🇵🇱 EKOLOGIS PL
EnvironmentWater & wastewaterMaterials & polymers
EKOLOGIS is a laboratory accredited by PCA under number AB 1144 (Wrocław (działalność techniczna), Poland). Its accreditation scope covers 329 test methods in the following areas: Environment, Water & wastewater, Materials & polymers. Test objects include: Waste gases, Workplace environment − air – air samples collected on solid sorbent, Water, wastewater, Workplace environment − air − air samples collected on filters. Most frequently used techniques: Gas chromatography with flame ionization detection (GC-FID), Flame atomic absorption spectrometry (FAAS), Spectrophotometric method.
At a glance
- Accreditation number: PCA AB 1144
- Methods in scope: 329
- Types of test objects: 38
- Techniques used: 32
- City: Wrocław (działalność techniczna), Poland
- Accreditation number
- AB 1144
- Accreditation body
- PCA
- Address
- Piotr Szymański Spółka Komandytowa, ul. S. Wysłoucha 62, 52-433 Wrocław, ul. M. Skłodowskiej-Curie 55/61, 50-369 Wrocław (działalność techniczna)
- City
- Wrocław (działalność techniczna), Poland
What this laboratory tests (38)
- Waste gases — 122 methods
- Workplace environment − air – air samples collected on solid sorbent — 58 methods
- Water, wastewater — 28 methods
- Workplace environment − air − air samples collected on filters — 20 methods
- Waste gases, S — 9 methods
- Waste gases, Waste gas samples collected on filters — 8 methods
- Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) — 7 methods
- Workplace environment – cold microclimate — 7 methods
- Workplace environment − air — 7 methods
- General environment − - noise from installations, equipment and industrial plants — 6 methods
- Workplace environment – moderate microclimate — 6 methods
- Workplace environment – hot microclimate — 5 methods
- Workplace environment − air – air samples collected into absorbing solution — 5 methods
- Workplace environment − noise — 4 methods
- Concentration/content of lead and its inorganic compounds, except lead (II) arsenate (V) and lead (II) chromate (VI) – expressed as Pb – inhalable fraction, Range: (0,00420 – 0,130) mg/m3 (0,00410 – 0,10) mg in sample, Flame atomic absorption spectrometry (FAAS) — 3 methods
- and 23 more
Analytical techniques used (32)
- Gas chromatography with flame ionization detection (GC-FID) — 41 methods
- Flame atomic absorption spectrometry (FAAS) — 20 methods
- Spectrophotometric method — 17 methods
- Gas chromatography with flame ionization detection (GC-FID) characteristics/method — 14 methods
- Ion chromatography with conductometric detection (IC-CD) — 14 methods
- Direct measurement method — 8 methods
- Gravimetric method — 5 methods
- Manual method — 3 methods
- Paramagnetic method — 3 methods
- Spectrophotometric method characteristics/method — 3 methods
- Aspiration method using absorbing solutions — 2 methods
- Aspiration method using filters — 2 methods
- Electrochemical method — 2 methods
- Flame atomic absorption spectrometry (FAAS) characteristics/method — 2 methods
- High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) — 2 methods
- and 17 more
Laboratory locations
- EKOLOGIS Piotr Szymański Spółka Komandytowa (main site) — ul. S. Wysłoucha 62, 52-433 Wrocław
- Laboratory (technical activity) — ul. M. Skłodowskiej-Curie 55/61, 50-369 Wrocław
Certificate information
- Issue date
- 08.01.2026
- Issue no.
- 26
Accreditation scope — test methods (329)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Test methods | |||||
| 1 | characteristics/method | ||||
| 2 | Workplace environment − noise | A-weighted equivalent sound pressure level | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 (cl. 10) and strategy 3 (cl. 11) | ||
| 3 | Workplace environment − noise | Maximum A-weighted sound pressure level Range (25 – 135) dB |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 (cl. 10) and strategy 3 (cl. 11) | ||
| 4 | Workplace environment − noise | C-weighted peak sound pressure level Range (35 – 138) dB |
Direct measurement method | PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 (cl. 10) and strategy 3 (cl. 11) | |
| 5 | Workplace environment − noise | Noise exposure level referred to: an 8-hour daily working time the average weekly working time (calculated) |
PN-N-01307:1994 | PN-EN ISO 9612:2011 excluding the method covering strategy 2 (cl. 10) and strategy 3 (cl. 11) | ||
| 6 | General environment − - noise from installations, equipment and industrial plants | A-weighted equivalent sound pressure level | Annex No. 7 to the regulation | ||
| 7 | General environment − - noise from installations, equipment and industrial plants | Range (25 – 135 ) dB |
of the Minister of Climate and Environment of | ||
| 8 | General environment − - noise from installations, equipment and industrial plants | Direct measurement method | 07.09.2021 | ||
| 9 | General environment − - noise from installations, equipment and industrial plants | A-weighted equivalent sound level for the reference time T expressed | (consolidated text Journal of Laws 2023 item 1706) | ||
| 10 | General environment − - noise from installations, equipment and industrial plants | by the indicators LAeqD and LAeqN | CNOSSOS-EU | ||
| 11 | General environment − - noise from installations, equipment and industrial plants | (calculated) | (Commission Directive (EU) 2015/996) | ||
| 12 | Calculation method | (calculated) | PN-ISO 9613-2:2002 | ||
| 13 | Workplace environment – hot microclimate | Air temperature Range (15 – 50) °C |
PN-EN ISO 7243:2018-01 | ||
| 14 | Workplace environment – hot microclimate | Natural wet bulb temperature Range (15 – 50) °C |
PN-EN ISO 7243:2018-01 | ||
| 15 | Workplace environment – hot microclimate | Black globe temperature Range (15 – 50) °C |
Direct measurement method | PN-EN ISO 7243:2018-01 | |
| 16 | Workplace environment – hot microclimate | WBGT index | PN-EN ISO 7243:2018-01 | ||
| 17 | Workplace environment – hot microclimate | WBGTeff index (calculated) | PN-EN ISO 7243:2018-01 | ||
| 18 | Workplace environment – cold microclimate | Air temperature Range (-20 – 10) °C |
PN-EN ISO 11079:2008 | ||
| 19 | Workplace environment – cold microclimate | Black globe temperature Range (-20 – 15) °C |
PN-EN ISO 11079:2008 | ||
| 20 | Workplace environment – cold microclimate | Air humidity Range (25 – 75) % |
PN-EN ISO 11079:2008 | ||
| 21 | Workplace environment – cold microclimate | Air velocity Range (0,15 – 5) m/s |
Direct measurement method | PN-EN ISO 11079:2008 | |
| 22 | Workplace environment – cold microclimate | twc index | PN-EN ISO 11079:2008 | ||
| 23 | Workplace environment – cold microclimate | IREQmin index | PN-EN ISO 11079:2008 | ||
| 24 | Workplace environment – cold microclimate | IREQneutral index (calculated) | PN-EN ISO 11079:2008 | ||
| 25 | Workplace environment – moderate microclimate | Air temperature Range (10 – 30) °C |
PN-EN-ISO 7730:2006 + Ap2:2016-04 | ||
| 26 | Workplace environment – moderate microclimate | Black globe temperature Range (10 – 40) °C |
PN-EN-ISO 7730:2006 + Ap2:2016-04 | ||
| 27 | Workplace environment – moderate microclimate | Air humidity Range (25 – 75) % |
PN-EN-ISO 7730:2006 + Ap2:2016-04 | ||
| 28 | Workplace environment – moderate microclimate | Air velocity Range (0,15 – 5,0) m/s |
Direct measurement method | PN-EN-ISO 7730:2006 + Ap2:2016-04 | |
| 29 | Workplace environment – moderate microclimate | PMV index | PN-EN-ISO 7730:2006 + Ap2:2016-04 | ||
| 30 | Workplace environment – moderate microclimate | PPD index (calculated) characteristics/method | PN-EN-ISO 7730:2006 + Ap2:2016-04 | ||
| 31 | Workplace environment – hand-arm vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,320 – 50,2) m/s2 |
Direct measurement method | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015 | |
| 32 | Daily exposure, expressed as the energy-equivalent for 8 hours of the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes and less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | Daily exposure, expressed as the energy-equivalent value for an 8-hour working day of the vector sum of the frequency-weighted r.m.s. vibration accelerations, determined for the three directional components (ahwx, ahwy, ahwz) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015 | ||
| 33 | Daily exposure, expressed as the energy-equivalent for 8 hours of the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz), Exposure lasting 30 minutes and less, expressed as the vector sum of the r.m.s. frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | Exposure lasting 30 minutes and less, expressed as the vector sum of root-mean-square, frequency-weighted vibration accelerations determined for the three directional components (ahwx, ahwy, ahwz) (calculated) | PN-EN ISO 5349-1:2004 | PN-EN ISO 5349-2:2004 | PN-EN ISO 5349-2:2004/A1:2015 | ||
| 34 | Workplace environment – whole-body vibration | Frequency-weighted r.m.s. vibration acceleration Range (0,0316 – 35,5) m/s2 |
Direct measurement method | PN-EN 14253+A1:2011 | |
| 35 | Daily exposure, expressed as the energy-equivalent for 8 hours of the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz), Exposure lasting 30 minutes and less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz) (calculated) | Daily exposure, expressed as the 8-hour energy-equivalent frequency-weighted RMS vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate coefficients (1.4awx, 1.4awy, awz) | PN-EN 14253+A1:2011 | ||
| 36 | Daily exposure, expressed as the energy-equivalent for 8 hours of the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz), Exposure lasting 30 minutes and less, expressed as the r.m.s. frequency-weighted vibration acceleration dominant among the vibration accelerations determined for the three directional components taking into account the appropriate factors (1.4awx, 1.4awy, awz) (calculated) | Exposure lasting 30 minutes or less, expressed as the frequency-weighted r.m.s. vibration acceleration, dominant among the vibration accelerations determined for the three directional components with the appropriate factors applied (1.4awx, 1.4awy, awz) (calculated) | PN-EN 14253+A1:2011 | ||
| 37 | Machinery and equipment | A-weighted equivalent sound pressure level | PN-EN ISO 3746:2011 excluding cl. 8.4 | PN-EN ISO 3746:2011 +Ap1:2017-09 | PN-EN ISO 3746:2011 | ||
| 38 | - noise | Range (25 – 135) dB |
excluding cl. 8.4 | ||
| 39 | - noise | Direct measurement method | PN-EN ISO 3746:2011 | ||
| 40 | Sound power level (calculated) | Sound power level (calculated) characteristics/method | +Ap1:2017-09 | ||
| 41 | Workplace environment − air | Sampling for the assessment of exposure to: dust agents: inhalable fraction, respirable fraction |
Personal dosimetry method | PN-Z-04008-7:2002+Az1:2004 | |
| 42 | Workplace environment − air | Sampling for the assessment of exposure to: organic substances, including: inhalable fraction inorganic substances, including: inhalable fraction respirable fraction thoracic fraction metals and their compounds, including: inhalable fraction respirable fraction man-made mineral fibres, excluding refractory ceramic fibres respirable fibres asbestos respirable fibres silicon carbide, fibrous respirable fibres |
Personal dosimetry method; Stationary method | PN-Z-04008-7:2002+Az1:2004 | |
| 43 | Workplace environment − air | Exposure index (calculated) | PN-Z-04008-7:2002+Az1:2004 | ||
| 44 | Workplace environment − air | Concentration of harmful dust agents - inhalable fraction: – petroleum asphalt – apatites and phosphorites – Portland cement – titanium dioxide – natural graphite – synthetic graphite – kaolin – amorphous and synthetic silica – wood dust – flour dust – dusts not classified according to toxicity – organic dusts of animal and plant origin except wood and flour dust – calcium sulphate (VI) (gypsum) – carbon black – talc – coal (hard, brown) – magnesium calcium carbonate (dolomite) – silicon carbide, non-fibrous silicon carbide, fibrous man-made mineral fibres, excluding refractory ceramic fibres Range (0,07 – 17,0) mg/m3 |
Gravimetric method characteristics/method | PN-Z-04507:2022-05 | PN-Z-04507:2022-05/ Ap1:2022-08 | |
| 45 | Workplace environment − air | Concentration of harmful dust agents - respirable fraction: – apatites and phosphorites – Portland cement – natural graphite – amorphous and synthetic silica – organic dusts of animal and plant origin except wood and flour dust – talc – coal (hard, brown) Range (0,07 – 7,8) mg/m3 |
Gravimetric method | PN-Z-04508:2022-05 | PN-Z-04508:2022-05/ Ap1:2022-08 | |
| 46 | Workplace environment − air | Carbon monoxide concentration | Test procedure PB-01 issue 6 of 27.06.2025 | ||
| 47 | Workplace environment − air | CO - (2,34 – 250) mg/m3 (2,00 – 214) ppm | Electrochemical method | Test procedure PB-01 issue 6 of 27.06.2025 | |
| 48 | Exposure index (calculated) | Exposure index (calculated) | Test procedure PB-01 issue 6 of 27.06.2025 | ||
| 49 | Workplace environment − air – air samples collected on filters | Concentration/content of chromium (VI) compounds – calculated as Cr (VI) Range (0,000370 – 0,110) mg/m3 Range (0,000260 – 0,080) mg in the sample |
Spectrophotometric method | PN-87/Z-04126/03 | |
| 50 | Workplace environment − air – air samples collected into absorbing solution | Formaldehyde concentration/content Range (0,13 – 6,6) mg/m3 Range (0,0010 – 0,040) mg in the sample |
Spectrophotometric method | PN-76/Z-04045/02 | |
| 51 | Workplace environment − air – air samples collected into absorbing solution | Chlorine concentration/content Range (0,063 – 5,0) mg/m3 Range (0,00025 – 0,0050) mg in the sample |
Spectrophotometric method | PN-75/Z-04037/03 | |
| 52 | Workplace environment − air – air samples collected into absorbing solution | Hydrogen sulphide concentration/content Range (0,50 – 21) mg/m3 Range (0,0050 – 0,16) mg in the sample |
Spectrophotometric method characteristics/method | PN-96/Z-04015/13 | |
| 53 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of e e ; e organic compounds: | PN-89/Z-04023/02 | ||
| 54 | Workplace environment − air – air samples collected on solid sorbent | Acetone (0,60 – 2960) mg/m3 (0,0120 – 7,40) mg in the sample butan-1-ol (0,380 – 188) mg/m3 (0,00750 – 0,470) mg in the sample | PN-89/Z-04023/02 | ||
| 55 | Workplace environment − air – air samples collected on solid sorbent | 2-butoxyethanol (0,350 – 320) mg/m3 (0,00700 - 0,800) mg in the sample | PN-89/Z-04023/02 | ||
| 56 | Workplace environment − air – air samples collected on solid sorbent | 2-ethoxyethanol (0,260 – 35) mg/m3 (0,00510 – 0,210) mg in the sample ethanol (0,90 – 6533) mg/m3 (0,0170 – 19,60) mg in the sample xylene (mixture of isomers 1,2-; 1,3- |
PN-89/Z-04023/02 | ||
| 57 | Workplace environment − air – air samples collected on solid sorbent | 1,4-) (0,240 – 1228) mg/m3 (0,00480 – 3,07) mg in the sample | PN-89/Z-04023/02 | ||
| 58 | Workplace environment − air – air samples collected on solid sorbent | 2-methylpropan-1-ol (0,340 – 344) mg/m3 (0,00680 – 0,860) mg in the sample 2-ethoxyethyl acetate (0,280 – 116) mg/m3 (0,050 – 21) ppm (0,00550 – 0,70) mg in the sample n-butyl acetate (0,60 – 1040) mg/m3 (0,0120 – 1,30) mg in the sample ethyl acetate (0,60 – 3760) mg/m3 (0,160 – 1026) ppm (0,0120 – 9,40) mg in the sample toluene (0,250 – 240) mg/m3 (0,00500 – 0,640) mg in the sample | Gas chromatography with flame ionization detection (GC-FID) | PN-89/Z-04023/02 | |
| 59 | Workplace environment − air – air samples collected on solid sorbent | Acrylonitrile concentration/content Range (0,0930 – 27,0) mg/m3 Range (0,0420 – 12) ppm Range (0,00220 – 0,0550) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04556:2024-09 | |
| 60 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of butyl acrylate Range (0,90 – 324) mg/m3 Range (0,00840 – 0,810) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04113/06 | |
| 61 | Workplace environment − air – air samples collected on solid sorbent | Methyl acrylate concentration/content Range (0,530 – 272) mg/m3 Range (0,00530 – 0,680) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04113/05 | |
| 62 | Workplace environment − air – air samples collected on solid sorbent | Benzene concentration/content Range (0,060 – 5,0) mg/m3 Range (0,0180 – 1,50) ppm Range (0,00120 – 0,030) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04016-10:2005 | |
| 63 | Workplace environment − air – air samples collected on solid sorbent | Extraction naphtha concentration/content Range (7,60 – 1500) mg/m3 Range (0,0760 – 3,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134/02 | |
| 64 | Workplace environment − air – air samples collected on solid sorbent | White spirit concentration/content Range (2,70 – 1640) mg/m3 Range (0,0160 – 4,10 ) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-81/Z-04134/03 | |
| 65 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of butan-2-one Range (3,70 – 1560) mg/m3 Range (0,0220 – 3,90) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04449-06:2014 | |
| 66 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 2-(2-butoxyethoxy)ethanol Range (0,500 – 640) mg/m3 Range (0,0150 – 1,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04399:2011 | |
| 67 | Workplace environment − air – air samples collected on solid sorbent | Chlorobenzene concentration/content Range (0,60 – 400) mg/m3 Range (0,00820 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04537:2022-03 | |
| 68 | Workplace environment − air – air samples collected on solid sorbent | Cyclohexane concentration/content Range (3,70 - 1000) mg/m3 Range (0,0370 – 2,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04151/02 | |
| 69 | Workplace environment − air – air samples collected on solid sorbent | Cyclohexanone concentration/content Range (0,90 – 400) mg/m3 Range (0,00860 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04447-06:2014 | |
| 70 | Workplace environment − air – air samples collected on solid sorbent | Dichloromethane concentration/content Range (1,40 – 680) mg/m3 Range (0,40 – 192) ppm Range (0,0140 – 1,70) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-83/Z-04110/02 | |
| 71 | Workplace environment − air – air samples collected on solid sorbent | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-79/Z-04081/01 | |
| 72 | Workplace environment − air – air samples collected on solid sorbent, Ethyltoluene concentration/content – mixture of isomers, Range: (1,90 – 795) mg/m3 (0,0110 – 4,780) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04016-5:1998 | |
| 73 | Concentration/content of ethylene glycol, Range: (0,920 – 520) mg/m3 (0,00550 – 1,30) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-88/Z-04203/02 | |
| 74 | Concentration/content of hexane, Range: (1,60 - 150) mg/m3 (0,0160 – 0,90) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04136-3:2003 | |
| 75 | Concentration/content of hexan-2-one, Range: (0,550 – 200) mg/m3 (0,0110 – 1,20) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04165-3:2001 | |
| 76 | Heptane concentration/content, Range: (1,60 - 2920) mg/m3 (0,0160 – 7,30) mg in sample, Gas chromatography method with flame ionisation detection (GC-FID) | Ethylbenzene concentration/content Range (1,10 – 960) mg/m3 Range (0,0110 – 2,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-84/Z-04138/02 | |
| 77 | Heptane concentration/content, Range: (1,60 - 2920) mg/m3 (0,0160 – 7,30) mg in sample, Gas chromatography method with flame ionisation detection (GC-FID) | Concentration/content of cumene Range (1,90 - 400) mg/m3 Range (0,0110 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04016-6:1998 | |
| 78 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of butyl methacrylate Range (1,40 – 400) mg/m3 Range (0,00810 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04283:2001 | |
| 79 | Workplace environment − air – air samples collected on solid sorbent | Methyl methacrylate concentration/content Range (1,20 – 560) mg/m3 Range (0,0120 – 1,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04113/09 | |
| 80 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 2-methoxyethanol Range (0,280 – 250) mg/m3 Range (0,0880 – 79) ppm Range (0,00700 – 1,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04167/02 | |
| 81 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 2-(2-methoxyethoxy)ethanol Range (1,60 – 266) mg/m3 Range (0,0160 – 1,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04402:2011 | |
| 82 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 1-methoxypropan- | PN-Z-04354:2005 | ||
| 83 | Workplace environment − air – air samples collected on solid sorbent | 2-ol Range (0,70 – 680) mg/m3 Range (0,0140 – 1,70) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04354:2005 | |
| 84 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 2-methylbutane Range (1,40 – 7500) mg/m3 Range (0,00800 – 15,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04376:2010 | |
| 85 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of methylcyclohexane Range (1,70 – 4960) mg/m3 Range (0,0100 – 12,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-84/Z-04137/02 | |
| 86 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 4-methylpentan- | PN-Z-04372:2009 | ||
| 87 | Workplace environment − air – air samples collected on solid sorbent | 2-one Range (1,90 - 400) mg/m3 Range (0,0110 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04372:2009 | |
| 88 | Workplace environment − air – air samples collected on solid sorbent | Kerosene concentration/content Range (3,10 – 300) mg/m3 Range (0,0310 – 0,600) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04227/02 | |
| 89 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of acetate | PN-Z-04304:2003 | ||
| 90 | Workplace environment − air – air samples collected on solid sorbent | 2-butoxyethyl Range (0,80 – 600) mg/m3 Range (0,00470 – 1,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04304:2003 | |
| 91 | Workplace environment − air – air samples collected on solid sorbent | Isobutyl acetate concentration/content Range (1,10 – 1000) mg/m3 Range (0,0110 – 2,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04119-11:2008 | |
| 92 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of isopropyl acetate Range (1,90 – 2000) mg/m3 Range (0,0110 – 5,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN–Z-04119-7:2006 | |
| 93 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of acetate | PN-88/Z-04184/02 | ||
| 94 | Workplace environment − air – air samples collected on solid sorbent | 2-methoxyethyl Range (0,380 – 100) mg/m3 Range (0,0780 – 20) ppm Range (0,00380 – 0,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-88/Z-04184/02 | |
| 95 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 2-methoxyethyl acetate | PN-Z-04119-10:2008 | ||
| 96 | Workplace environment − air – air samples collected on solid sorbent | 1-methylethyl Range (2,00 - 1000) mg/m3 Range (0,0200 – 2,50) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04119-10:2008 | |
| 97 | Workplace environment − air – air samples collected on solid sorbent | Methyl acetate concentration/content Range (0,400 – 1120) mg/m3 Range (0,0120 – 2,80) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-78/Z-04119/01 | |
| 98 | Workplace environment − air – air samples collected on solid sorbent | Vinyl acetate concentration/content Range (0,300 – 200) mg/m3 Range (0,00740 – 0,500) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-87/Z-04178/02 | |
| 99 | Workplace environment − air – air samples collected on solid sorbent | Octane concentration/content Range (3,20 - 1840) mg/m3 Range (0,0190 – 4,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-86/Z–04166/02 | |
| 100 | Workplace environment − air – air samples collected on solid sorbent | Pentane concentration/content Range (2,50 – 7000) mg/m3 Range (0,0150 – 21,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04318:2005 | |
| 101 | Workplace environment − air – air samples collected on solid sorbent | Propan-2-ol concentration/content Range (4,40 – 3280) mg/m3 Range (0,0260 – 8,20) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-92/Z-04224/02 | |
| 102 | Workplace environment − air – air samples collected on solid sorbent | Styrene concentration/content Range (1,20 – 520) mg/m3 Range (0,0120 – 1,30) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-86/Z-04152/02 | |
| 103 | Workplace environment − air – air samples collected on solid sorbent | Tetrachloroethene concentration/content Range (1,70 – 400) mg/m3 Range (0,250 – 58) ppm Range (0,0170 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-83/Z-04118/02 | |
| 104 | Workplace environment − air – air samples collected on solid sorbent | Trichloroethene concentration/content Range (0,340 – 240) mg/m3 Range (0,0100 – 0,60) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-83/Z-04047/03 | |
| 105 | Workplace environment − air – air samples collected on solid sorbent | Trimethylbenzene concentration/content (mixture of isomers 1,2,3-; 1,2,4-; |
PN-Z-04016-4:1998 | ||
| 106 | Workplace environment − air – air samples collected on solid sorbent | 1,3,5-) Range (5,50 – 1200) mg/m3 Range (0,0320 – 3,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 | |
| 107 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 1,2,3-trimethylbenzene Range (1,90 – 400) mg/m3 Range (0,0110 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 | |
| 108 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 1,2,4-trimethylbenzene Range (1,90 – 400) mg/m3 Range (0,0110 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04016-4:1998 | |
| 109 | Workplace environment − air – air samples collected on solid sorbent | Concentration/content of 1,3,5-trimethylbenzene Range (1,70 – 400) mg/m3 Range (0,0100 – 1,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-Z-04016-4:1998 | |
| 110 | Workplace environment − air – air samples collected on solid sorbent | Methanol concentration/content Range (10,0 – 3700) mg/m3 Range (0,05 – 2,75) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04476:2016-10 | |
| 111 | Workplace environment − air – air samples collected on solid sorbent | Acetic acid concentration/content Range (0,60 – 155) mg/m3 Range (0,240 – 62) ppm Range (0,0290 – 1,40) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004-07 | |
| 112 | Workplace environment − air – air samples collected on solid sorbent | Phenol concentration/content Range (0,520 – 1030) mg/m3 Range (0,00260 – 1,030) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04323:2004-07 | |
| 113 | Workplace environment − air – air samples collected on solid sorbent | Nitrogen monoxide concentration/content Range (0,160 – 7,20) mg/m3 Range (0,130 – 5,70) ppm Range (0,00140 – 0,0650) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | OSHA ID-190, 05.1991 | |
| 114 | Workplace environment − air – air samples collected on solid sorbent | Nitrogen dioxide concentration/content Range (0,0210 – 33,0) mg/m3 Range (0,0110 – 17,0) ppm Range (0,00060 – 0,10) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | OSHA ID-182, 05.1991 | |
| 115 | Workplace environment − air – air samples collected on solid sorbent | Hydrogen sulphide concentration/content Range (0,50 – 35,40) mg/m3 Range (0,0180 – 1,060) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | NIOSH 6013 Method, Issue 1, 15 August 1994 | |
| 116 | Workplace environment − air – air samples collected on solid sorbent | Formaldehyde concentration/content Range (0,0160 – 4,660) mg/m3 Range (0,0001940 – 0,00580) mg in sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100 | |
| 117 | Workplace environment − air – air samples collected on filters | Concentration/content of highly refined mineral oils excluding metalworking fluids – inhalable fraction Range (0,28 – 18) mg/m3 Range (0,20 – 13) mg in the sample |
Infrared spectrometry method | PN-Z-04108-5:2006 | |
| 118 | Workplace environment − air – air samples collected on filters | Concentration/content of crystalline silica (quartz, cristobalite) – respirable fraction Range (0,01 – 0,58) mg/m3 Range (0,0050 – 0,40) mg in the sample |
Infrared spectrometry method (IR) characteristics/method | PN-Z-04108-5:2006 | |
| 119 | Workplace environment − air − air samples collected on filters | Concentration/content of manganese and its inorganic compounds – expressed as Mn inhalable fraction Range (0,0043 – 0,430) mg/m3 Range (0,0031 – 0,310) mg in the sample respirable fraction Range (0,0046 – 0,450) mg/m3 Range (0,0031 – 0,310) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04472:2015-10 | PN-Z-04472:2015-10/Ap1:2015-12 | |
| 120 | Workplace environment − air − air samples collected on filters | Concentration/Content of iron oxides – calculated as Fe iron (III) oxide, iron (II) oxide, triiron tetraoxide inhalable fraction Range (0,0370 – 25,30) mg/m3 Range (0,0260 – 15) mg in the sample respirable fraction Range (0,0390 – 26,60) mg/m3 Range (0,0260 – 15) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04469:2025-02 | |
| 121 | Workplace environment − air − air samples collected on filters | Concentration/content of metallic chromium o, chromium compounds: (chromium (II), chromium (III ), chromium (VI)) – expressed as Cr Range (0,0370 - 1,80) mg/m3 Range (0,0270 - 1,30) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04434:2011 | |
| 122 | Workplace environment − air − air samples collected on filters | Concentration/content of metallic chromium, chromium (II) compounds - calculated as Cr (II), chromium (III) compounds – calculated as Cr (III) (calculated) | Test procedure PB-02, issue 2 of 17.07.2023 | ||
| 123 | Workplace environment − air − air samples collected on filters | Concentration/content of cobalt and its inorganic compounds – calculated as Co Range (0,00150 – 0,070) mg/m3 Range (0,00110 – 0,050) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04291:2003 | |
| 124 | Workplace environment − air − air samples collected on filters | Concentration/content of cadmium and its inorganic compounds – calculated as Cd inhalable fraction Range (0,0001080 – 0,0130) mg/m3 Range (0,0001030 – 0,010) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04102-03:2013-10 | |
| 125 | Workplace environment − air − air samples collected on filters | Potassium hydroxide concentration/content Range (0,0110 – 5,20) mg/m3 Range (0,00750 – 3,70) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04436:2011 | |
| 126 | Workplace environment − air − air samples collected on filters | Magnesium oxide concentration/content inhalable fraction Range (0,0480 – 23,70) mg/m3 Range (0,0340 – 8,50) mg in the sample |
Flame atomic absorption spectrometry (FAAS) characteristics/method | PN-Z-04470:2015-10 | |
| 127 | Workplace environment − air − air samples collected on filters | Sodium hydroxide concentration/content Range (0,020 – 3,0) mg/m3 Range (0,010 – 2,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04435:2011 | |
| 128 | Workplace environment − air − air samples collected on filters | Concentration/content of nickel compounds – calculated as Ni - inhalable fraction Range (0,000730 – 0,560) mg/m3 Range (0,000520 – 0,410) mg in the sample respirable fraction Range (0,000770 – 0,590) mg/m3 Range (0,000520 – 0,410) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019-10 | |
| 129 | Workplace environment − air − air samples collected on filters | Metallic nickel concentration/content Range (0,000730 – 0,560) mg/m3 Range (0,000520 – 0,410) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04502:2019-10 | |
| 130 | Workplace environment − air − air samples collected on filters | Concentration/content of antimony and its inorganic compounds, except stibine – calculated as Sb Range (0,0130 – 2,55) mg/m3 Range (0,0050 – 1,02) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04146-3:2006 | |
| 131 | Workplace environment − air − air samples collected on filters | Concentration/content of selenium and its compounds, except selane – calculated as Se Range (0,0160 – 0,30) mg/m3 Range (0,0110 – 0,210) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04468:2015-10 | |
| 132 | Workplace environment − air − air samples collected on filters | Concentration/content of tin and its inorganic compounds, except stannane – calculated as Sn inhalable fraction Range (0,130 – 6,60) mg/m3 Range (0,1250 – 4,80) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04488:2017-10 | |
| 133 | Workplace environment − air − air samples collected on filters | Concentration/content of calcium carbonate inhalable fraction: Range (0,30 – 31,0) mg/m3 Range (0,16 – 6,0) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04294:2001 | |
| 134 | Workplace environment − air − air samples collected on filters | Calcium oxide concentration/content inhalable fraction: Range (0,0460 – 12,0) mg/m3 Range (0,0360 – 3,60) mg in the sample respirable fraction: Range (0,0490 – 12,50) mg/m3 Range (0,0360 – 3,60) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04442:2023-05 | |
| 135 | Workplace environment − air − air samples collected on filters | Concentration/content of copper and its inorganic compounds – calculated as Cu Range (0,0040 – 1,70) mg/m3 Range (0,0030 – 1,20) mg in the sample |
Flame atomic absorption spectrometry (FAAS) characteristics/method | PN-79/Z-04106.02 | |
| 136 | Workplace environment − air − air samples collected on filters | Concentration/content of zinc oxide – calculated as Zn inhalable fraction Range (0,0040 – 10,50) mg/m3 Range (0,0030 – 7,50) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-87/Z-04100/03 | |
| 137 | Concentration/content of lead and its inorganic compounds, except lead (II) arsenate (V) and lead (II) chromate (VI) – expressed as Pb – inhalable fraction, Range: (0,00420 – 0,130) mg/m3 (0,00410 – 0,10) mg in sample, Flame atomic absorption spectrometry (FAAS) | Concentration/content of lead and its inorganic compounds, excluding lead (II) arsenate (V) and lead (II) chromate (VI) – calculated as Pb – inhalable fraction Range (0,00420 – 0,130) mg/m3 Range (0,00410 – 0,10) mg in the sample |
Flame atomic absorption spectrometry (FAAS) | PN-Z-04487:2017-10 | |
| 138 | Concentration/content of lead and its inorganic compounds, except lead (II) arsenate (V) and lead (II) chromate (VI) – expressed as Pb – inhalable fraction, Range: (0,00420 – 0,130) mg/m3 (0,00410 – 0,10) mg in sample, Flame atomic absorption spectrometry (FAAS) | Concentration/content of phosphoric (V) acid Range (0,0390 – 10,0) mg/m3 Range (0,0210 – 1,60) mg in the sample |
NIOSH 7908, Issue 1, 10.05.2014 | ||
| 139 | Concentration/content of lead and its inorganic compounds, except lead (II) arsenate (V) and lead (II) chromate (VI) – expressed as Pb – inhalable fraction, Range: (0,00420 – 0,130) mg/m3 (0,00410 – 0,10) mg in sample, Flame atomic absorption spectrometry (FAAS) | Concentration/content of tetraphosphorus decaoxide (calculated) Range (0,0280 – 8,0) mg/m3 Range (0,0150 – 1,20) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | NIOSH 7908, Issue 1, 10.05.2014 | |
| 140 | Hydrogen chloride concentration/content, Range: (0,0350 – 27,0) mg/m3 (0,0210 – 16,0) mg in sample, Ion chromatography method with conductometric detection (IC-CD) | Hydrogen chloride concentration/content Range (0,0350 – 27,0) mg/m3 Range (0,0210 – 16,0) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | NIOSH 7907, Issue 1, 20.05.2014 | |
| 141 | Hydrogen chloride concentration/content, Range: (0,0350 – 27,0) mg/m3 (0,0210 – 16,0) mg in sample, Ion chromatography method with conductometric detection (IC-CD) | Sulphur dioxide concentration/content Range (0,070 – 8,60) mg/m3 Range (0,0270 – 3,20) ppm Range (0,0020 – 0,650) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | OSHA ID-1011, 11.2007 | |
| 142 | Concentration/content of ozone, Range: (0,00840 – 0,830) mg/m3 (0,00150 – 0,0750) mg in sample, Ion chromatography with conductometric detection (IC-CD) | Ozone concentration/content Range (0,00840 – 0,830) mg/m3 Range (0,00150 – 0,0750) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | OSHA ID-214, 01.2008 | |
| 143 | Concentration/content of ozone, Range: (0,00840 – 0,830) mg/m3 (0,00150 – 0,0750) mg in sample, Ion chromatography with conductometric detection (IC-CD) | Concentration/content of sulfuric (VI) acid – thoracic fraction Range (0,0030 – 0,270) mg/m3 Range (0,00210 – 0,20) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | OSHA ID-214, 01.2008 | |
| 144 | Concentration/content of ozone, Range: (0,00840 – 0,830) mg/m3 (0,00150 – 0,0750) mg in sample, Ion chromatography with conductometric detection (IC-CD) | Concentration/content of nitric (V) acid Range (0,0350 – 13,0) mg/m3 Range (0,0210 – 8,0) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) characteristics/method | NIOSH 7907, Issue 1, 20.05.2014 | |
| 145 | Workplace environment − air − air samples collected on filters | Hydrogen fluoride concentration/content Range (0,0150 – 7,0) mg/m3 Range (0,0110 – 2,10) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | NIOSH 7906, Issue 2, 20.05.2014 | |
| 146 | Workplace environment − air − air samples collected on filters | Concentration/content of fluorides calculated as F- Range (0,0140 – 5,50) mg/m3 Range (0,010 – 2,0) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | NIOSH 7906, Issue 2, 20.05.2014 | |
| 147 | Workplace environment − air – air samples collected into absorbing solution | Ammonia concentration/content Range (3,0 – 60) mg/m3 Range (0,015 – 0,30) mg in the sample |
Spectrophotometric method | PN-71/Z-04041 | |
| 148 | Workplace environment − air – air samples collected into absorbing solution | Concentration / content of hydrogen peroxide Range (0,04 – 4,2) mg/m3 Range (0,0004 – 0,0032) mg in the sample |
Spectrophotometric method characteristics/method | PN-Z-04548:2023-03 | |
| 149 | Waste gases | Gas volume flow rate for dynamic pressures > 10 Pa | Stagnation pressure method | PN-Z-04030-7:1994 | |
| 150 | Waste gases | Gas volume flow rate for velocity Range (0,5 – 20) m/s |
Thermoanemometric method | PN-Z-04030-7:1994 | |
| 151 | Waste gases | Gas volume flow rate for velocity Range (0,6 – 30) m/s |
Anemometric method | PN-Z-04030-7:1994 | |
| 152 | Waste gases | Sampling for determination of dust concentration | PN-Z-04030-7:1994 | ||
| 153 | Waste gases | Dust concentration Range (0,0005 – 4) g/m3 |
Gravimetric method | PN-Z-04030-7:1994 | |
| 154 | Waste gases | Dust emission (calculated) | PN-Z-04030-7:1994 | ||
| 155 | Waste gases | Gas volume flow rate for differential pressures > 5 Pa | Differential pressure measurement method | PN-EN ISO 16911-1:2013-07 | |
| 156 | Waste gases | Sampling for determination of dust concentration | PN-EN 13284-1:2018-02 | ||
| 157 | Waste gases | Dust concentration Range (0,5 – 50) mg/m3 |
Gravimetric method | PN-EN 13284-1:2018-02 | |
| 158 | Waste gases | Dust emission (calculated) | PN-EN 13284-1:2018-02 | ||
| 159 | Waste gases | Oxygen concentration Range (1,00 – 21,00) % |
Electrochemical method | PN-ISO 10396:2001 | |
| 160 | Waste gases | CO, CO2, SO2 concentration | PN-ISO 10396:2001 | ||
| 161 | Waste gases | CO (2,5 – 2370) mg/m3 | PN-ISO 10396:2001 | ||
| 162 | Waste gases | CO2 (0,1 – 16,0) % | PN-ISO 10396:2001 | ||
| 163 | Waste gases | SO2 (3,0 – 2748) mg/m3 | Non-dispersive infrared spectrometry (NDIR) | PN-ISO 10396:2001 | |
| 164 | Waste gases | NO, NOx concentration | PN-ISO 10396:2001 | ||
| 165 | Waste gases | NO (1,4 – 932) mg/m3 | PN-ISO 10396:2001 | ||
| 166 | Waste gases | NOx (2,1 – 1429) mg/m3 | Chemiluminescence method | PN-ISO 10396:2001 | |
| 167 | Waste gases | Emission of CO, CO2, SO2, NO, NOx (NO and NO2 calculated as NO2) (calculated) | PN-ISO 10396:2001 | ||
| 168 | Waste gases | Concentration of organic substances in the form of gases and vapours expressed as total gaseous organic carbon Range (2 – 1000) mg/m3 |
Continuous flame ionization detection method (FID) | PN-EN 12619:2013-05 | |
| 169 | Waste gases | Emission of organic substances in the form of gases and vapours expressed as total gaseous organic carbon (calculated) characteristics/method | PN-EN 12619:2013-05 | ||
| 170 | Waste gases | Sampling for determination of the concentration of individual gaseous organic compounds | PN-EN 13649:2005 | ||
| 171 | Waste gases | Emission of individual gaseous organic compounds / sum of aromatic hydrocarbons (calculated) | PN-EN 13649:2005 | ||
| 172 | Waste gases | Sum of aromatic hydrocarbon contents (calculated) | PN-EN 13649:2005 | ||
| 173 | Waste gases | Concentration/content of organic compounds: methanol (10 – 3700) mg/m3 Range (0,05 – 2,75) mg in the sample acetone (0,0270 – 6667) mg/m3 (0,00160 – 10,0) mg in the sample butan-1-ol (0,0320 – 6667) mg/m3 (0,00190 – 10,0) mg in the sample ethyl acetate (0,0290 – 6667) mg/m3 (0,00170 – 10,0) mg in the sample butyl acetate (0,0250 – 6667) mg/m3 (0,00150 – 10,0) mg in the sample xylene (mixture of isomers: o-xylene, m-xylene, p-xylene) (0,0510 – 6667) mg/m3 (0,0030 – 10,00) mg in the sample (m+p)-xylene (0,0290 – 6667) mg/m3 (0,00170 – 10,0) mg in the sample o-xylene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample butan-2-one (0,0250 – 6667) mg/m3 (0,00150 – 10,0) mg in the sample toluene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample styrene (0,0240 – 6667) mg/m3 (0,00140 – 10,0) mg in the sample dichloromethane (0,0820 – 6667) mg/m3 (0,00490 – 10,0) mg in the sample |
PN-EN 13649:2005 | ||
| 174 | Waste gases | 4-methylpentan-2-one (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 175 | Waste gases | 1,2,3-trimethylbenzene (0,0250 – 6667) mg/m3 (0,00150 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 176 | Waste gases | 1,2,4-trimethylbenzene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 177 | Waste gases | 1,3,5-trimethylbenzene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample ethanol (0,0320 – 6667) mg/m3 (0,00190 – 10,0) mg in the sample methyl acetate (0,0470 – 6667) mg/m3 (0,00280 – 10,0) mg in the sample benzene (0,0440 – 800) mg/m3 (0,00260 – 1,20) mg in the sample | Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-EN 13649:2005 | |
| 178 | Waste gases, S | Concentration/content of organic compounds: | PN-EN 13649:2005 | ||
| 179 | Waste gases, S | 2-methylpropan-1-ol (0,0290 – 6667) mg/m3 (0,00170 – 10,0) mg in the sample isopropyl acetate (0,0450 – 6667) mg/m3 (0,00270 – 10,0) mg in the sample trichloroethylene (0,0850 – 6667) mg/m3 (0,00510 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 180 | Waste gases, S | 1-methoxypropan-2-ol (0,0590 – 6667) mg/m3 (0,00350 – 10,0) mg in the sample methylcyclohexane (0,0300 – 6667) mg/m3 (0,00180 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 181 | Waste gases, S | 2-ethoxyethanol (0,0850 – 6667) mg/m3 (0,00510 – 10,0) mg in the sample isobutyl acetate (0,0440 – 6667) mg/m3 (0,00260 – 10,0) mg in the sample tetrachloroethylene (0,0600 – 6667) mg/m3 (0,00360 – 10,0) mg in the sample ethylbenzene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample chlorobenzene (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample isopropylbenzene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 182 | Waste gases, S | 2-butoxyethanol (0,0590 – 6667) mg/m3 (0,00350 – 10,0) mg in the sample n-propylbenzene (0,0220 – 6667) mg/m3 (0,00130 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 183 | Waste gases, S | 2-ethyltoluene (0,0270 – 6667) mg/m3 (0,00160 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 184 | Waste gases, S | 3-ethyltoluene (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 185 | Waste gases, S | 4-ethyltoluene (0,0440 – 6667) mg/m3 (0,00260 – 10,0) mg in the sample ethyltoluene (mixture of isomers) (0,1050 – 6667) mg/m3 (0,00630 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 186 | Waste gases, S | 2-methylbutane (0,0340 – 6667) mg/m3 (0,00200 – 10,0) mg in the sample acrylonitrile (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample vinyl acetate (0,0620 – 6667) mg/m3 (0,00370 – 10,0) mg in the sample methyl acrylate (0,0450 – 6667) mg/m3 (0,00270 – 10,0) mg in the sample | Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-EN 13649:2005 | |
| 187 | Waste gases | Concentration/content of organic compounds: cyclohexane (0,0200 – 6667) mg/m3 Range (0,00120 – 10,0) mg in the sample methyl methacrylate (0,0490 – 6667) mg/m3 (0,00290 – 10,0) mg in the sample |
PN-EN 13649:2005 | ||
| 188 | Waste gases | 2-hexanone (0,0290 – 6667) mg/m3 (0,00170 – 10,0) mg in the sample butyl acrylate (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample 2-ethoxyethyl acetate (0,0470 – 6667) mg/m3 (0,00280 – 10,0) mg in the sample cyclohexanone (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample butyl methacrylate (0,0350 – 6667) mg/m3 (0,00210 – 10,0) mg in the sample 2-butoxyethyl acetate (0,0400 – 6667) mg/m3 (0,00240 – 10,0) mg in the sample aliphatic hydrocarbons C5 – C12 n-pentane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-hexane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-heptane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-octane (0,0200 – 6667) mg/m3 (0,00120 – 10,0) mg in the sample n-nonane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-decane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-undecane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample n-dodecane (0,0190 – 6667) mg/m3 (0,00110 – 10,0) mg in the sample | PN-EN 13649:2005 | ||
| 189 | Waste gases | 2-(2-butoxyethoxy)ethanol (0,0640 – 1200) mg/m3 (0,00380 – 1,80) mg in the sample | PN-EN 13649:2005 | ||
| 190 | Waste gases | 2-(2-methoxyethoxy)ethanol (0,0650 – 1266) mg/m3 (0,00390 – 1,90) mg in the sample | PN-EN 13649:2005 | ||
| 191 | Waste gases | 2-methoxyethanol (0,0300 – 1133) mg/m3 (0,00180 – 1,70) mg in the sample ethylene glycol (0,0920 – 1800) mg/m3 (0,00550 – 2,70) mg in the sample | Gas chromatography with flame ionization detection (GC-FID) characteristics/method | PN-EN 13649:2005 | |
| 192 | Waste gases, Concentration/content of organic compounds: Range: 2-methoxyethyl acetate (0,0640 – 1200) mg/m3 (0,00380 – 1,80) mg in sample 2-methoxy-1-methylethyl acetate (0,0900 – 1666) mg/m3 (0,00500 – 2,50) mg in sample propan-2-ol (0,0600 – 2133) mg/m3 (0,00330 – 3,20) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Gas chromatography with flame ionization detection (GC-FID) | PN-EN 13649:2005 | ||
| 193 | Waste gases, Concentration/content of organic compounds: Range: 2-methoxyethyl acetate (0,0640 – 1200) mg/m3 (0,00380 – 1,80) mg in sample 2-methoxy-1-methylethyl acetate (0,0900 – 1666) mg/m3 (0,00500 – 2,50) mg in sample propan-2-ol (0,0600 – 2133) mg/m3 (0,00330 – 3,20) mg in sample, Gas chromatography with flame ionisation detection (GC-FID) | Sampling for determination of sulfur dioxide concentration | PN-EN 14791:2017-04 | ||
| 194 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Concentration/Content of sulphur dioxide | Ion chromatography with conductometric detection (IC-CD) | PN-EN 14791:2017-04 | |
| 195 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Sulfur dioxide emission (calculated) | PN-EN 14791:2017-04 | ||
| 196 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Sampling for determination of hydrogen chloride concentration | PN-EN 1911:2011 | ||
| 197 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Hydrogen chloride concentration/content Range (0,440 – 273,0) mg/m3 Range (0,0260 – 8,20) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | PN-EN 1911:2011 | |
| 198 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Hydrogen chloride emission (calculated) | PN-EN 1911:2011 | ||
| 199 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Water vapour concentration (H2O) Range (29 – 250) g/m3 Range (4,0 – 40,0) % Range (3,14 – 57,41) % |
Condensation-adsorption method; Temperature method | PN-EN 14790:2017-04 | |
| 200 | Sulphur dioxide concentration/content, Range: (0,470 – 5533,0) mg/m3 (0,0140 – 166,0) mg in the sample, Ion chromatography with conductometric detection (IC-CD) | Oxygen concentration Range (1,0 – 21,0) % |
Paramagnetic method | PN-EN 14789:2017-04 | |
| 201 | NOx, NO concentration, Range: - NOx (2,1 – 1429) mg/m3 - NO (1,4 – 932) mg/m3, Chemiluminescence method | Oxygen concentration Range (1,0 – 21,0) % |
Paramagnetic method | PN-EN 14792:2017-04 | |
| 202 | CO concentration, Range: (2,5 – 2370) mg/m3, Non-dispersive infrared spectrometry method (NDIR) | Oxygen concentration Range (1,0 – 21,0) % |
Paramagnetic method | PN-EN 15058:2017-04 | |
| 203 | Waste gases | CO2 concentration Range (0,1 – 16,0) % |
Non-dispersive infrared spectrometry (NDIR) | ISO 12039:2019 | |
| 204 | Waste gases | CO2 emission (calculated) | ISO 12039:2019 | ||
| 205 | Waste gases | Sampling for determination of metal concentrations (As, Cd, Cr, Co, Cu, | PN-EN 14385:2025-05 | ||
| 206 | Waste gases | Mn, Ni, Pb, Sb, Tl, V ) | PN-EN 14385:2025-05 | ||
| 207 | Waste gases | Metal concentrations/contents: | PN-EN 14385:2025-05 | ||
| 208 | Waste gases | Cd (cadmium) (0,000043 – 2,7) mg/m3 (0,0011 – 2,5) mg in the sample | PN-EN 14385:2025-05 | ||
| 209 | Waste gases | Cr (chromium) (0,0009 – 14,1) mg/m3 (0,021 – 12,8) mg in the sample | PN-EN 14385:2025-05 | ||
| 210 | Waste gases | Co (cobalt) (0,00021 – 2,7) mg/m3 (0,0052 – 2,50) mg in the sample | PN-EN 14385:2025-05 | ||
| 211 | Waste gases | Cu (copper) (0,00011 – 2,7) mg/m3 (0,0026 – 2,50) mg in the sample | PN-EN 14385:2025-05 | ||
| 212 | Waste gases | Mn (manganese) (0,00009 – 1,6) mg/m3 (0,0021 – 1,5) mg in the sample | PN-EN 14385:2025-05 | ||
| 213 | Waste gases | Ni (nickel) (0,00021 – 5,5) mg/m3 (0,0052 – 5) mg in the sample | PN-EN 14385:2025-05 | ||
| 214 | Waste gases | Pb (lead) (0,0009 - 22) mg/m3 (0,021 – 20) mg in the sample | PN-EN 14385:2025-05 | ||
| 215 | Waste gases | Sb (antimony) (0,001 – 11) mg/m3 (0,00258 – 10) mg in the sample | PN-EN 14385:2025-05 | ||
| 216 | Waste gases | V (vanadium) (0,0101 – 9) mg/m3 (0,26 – 9) mg in the sample | Flame atomic absorption spectrometry (FAAS) | PN-EN 14385:2025-05 | |
| 217 | Waste gases | Emission of metals (As, Cd, Cr, Co, Cu, Mn, | PN-EN 14385:2025-05 | ||
| 218 | Waste gases | Ni, Pb, Sb, Tl, V) (calculated) | PN-EN 14385:2025-05 | ||
| 219 | Waste gases | Sampling for determination of the concentrations of organic compounds Aspiration method using activated carbon/silica gel / absorbing solutions | PN-Z-04008-4:1999 | ||
| 220 | Waste gases | Emission of organic compounds (calculated) characteristics/method | PN-Z-04008-4:1999 | ||
| 221 | Waste gases | Sampling for the determination of ammonia concentration | PN-EN ISO 21877:2020-03 | ||
| 222 | Waste gases | Ammonia concentration/content Range (0,102 – 324) mg/m3 Range (0,0064 – 4,86) mg in the sample |
Spectrophotometric method | PN-EN ISO 21877:2020-03 | |
| 223 | Waste gases | Ammonia emission (calculated) | PN-EN ISO 21877:2020-03 | ||
| 224 | Waste gases | Sampling for determination | Test procedure PB-31 issue 4 of 31.07.2024 test procedure PB-31 | ||
| 225 | Waste gases | ozone concentrations | issue 4 of 31.07.2024 | ||
| 226 | Waste gases | Ozone concentration/content Range (0,015 – 4,0) mg/m3 Range (0,001 – 0,01) mg in the sample |
Spectrophotometric method | issue 4 of 31.07.2024 | |
| 227 | Waste gases | Ozone emission (calculated) | issue 4 of 31.07.2024 | ||
| 228 | Waste gases | Sampling for determination | Test procedure PB-08 issue 5 of 31.07.2024 test procedure PB-08 | ||
| 229 | Waste gases | formaldehyde concentrations | issue 5 of 31.07.2024 | ||
| 230 | Waste gases | Formaldehyde concentration/content Range (0,090 – 83,0) mg/m3 Range (0,001 – 0,50) mg in the sample |
Spectrophotometric method | issue 5 of 31.07.2024 | |
| 231 | Waste gases | Formaldehyde emission (calculated) | issue 5 of 31.07.2024 | ||
| 232 | Waste gases | Sampling for determination of | Test procedure PB-28 issue 4 of 31.07.2024 test procedure PB-28 | ||
| 233 | Waste gases | hydrogen sulfide (H2S) concentrations | Aspiration method using absorbing solutions | issue 4 of 31.07.2024 | |
| 234 | Waste gases | Hydrogen sulfide (H2S) concentration/content Range (0,840 – 200,0) mg/m3 Range (0,01250 – 2,0) mg in the sample |
Spectrophotometric method | issue 4 of 31.07.2024 | |
| 235 | Waste gases | Hydrogen sulfide (H2S) emission (calculated) | issue 4 of 31.07.2024 | ||
| 236 | Waste gases | Phenol concentration/content | Test procedure PB-09 issue 4 of 30.06.2022 test procedure PB-09 | ||
| 237 | Waste gases | Range (0,0840 – 8400) mg/m3 Range (0,00500 – 12,6) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | issue 4 of 30.06.2022 | |
| 238 | Waste gases | Emission of individual gaseous organic compounds (calculated) | issue 4 of 30.06.2022 | ||
| 239 | Waste gases | Concentration/content of compounds | Test procedure PB-03 issue 2 of 03.10.2022 | PN-Z-04008-4:1999 test procedure PB-03 | ||
| 240 | Waste gases | organic – acetic acid | issue 2 of 03.10.2022 | ||
| 241 | Waste gases | Range (0,520 – 800) mg/m3 Range (0,0260 – 4,00) mg in the sample |
Gas chromatography with flame ionization detection (GC-FID) | PN-Z-04008-4:1999 | |
| 242 | Waste gases | Emission of individual gaseous organic compounds (calculated) characteristics/method | PN-Z-04008-4:1999 | ||
| 243 | Waste gases | Sampling for determination of | Test procedure PB-30 issue 3 of 29.06.2022 test procedure PB-30 | ||
| 244 | Waste gases | chlorine concentrations. | Aspiration method using absorbing solutions | issue 3 of 29.06.2022 | |
| 245 | Waste gases | Chlorine concentration/content Range (0,0170 – 1,0) mg/m3 Range (0,000250 – 0,0150) mg in the sample |
Spectrophotometric method | issue 3 of 29.06.2022 | |
| 246 | Waste gases | Chlorine emission (calculated) | issue 3 of 29.06.2022 | ||
| 247 | Waste gases | Dust sampling for determination | Test procedure PB-25 issue 5 of 30.06.2025 test procedure PB-25 | ||
| 248 | Waste gases | metal concentrations (As, Ca, Cd, Co, Cr, | issue 5 of 30.06.2025 | ||
| 249 | Waste gases | Cu, Fe, Mg, Mn, Mo, Ni, Pb, Sb, Se, | issue 5 of 30.06.2025 | ||
| 250 | Waste gases | Sn, V, Zn) | Aspiration method using filters | issue 5 of 30.06.2025 | |
| 251 | Waste gases | Metal concentrations/contents: | issue 5 of 30.06.2025 | ||
| 252 | Waste gases | Cd (cadmium) (0,000020 – 2,7) mg/m3 (0,00051 – 2,5) mg in the sample | issue 5 of 30.06.2025 | ||
| 253 | Waste gases | Co (cobalt) (0,00011 – 2,7) mg/m3 (0,00260 – 2,50) mg in the sample | issue 5 of 30.06.2025 | ||
| 254 | Waste gases | Cr (chromium) (0,00050 – 13,9) mg/m3 (0,0110 – 12,6) mg in the sample | issue 5 of 30.06.2025 | ||
| 255 | Waste gases | Cu (copper) (0,000060 – 2,7) mg/m3 (0,00130 – 2,50) mg in the sample | issue 5 of 30.06.2025 | ||
| 256 | Waste gases | Fe (iron) (0,00009 – 5,8) mg/m3 (0,00220 – 5,3) mg in the sample | issue 5 of 30.06.2025 | ||
| 257 | Waste gases | Mn (manganese) (0,000050 – 1,6) mg/m3 (0,00110 – 1,50) mg in the sample | issue 5 of 30.06.2025 | ||
| 258 | Waste gases | Mo (molybdenum) (0,00110 – 56) mg/m3 (0,026 – 51) mg in the sample | issue 5 of 30.06.2025 | ||
| 259 | Waste gases | Ni (nickel) (0,00011 – 5,5) mg/m3 (0,0026 – 5,0) mg in the sample | issue 5 of 30.06.2025 | ||
| 260 | Waste gases | Pb (lead) (0,00050 - 22) mg/m3 (0,0110 – 20,0) mg in the sample | issue 5 of 30.06.2025 | ||
| 261 | Waste gases | Sb (antimony) (0,000210 – 7,0) mg/m3 (0,0052 – 10,0) mg in the sample | issue 5 of 30.06.2025 | ||
| 262 | Waste gases | Se (selenium) (0,0011 – 42) mg/m3 (0,026 – 38) mg in the sample | issue 5 of 30.06.2025 | ||
| 263 | Waste gases | Sn (tin) (0,0031 – 171) mg/m3 (0,080 – 155) mg in the sample | issue 5 of 30.06.2025 | ||
| 264 | Waste gases | V (vanadium) (0,0051 – 171) mg/m3 (0,130 – 155) mg in the sample | issue 5 of 30.06.2025 | ||
| 265 | Waste gases | Zn (zinc) (0,000012 – 1,3) mg/m3 (0,00026 – 1,20) mg in the sample | Flame atomic absorption spectrometry (FAAS) | issue 5 of 30.06.2025 | |
| 266 | Waste gases | Emission of metals in dust (calculated) characteristics/method | issue 5 of 30.06.2025 | ||
| 267 | Waste gases | Sampling for determination of | Test procedure PB-27 issue 4 of 31.07.2024 test procedure PB-27 | ||
| 268 | Waste gases | concentrations of hexavalent chromium Cr6+ | Aspiration method using filters | issue 4 of 31.07.2024 | |
| 269 | Waste gases | Concentration/content of hexavalent chromium Cr6+ Range (0,0000390 – 0,0560) mg/m3 Range (0,0010 – 0,080) mg in the sample |
Spectrophotometric method | issue 4 of 31.07.2024 | |
| 270 | Waste gases | Emission of hexavalent chromium | issue 4 of 31.07.2024 | ||
| 271 | Waste gases | Cr6+ (calculated) | issue 4 of 31.07.2024 | ||
| 272 | Waste gases | Dust sampling for determination of PM 2,5; PM 10 concentration | PN-Z-04030-7:1994 | ||
| 273 | Waste gases | Emission of PM 2,5; PM 10 dust (calculated) | PN-Z-04030-7:1994 | ||
| 274 | Waste gases | Waste gas sampling | Test procedure PB-33 issue 3 of 31.07.2024 test procedure PB-33 | ||
| 275 | Waste gases | for determination of the concentration | issue 3 of 31.07.2024 | ||
| 276 | Waste gases | Methylenebis(phenyl isocyanate) (MDI) | issue 3 of 31.07.2024 | ||
| 277 | Waste gases | Hexane-1,6-diyl diisocyanate (HDI) | issue 3 of 31.07.2024 | ||
| 278 | Waste gases | Toluene-2,4-diyl diisocyanate (2,4 TDI) | issue 3 of 31.07.2024 | ||
| 279 | Waste gases | Toluene-2,6-diyl diisocyanate (2,6 TDI) | issue 3 of 31.07.2024 | ||
| 280 | Waste gases | Sum of MDI; HDI; 2,4 TDI; 2,6 TDI (calculated) | issue 3 of 31.07.2024 | ||
| 281 | Waste gases | Emission | issue 3 of 31.07.2024 | ||
| 282 | Waste gases | Methylenebis(phenyl isocyanate) (MDI) | issue 3 of 31.07.2024 | ||
| 283 | Waste gases | Hexane-1,6-diyl diisocyanate (HDI) | issue 3 of 31.07.2024 | ||
| 284 | Waste gases | Toluene-2,4-diyl diisocyanate (2,4 TDI) | issue 3 of 31.07.2024 | ||
| 285 | Waste gases | Toluene-2,6-diyl diisocyanate (2,6 TDI) (calculated) | issue 3 of 31.07.2024 | ||
| 286 | Waste gases | Sampling for determination of | Test procedure PB-32 issue 4 of 21.07.2025 test procedure PB-32 | ||
| 287 | Waste gases | concentrations of benzo-a-pyrene | issue 4 of 21.07.2025 | ||
| 288 | Waste gases | Concentration/content of benzo-a-pyrene Range (0,0000340 – 0,0040) mg/m3 Range (0,00010 – 0,0040) mg in the sample |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | issue 4 of 21.07.2025 | |
| 289 | Waste gases | Emission of benzo-a-pyrene (calculated) | issue 4 of 21.07.2025 | ||
| 290 | Waste gases | Sampling for determination of metal concentrations (Ba, B, Be, Bi, Se, Sn, | PN-EN 14385:2025-05 | ||
| 291 | Waste gas samples | Li, Ti, Zn) | PN-EN 14385:2025-05 | ||
| 292 | collected onto filters and into solution | Emission of metals (Ba, B, Be, Bi, Se, Sn, | PN-EN 14385:2025-05 | ||
| 293 | absorbing | Li, Ti, Zn) (calculated) characteristics/method | PN-EN 14385:2025-05 | ||
| 294 | Waste gases, Waste gas samples collected on filters | Sampling for determination of | Test procedure PB-04 issue 2 of 01.08.2024 test procedure PB-04 | ||
| 295 | Waste gases, Waste gas samples collected on filters | concentrations of sulfuric (VI) acid | issue 2 of 01.08.2024 | ||
| 296 | Waste gases, Waste gas samples collected on filters | Sulfuric(VI) acid concentration/content Range (0,0350 – 68,0) mg/m3 Range (0,00210 – 4,080) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | issue 2 of 01.08.2024 | |
| 297 | Waste gases, Waste gas samples collected on filters | Emission of sulphuric acid VI (calculated) | issue 2 of 01.08.2024 | ||
| 298 | Waste gases, Waste gas samples collected on filters | Sampling for determination of | Test procedure PB-05 issue 2 of 01.08.2024 test procedure PB-05 | ||
| 299 | Waste gases, Waste gas samples collected on filters | ozone concentrations | issue 2 of 01.08.2024 | ||
| 300 | Waste gases, Waste gas samples collected on filters | Ozone concentration/content Range (0,0540 – 10,0) mg/m3 Range (0,00160 – 0,150) mg in the sample |
Ion chromatography with conductometric detection (IC-CD) | issue 2 of 01.08.2024 | |
| 301 | Waste gases, Waste gas samples collected on filters | Ozone emission (calculated) | issue 2 of 01.08.2024 | ||
| 302 | Water, wastewater | pH Range 2,0 – 12,0 |
Potentiometric method | PN-EN ISO 10523:2012 | |
| 303 | Water, wastewater | Electrical conductivity Range (84 – 12880) μS/cm |
Conductometric method | PN-EN 27888:1999 | |
| 304 | Water, wastewater | Content of total suspended solids Range (2,0 – 2000) mg/l |
Gravimetric method | PN-EN 872:2007+Ap1:2007 | |
| 305 | Water, wastewater | Metal concentrations | PN-ISO 8288:2002 | ||
| 306 | Water, wastewater | Cd (cadmium) (0,050 – 100) mg/l | PN-ISO 8288:2002 | ||
| 307 | Water, wastewater | Co (cobalt) (0,10 – 100) mg/l | PN-ISO 8288:2002 | ||
| 308 | Water, wastewater | Cu (copper) (0,050 – 100) mg/l | PN-ISO 8288:2002 | ||
| 309 | Water, wastewater | Ni (nickel) (0,10 – 200) mg/l | PN-ISO 8288:2002 | ||
| 310 | Water, wastewater | Pb (lead) (0,40 – 80) mg/l | PN-ISO 8288:2002 | ||
| 311 | Water, wastewater | Zn (zinc) (0,010 – 60) mg/l | Flame atomic absorption spectrometry (FAAS) | PN-ISO 8288:2002 | |
| 312 | Water, wastewater | Cr (chromium) concentration Range (0,230 – 50) mg/l |
Flame atomic absorption spectrometry (FAAS) | PN-EN 1233:2000 | |
| 313 | Water, wastewater | Ammonium nitrogen concentration Range (0,050 – 400) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 314 | Water, wastewater | Ammonium ion concentration Range (0,065 – 515) mg/l |
Spectrophotometric method | PN-ISO 7150-1:2002 | |
| 315 | Water, wastewater | Nitrate nitrogen concentration Range (0,10 – 100) mg/l |
Spectrophotometric method | PN-82/C-04576-08 | |
| 316 | Water, wastewater | Nitrate concentration Range (0,45 – 440) mg/l |
Spectrophotometric method | PN-82/C-04576-08 | |
| 317 | Water, wastewater | Nitrite nitrogen concentration Range (0,013 – 30) mg/l |
Spectrophotometric method characteristics/method | PN-EN 26777:1999 | |
| 318 | Water, wastewater | Nitrite concentration Range (0,042 – 98) mg/l |
Spectrophotometric method | PN-EN 26777:1999 | |
| 319 | Water, wastewater | Total phosphorus concentration Range (0,20 – 40) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 8 +Ap1:2010+Ap2:2010 | |
| 320 | Water, wastewater | Orthophosphate concentration Range (0,050 – 40) mg/l |
Spectrophotometric method | PN-EN ISO 6878:2006 cl. 4 +Ap1:2010+Ap2:2010 | |
| 321 | Water, wastewater | Sulfate concentration Range (10 – 3000) mg/l |
Gravimetric method | PN-ISO 9280:2002 | |
| 322 | Water, wastewater | Chloride concentration Range (5 – 1000) mg/l |
Titrimetric method | PN-ISO 9297:1994 | |
| 323 | Water, wastewater | Sampling for testing | PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3 | PN-77/C-04584 | PN-ISO 5667-11:2017-10 | ||
| 324 | Water, wastewater | chemical and physical | Manual method | excluding cl. 5.2, 6.1.2, 6.2, 6.3 | |
| 325 | Water, wastewater | Temperature of the collected groundwater sample Range (0,0 – 50) °C |
PN-77/C-04584 | ||
| 326 | Water, wastewater | Sampling for chemical and physical testing | Manual method | PN-ISO 5667-10:2021-11 | PN-77/C-04584 | PN-ISO 5667-10:2021-11 | |
| 327 | Water, wastewater | Temperature of the collected rainwater/wastewater sample Range (0,0 – 50) °C |
PN-77/C-04584 | ||
| 328 | Water, wastewater | Sampling for chemical and physical testing | Manual method | PN-EN ISO 5667-6:2016-12 excluding cl. 7.2, 7.5, 7.6 | PN-77/C-04584 | |
| 329 | Water, wastewater | Temperature of the collected water sample Range (0,0 – 50) °C |
PN-EN ISO 5667-6:2016-12 excluding cl. 7.2, 7.5, 7.6 | PN-77/C-04584 | ||
Reference standards (163)
(Commission Directive (EU) 2015/996)
(consolidated text Journal of Laws 2023 item 1706)
+Ap1:2017-09
07.09.2021
CNOSSOS-EU
ISO 12039:2019
of the Minister of Climate and Environment of
NIOSH 6013 Method, Issue 1, 15 August 1994
NIOSH 7906, Issue 2, 20.05.2014
NIOSH 7907, Issue 1, 20.05.2014
NIOSH 7908, Issue 1, 10.05.2014
OSHA ID-1011, 11.2007
OSHA ID-182, 05.1991
OSHA ID-190, 05.1991
OSHA ID-214, 01.2008
PN-71/Z-04041
PN-75/Z-04037/03
PN-76/Z-04045/02
PN-77/C-04584
PN-78/Z-04119/01
PN-79/Z-04081/01
PN-79/Z-04106.02
PN-81/Z-04134/02
PN-81/Z-04134/03
PN-82/C-04576-08
PN-83/Z-04047/03
PN-83/Z-04110/02
PN-83/Z-04118/02
PN-84/Z-04137/02
PN-84/Z-04138/02
PN-86/Z-04113/05
PN-86/Z-04113/06
PN-86/Z-04151/02
PN-86/Z-04152/02
PN-86/Z-04167/02
PN-86/Z–04166/02
PN-87/Z-04100/03
PN-87/Z-04126/03
PN-87/Z-04178/02
PN-88/Z-04184/02
PN-88/Z-04203/02
PN-89/Z-04023/02
PN-92/Z-04113/09
PN-92/Z-04224/02
PN-92/Z-04227/02
PN-96/Z-04015/13
PN-EN 1233:2000
PN-EN 12619:2013-05
PN-EN 13284-1:2018-02
PN-EN 13649:2005
PN-EN 14253+A1:2011
PN-EN 14385:2025-05
PN-EN 14789:2017-04
PN-EN 14790:2017-04
PN-EN 14791:2017-04
PN-EN 14792:2017-04
PN-EN 15058:2017-04
PN-EN 1911:2011
PN-EN 26777:1999
PN-EN 27888:1999
PN-EN 872:2007+Ap1:2007
PN-EN ISO 10523:2012
PN-EN ISO 11079:2008
PN-EN ISO 16911-1:2013-07
PN-EN ISO 21877:2020-03
PN-EN ISO 3746:2011
PN-EN ISO 3746:2011 +Ap1:2017-09
PN-EN ISO 3746:2011 excluding cl. 8.4
PN-EN ISO 5349-1:2004
PN-EN ISO 5349-2:2004
PN-EN ISO 5349-2:2004/A1:2015
PN-EN ISO 5667-6:2016-12 excluding cl. 7.2, 7.5, 7.6
PN-EN ISO 6878:2006 cl. 4 +Ap1:2010+Ap2:2010
PN-EN ISO 6878:2006 cl. 8 +Ap1:2010+Ap2:2010
PN-EN ISO 7243:2018-01
PN-EN ISO 9612:2011 excluding the method covering strategy 2 (cl. 10) and strategy 3 (cl. 11)
PN-EN-ISO 7730:2006 + Ap2:2016-04
PN-ISO 10396:2001
PN-ISO 5667-10:2021-11
PN-ISO 5667-11:2017-10
PN-ISO 5667-11:2017-10 excluding cl. 5.2, 6.1.2, 6.2, 6.3
PN-ISO 7150-1:2002
PN-ISO 8288:2002
PN-ISO 9280:2002
PN-ISO 9297:1994
PN-ISO 9613-2:2002
PN-N-01307:1994
PN-Z-04008-4:1999
PN-Z-04008-4:1999 test procedure PB-03
PN-Z-04008-7:2002+Az1:2004
PN-Z-04016-10:2005
PN-Z-04016-4:1998
PN-Z-04016-5:1998
PN-Z-04016-6:1998
PN-Z-04030-7:1994
PN-Z-04102-03:2013-10
PN-Z-04108-5:2006
PN-Z-04119-10:2008
PN-Z-04119-11:2008
PN-Z-04136-3:2003
PN-Z-04146-3:2006
PN-Z-04165-3:2001
PN-Z-04283:2001
PN-Z-04291:2003
PN-Z-04294:2001
PN-Z-04304:2003
PN-Z-04318:2005
PN-Z-04323:2004-07
PN-Z-04354:2005
PN-Z-04372:2009
PN-Z-04376:2010
PN-Z-04399:2011
PN-Z-04402:2011
PN-Z-04434:2011
PN-Z-04435:2011
PN-Z-04436:2011
PN-Z-04442:2023-05
PN-Z-04447-06:2014
PN-Z-04449-06:2014
PN-Z-04468:2015-10
PN-Z-04469:2025-02
PN-Z-04470:2015-10
PN-Z-04472:2015-10
PN-Z-04472:2015-10/Ap1:2015-12
PN-Z-04476:2016-10
PN-Z-04487:2017-10
PN-Z-04488:2017-10
PN-Z-04502:2019-10
PN-Z-04507:2022-05
PN-Z-04507:2022-05/ Ap1:2022-08
PN-Z-04508:2022-05
PN-Z-04508:2022-05/ Ap1:2022-08
PN-Z-04537:2022-03
PN-Z-04548:2023-03
PN-Z-04556:2024-09
PN–Z-04119-7:2006
Principles and Methods of Assessing the Working Environment 1999, No. 22, pp. 96-100
Test procedure PB-01 issue 6 of 27.06.2025
Test procedure PB-02, issue 2 of 17.07.2023
Test procedure PB-04 issue 2 of 01.08.2024 test procedure PB-04
Test procedure PB-05 issue 2 of 01.08.2024 test procedure PB-05
Test procedure PB-08 issue 5 of 31.07.2024 test procedure PB-08
Test procedure PB-25 issue 5 of 30.06.2025 test procedure PB-25
Test procedure PB-27 issue 4 of 31.07.2024 test procedure PB-27
Test procedure PB-28 issue 4 of 31.07.2024 test procedure PB-28
Test procedure PB-30 issue 3 of 29.06.2022 test procedure PB-30
Test procedure PB-31 issue 4 of 31.07.2024 test procedure PB-31
Test procedure PB-32 issue 4 of 21.07.2025 test procedure PB-32
Test procedure PB-33 issue 3 of 31.07.2024 test procedure PB-33
Test procedure PB-03 issue 2 of 03.10.2022
Test procedure PB-09 issue 4 of 30.06.2022 test procedure PB-09
Annex No. 7 to the regulation
issue 2 of 01.08.2024
issue 2 of 03.10.2022
issue 3 of 29.06.2022
issue 3 of 31.07.2024
issue 4 of 21.07.2025
issue 4 of 30.06.2022
issue 4 of 31.07.2024
issue 5 of 30.06.2025
issue 5 of 31.07.2024
excluding cl. 5.2, 6.1.2, 6.2, 6.3
excluding cl. 8.4