🇵🇱 ZDT GLIMAG Sp. z o.o. PL
Materials & polymersConstruction
ZDT GLIMAG Sp. z o.o. is a laboratory accredited by PCA under number AB 193 (Mikołów, Poland). Its accreditation scope covers 30 test methods in the following areas: Materials & polymers, Construction. Test objects include: Metals and metal alloys, Metal products - steel for the reinforcement of concrete - welded r…, Pipes, Pressure equipment (pipes, valves). Most frequently used techniques: Method: Tensile test at room temperature, Spark excitation atomic emission spectrometry, Method: Bend test.
At a glance
- Accreditation number: PCA AB 193
- Methods in scope: 30
- Types of test objects: 17
- Techniques used: 20
- City: Mikołów, Poland
- Accreditation number
- AB 193
- Accreditation body
- PCA
- Address
- LABORATORIUM METALOZNAWSTWA I OBRÓBKI CIEPLNEJ, ul. Żwirki i Wigury 6, 43-190 Mikołów
- City
- Mikołów, Poland
What this laboratory tests (17)
- Metals and metal alloys — 6 methods
- Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete — 5 methods
- Pipes — 3 methods
- Pressure equipment (pipes, valves) — 2 methods
- Steel mill products and structural products — 2 methods
- Aluminium and aluminium alloys — 1 method
- Cast iron — 1 method
- Copper and copper alloys — 1 method
- Galvanised steel products — 1 method
- Geosynthetics — 1 method
- Metal products: - reinforcing steel for concrete - prestressing steel — 1 method
- Non-alloy and low-alloy steels — 1 method
- Plastics, Geosynthetics — 1 method
- Products made of metals and metal alloys — 1 method
- Products made of metals and metal alloys with dimensions up to 10000 mm — 1 method
- and 2 more
Analytical techniques used (20)
- Method: Tensile test at room temperature — 4 methods
- Spark excitation atomic emission spectrometry — 4 methods
- Method: Bend test — 2 methods
- Comparative method using a scale of standards; Optical microscopy — 1 method
- Direct measurement method — 1 method
- Gravimetric method — 1 method
- Metallographic method — 1 method
- Method: Bending-back test — 1 method
- Method: Brinell — 1 method
- Method: Charpy impact test — 1 method
- Method: Drift expanding test — 1 method
- Method: Flattening test — 1 method
- Method: hardness measurement — 1 method
- Method: loading with test pressure; Method: water test — 1 method
- Method: Ring expanding test — 1 method
- and 5 more
Laboratory locations
- ZDT GLIMAG Sp. z o.o. (main site) — ul. Żwirki i Wigury 6, 43-190 Mikołów
- METALLOGRAPHY AND HEAT TREATMENT LABORATORY — ul. Żwirki i Wigury 6, 43-190 Mikołów
Certificate information
- Issue date
- 22.09.2026
- Issue no.
- 26
Accreditation scope — test methods (30)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Metallography and Heat Treatment Laboratory | |||||
| 1 | Steel, Cast steel | Content of elements: C, Mn, Si, P, S, Cr, Ni, Cu, Mo, V, Ti, Nb, Al, Pb, B, Co, Sn, W, N C (0,005 – 1,6) % Mn (0,080 – 2,0) % Si (0,010 – 2,7) % P (0,005 – 0,6) % S (0,001 – 0,4) % Cr (0,005 – 30,0) % Ni (0,010 – 36,0) % Cu (0,010 – 3,0) % Mo (0,001 – 6,0) % V (0,0010 – 1,67) % Ti (0,001 – 1,5) % Nb (0,001 – 1,5) % Al (0,005 – 2,0) % Pb (0,01 – 0,05) % B (0,0010 – 0,05) % Co (0,005 – 10,0) % Sn (0,001 – 0,13) % W (0,01 – 17,0) % N (0,007 – 0,12) % |
Spark excitation atomic emission spectrometry | Test procedure No. 07.01.00 issue X 04.04.2025 | |
| 2 | Cast iron | Content of elements: C, Mn, Si, P, S, Cr, Ni, Cu, Mo, V, Ti, Al, Mg, As, B, Ce, Co, Nb, Pb, Sb, Sn, Zr, W C (1,0 – 4,5) % Mn (0,1 – 2,00) % Si (0,1 – 4,5) % P (0,001 – 1,5) % S (0,001 – 0,25) % Cr (0,01 – 33,0) % Ni (0,01 – 39,0) % Cu (0,01 – 3,50) % Mo (0,01 – 4,0) % V (0,001 – 0,3) % Ti (0,010 – 0,20) % Al (0,005 – 0,20) % Mg (0,01 – 0,150) % As (0,0010 – 0,05) % B (0,0010 – 0,05) % Ce (0,004 – 0,050) % Co (0,0015 – 0,110) % Nb (0,005 – 0,070) % Pb (0,003 – 0,030) % Sb (0,005 – 0,150) % Sn (0,004 – 0,15) % Zr (0,004 – 0,040) % W (0,010 – 0,100) % |
Spark excitation atomic emission spectrometry | Test procedure No. 07.01.00 issue X 04.04.2025 | |
| 3 | Aluminium and aluminium alloys | Element content: Cu (0,070 – 0,35) % Mg (0,100 – 2,5) % Si (0,390 – 24,0) % Fe (0,300 – 1,0) % Mn (0,010 – 0,35) % Ni (0,010 – 0,20) % Zn (0,030 – 0,25) % Pb (0,010 – 0,02) % Sn (0,010 – 0,20) % Ti (0,0055 – 0,20) % Cr (0,001 – 0,250) % Zr (0,001 – 0,003) % |
Spark excitation atomic emission spectrometry | Test procedure No. 07.01.00 issue X 04.04.2025 | |
| 4 | Copper and copper alloys | Element content: Mn (0,5 – 1,0) % Si (0,2 – 0,4) % Ni (0,1 – 5,0) % Sn (0,005 – 7,0) % S (0,01 – 0,03) % Ag (0,002 – 0,02) % P (0,01 – 0,03) % Zn (0,03 – 0,5) % Al (9,0 – 11) % Fe (2,5 – 4,5) % Pb (0,005 – 12,0) % Co (0,002 – 0,0005) % |
Spark excitation atomic emission spectrometry | Test procedure No. 07.01.00 issue X 04.04.2025 | |
| 5 | Products made of metals and metal alloys | Susceptibility to plastic deformation - bending bend angle up to 180° |
Method: Bend test | PN-EN ISO 7438:2021-04 | PN-83/H-04411 | |
| 6 | Pipes | Susceptibility to plastic deformation – flattening diameter up to 600 mm thickness not greater than 15 % of the outer diameter |
Method: Flattening test | PN-EN ISO 8492:2014-02 | |
| 7 | Pipes | Susceptibility to plastic deformation – drift expanding with a mandrel external diameter up to 150 mm (100 mm for light metals) wall thickness not more than 10 mm |
Method: Drift expanding test | PN-EN ISO 8493:2005 | |
| 8 | Pipes | Susceptibility to plastic deformation – ring expanding external diameter from 18mm to 150 mm inclusive wall thickness from 2 mm to 16 mm inclusive |
Method: Ring expanding test | PN - EN ISO 8495:2014-02 | |
| 9 | Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete | Mechanical properties: distinct yield strength – Re tensile strength – Rm elongation – A, Agt proof strength, plastic extension – Rp force up to 1000 kN |
Method: Tensile test at room temperature | PN-EN ISO 6892-1:2020-05 Method B | PN-EN ISO 15630-1:2019-04 cl. 5 | PN-EN ISO 15630-2:2019-04 cl. 5 | PN-EN ISO 15630-3:2025-12 cl. 5 | |
| 10 | Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete | Mechanical properties: proof strength, plastic extension – Rp distinct yield strength – Re tensile strength – Rm elongation – A, Agt modulus of elasticity – E force up to 250 kN |
Method: Tensile test at room temperature | PN-EN ISO 6892-1:2020-05 | PN-EN ISO 15630-1:2019-04 cl. 5 | PN-EN ISO 15630-2:2019-04 cl. 5 | PN-EN ISO 15630-3:2025-12 cl. 5 | |
| 11 | Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete | Ability to undergo plastic deformation – bending | Method: Bend test | PN-ISO 6935-2:1998 cl. 8 | PN-ISO 6935-2/Ak:1998 cl. 5 | PN-EN ISO 15630-1:2019-04 cl. 6 | PN-EN ISO 15630-2:2019-04 cl. 6 | PN-EN ISO 15630-3:2025-12 cl. 6 | |
| 12 | Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete | Susceptibility to plastic deformation – back-bending | Method: Bending-back test | PN-ISO 6935-2:1998 cl. 8 | PN-ISO 6935-2/Ak:1998 cl. 5 | PN-EN ISO 15630-1:2019-04 cl. 7 | PN-EN ISO 15630-3:2025-12 cl. 7 | |
| 13 | Metal products - steel for the reinforcement of concrete - welded reinforcing mesh - steel for the prestressing of concrete | Shear of the resistance-welded joint Shear force of the welded joint - Fs force up to 400 kN |
PN-EN ISO 15630-2:2019-04 cl. 7 | ||
| 14 | Galvanised steel products | Mass of the zinc coating | Gravimetric method | PN-EN ISO 1460:2021-03 | PN-EN 10244-2:2023-11 | PN-EN 10244-1:2010 | PN-EN 10346:2015-09 | PN-EN 10152:2017-03 | |
| 15 | Non-alloy and low-alloy steels | Decarburisation depth | Metallographic method | PN-EN ISO 3887:2024-04 | |
| 16 | Steel mill products and structural products | Microstructure phase constituents of the structure |
Optical microscopy method | PN-66/H-04505 | |
| 17 | Steel mill products and structural products | Grain size | Comparative method using a scale of standards; Optical microscopy | PN-EN ISO 643:2025-02 | PN-84/H-04507/01 | |
| 18 | Products made of metals and metal alloys with dimensions up to 10000 mm | Dimensions, diameter, wall thickness, angle | Test procedure 07.06.00 issue 3 of 01.05.2020 | ||
| 19 | Metal products: - reinforcing steel for concrete - prestressing steel | Rib geometry, Relative rib area, Rib inclination angle, Mass per unit length | Test procedure 07.06.00 issue 3 of 01.05.2020 | PN-ISO 6935-2/Ak:1998 cl. 3 | PN-EN ISO 15630-1:2019-04 cl. 10, 11, 12 | PN-EN ISO 15630-3:2025-12 cl. 14, 15, 16 | ||
| 20 | Metals and metal alloys | HBW hardness Range ball diameter: 10 mm - 450 HBW |
Method: Brinell | PN-EN ISO 6506-1:2014-12 | |
| 21 | Metals and metal alloys | HRC hardness Range scale C |
Method: Rockwell | PN-EN ISO 6508-1:2024-06 | |
| 22 | Metals and metal alloys | HV hardness Range HV0,2, HV1, HV5, HV10 |
Method: Vickers | PN-EN ISO 6507-1:2024-04 | |
| 23 | Metals and metal alloys | Measurement of the thickness of the surface-hardened layer | Method: hardness measurement | PN-EN ISO 18203:2022-09 | |
| 24 | Metals and metal alloys | Absorbed energy KV2; KU 2 Test temperature room 23±5 ºC Test temperature reduced to - 20 ºC Initial hammer energy 300 J |
Method: Charpy impact test | PN-EN ISO 148-1:2017-02 | PN-81/H-04373 | |
| 25 | Metals and metal alloys | Mechanical properties: proof strength, plastic extension – Rp distinct yield strength – Re tensile strength – Rm elongation – A, Agt reduction of area – Z modulus of elasticity - E force up to 1000 kN |
Method: Tensile test at room temperature | PN-EN ISO 6892-1:2020-05 | |
| 26 | Plastics, Geosynthetics | Mechanical properties tensile strength yield strength elongation at fracture modulus of elasticity force up to 250 kN |
Method: Tensile test at room temperature | PN EN ISO 527-1:2020-01 | |
| 27 | Geosynthetics | Mass per unit area | Direct measurement method | PN-ISO 9864:1994 | PN-EN 14196:2016-03 | |
| 28 | Structural products and materials | Resistance to static loads Force up to 1000 kN Deformation up to 400 mm Moment up to 400 kNm |
Tensile test and bend test at room temperature | Test procedure 07.03.00 issue 1 of 15.03.2021 | |
| 29 | Pressure equipment (pipes, valves) | Leak tightness test pressure up to 16 MPa |
Method: loading with test pressure; Method: water test | Test procedure No. P.07.08.00 issue I of 10.01.2022 | PN-G-44070:1997 cl. 2.7 and 3.5.5 | PN-EN 10216-2+A1:2020-05 cl. 11.8.1 | |
| 30 | Pressure equipment (pipes, valves) | Resistance to test (burst) pressure pressure up to 16 MPa |
Pressure loading method | Test procedure No. P.07.08.00 issue I of 10.01.2022 | PN-G-44070:1997 cl. 2.6 and 3.5.4 | |
Reference standards (46)
PN - EN ISO 8495:2014-02
PN EN ISO 527-1:2020-01
PN-66/H-04505
PN-81/H-04373
PN-83/H-04411
PN-84/H-04507/01
PN-EN 10152:2017-03
PN-EN 10216-2+A1:2020-05 cl. 11.8.1
PN-EN 10244-1:2010
PN-EN 10244-2:2023-11
PN-EN 10346:2015-09
PN-EN 14196:2016-03
PN-EN ISO 1460:2021-03
PN-EN ISO 148-1:2017-02
PN-EN ISO 15630-1:2019-04 cl. 10, 11, 12
PN-EN ISO 15630-1:2019-04 cl. 5
PN-EN ISO 15630-1:2019-04 cl. 6
PN-EN ISO 15630-1:2019-04 cl. 7
PN-EN ISO 15630-2:2019-04 cl. 5
PN-EN ISO 15630-2:2019-04 cl. 6
PN-EN ISO 15630-2:2019-04 cl. 7
PN-EN ISO 15630-3:2025-12 cl. 14, 15, 16
PN-EN ISO 15630-3:2025-12 cl. 5
PN-EN ISO 15630-3:2025-12 cl. 6
PN-EN ISO 15630-3:2025-12 cl. 7
PN-EN ISO 18203:2022-09
PN-EN ISO 3887:2024-04
PN-EN ISO 643:2025-02
PN-EN ISO 6506-1:2014-12
PN-EN ISO 6507-1:2024-04
PN-EN ISO 6508-1:2024-06
PN-EN ISO 6892-1:2020-05
PN-EN ISO 6892-1:2020-05 Method B
PN-EN ISO 7438:2021-04
PN-EN ISO 8492:2014-02
PN-EN ISO 8493:2005
PN-G-44070:1997 cl. 2.6 and 3.5.4
PN-G-44070:1997 cl. 2.7 and 3.5.5
PN-ISO 6935-2/Ak:1998 cl. 3
PN-ISO 6935-2/Ak:1998 cl. 5
PN-ISO 6935-2:1998 cl. 8
PN-ISO 9864:1994
Test procedure 07.03.00 issue 1 of 15.03.2021
Test procedure No. P.07.08.00 issue I of 10.01.2022
Test procedure 07.06.00 issue 3 of 01.05.2020
Test procedure No. 07.01.00 issue X 04.04.2025