | |
| 360 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of tetrahydrofuran Range (1,94 – 1400) mg/m3 Range (0,07 – 7,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04481:2017-10 IN-59 issue 3 of 18.12.2025 | |
| 361 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of cyclohexene Range (0,83 – 2333) mg/m3 Range (0,03 – 3,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04163/02 IN-59 issue 3 of 18.12.2025 | |
| 362 | Workplace environment - air - air samples collected on sorbent tubes | sec-Butyl acetate concentration/content Range (2,78 – 2100) mg/m3 Range (0,10 – 10,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04520:2020-12 IN-59 issue 3 of 18.12.2025 | |
| 363 | Workplace environment - air - air samples collected on sorbent tubes | Isobutyl acetate concentration/content Range (1,11 – 3000) mg/m3 Range (0,04 – 4,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04520:2020-12 IN-59 issue 3 of 18.12.2025 | |
| 364 | Workplace environment - air - air samples collected on sorbent tubes | Chlorobenzene concentration/content Range (0,28 – 200) mg/m3 Range (0,010 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04537:2022-03 IN-59 issue 3 of 18.12.2025 | |
| 365 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of cyclohexanol Range (0,14 – 100) mg/m3 Range (0,005 – 0,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04448:2014-06 IN-59 issue 3 of 18.12.2025 | |
| 366 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-(2-methoxyethoxy) ethanol Range (0,56 – 400) mg/m3 Range (0,020 – 2,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04402:2011 IN-59 issue 3 of 18.12.2025 | |
| 367 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 1,4-dichlorobenzene Range (0,56 – 400) mg/m3 Range (0,020 – 2,00) mg in the sample Range (0,09 – 65,6) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04569:2025-06 IN-59 issue 3 of 18.12.2025 | |
| 368 | Workplace environment - air - air samples collected on sorbent tubes | 2-butoxyethyl acetate concentration/content Range (1,11 – 1000) mg/m3 Range (0,04 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04304:2003 IN-59 issue 3 of 18.12.2025 | |
| 369 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of trichlorobenzene - mixture of isomers (1,2,3-, 1,2,4- and 1,3,5-) Range (0,22 – 150) mg/m3 Range (0,008 – 0,75) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04168/02 IN-59 issue 3 of 18.12.2025 | |
| 370 | Workplace environment - air - air samples collected on sorbent tubes | Concentration/content of 2-(2-butoxyethoxy) ethanol Range (0,56 – 500) mg/m3 Range (0,020 – 2,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04399:2011-09 IN-59 issue 3 of 18.12.2025 | |
| 371 | Workplace environment - air - air samples collected on filters | Concentration/content of diesel engine exhaust emissions measured as elemental carbon (EC) Range (0,42 – 83,3) μg/cm2 Range (1,32– 670,0) μg/sample Range (0,0018 – 0,93) mg/m3 |
Thermal-optical method with flame ionization detection (TOA-FID) | Principles and Methods of Assessing the Working Environment 2023, No. 1 (115), pp. 5–25 | |
| 372 | Workplace environment - air - air samples collected on a glass fibre filter and on sorbent tubes | Concentration and content of polycyclic aromatic hydrocarbons Anthracene (0,000056 – 0,0056) mg/m3 Range (0,040 – 4,0) μg in the sample Benzo(a)anthracene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Chrysene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(b)fluoranthene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(k)fluoranthene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(a)pyrene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Dibenzo(a,h)anthracene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(g,h,i)perylene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Indeno (1,2,3-cd)pyrene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Sum of PAH: Anthracene, benzo(a) anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene benzo(g,h,i) perylene, indeno (1,2,3-cd)pyrene (calculated) |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-5:2006 | |
| 373 | General environment - landfill gas samples - biogas samples collected on sorbent tubes | Content of organic compounds silicon: Tetramethylsilane (TMS) Trimethylsilanol (MOH) Hexamethyldisiloxane (L2) Hexamethylcyclotrisiloxane(D3) Octamethyltrisiloxane (L3) Octamethylcyclotetrasiloxane (D4) Decamethyltetrasiloxane (L4) Decamethylcyclopentasiloxane (D5) Dodecamethylcyclohexasiloxane (D6) Range (0,60 – 5000) μg/sample Sum of siloxanes (calculated) |
Gas chromatography with mass spectrometry detection (GC-MS) | PB-139 issue 4 of 06.05.2026 | |
| 374 | Workplace environment - noise | A-weighted equivalent sound level, Maximum A-weighted sound level, Range (30 – 135) dB C-weighted peak sound pressure level Range (35 – 138) dB |
Direct measurement method | PN-EN ISO 9612:2025-11 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | PN-N-01307:1994 | |
| 375 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the working week (calculated) |
PN-EN ISO 9612:2025-11 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | PN-N-01307:1994 | ||
| 376 | Workplace environment - hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,01 – 100) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | |
| 377 | Workplace environment - hand-arm vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the vector sum of the r.m.s. frequency-corrected vibration accelerations determined for three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes or less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015-11 | ||
| 378 | Workplace environment - whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,01 – 50) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 379 | Workplace environment - whole-body vibration | Daily exposure, expressed as the energy-equivalent value for 8 hours of action of the r.m.s. frequency-corrected vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz), Exposure lasting 30 minutes or less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 380 | Workplace environment - indoor electric lighting | Illuminance. Range (5 – 10000) lx |
Direct measurement method | PN-83/E-04040.03 | |
| 381 | Workplace environment - indoor electric lighting | Illuminance uniformity (calculated) | PN-83/E-04040.03 | ||
| 382 | Workplace environment - electric lighting mining plants – underground workings | Illuminance. Range (0,5 – 2000) lx |
Direct measurement method | PN-G-02600:1996 | |
| 383 | Workplace environment - electric lighting mining plants – underground workings | Illuminance uniformity (calculated) | PN-G-02600:1996 | ||
| 384 | Workplace environment - electric lighting mining plants – surface | Illuminance. Range (0,5 – 2000) lx |
Direct measurement method | PN-G-02601:1999 | |
| 385 | Workplace environment - electric lighting mining plants – surface | Illuminance uniformity (calculated) | PN-G-02601:1999 | ||
| 386 | General environment - noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level Range (25 – 135) dB |
Direct measurement method | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023 item 1706) excluding cl. E. II. 1 and cl. F | |
| 387 | General environment - noise from installations, equipment and industrial plants | A-weighted equivalent sound level for the reference time T expressed by the indicators, LAeq,D and LAeq,N (calculated) | Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023 item 1706) excluding cl. E. II. 1 and cl. F | ||
| 388 | Workplace environment - cold microclimate | Air temperature Range (-30 – 10) °C Black globe temperature Range (-30 – 10) °C Air humidity Range (20 – 90) % Air velocity Range (0,15 – 5,0) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 389 | Workplace environment - cold microclimate | IREQmin index, IREQneutral index, twc index (calculated) | PN-EN ISO 11079:2008 | ||
| 390 | Workplace environment - hot microclimate | Air temperature Range (15 – 60) °C Natural wet bulb temperature Range (15 – 60) °C Black globe temperature Range (15 – 80) °C Air velocity Range (0,15 – 5,0) m/s |
Direct measurement method; Direct measurement method | PN-EN ISO 7243:2018-01 | PN-EN ISO 7243:2018-01/ Ap2:2020-04 | |
| 391 | Workplace environment - hot microclimate | WGBT index, WGBTeff index (calculated) | PN-EN ISO 7243:2018-01 | PN-EN ISO 7243:2018-01/ Ap2:2020-04 | ||
| 392 | Workplace environment - moderate microclimate | Air temperature Range (10 – 30) °C Black globe temperature Range (10 – 40) °C Air humidity Range (20 – 90) % Air velocity Range (0,15 – 1,0) m/s |
Direct measurement method | PN-EN ISO 7730:2006 | |
| 393 | Workplace environment - moderate microclimate | PMV index, PPD index (calculated) | PN-EN ISO 7730:2006 | ||
| 394 | Workplace environment - non-laser optical radiation | Effective irradiance UVA, UVB and UVC in the spectral range (220 - 400) nm Range (10-6 – 39,99) W/m2 |
Direct measurement method (method A) | PN-EN 14255-1:2010 | |
| 395 | Workplace environment - non-laser optical radiation | Effective irradiation for UVA, UVB and UVC in the spectral range (220 - 400) nm (calculated) | PN-EN 14255-1:2010 | ||
| 396 | Workplace environment - non-laser optical radiation | Irradiance for UVA in the spectral range (315 - 400) nm Range (10-3 – 3,999 x 103) W/m2 |
Direct measurement method (method M) | PN-EN 14255-1:2010 | |
| 397 | Workplace environment - non-laser optical radiation | Radiant exposure for UVA in the spectral range (315 - 400) nm (calculated) | PN-EN 14255-1:2010 | ||
| 398 | Workplace environment - non-laser optical radiation | Effective irradiance VIS in the spectral range (315 - 700) nm Range (10-6 – 399,9) W/m2 |
Direct measurement method (method O) | PN-EN 14255-2:2010 | |
| 399 | Workplace environment - non-laser optical radiation | Effective radiance VIS in the spectral range (315 - 700) nm (calculated) | PN-T-05687:2002 cl. 2.5.5 | ||
| 400 | Workplace environment - non-laser optical radiation | Irradiance of VIS, IRA and IRB in the spectral range (400 - 2800) nm Range (10 – 3,999 x 103) W/m2 |
Direct measurement method (method X) | PN-EN 14255-2:2010 | |
| 401 | Workplace environment - non-laser optical radiation | Radiant exposure of VIS, IRA, IRB in the spectral range (400 – 2800) nm (calculated) | PN-EN 14255-2:2010 | ||
| 402 | Working environment − electromagnetic field from industrial installations and equipment: - arc welding equipment - resistance welders - industrial magnetisers and demagnetisers - electrolytic installations - NMR spectrometers - dielectric heating equipment - induction heating equipment - industrial microwave furnaces, heaters and dryers - equipment for the production and processing of plastics - electric vehicles - soldering equipment - electrical discharge machines - resistance and arc furnaces - generators and electric motors - inverters | Electric field strength frequency range from 10 Hz up to 500 kHz Range 1,0 V/m – 50 kV/m in the frequency range from 100 kHz up to 3 GHz Range 0,5 V/m – 1000 V/m in the frequency range from 3 GHz up to 60 GHz Range 0,5 V/m – 400 V/m |
Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 403 | Working environment − electromagnetic field from industrial installations and equipment: - arc welding equipment - resistance welders - industrial magnetisers and demagnetisers - electrolytic installations - NMR spectrometers - dielectric heating equipment - induction heating equipment - industrial microwave furnaces, heaters and dryers - equipment for the production and processing of plastics - electric vehicles - soldering equipment - electrical discharge machines - resistance and arc furnaces - generators and electric motors - inverters | Magnetic flux density in the frequency range 0 Hz Range 0,1 mT – 1,2 T in the frequency range from 10 Hz up to 500 kHz Range 0,05 μT – 19 mT |
Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 404 | Working environment − electromagnetic field from industrial installations and equipment: - arc welding equipment - resistance welders - industrial magnetisers and demagnetisers - electrolytic installations - NMR spectrometers - dielectric heating equipment - induction heating equipment - industrial microwave furnaces, heaters and dryers - equipment for the production and processing of plastics - electric vehicles - soldering equipment - electrical discharge machines - resistance and arc furnaces - generators and electric motors - inverters | Magnetic field strength in the frequency range from 200 kHz up to 40 MHz Range (0,010 – 15,0) A/m Range (0,010 – 12,0) A/m |
Direct measurement method - in the frequency range from 40 MHz to 1 GHz; Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 405 | Working environment − electromagnetic field from industrial installations and equipment: - arc welding equipment - resistance welders - industrial magnetisers and demagnetisers - electrolytic installations - NMR spectrometers - dielectric heating equipment - induction heating equipment - industrial microwave furnaces, heaters and dryers - equipment for the production and processing of plastics - electric vehicles - soldering equipment - electrical discharge machines - resistance and arc furnaces - generators and electric motors - inverters | Magnetic field strength in the frequency range 0 Hz from 10 Hz up to 500 kHz from 800 MHz up to 3 GHz (calculated) |
PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | ||
| 406 | Workplace environment − electromagnetic field originating from radiocommunication and anti-theft systems: - handheld radiotelephones, mobile and cordless telephones, short range wireless terminals and devices, body-worn and vehicle-mounted radio stations (radiotelephones) - anti-theft and electronic article surveillance systems | Electric field strength in the frequency range from 200 kHz up to 3 GHz Range 0,5 V/m – 1000 V/m in the frequency range from 3 GHz up to 60 GHz Range 0,5 V/m – 400 V/m |
Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 407 | Workplace environment − electromagnetic field originating from radiocommunication and anti-theft systems: - handheld radiotelephones, mobile and cordless telephones, short range wireless terminals and devices, body-worn and vehicle-mounted radio stations (radiotelephones) - anti-theft and electronic article surveillance systems | Magnetic field strength in the frequency range from 200 kHz up to 40 MHz Range (0,010 – 15,0) A/m Range (0,010 – 12,0) A/m |
Direct measurement method - in the frequency range from 40 MHz to 1 GHz; Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 408 | Workplace environment − electromagnetic field originating from radiocommunication and anti-theft systems: - handheld radiotelephones, mobile and cordless telephones, short range wireless terminals and devices, body-worn and vehicle-mounted radio stations (radiotelephones) - anti-theft and electronic article surveillance systems | Magnetic field strength in the frequency range from 800 MHz up to 3 GHz (calculated) |
PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | ||
| 409 | Workplace environment − electromagnetic field from equipment used in medical technology: - surgical diathermy units - physiotherapy diathermy units - magnetic resonance scanners | Electric field strength frequency range from 10 Hz up to 500 kHz Range 1,0 V/m – 50 kV/m in the frequency range from 100 kHz up to 3 GHz Range 0,5 V/m – 1000 V/m in the frequency range from 3 GHz up to 60 GHz Range 0,5 V/m – 400 V/m |
Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 410 | Workplace environment − electromagnetic field from equipment used in medical technology: - surgical diathermy units - physiotherapy diathermy units - magnetic resonance scanners | Magnetic flux density in the frequency range 0 Hz Range 0,1 mT – 1,2 T in the frequency range from 10 Hz up to 500 kHz Range 0,05 μT – 19 mT |
Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 411 | Workplace environment − electromagnetic field from equipment used in medical technology: - surgical diathermy units - physiotherapy diathermy units - magnetic resonance scanners | Magnetic field strength in the frequency range from 200 kHz up to 40 MHz Range (0,010 – 15,0) A/m Range (0,010 – 12,0) A/m |
Direct measurement method - in the frequency range from 40 MHz to 1 GHz; Direct measurement method | PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | |
| 412 | Workplace environment − electromagnetic field from equipment used in medical technology: - surgical diathermy units - physiotherapy diathermy units - magnetic resonance scanners | Magnetic field strength in the frequency range 0 Hz from 10 Hz up to 500 kHz from 800 MHz up to 3 GHz (calculated) |
PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026 | ||
| 413 | Workplace environment - electromagnetic field from power systems and AC electrical supply installations in the power industry | Electric field strength: in the frequency range from 45 up to 55 Hz Range 100 V/m – 50 kV/m Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | |
| 414 | Workplace environment - electromagnetic field from power systems and AC electrical supply installations in the power industry | Magnetic flux density in the frequency range from 45 up to 55 Hz Range 1 μT – 19 mT Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | |
| 415 | Workplace environment - electromagnetic field from power systems and AC electrical supply installations in the power industry | Magnetic field strength in the frequency range from 45 up to 55 Hz (calculated) Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150 | ||
| 416 | Workplace environment - electromagnetic field in the workspace from equipment for magnetotherapy or magnetotherapy | Electric field strength: in the frequency range from 10 Hz up to 100 kHz Range 1 V/m – 50 kV/m Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 151–180 | |
| 417 | Workplace environment - electromagnetic field in the workspace from equipment for magnetotherapy or magnetotherapy | Magnetic flux density in the frequency range from 10 up to 100 kHz Range 1 μT – 19 mT Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 151–180 | |
| 418 | Workplace environment - electromagnetic field in the workspace from equipment for magnetotherapy or magnetotherapy | Magnetic field strength in the frequency range from 10 up to 100 kHz (calculated) Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 151–180 | ||
| 419 | Workplace environment - electromagnetic field from transmitting devices of radiocommunication systems | Electric field strength: in the frequency range from 200 kHz up to 3 GHz Range (0,5 – 1000) V/m in the frequency range from 3 up to 60 GHz Range (0,5 – 400) V/m Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method | Principles and Methods of Assessing the Working Environment 2017, No. 2 (92), pp. 89–131 | |
| 420 | Workplace environment - electromagnetic field from transmitting devices of radiocommunication systems | Magnetic field strength in the frequency range from 200 kHz up to 40 MHz Range (0,010 – 15,0) A/m Range (0,010 – 12,0) A/m Regulated area: Measurements of the electromagnetic field in the working environment performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the Regulation of the Minister of Family, Labour and Social Policy of 29.06.2016 (consolidated text: Journal of Laws of 2018, item 331). |
Direct measurement method - in the frequency range from 40 MHz to 1 GHz; Direct measurement method | Principles and Methods of Assessing the Working Environment 2017, No. 2 (92), pp. 89–131 | |
| 421 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Radionuclide activity concentration Radionuclide activity concentration 40K Range (2,0 – 4200) Bq/kg |
Gamma-ray spectrometry method | PB-100 issue 9 of 25.11.2024 | |
| 422 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Concentration of mean activities radionuclides 210Pb, 214Pb, 214Bi Range (4,5 – 850) Bq/kg |
Gamma-ray spectrometry method | PB-100 issue 9 of 25.11.2024 | |
| 423 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Radionuclide activity concentration Radionuclide activity concentration 226Ra (calculated) |
PB-100 issue 9 of 25.11.2024 | ||
| 424 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Concentration of mean activities radionuclides 208Tl, 212Pb, 228Ac Range (3,5 – 320) Bq/kg |
Gamma-ray spectrometry method | PB-100 issue 9 of 25.11.2024 | |
| 425 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Radionuclide activity concentration Radionuclide activity concentration 232Th (calculated) |
PB-100 issue 9 of 25.11.2024 | ||
| 426 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration index I (calculated) | PB-100 issue 9 of 25.11.2024 | ||
| 427 | Water, wastewater, Solid fuels: hard coal, coke, Construction raw materials and materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration of gamma-emitting radionuclides in the energy range: (40 – 2000) keV Range 0,4 Bq/dm3 – 100 kBq/dm3 0,4 Bq/kg – 100 kBq/kg |
Gamma-ray spectrometry method | PB-100 issue 9 of 25.11.2024 | |
| 428 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration of the radionuclide 40K Range (50 – 4100) Bq/kg |
Gamma-ray spectrometry method | ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | |
| 429 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration of radionuclide 214Bi Range (15 – 800) Bq/kg |
Gamma-ray spectrometry method | ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | |
| 430 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration of radionuclide 208Tl Range (10 – 300) Bq/kg |
Gamma-ray spectrometry method | ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | |
| 431 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Radionuclide activity concentration Radionuclide activity concentration 226Ra (calculated) |
ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | ||
| 432 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Radionuclide activity concentration Radionuclide activity concentration 232Th (calculated) |
ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | ||
| 433 | Solid fuels: hard coal, coke, Raw materials and construction materials, Soil, Aggregates, Waste code: 01 01 02, 01 04 12, 01 04 81, 10 01 01, 10 01 02, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 80, 10 01 82, 17 01 01, 17 01 02, 17 02 01, 17 02 02, 17 05 03*, 17 05 04, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 08 05, 19 09 99, 19 12 09 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Activity concentration index I (calculated) | ITB Guide No. 455/2010 | PB-100 issue 9 of 25.11.2024 | ||
| 434 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | pH Range 2,0 – 12,0 Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Potentiometric method | PN-EN ISO 10523:2012 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 435 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Mercury concentration Range (0,00010 – 0,5) mg/l Mercury content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Cold vapour atomic absorption spectrometry (CVAAS) | PN-EN ISO 12846:2012 | PN-EN ISO 12846:2012/Ap1:2016-07 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 436 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Element concentration zinc (0,040 – 1000) mg/l copper (0,010 – 1000) mg/l nickel (0,010 – 1000) mg/l lead (0,010 – 1000) mg/l cadmium (0,002 – 1000 mg/l total chromium (0,010 – 1000) mg/l barium (0,10 – 1000) mg/l iron (0,020 – 1000) mg/l arsenic (0,0020 –1000) mg/l antimony (0,005 – 1000)) mg/l selenium (0,009 – 1000) mg/l molybdenum (0,0010 – 1000) mg/l cobalt (0,006 – 1000) mg/l boron (0,05 – 1000) mg/l tin (0,006 – 1000) mg/l titanium (0,008 – 1000) mg/l thallium (0,07 – 1000) mg/l lithium (0,004 – 1000) mg/l sodium (4,0 – 55000) mg/l potassium (0,90 – 5000) mg/l Element content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 437 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Element concentration arsenic (0,0020 – 1000) mg/l antimony (0,005 – 1000)) mg/l selenium (0,009 – 1000) mg/l tin (0,006 – 1000) mg/l Element content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PN-EN ISO 11885:2009 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 438 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Sulfate concentration Range (10 – 10000) mg/l Sulphate content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Spectrophotometric method | PB-07 issue 7 of 29.12.2023 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 439 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Chloride concentration Range (3,00 – 1000) mg/l Chloride content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Titrimetric method | PN-ISO 9297:1994 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 440 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Phenol index (volatile phenols) Range (0,002 – 1,0) mg/l Phenol index in mg/kg (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Spectrophotometric method | PN-ISO 6439:1994 method B | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 441 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Fluoride concentration Range (0,10 – 1000) mg/l Fluoride content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Potentiometric method | PN-78/C-04588/03 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 442 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Concentration of solid compounds dissolved (dissolved solids) TDS Range (10 – 500000) mg/l Total dissolved solids content (dissolved solids) TDS (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Gravimetric method | PN-EN 15216:2022-03 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 443 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Chemical oxygen demand - COD-Cr Range (15 – 25000) mg/l O2 COD in mg/kg O2 (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Spectrophotometric method | PN-ISO 15705:2005 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 444 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Sulphide and hydrogen sulphide concentration Range (0,010 – 100) mg/l Sulphide and hydrogen sulphide content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Spectrophotometric method | PB-103 issue 6 of 20.02.2026 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 445 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Dissolved organic carbon (DOC) concentration Range (1,50 – 2000) mg/l Dissolved organic carbon (DOC) content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
High-temperature combustion with IR detection | PN-EN 1484:1999 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-EN ISO 20236:2025-05 | |
| 446 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total alkalinity (Acid neutralizing capacity ANC) Range (0,40 – 50) mmol/l Range (20,0 – 2500) mg/l CaCO3 Total alkalinity (Acid neutralisation capacity ANC) in mg/kg (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Titrimetric method | PN-EN ISO 9963-1:2001 cl. 8.2 | PN-EN ISO 9963-1:2001/Ap1:2004 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 P N -G-11011:1998 | |
| 447 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Anion concentrations Nitrates (0,10 – 5000) mg/l Nitrites (0,10 – 1000) mg/l Chlorides (1,00 – 100 000) mg/l Phosphates (0,20 – 1000) mg/l Fluorides (0,10 – 1000) mg/l Sulfates (1,00 – 10 000) mg/l Anion content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Ion chromatography with conductometric detection (IC-CD) | PN-EN ISO 10304-1:2009+AC:2012 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 448 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Ammonium nitrogen concentration Range (0,05 – 1000) mg/l Ammonium nitrogen content (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Spectrophotometric method | PN-ISO 7150-1:2002 | PN-EN 12457-1:2006 | PN-EN 12457-4:2006 | PN-93/G-11010 | PN-G-11011:1998 | |
| 449 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Total carbon content (TC) Range (5 – 950) g/kg Total inorganic carbon content (TIC) Range (5 – 250) g/kg Total organic carbon content (TOC) (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
High-temperature combustion with IR detection; Infrared spectrometry (IR) | PN-EN 13137:2004 | |
| 450 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Element content silicon (100 – 500000) mg/kg aluminium (500 – 500000) mg/kg iron (500 – 500000) mg/kg calcium (500 – 700000) mg/kg magnesium (500 – 600000) mg/kg titanium (4,0 – 200000) mg/kg manganese (4 – 200000) mg/kg sodium (1000 – 500000) mg/kg potassium (500 – 500000) mg/kg strontium (4 – 100000) mg/kg barium (4 – 900000) mg/kg silver (4 – 100000) mg/kg zinc (4 – 100000) mg/kg cadmium (4 – 100000) mg/kg cobalt (4 – 100000) mg/kg chromium (4 – 100000) mg/kg copper (4 – 100000) mg/kg nickel (4 – 100000) mg/kg lead (4 – 100000) mg/kg vanadium (4 – 100000) mg/kg tin (4 – 100000) mg/kg molybdenum (4 – 100000) mg/kg arsenic (4 – 100000) mg/kg antimony (4 – 100000) mg/kg phosphorus (50 – 400000) mg/kg rubidium (50 – 100000) mg/kg beryllium (4 – 100000) mg/kg sulfur (200 – 120000) mg/kg Content of element oxides (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Inductively coupled plasma optical emission spectrometry (ICP-OES) | PB-31 issue 8 of 27.12.2023 | |
| 451 | WasteDAB-11: Mineral sludges and waste (I), Construction waste (III), Slags, ashes and furnace dusts (XI), Paper and cardboard (XXIV), Plastics (XXV), Wood (XXVI), Other municipal waste and waste derived from municipal waste, including mixed waste, and other waste from wastewater treatment and water conditioning (XXVIII) DAB-11) Waste codes according to the Regulation of the Minister of Climate on the waste catalogue for the validation group are given in Annex No. 1 to DAB-11. | Element content arsenic (4 – 100000) mg/kg antimony (4 – 100000) mg/kg tin (4 – 100000) mg/kg Content of element oxides (calculated) Regulated area: Tests performed for the purposes of the regulated area covered by: - Regulation of the Minister of the Environment of 30 April 2013 on landfills (consolidated text: Journal of Laws 2022, item 1902) - Regulation of the Minister of Economy of 16 July 2015 on the admission of waste to landfills (Journal of Laws of 2015, item 1277) - Regulation of the Minister of the Environment of 29 May 2014 on the monitoring of extractive waste disposal facilities (Journal of Laws 2014, item 875) |
Hydride generation inductively coupled plasma optical emission spectrometry (HG-ICP-OES) | PB-31 issue 8 of 27.12.2023 | |
| 452 | Waste gas dedusting equipment | Dust concentration Range (0,0005 – 100) g/m3 |
Gravimetric method | PN-M-34129:1987 Method A | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | |
| 453 | Waste gas dedusting equipment | Dust removal efficiency (calculated) | PN-M-34129:1987 Method A | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 454 | Waste gases | Sampling for the determination of PM 10, PM 2,5 dust concentration | PN-EN ISO 23210:2010 | ||
| 455 | Waste gases | PM 10, PM 2,5 dust concentration PM 10 (0,8 – 40) mg/m3 PM 2,5 (0,4 – 40) mg/m3 |
Gravimetric method | PN-EN ISO 23210:2010 | |
| 456 | Waste gases | Emission of PM 10, PM 2,5 dust (calculated) | PN-EN ISO 23210:2010 | ||
| 457 | Waste gases | Dust sampling for particle size analysis | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 458 | Waste gases | Emission of dust fractions including PM 2,5 and PM10 (calculated) | PN-Z-04030-7:1994 | PN-EN 13284-1:2018-02 | ||
| 459 | Waste gases | Dust emission from the wet coke quenching process, Non-isokinetic Mohrhauer method | PB-135 issue 4 of 16.05.2022 | ||
| 460 | Waste gases | Sampling for the determination of the concentration of hydrogen sulphide, hydrogen cyanide, SO3 and H2SO4, phenol and cresols | Aspiration method using absorbing solutions | PB-128 issue 12 of 29.04.2026 | |
| 461 | Waste gases | Emission of hydrogen sulphide, hydrogen cyanide, SO3 and H2SO4, phenol and cresols (calculated) | PB-128 issue 12 of 29.04.2026 | ||
| 462 | Waste gases | Sampling for determination of ammonia concentration | Aspiration method using absorbing solutions | PN-EN ISO 21877:2020-03 | |
| 463 | Waste gases | Ammonia emission (calculated) | PN-EN ISO 21877:2020-03 | ||
| 464 | Waste gases | Sampling for determination of soot concentration | Aspiration method | PB-53 issue 2 of 14.01.2019 | |
| 465 | Waste gases | Emission of soot (calculated) | PB-53 issue 2 of 14.01.2019 | ||
| 466 | Waste gases | Sampling for the determination of PAH concentration | ISO 11338-1:2003 Method B | ||
| 467 | Waste gases | PAH emission (calculated) | ISO 11338-1:2003 | ||
| 468 | Waste gases | Sampling for the determination of the concentration of metals: Al, Fe, Tl, Zn, Sn, Se | PN-EN 14385:2025-06 | ||
| 469 | Waste gases | Emission of Al, Fe, Tl, Zn, Sn, Se (calculated) | PN-EN 14385:2025-06 | ||
| 470 | Waste gases | Sampling for determination of concentrations of organic compounds | Aspiration method using Tedlar bags | PB-13 issue 1 of 18.12.2025 | |
| 471 | Waste gases | Emission of organic compounds (calculated) | PB-13 issue 1 of 18.12.2025 | ||
| 472 | Automated Measuring Systems (AMS) | AMS calibration (QAL2) for ammonia | PN-EN 14181:2015-02 | ||
| 473 | Automated Measuring Systems (AMS) | Annual surveillance test (AST) for ammonia | PN-EN 14181:2015-02 | ||
| 474 | Automated Measuring Systems (AMS) | Ammonia concentration Range (0,07 – 100) mg/m3 |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 475 | Waste gases | Gas velocity and volume flow rate for differential pressures > 5 Pa Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Differential pressure measurement method | PN-EN ISO 16911-1:2013 | |
| 476 | Waste gases | Gas volume flow rate for dynamic pressures > 10 Pa Velocity Range (1,0 – 30) m/s Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Stagnation pressure method; Thermoanemometric method | PN-Z-04030-7:1994 | |
| 477 | Waste gases | Sampling for determination of dust concentration Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-Z-04030-7:1994 | ||
| 478 | Waste gases | Dust concentration Range (0,001 – 100) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Gravimetric method | PN-Z-04030-7:1994 | |
| 479 | Waste gases | Dust emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-Z-04030-7:1994 | ||
| 480 | Waste gases | Sampling for determination of dust concentration Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13284-1:2018-02 | ||
| 481 | Waste gases | Dust concentration Range (0,0005 – 0,050) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Gravimetric method | PN-EN 13284-1:2018-02 | |
| 482 | Waste gases | Dust emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13284-1:2018-02 | ||
| 483 | Waste gases | Carbon dioxide, sulfur dioxide concentration CO2 (0,2 – 18,8) % SO2 (5 – 2860) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Non-dispersive infrared absorption method NDIR | PN-ISO 10396:2001 | |
| 484 | Waste gases | CO2, SO2 emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-ISO 10396:2001 | ||
| 485 | Waste gases | Oxygen concentration Range (2,0 – 21,0) % Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Paramagnetic method | PN-EN 14789:2017-04 | PN-ISO 10396:2001 | |
| 486 | Waste gases | Carbon monoxide concentration Range (4 – 1250) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Non-dispersive infrared spectrometry NDIR | PN-EN 15058:2017-04 | PN-ISO 10396:2001 | |
| 487 | Waste gases | Carbon monoxide emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 15058:2017-04 | PN-ISO 10396:2001 | ||
| 488 | Waste gases | Concentration of nitrogen monoxide, nitrogen oxides NO (3 – 1340) mg/m3 NOx (4 – 2050) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Chemiluminescence method | PN-EN 14792:2017-04 | PN-ISO 10396:2001 | |
| 489 | Waste gases | Emission of NO, NOx (NO+NO2 calculated as NO2) (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14792:2017-04 | PN-ISO 10396:2001 | ||
| 490 | Waste gases | Sampling for determination of total mercury concentration Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13211:2006+AC:2006 | ||
| 491 | Waste gases | Total mercury emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13211:2006+AC:2006 | ||
| 492 | Waste gases | Sampling for determination of metal concentrations: As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl, V Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14385:2025-06 | ||
| 493 | Waste gases | Emission of Cr, Cd, Co, Mn, Cu, Ni, Pb, As, Sb, Tl, V (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14385:2025-06 | ||
| 494 | Waste gases | Relative humidity Range (4 – 30) % Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Condensation-adsorption method | PN-EN 14790:2017-04 | |
| 495 | Waste gases | Sampling for determination of SO2 concentration Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14791:2017-04 | ||
| 496 | Waste gases | SO2 emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14791:2017-04 | ||
| 497 | Waste gases | Sampling for the determination of hydrogen chloride Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 1911:2011 | ||
| 498 | Waste gases | Hydrogen chloride emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 1911:2011 | ||
| 499 | Waste gases | Sampling for determination of hydrogen fluoride concentration Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Aspiration method using absorbing solutions | ISO 15713:2006 | |
| 500 | Waste gases | Hydrogen fluoride emission (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
ISO 15713:2006 | ||
| 501 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13649:2005 | ||
| 502 | Waste gases | Emission of individual gaseous organic compounds (calculated) Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 13649:2005 | ||
| 503 | Automated Measuring Systems (AMS) | AMS calibration (QAL2) for: dust, CO, SO2, NOX, O2, H2O Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14181:2015-02 | ||
| 504 | Automated Measuring Systems (AMS) | Annual surveillance test (AST) for: dust, CO, SO2, NOX, O2, H2O Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
PN-EN 14181:2015-02 | ||
| 505 | Automated Measuring Systems (AMS) | Dust concentration Range (0,001 – 100) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Gravimetric method | PN-Z-04030-7:1994 | |
| 506 | Automated Measuring Systems (AMS) | Dust concentration Range (0,0005 – 0,050) g/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Gravimetric method | PN-EN 13284-1:2018-02 | |
| 507 | Automated Measuring Systems (AMS) | CO concentration Range (4 – 1250) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Non-dispersive infrared spectrometry (NDIR) | PN-EN 15058:2017-04 | |
| 508 | Automated Measuring Systems (AMS) | SO2 concentration Range (0,5 – 2000) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Ion chromatography (IC) | PN-EN 14791:2017-04 | |
| 509 | Automated Measuring Systems (AMS) | NO, NO2, NOx concentration NO (3 – 1340) mg/m3 NO2 (4 – 2050) mg/m3 NOx (4 – 2050) mg/m3 Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Chemiluminescence method | PN-EN 14792:2017-04 | |
| 510 | Automated Measuring Systems (AMS) | O2 concentration Range (3,0 – 21,0) % Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Paramagnetic method | PN-EN 14789:2017-04 | |
| 511 | Automated Measuring Systems (AMS) | Relative humidity Range (4 – 30) % Regulated area: Periodic measurements of emissions to air from stationary sources performed for the purposes of the regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of the implementing acts to the Act of 27 April 2001 – Environmental Protection Law (Journal of Laws of 2021, item 1973, as amended) |
Condensation-adsorption method | PN-EN 14790:2017-04 | |
| Mine Gases and Dust Testing Laboratories Team - ZPTG | |||||
| 512 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Concentration of components oxygen (0,10 – 21,00) % carbon dioxide (0,06 – 40,00) % carbon monoxide (0,0050 – 20,00) % methane (0,004 – 99,00) % ethane (0,005 – 10,00) % ethylene (0,005 – 0,600) % hydrogen 1,00 ppm – 70,00 % hydrogen sulfide (0,0020 – 0,3000) % |
Gas chromatography with thermal conductivity detection (GC-TCD) | PB-19 issue 16 of 06.03.2025 □ | The laboratory issues opinions and interpretations, included in test reports, formulated on the basis of results of tests performed with the methods marked in column 3 with the symbol □ | |
| 513 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Concentration of components carbon monoxide 1 ppm – 20,00 % ethane 0,010 ppm – 10,00 % ethylene 0,010 ppm – 3,000 % propane 0,010 ppm – 2,00 % propylene 0,010 ppm – 0,750 % carbon dioxide (0,05 – 40,00) % methane (0,001 – 99,00) % acetylene (0,001 – 50,000) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PB-19 issue 16 of 06.03.2025 □ | The laboratory issues opinions and interpretations, included in test reports, formulated on the basis of results of tests performed with the methods marked in column 3 with the symbol □ | |
| 514 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Nitrogen concentration (calculated) | PB-19 issue 16 of 06.03.2025 □ | The laboratory issues opinions and interpretations, included in test reports, formulated on the basis of results of tests performed with the methods marked in column 3 with the symbol □ | ||
| 515 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Carbon monoxide concentration Range (0,0002 – 0,0900) % |
Conductometric method | PB-09 issue 1 of 29.12.2023 | |
| 516 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Net calorific value, gross calorific value, density, relative density, Wobbe index (calculated) | PN-EN ISO 6976:2016-11 | ||
| 517 | Samples of gaseous fuels: - surplus gas, - coke oven gas, - fuel gas, - mine gas, - biogas, Samples of technical gases, Air: - air samples, - mine gas samples, Samples of mine gas from hard coal | Carbon dioxide emission factor (calculated), Total elemental carbon content (calculated) | PB-34 issue 12 of 06.03.2025 | ||
| 518 | Hard coal seams - drill cuttings - lump sample of hard coal | Methane content (calculated) | PB-35 issue 6 of 20.12.2022 | ||
| Inspection Body - Samplers Team | |||||
| 519 | Waste code: 01 04 12, 01 04 81, 03 03 01, 07 02 13, 10 01 01, 10 01 80, 17 01 02, 17 02 01, 17 02 04, 17 02 03, 17 05 04, 19 01 12, 20 01 39, 20 01 99 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Sampling for chemical and physical testing | PB-21 issue 6 of 12.12.2025 | ||
| 520 | Soil | Sampling for chemical and physical testing | PN-ISO 10381-5:2009 | PN-ISO 10381-4:2007 | ||
| 521 | Water | Sampling for testing microbiological Temperature Range (0,0 – 50,0) °C |
PN-EN ISO 19458:2007 excluding cl.; 4.4.2; 4.4.3; 4.4.4.2; 4.4.5; 4.4.6. | PB-44 issue 4 of 14.01.2019 | ||
| 522 | Water | Sampling for chemical and physical testing Temperature Range (0,0 – 50,0) °C |
PN-EN ISO 5667-6:2016-12 excluding 7.5; 7.6; 8.2; 9.4 | PN-ISO 5667-4:2017-10 excluding cl. 13; 15 | PN-ISO 5667-11:2017-10 excluding cl. 5.2; 6.2 | PB-44 issue 4 of 14.01.2019 | ||
| 523 | Water | Free chlorine concentration Range (0,02 – 3,0) mg/l |
Spectrophotometric method | PN-EN ISO 7393-2:2018-04 | |
| 524 | Wastewater | Sampling of wastewater for chemical and physical testing Temperature Range (0,0 – 50,0) °C |
Manual method; Automatic method | PN-ISO 5667-10:2021-11 | PB-44 issue 4 of 14.01.2019 | |
| 525 | Water, wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 526 | Water, wastewater | Electrical conductivity Range 15 μS/cm – 500 mS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 527 | Rainwater, snowmelt water | Sampling of rainwater and snowmelt water for chemical and physical testing Temperature Range (0,0 – 50,0) °C |
Manual method | PN-ISO 5667-10:2021-11 | PB-44 issue 4 of 14.01.2019 | |
| 528 | Rainwater, snowmelt water | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 529 | Solid fuels: hard coal | Sampling for chemical and physical testing | PN-G-04502:2014-11 excluding cl. 5.3.2, 5.3.5 | ||
| 530 | Water intended for human consumption | Sampling for testing microbiological Temperature Range (0,0 – 50,0) °C Regulated area: Sampling and testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
PN-EN ISO 19458:2007 | PB-44 issue 4 of 14.01.2019 | ||
| 531 | Water intended for human consumption | Sampling for chemical and physical testing Temperature Range (0,0 – 50,0) °C Regulated area: Sampling and testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
PN-ISO 5667-5:2017-10 | PB-44 issue 4 of 14.01.2019 | ||
| 532 | Water intended for human consumption | Free chlorine concentration Range (0,02 – 3,0) mg/l Regulated area: Sampling and testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Spectrophotometric method | PN-EN ISO 7393-2:2018-04 | |
| 533 | Water intended for human consumption | pH Range 2,0 – 12,0 Regulated area: Sampling and testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 534 | Water intended for human consumption | Electrical conductivity Range (15 – 5000) μS/cm Regulated area: Sampling and testing of water intended for human consumption performed for the purposes of the legally regulated area. The competence of the laboratory has been confirmed taking into account the applicable requirements of legal acts to the Act of 7 June 2001 on collective water supply and collective wastewater disposal. |
Conductometric method | PN-EN 27888:1999 | |
| TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Dąbrowa Górnicza Branch | |||||
| 535 | Solid fuels: coke | Total moisture content Range (0,1 – 18,0) % |
Gravimetric method | PN-80/G-04511 | PN-ISO 579:2002 | PN-G-04611:2020-06 | |
| 536 | Solid fuels: coke | Moisture content in the analytical sample Range (0,1 – 1,2) % |
Gravimetric method | PN-80/G-04511 | PN-ISO 687:2005 | PN-G-04611:2020-06 | |
| 537 | Solid fuels: coke | Ash content Range (0,7 – 15,0) % |
Gravimetric method | PN-80/G-04512 | PN-80/G-04512/Az1:2002 | PN-ISO 1171:2002 | |
| 538 | Solid fuels: coke | Volatile matter content Range (0,30 – 12,00) % |
Gravimetric method | PN-G-04516:1998 | |
| 539 | Solid fuels: coke | Volatile matter content Range (0,3 – 12,0) % |
Gravimetric method | ISO 562:2024 | |
| 540 | Solid fuels: coke | Total sulfur content Range (0,35 – 0,95) % |
High-temperature combustion with IR detection | PN-G-04584:2001 | ISO 19579:2006 | |
| 541 | Solid fuels: coke | Chlorine content Range (0,04 – 0,15) % |
Titrimetric method | PN-ISO 587:2000 | |
| 542 | Solid fuels: coke | Coke reactivity index (CRI) and coke strength after reaction (CSR) CRI (20,0 – 60,0) % CSR (10,0 – 75,0) % |
Gravimetric method | ISO 18894:2018 | |
| 543 | Solid fuels: coke | Gross calorific value Range (26500 – 35000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-81/G-04513 | PN-ISO 1928:2020-05 | |
| 544 | Solid fuels: coke | Grain composition Fraction (0,5 – 125,0) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-84/C-04310 | |
| 545 | Solid fuels: coke | Grain composition Fraction (5,0 – 125,0) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-ISO 728:1999 | |
| 546 | Solid fuels: coke | Mechanical strength index (M 80, M 40, M 30, M 25, M 20, M 10, I 40, I 20, I 10) M 80 (78,0 – 90,0) % M 40 (68,0 – 93,0) % M 30 (77,0 – 91,0) % M 25 (88,0 – 94,0) % M 20 (88,0 – 95,0) % M 10 (4,0 – 11,0) % I 40 (52,0 – 62,0) % I 20 (71,0 – 81,0) % I 10 (16,0 – 19,0) % |
Gravimetric method | ISO 556:2020 | |
| 547 | Solid fuels: coke | Sampling for chemical and physical testing | PN-C-06301:1998 cl. 2.6.1; 2.6.2 | PN-ISO 18283:2025-07 cl. 5.6.2; 5.6.6 | ||
| 548 | Solid fuels: coke | Phosphorus content Range (0,015 – 0,090) % |
Spectrophotometric method | ISO 622:2025-06 | |
| 549 | Solid fuels: hard coal | Sampling for chemical and physical testing | PN-ISO 18283:2025-07 cl. 5.6.2; 5.6.6 | ||
| 550 | Solid fuels: hard coal | Total moisture content Range (4,0 – 22,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 551 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,3 – 12,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 552 | Solid fuels: hard coal | Ash content Range (3,0 – 35,0) % |
Gravimetric method | PN-80/G-04512 | PN-80/G-04512/Az1:2002 | |
| 553 | Solid fuels: hard coal | Volatile matter content Range (1,50 – 35,00) % |
Gravimetric method | PN-G-04516:1998 | |
| 554 | Solid fuels: hard coal | Total sulfur content Range (0,20 – 4,50)% |
High-temperature combustion with IR detection | PN-G-04584:2001 | |
| 555 | Solid fuels: hard coal | Gross calorific value Range (19000 – 34000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-81/G-04513 | |
| 556 | Solid fuels: hard coal | Grain composition Fraction (0,1 – 11,2) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-C-06304:2001 | |
| 557 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,50 – 5,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 558 | Solid fuels: hard coal | Ash content Range (3,0 – 30,0) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 559 | Solid fuels: hard coal | Volatile matter content Range (16,00 – 35,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 560 | Solid fuels: hard coal | Chlorine content Range (0,03 – 0,24) % |
Titrimetric method | PN ISO 587:2000 | |
| 561 | Solid fuels: hard coal | Phosphorus content Range (0,015 – 0,095) % |
Spectrophotometric method | ISO 622:2025-06 | |
| 562 | Gaseous fuels: coke oven gas, surplus gas | Sampling for chromatographic determinations | PB-127 issue 3 of 14.01.2019 | ||
| 563 | Gaseous fuels: coke oven gas, surplus gas | Concentration of components: hydrogen (1,00 – 65,00) % oxygen (0,10 – 2,00) % nitrogen (1,80 – 85,00) % methane (0,05 – 28,00) % carbon monoxide (2,00 – 20,00) % carbon dioxide (0,50 – 20,00) % ethane (0,09 – 2,50) % ethene (0,10 – 2,50) % propane (0,02 – 0,25) % propene (0,07 – 0,25) % |
Gas chromatography with thermal conductivity detection (GC-TCD) | PB-45 issue 7 of 24.02.2026 | |
| 564 | Gaseous fuels: coke oven gas, surplus gas | Net calorific value, gross calorific value (calculated) | PN-EN ISO 6976:2016-11 | ||
| 565 | Water, wastewater | Ammonium nitrogen concentration Range (1,0 – 777) mg/l |
Titrimetric method | PN-ISO 5664:2002 | |
| 566 | Water, wastewater | Ammonium nitrogen concentration Range (0,05 – 1,0) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 567 | Water, wastewater | Kjeldahl nitrogen concentration Range (2 – 1000) mg/l |
Titrimetric method | PN-EN 25663:2001 | |
| 568 | Water, wastewater | Chemical oxygen demand COD-Cr Range (10 – 20000) mg/l O2 |
Titrimetric method | PB-40 issue 3 of 14.01.2019 | |
| 569 | Water, wastewater | Chemical oxygen demand COD-Cr Range (30 – 5000) mg/l O2 |
Titrimetric method | PN-ISO 6060:2006 | |
| 570 | Water, wastewater | Phenol index (volatile phenols) Range (0,005 – 0,400) mg/l |
Spectrophotometric method | PN-ISO 6439:1994 Method B | |
| 571 | Water, wastewater | Free cyanide concentration Range (0,005 – 50) mg/l |
Spectrophotometric method | PN-80/C-04603/01 | |
| 572 | Water, wastewater | Bound cyanide concentration Range (0,100 – 50) mg/l |
Spectrophotometric method | PN-80/C-04603/01 | |
| 573 | Water, wastewater | Total phosphorus concentration Range (0,100 – 16,0) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 8 | PN-EN ISO 6878:2006/Ap1:2010 | PN-EN ISO 6878:2006/Ap2:2010 | |
| 574 | Water, wastewater | Phosphate concentration Range (0,040 – 200) mg/l P Range (0,12 – 612) mg/l PO4 |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 4 | PN-EN ISO 6878:2006/Ap1:2010 | PN-EN ISO 6878:2006/Ap2:2010 | |
| 575 | Water, wastewater | Total suspended solids (TSS) Range (2,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007 | PN-EN 872:2007/Ap1:2007 | |
| 576 | Water, wastewater | Chloride concentration Range (5 – 20000) mg/l |
Titrimetric method | PB-23 issue 3 of 14.01.2019 | |
| 577 | Water, wastewater | Chloride concentration Range (5 – 10000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 578 | Water, wastewater | Biochemical oxygen demand BOD5 Range (1,0 – 2000) mg/l O2 |
Electrochemical method | PN-EN ISO 5815-1:2019-12 | |
| 579 | Water, wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 580 | Water, wastewater | Electrical conductivity Range (10 – 20000) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 581 | Water, wastewater | Nitrite nitrogen concentration Range (0,02 – 20) mg/l |
Continuous flow analysis (CFA) with spectrophotometric detection | PN-EN ISO 13395:2001 | |
| 582 | Water, wastewater | Nitrate nitrogen concentration Range (0,20 – 100) mg/l |
Continuous flow analysis (CFA) with spectrophotometric detection | PN-EN ISO 13395:2001 | |
| 583 | Water, wastewater | Ammonium nitrogen concentration Range (0,10 – 200) mg/l |
Continuous flow analysis (CFA) with spectrophotometric detection | PN-EN ISO 11732:2007 | |
| 584 | Water, wastewater | Total nitrogen concentration (calculated) | PN-73/C-04576/14 | ||
| 585 | Water, wastewater | Total cyanide concentration Range (0,010 – 50) mg/l |
Continuous flow analysis (CFA) with spectrophotometric detection | PN-EN ISO 14403-2:2012 | |
| 586 | Water, wastewater | Free cyanide concentration Range (0,005 – 50) mg/l |
Continuous flow analysis (CFA) with spectrophotometric detection | PN-EN ISO 14403-2:2012 | |
| 587 | Water, wastewater | Combined cyanide concentration (calculated) | PN-EN ISO 14403-2:2012 | ||
| TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Wałbrzych Branch | |||||
| 588 | Solid fuels: coke | Sampling for chemical and physical testing | PN-ISO 18283:2008 cl. 5.6.1; 5.6.5 | PN-ISO 18283:2008/AC1:2018-03 | ||
| 589 | Solid fuels: coke | Total moisture content Range (0,1 – 25,0) % |
Gravimetric method | PN-ISO 579:2002 | |
| 590 | Solid fuels: coke | Moisture content in the analytical sample Range (0,1 – 1,0) % |
Gravimetric method | PN-ISO 687:2005 | |
| 591 | Solid fuels: coke | Ash content Range (6,5 – 15,0) % |
Gravimetric method | PN-ISO 1171:2002 | |
| 592 | Solid fuels: coke | Volatile matter content Range (0,1 – 5,0) % |
Gravimetric method | ISO 562:2024 | |
| 593 | Solid fuels: coke | Total sulfur content Range (0,30 – 0,90) % |
High-temperature combustion with IR detection | ISO 19579:2006 | |
| 594 | Solid fuels: coke | Grain composition Fraction (10,0 – 250,0) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-ISO 728:1999 | |
| 595 | Solid fuels: coke | Mechanical strength index (M 80, M 40, M 10) M 80 (60,0 – 90,0) % M 40 (70,0 – 90,0) % M 10 (4,0 – 14,0) % |
Gravimetric method | ISO 556:1980 | ISO 556:2020 | |
| 596 | Solid fuels: hard coal | Sampling for chemical and physical testing | PN-ISO 18283:2008 cl. 5.6.1; 5.6.2 | PN-ISO 18283:2008/AC1:2018-03 | ||
| 597 | Gaseous fuels: coke oven gas | Gas sampling for chromatographic determinations | PB-127 issue 3 of 14.01.2019 | ||
| 598 | Gaseous fuels: coke oven gas | Concentration of components: hydrogen (2,00 – 72,00) % oxygen (0,10 – 11,00) % nitrogen (6,40 – 75,00) % methane (0,20 – 70,00) % carbon monoxide (1,50 – 16,00) % carbon dioxide (2,00 – 40,00) % ethane (0,10 – 2,50) % ethene (0,10 – 2,00) % propane (0,01 – 0,50) % propene (0,01 – 0,20) % |
Gas chromatography with thermal conductivity detection (GC-TCD) | PB-45 issue 7 of 24.02.2026 | |
| 599 | Gaseous fuels: coke oven gas | Net calorific value, gross calorific value, density (calculated) | PN-EN ISO 6976:2016-11 | ||
| 600 | Gaseous fuels: coke oven gas | Carbon dioxide emission factor, Total elemental carbon content (calculated) | PB-34 issue 12 of 06.03.2025 | ||
| TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Zabrze Branch | |||||
| 601 | Solid fuels: hard coal | Total moisture content Range (4,0 – 30,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 602 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,3 – 8,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 603 | Solid fuels: hard coal | Ash content Range (3,0 – 40) % |
Gravimetric method | PN-80/G-04512 | PN-80/G-04512/Az1:2002 | |
| 604 | Solid fuels: hard coal | Total sulfur content Range (0,30 – 2,00) % |
High-temperature combustion with IR detection | PN-G-04584:2001 | |
| 605 | Solid fuels: hard coal | Gross calorific value Range (15000 – 35000) kJ/kg Net calorific value (calculated) |
Calorimetric method | PN-81/G-04513 | |
| 606 | Solid fuels: hard coal | Caking ability Range 0 – 90 |
Roga method | PN-81/G-04518 | PN-G-04508:2020-05 | |
| 607 | Solid fuels: hard coal | Volatile matter content Range (15,00 – 35,00) % |
Gravimetric method | PN-G-04516:1998 | |
| 608 | Solid fuels: hard coal | Grain composition Fraction (1,0 – 200,0) mm Range (0,0 – 100,0) % |
Gravimetric method | PN-ISO 1953:1999 | |
| 609 | Solid fuels: coke | Coke reactivity index (CRI) and coke strength after reaction (CSR) CRI (20,0 – 50,0) % CSR (20,0 – 70,0) % |
Gravimetric method | ISO 18894:2018 | |
| 610 | Workplace environment - air | Sampling for the assessment of occupational exposure to: industrial dusts inhalable fraction respirable fraction organic substances inorganic substances inhalable fraction respirable fraction thoracic fraction metals and their compounds, including inhalable fraction respirable fraction |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 611 | Workplace environment - air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 612 | Workplace environment - air | Concentration of dust harmful to health - respirable fraction Apatites and phosphorites Portland cement Natural graphite Amorphous and synthetic silica Organic dusts of animal and plant origin, excluding wood and flour dusts Coal (hard, brown) Range (0,13 – 6,8) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/Ap1:2022-08 | |
| 613 | Workplace environment - air | Concentration of harmful dust agents - inhalable fraction Apatites and phosphorites Portland cement Titanium dioxide Natural graphite Synthetic graphite Kaolin Amorphous and synthetic silica Wood dusts Flour dusts Dusts not classified according to toxicity Organic dusts of animal and plant origin, excluding wood and flour dusts Calcium sulfate (VI) (gypsum) Carbon black Coal (hard, brown) Calcium magnesium carbonate (dolomite) Silicon carbide, non-fibrous Range (0,14 – 13,6) mg/m3 |
Gravimetric method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/Ap1:2022-08 | |
| 614 | Workplace environment - air | Carbon monoxide concentration Range (2,3 – 465) mg/m3 Range (2,0 – 400) ppm |
Electrochemical method | PB-11 issue 1 of 29.07.2025 | |
| 615 | Workplace environment - air - air samples collected into absorbing solutions | Ammonia concentration and content Range (0,75 – 150) mg/m3 Range (0,015 – 3,0) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 616 | Workplace environment - air - air samples collected into absorbing solutions | Hydrogen sulphide concentration and content Range (0,50 – 100,0) mg/m3 Range (0,01 – 2,0) mg in the sample |
Spectrophotometric method | PN-Z-04015-13:1996 | |
| 617 | Workplace environment - air - air samples collected on sorbent tubes | Toluene concentration and content Range (0,5 – 2000) mg/m3 Range (0,020 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-93/Z-04231/02 IN-66 issue 1 of 29.07.2025 | |
| 618 | Workplace environment - air - air samples collected on sorbent tubes | Xylene concentration and content - mixture of isomers 1,2-; 1,3-; 1,4- Range (0,6 – 2000) mg/m3 Range (0,020 – 10) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 IN-66 issue 1 of 29.07.2025 | |
| 619 | Workplace environment - air - air samples collected on sorbent tubes | Naphthalene concentration and content Range (0,28 – 200) mg/m3 Range (0,010 – 1,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04098-3:2005 | |
| 620 | Workplace environment - air - air samples collected on sorbent tubes | Benzene concentration and content Range (0,05 – 13,89) mg/m3 Range (0,001– 0,1) mg in the sample Range (0,015 – 4,29) ppm |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-10:2005 | |
| 621 | Workplace environment - air - air samples collected on sorbent tubes | Pyridine concentration and content Range (0,19 – 100) mg/m3 Range (0,020 – 0,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04375:2009 | |
| 622 | Workplace environment - air - air samples collected on a glass fibre filter and on sorbent tubes | Concentration and content of polycyclic aromatic hydrocarbons Range: Anthracene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(a)anthracene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Chrysene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(b)fluoranthene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(k)fluoranthene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Benzo(a)pyrene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Dibenzo(a,h)anthracene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in sample Benzo(g,h,i)perylene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in the sample Indeno(1,2,3-cd)pyrene (0,000056 – 0,0056) mg/m3 (0,040 – 4,0) μg in sample Sum of PAH: Anthracene, benzo(a) anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene, dibenzo(a,h)anthracene benzo(g,h,i) perylene, indeno (1,2,3-cd)pyrene (calculated) |
High-performance liquid chromatography with fluorescence detection (HPLC-FLD) | PN-Z-04240-5:2006 | |
| 623 | General environment - waste gas samples collected into absorbing solution | Hydrogen sulphide content Range (0,079 – 1,0) mg in the sample |
Spectrophotometric method | PB-12 issue 1 of 29.07.2025 | |
| 624 | Dust samples | Dust fraction content (particle size distribution) including PM 2,5 and PM 10 Range (0 – 100) % |
Laser diffraction method with dispersion in liquid | ISO 13320:2020 | |
| 625 | Soil, Aggregates, Solid fuels: hard coal, lignite, coke, secondary fuel - alternative fuel, solid recovered fuel (SRF), Waste code: 01 01 02, 01 04 12, 01 04 81, 01 04 99, 10 01 01, 10 01 02, 10 01 03, 10 01 14*, 10 01 15, 10 01 16*, 10 01 17, 10 01 24, 10 01 25, 10 01 80, 10 01 82, 10 01 99, 19 01 11*, 19 01 12, 19 01 13*, 19 01 14, 19 01 15*, 19 01 16, 19 01 17*, 19 01 18, 19 01 99, 19 08 14, 19 08 05, 19 09 99, 19 12 04; 19 12 09, 19 12 10, 19 12 12, 20 01 38 O) waste codes according to the Regulation of the Minister of Climate on the waste catalogue. | Particle size distribution Range (0,1 – 2000) μm Range (0 – 100) % |
Laser diffraction method with liquid dispersion | ISO 13320:2020 | |
| 626 | Workplace environment - noise | A-weighted equivalent sound level, Maximum A-weighted sound level, Range (30 – 135) dB C-weighted peak sound pressure level Range (35 – 138) dB |
Direct measurement method | PN-EN ISO 9612:2025-11 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | PN-N-01307:1994 | |
| 627 | Workplace environment - noise | Noise exposure level referred to: an 8-hour daily working time the working week (calculated) |
PN-EN ISO 9612:2025-11 excluding the method covering strategies 2 and 3 – cl. 10 and 11 | PN-N-01307:1994 | ||
| TESTING LABORATORIES TEAM – REGIONAL BRANCHES; Testing Laboratory – Radlin Branch | |||||
| 628 | Solid fuels: hard coal | Total moisture content Range (4,0 – 20,0) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 629 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,5 – 1,1) % |
Gravimetric method | PN-80/G-04511 | PN-G-04611:2020-06 | |
| 630 | Solid fuels: hard coal | Ash content Range (4,0 – 20,0) % |
Gravimetric method | PN-80/G-04512 | PN-80/G-04512/Az1:2002 | |
| 631 | Solid fuels: hard coal | Total sulfur content Range (0,35 – 1,00) % |
High-temperature combustion with IR detection | PN-G-04584:2001 | |
| 632 | Solid fuels: hard coal | Moisture content in the analytical sample Range (0,30 – 1,20) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 633 | Solid fuels: hard coal | Ash content Range (3,00 – 12,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 634 | Solid fuels: hard coal | Volatile matter content Range (20,00 – 35,00) % |
Thermogravimetric method (TGA) | PN-G-04560:1998 | |
| 635 | Solid fuels: hard coal | Expansion pressure Pmax (0,50 – 7,00) kG/cm2 Pmax (50,00 – 700,00) kPa |
Strain gauge method | PB-144 issue 2 of 29.12.2023 | |
| 636 | Solid fuels: coke | Coke reactivity index (CRI) and coke strength after reaction (CSR) CRI (21,0 – 56,0) % CSR (11,0 – 75,0) % |
Gravimetric method | ISO 18894:2018 | |
Reference standards (350)
ASTM D 6349-21
CEN/TS 15414-1:2010
IN-38 issue 7 of 29.12.2023
IN-39 issue 7 of 01.07.2026
IN-39 issue 7 of 01.07.2026 cl. 5.8 and 5.9
ISO 11338-1:2003
ISO 11338-1:2003 Method B
ISO 11338-2:2003
ISO 13320:2020
ISO 15202-3:2004
ISO 15713:2006
ISO 18894:2018
ISO 19579:2006
ISO 29541:2025
ISO 29541:2025 PKN ISO/TS 12902:2007
ISO 349:2020
ISO 556:1980
ISO 556:2020
ISO 562:2024
ISO 622:2025-06
The laboratory issues opinions and interpretations, included in test reports, formulated on the basis of results of tests performed with the methods marked in column 3 with the symbol □
Medycyna Pracy (Occupational Medicine), issue No. 74 (1), pp. 53-62, 2023; IN-59 issue 3 of 18.12.2025
Medycyna Pracy (Occupational Medicine): issue No. 66 (3), pp. 291-301, 2015
NPR-CEN/TS 15370-1:2006
PB-03 issue 6 of 20.12.2022
PB-04 issue 8 of 20.12.2024
PB-05 issue 9 of 07.01.2020
PB-06 issue 8 of 08.02.2023
PB-07 issue 7 of 29.12.2023
PB-09 issue 1 of 29.12.2023
PB-10 issue 6 of 22.12.2023
PB-100 issue 9 of 25.11.2024
PB-102 issue 3 of 14.01.2019
PB-103 issue 6 of 20.02.2026
PB-11 issue 1 of 29.07.2025
PB-12 issue 1 of 29.07.2025
PB-126 issue 4 of 07.01.2020
PB-127 issue 3 of 14.01.2019
PB-128 issue 12 of 29.04.2026
PB-13 issue 1 of 18.12.2025
PB-134 issue 3 of 14.01.2019
PB-135 issue 4 of 16.05.2022
PB-136 issue 4 of 21.01.2021
PB-138 issue 2 of 24.02.2020
PB-139 issue 4 of 06.05.2026
PB-144 issue 2 of 29.12.2023
PB-146 issue 1 of 13.02.2023
PB-19 issue 16 of 06.03.2025 □
PB-21 issue 6 of 12.12.2025
PB-23 issue 3 of 14.01.2019
PB-24 cl. 5.1 issue 7 of 07.01.2019
PB-24 cl. 5.2 issue 7 of 07.01.2019
PB-24 cl. 5.3 issue 7 of 07.01.2019
PB-24 cl. 5.4 issue 7 of 07.01.2019
PB-24 cl. 5.5 issue 7 of 07.01.2019
PB-24 cl. 5.6 issue 7 of 07.01.2019
PB-25 issue 8 of 27.12.2023
PB-26 issue 8 of 27.12.2023
PB-28 issue 5 of 09.01.2019
PB-29 issue 7 of 09.02.2023
PB-31 issue 8 of 27.12.2023
PB-33 issue 3 of 27.12.2023
PB-34 issue 12 of 06.03.2025
PB-35 issue 6 of 20.12.2022
PB-36 issue 6 of 07.01.2020
PB-37 issue 6 of 20.12.2022
PB-39 issue 6 of 06.11.2023
PB-40 issue 3 of 14.01.2019
PB-42 issue 6 of 27.12.2023
PB-44 issue 4 of 14.01.2019
PB-45 issue 7 of 24.02.2026
PB-48 issue 6 of 15.12.2025
PB-49 issue 5 of 07.01.2020
PB-50 issue 4 of 14.01.2019
PB-51 issue 4 of 14.01.2019
PB-53 issue 2 of 14.01.2019
PKN ISO/TS 12902:2007
PKN-CEN ISO/TS 17892-11:2009
PN ISO 14154:2008 IN-172 issue 3 of 18.03.2019
PN ISO 587:2000
PN ISO-587:2000 cl. 7.2.1
PN-71/Z-04041
PN-72/C-04559/03
PN-73/C-04576/14
PN-74/C-04547/01 cl. 2.1
PN-74/C-04547/03
PN-77/C-04604/08
PN-77/G-04528/02
PN-78/C-04588/03
PN-78/Z-04119/01 IN-59 issue 3 of 18.12.2025
PN-80/C-04603/01
PN-80/G-04511
PN-80/G-04512
PN-80/G-04512/Az1:2002
PN-81/G-04513
PN-81/G-04517
PN-81/G-04518
PN-81/Z-04134/02 IN-59 issue 3 of 18.12.2025
PN-81/Z-04134/03 IN-59 issue 3 of 18.12.2025
PN-82/C-04576/08
PN-82/G-04535
PN-82/G-04543
PN-82/G-04544
PN-83/E-04040.03
PN-84/C-04310
PN-84/Z-04138/02 IN-59 issue 3 of 18.12.2025
PN-86/Z-04158/02 IN-59 issue 3 of 18.12.2025
PN-86/Z-04163/02 IN-59 issue 3 of 18.12.2025
PN-86/Z-04166/02 IN-59 issue 3 of 18.12.2025
PN-86/Z-04168/02 IN-59 issue 3 of 18.12.2025
PN-88/B-04481
PN-88/Z-04184/02 IN-59 issue 3 of 18.12.2025
PN-89/Z-04023/02 IN-59 issue 3 of 18.12.2025
PN-89/Z-04023/02 IN-66 issue 1 of 29.07.2025
PN-92/Z-04113/09 IN-59 issue 3 of 18.12.2025
PN-92/Z-04227/02 IN-59 issue 3 of 18.12.2025
PN-93/G-04558
PN-93/G-11010
PN-93/G-11010 P N -G-11011:1998
PN-93/Z-04231/02 IN-59 issue 3 of 18.12.2025
PN-93/Z-04231/02 IN-66 issue 1 of 29.07.2025
PN-93/Z-15008/03
PN-98/Z-04016/06 IN-59 issue 3 of 18.12.2025
PN-C-04576-4:1994
PN-C-06301:1998 cl. 2.6.1; 2.6.2
PN-C-06304:2001
PN-EN 12457-1:2006
PN-EN 12457-4:2006
PN-EN 12673:2004
PN-EN 12673:2004 IN-125 issue 3 of 18.03.2019
PN-EN 12918:2004
PN-EN 13137:2004
PN-EN 13211:2006+AC:2006
PN-EN 13284-1:2018-02
PN-EN 13649:2005
PN-EN 14181:2015-02
PN-EN 14253+A1:2011
PN-EN 14255-1:2010
PN-EN 14255-2:2010
PN-EN 14385:2025-05
PN-EN 14385:2025-06
PN-EN 14789:2017-04
PN-EN 14790:2017-04
PN-EN 14791:2017-04
PN-EN 14792:2017-04
PN-EN 1484:1999
PN-EN 15058:2017-04
PN-EN 15216:2022-03
PN-EN 15408:2011
PN-EN 15935:2022-01
PN-EN 1899-2:2002
PN-EN 1911:2011
PN-EN 25663:2001
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 872:2007
PN-EN 872:2007/Ap1:2007
PN-EN ISO 10301:2002
PN-EN ISO 10304-1:2009+AC:2012
PN-EN ISO 10304-3:2001
PN-EN ISO 10390:2022-09
PN-EN ISO 10523:2012
PN-EN ISO 11079:2008
PN-EN ISO 11732:2007
PN-EN ISO 11885:2009
PN-EN ISO 12846:2012
PN-EN ISO 12846:2012/Ap1:2016-07
PN-EN ISO 13395:2001
PN-EN ISO 14403-2:2012
PN-EN ISO 15586:2005
PN-EN ISO 16703:2011
PN-EN ISO 16911-1:2013
PN-EN ISO 16948:2015-07
PN-EN ISO 16967:2015-06 Method A
PN-EN ISO 16967:2015-06 method B
PN-EN ISO 16968:2015-07
PN-EN ISO 16994:2016-10
PN-EN ISO 17828:2025-09
PN-EN ISO 17829:2016-02
PN-EN ISO 17831-1:2025-10
PN-EN ISO 17892-4:2017-01
PN-EN ISO 17943:2016
PN-EN ISO 17993:2005
PN-EN ISO 17993:2005 IN-58 issue 7 of 20.12.2023
PN-EN ISO 18122:2023-05
PN-EN ISO 18123:2023-10
PN-EN ISO 18125:2017-07
PN-EN ISO 18134-1:2023-02
PN-EN ISO 18134-2:2024-10
PN-EN ISO 18134-3:2023-12
PN-EN ISO 18846:2016-11
PN-EN ISO 19458:2007
PN-EN ISO 19458:2007 excluding cl.; 4.4.2; 4.4.3; 4.4.4.2; 4.4.5; 4.4.6.
PN-EN ISO 20236:2025-05
PN-EN ISO 21644:2021-07 according to Annex B
PN-EN ISO 21654:2021-12
PN-EN ISO 21656:2021-08 excluding cl. 7.3
PN-EN ISO 21660-3:2021-08
PN-EN ISO 21663:2021-06
PN-EN ISO 21877:2020-03
PN-EN ISO 22155:2016-07
PN-EN ISO 22167:2021-08
PN-EN ISO 23210:2010
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015-11
PN-EN ISO 5667-6:2016-12 excluding 7.5; 7.6; 8.2; 9.4
PN-EN ISO 5814:2013-04
PN-EN ISO 5815-1:2019-12
PN-EN ISO 6468:2002
PN-EN ISO 6878:2006
PN-EN ISO 6878:2006 cl. 8
PN-EN ISO 6878:2006 cl. 4
PN-EN ISO 6878:2006 cl. 8
PN-EN ISO 6878:2006/Ap1:2010
PN-EN ISO 6878:2006/Ap2:2010
PN-EN ISO 6976:2016-11
PN-EN ISO 7027-1:2016-09
PN-EN ISO 7243:2018-01
PN-EN ISO 7243:2018-01/ Ap2:2020-04
PN-EN ISO 7393-2:2018-04
PN-EN ISO 7730:2006
PN-EN ISO 7887:2012 Method C
PN-EN ISO 7887:2012/Ap1:2015-06
PN-EN ISO 8467:2001
PN-EN ISO 9377-2:2003
PN-EN ISO 9612:2025-11 excluding the method covering strategies 2 and 3 – cl. 10 and 11
PN-EN ISO 9963-1:2001 cl. 8.2
PN-EN ISO 9963-1:2001 cl. 8.2
PN-EN ISO 9963-1:2001/Ap1:2004
PN-G-02600:1996
PN-G-02601:1999
PN-G-04035:2002+AZ1:2005
PN-G-04502:2014-11 excluding cl. 5.3.2, 5.3.5
PN-G-04508:2020-05
PN-G-04516:1998
PN-G-04537:1998
PN-G-04560:1998
PN-G-04565:1994
PN-G-04571:1998
PN-G-04571:1998 PKN ISO/TS 12902:2007
PN-G-04582:1997 cl. 2.1
PN-G-04582:1997 cl. 2.2.2
PN-G-04584:2001
PN-G-04611:2020-06
PN-G-11011:1998
PN-ISO 10381-4:2007
PN-ISO 10381-5:2009
PN-ISO 10396:2001
PN-ISO 10694:2002
PN-ISO 11047:2001
PN-ISO 11265+AC1:1997
PN-ISO 11423-1:2002
PN-ISO 11464:1999
PN-ISO 11465:1999
PN-ISO 11466:2002
PN-ISO 1171:2002
PN-ISO 11722:2009
PN-ISO 15585:2009
PN-ISO 15705:2005
PN-ISO 16772:2009
PN-ISO 18283:2008 cl. 5.6.1; 5.6.2
PN-ISO 18283:2008 cl. 5.6.1; 5.6.5
PN-ISO 18283:2008/AC1:2018-03
PN-ISO 18283:2025-07 cl. 5.6.2; 5.6.6
PN-ISO 18287:2008
PN-ISO 1928:2020-05
PN-ISO 1953:1999
PN-ISO 20279:2010
PN-ISO 20280:2010
PN-ISO 334:1997
PN-ISO 501:2007
PN-ISO 5074:2002
PN-ISO 540:2001
PN-ISO 5664:2002
PN-ISO 5667-10:2021-11
PN-ISO 5667-11:2017-10 excluding cl. 5.2; 6.2
PN-ISO 5667-4:2017-10 excluding cl. 13; 15
PN-ISO 5667-5:2017-10
PN-ISO 579:2002
PN-ISO 587:2000
PN-ISO 589:2006 Method A1
PN-ISO 6058:1999
PN-ISO 6059:1999
PN-ISO 6060:2006
PN-ISO 6439:1994 Method B
PN-ISO 6439:1994 method B
PN-ISO 6439:1994 Method B
PN-ISO 687:2005
PN-ISO 7150-1:2002
PN-ISO 728:1999
PN-ISO 7404-3:2001
PN-ISO 7404-5:2002
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-M-34129:1987 Method A
PN-N-01307:1994
PN-T-05687:2002 cl. 2.5.5
PN-T-06580-3:2002 Method adapted to the regulated area IN-51 issue 9 of 24.02.2026
PN-Z-04008-7:2002+Az1:2004
PN-Z-04009-11:2008
PN-Z-04015-13:1996
PN-Z-04016-10:2005
PN-Z-04016-10:2005 IN-59 issue 3 of 18.12.2025
PN-Z-04016-4:1998 IN-59 issue 3 of 18.12.2025
PN-Z-04030-7:1994
PN-Z-04098-3:2005
PN-Z-04119-10:2008 IN-59 issue 3 of 18.12.2025
PN-Z-04136-3:2003 IN-59 issue 3 of 18.12.2025
PN-Z-04240-5:2006
PN-Z-04304:2003 IN-59 issue 3 of 18.12.2025
PN-Z-04318:2005 IN-59 issue 3 of 18.12.2025
PN-Z-04323:2004
PN-Z-04354:2005 IN-59 issue 3 of 18.12.2025
PN-Z-04372:2009 IN-59 issue 3 of 18.12.2025
PN-Z-04375:2009
PN-Z-04399:2011-09 IN-59 issue 3 of 18.12.2025
PN-Z-04402:2011 IN-59 issue 3 of 18.12.2025
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04447:2014-06 IN-59 issue 3 of 18.12.2025
PN-Z-04448:2014-06 IN-59 issue 3 of 18.12.2025
PN-Z-04449:2014-06 IN-59 issue 3 of 18.12.2025
PN-Z-04481:2017-10 IN-59 issue 3 of 18.12.2025
PN-Z-04506:2019-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05/Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05/Ap1:2022-08
PN-Z-04520:2020-12 IN-59 issue 3 of 18.12.2025
PN-Z-04535:2022-01 IN-59 issue 3 of 18.12.2025
PN-Z-04537:2022-03 IN-59 issue 3 of 18.12.2025
PN-Z-04569:2025-06 IN-59 issue 3 of 18.12.2025
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 151–180
Principles and Methods of Assessing the Working Environment 2016, No. 4 (90), pp. 91–150
Principles and Methods of Assessing the Working Environment 2017, No. 2 (92), pp. 89–131
Principles and Methods of Assessing the Working Environment 2023, No. 1 (115), pp. 5–25
Principles and Methods of Assessing the Working Environment: issue 1 (71) pp. 97-103, 2012 Principles and Methods of Assessing the Working Environment: issue 2 (92) pp. 5-19, 2017
Principles and Methods of Assessing the Working Environment: issue 17 pp. 55-59, 1997
Principles and Methods of Assessing the Working Environment: issue 17, pp. 69-73, 1997 IN-59 issue 3 of 18.12.2025
Principles and Methods of Assessing the Working Environment: issue 22 pp. 96-100, 1999
Principles and Methods of Assessing the Working Environment: issue No. 4, pp. 117-130, 2012
Principles and Methods of Assessing the Working Environment: issue No. 51, pp. 141-147, 2007; IN-59 issue 3 of 18.12.2025
Principles and Methods of Assessing the Working Environment: issue 63, pp. 169-175, 2010 IN-59 issue 3 of 18.12.2025
Principles and Methods of Assessing the Working Environment: issue 51 pp. 141-147, 2007 IN-59 issue 3 of 18.12.2025
Principles and Methods of Assessing the Working Environment: issue 22, 1999; IN-59 issue 3 of 18.12.2025
ITB Guide No. 455/2010
Annex 7 to the Regulation of the Minister of Climate and Environment of 07.09.2021 (consolidated text Journal of Laws 2023 item 1706) excluding cl. E. II. 1 and cl. F
based on HACH test No. 8051
based on HACH test No. 8131