🇵🇱 INSTYTUT TECHNIKI BUDOWLANEJ PL
ConstructionMaterials & polymersWater & wastewaterElectronics & EMCEnvironment
INSTYTUT TECHNIKI BUDOWLANEJ is a laboratory accredited by PCA under number AB 023 (Warszawa, Poland). Its accreditation scope covers 1494 test methods in the following areas: Construction, Materials & polymers, Water & wastewater, Electronics & EMC. Test objects include: Plastic products E, Thermal insulation products for buildings and thermal insulation pr…, Coating products for the protection of metal elements E, Ground. Most frequently used techniques: Gravimetric method, Laboratory method, Pull-off method.
At a glance
- Accreditation number: PCA AB 023
- Methods in scope: 1494
- Types of test objects: 361
- Techniques used: 116
- City: Warszawa, Poland
- Accreditation number
- AB 023
- Accreditation body
- PCA
- Address
- ZESPÓŁ LABORATORIÓW BADAWCZYCH, ul. Filtrowa 1, 00-611 Warszawa
- City
- Warszawa, Poland
What this laboratory tests (361)
- Plastic products E — 37 methods
- Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) — 32 methods
- Coating products for the protection of metal elements E — 28 methods
- Ground — 27 methods
- Gates E — 25 methods
- Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes — 24 methods
- Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated — 23 methods
- Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes — 22 methods
- Cement binders E — 21 methods
- Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console — 21 methods
- Locks and strikes E — 20 methods
- Admixtures for concrete, mortar and grout E — 18 methods
- Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes — 18 methods
- Coatings E — 17 methods
- Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes — 16 methods
- and 346 more
Analytical techniques used (116)
- Gravimetric method — 57 methods
- Laboratory method — 22 methods
- Pull-off method — 22 methods
- Titrimetric method — 15 methods
- Strength test method — 13 methods
- Linear measurement method — 6 methods
- Method A — 6 methods
- Static load method — 6 methods
- Bending method — 5 methods
- Flow table method — 5 methods
- Spectrophotometric method — 5 methods
- UV exposure method — 5 methods
- Finite element method — 4 methods
- Method: Böhme disc — 4 methods
- Pressure method — 4 methods
- and 101 more
Laboratory sections (7)
- Building Components Laboratory (LZE) — 641 methods
- Building Structures, Geotechnics and Concrete Laboratory (LZK) — 260 methods
- Building Materials Laboratory (LZM) — 218 methods
- Building Physics, Acoustics and Environment Laboratory (LZF) — 110 methods
- Fire Testing Laboratory (LZP) — 107 methods
- Building Structures, Geotechnics and Concrete Laboratory (LZK); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice — 83 methods
- Building Physics, Acoustics and Environment Laboratory (LZF); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice — 46 methods
Laboratory locations
- INSTYTUT TECHNIKI BUDOWLANEJ (main site) — ul. Filtrowa 1, 00-611 Warszawa
- TESTING LABORATORIES TEAM — ul. Filtrowa 1
- Building Components Laboratory (LZE) — ul. Ksawerów 21, 02-656 Warszawa
- Building Physics, Acoustics and Environment Laboratory (LZF) — ul. Ksawerów 21, 02-656 Warszawa
- Building Structures, Geotechnics and Concrete Laboratory (LZK) — ul. Filtrowa 1, 00-611 Warszawa
- Building Materials Laboratory (LZM) — ul. Filtrowa 1, 00-611 Warszawa
- Fire Testing Laboratory (LZP) — ul. Ksawerów 21, 02-656 Warszawa
- Building Physics, Acoustics and Environment Laboratory (LZF); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice
- Building Structures, Geotechnics and Concrete Laboratory (LZK); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice
Certificate information
- Issue date
- 12.10.2026
- Issue no.
- 32
Accreditation scope — test methods (1494)
| No. | Test object | Methodology / Parameters | Technique | Reference document | |
|---|---|---|---|---|---|
| Building Components Laboratory (LZE) | |||||
| 1 | Buildings and parts of buildings | Building airtightness Range 5-8300CFM |
PN-EN ISO 9972:2015-10 | ||
| 2 | Building balustrades and handrails | External visual examination | PB LZE-140/2/04-2019 | ||
| 3 | Building balustrades and handrails | Resistance to soft and heavy body impact Range impact body - bag 30 kg |
PB LZE-140/2/04-2019 | ||
| 4 | Building balustrades and handrails | Resistance to soft and heavy body impact Range impact body - tyre 50 kg |
PB LZE-140/2/04-2019 | ||
| 5 | Building balustrades and handrails | Resistance to static loads load up to 3 kN/m Static load |
PB LZE-140/2/04-2019 | ||
| 6 | Building balustrades and handrails | Resistance to hard body impact Range impact body - steel ball 0,5 kg |
PB LZE-140/2/04-2019 | ||
| 7 | Building balustrades and handrails | Resistance to wind load | PB LZE-140/2/04-2019 | ||
| 8 | Building balustrades and handrails | Geometric dimensions | PB LZE-140/2/04-2019 | ||
| 9 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to static loads acting perpendicular to the plane of the leaf | Static load method | PB LZE-120/4/04-2018 | |
| 10 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Shock resistance | PB LZE-078/9/04-2018 | PB LZE-120/4/04-2018 | PB LZE-123/3/04-2018 | ||
| 11 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to vertical static load acting in the plane of the sash | Static load method | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | |
| 12 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Range body with a mass of 30 kg or 50 kg |
PB LZE-123/3/04-2018 | PB LZE-120/4/04-2018 | ||
| 13 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to hard body impact | PB LZE-122/3/04-2018 | ||
| 14 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to repeated opening and closing | Manual handling method | PB LZE-120/4/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | |
| 15 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Force needed to open the leaf fully from the closed position | PB LZE-123/3/04-2018 | ||
| 16 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Size of the rebate gap and the rebate clearance | PB LZE-078/9/04-2018 | ||
| 17 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Door workmanship | Visual method | PB LZE-078/9/04-2018 | PB LZE-120/4/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | |
| 18 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Linear dimensions of door frames | Linear measurement method | PB LZE-078/9/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | |
| 19 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Strength of connections of hinge leaves to the frame under permissible loads | Static load method | PB LZE-078/9/04-2018 | |
| 20 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Correct operation | PB LZE-078/9/04-2018 | PB LZE-120/4/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | ||
| 21 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 22 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Force needed to bolt the door | AAMA/WDMA/CSA 101/I.S.2/A440-22 | ||
| 23 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440-22+ ASTM E2068-00(2022) | ||
| 24 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 25 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 26 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 27 | Building elements - walls - partition walls - curtain walls - roofs - roof coverings - other | Resistance to horizontal load and self-weight Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Finite element method | PN-EN 13830:2005 „N” | PB LK-131/2/02-2015 | |
| 28 | Building elements - walls - partition walls - curtain walls - roofs - roof coverings - other | Resistance to driving rain pressure up to 5000 Pa |
PN-EN 12865:2004 procedure A | ||
| 29 | Building elements - walls - partition walls - curtain walls - roofs - roof coverings - other | Watertightness under dynamic air pressure and water spray | PN-EN 13050:2011 | ||
| 30 | Building elements - walls - partition walls - curtain walls - roofs - roof coverings - other | Resistance to horizontal linear force Range up to 5 kN |
PB LZE-105/2/04-2019 | ||
| 31 | Building elements - walls - partition walls - curtain walls - roofs - roof coverings - other | Watertightness Regulated area: + Tests performed at and outside the laboratory premises |
Proving ground method + | AAMA 501.2 | |
| 32 | Curtain walling | Resistance to vertical load, force from 0 up to 20 kN, Displacement: from 0 up to 50 mm |
Method A | PN-EN 16758:2021-10 | |
| 33 | Curtain walling | Resistance to horizontal load, force from 0 up to 20 kN, Displacement: from 0 up to 50 mm |
Method A | PN-EN 16758:2021-10 | |
| 34 | Curtain walling | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 35 | Curtain walling | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 36 | Curtain walling | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 37 | Curtain walling | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 38 | Composite panels | Climatic test cycles | ETAG 016:2004 part 2 ETAG 016:2004 part 3 | ||
| 39 | Composite panels | Load-bearing capacity of a freely supported slab under loads acting towards the support | Bending method | ETAG 016:2004 part 1 | |
| 40 | Composite panels | Load-bearing capacity of a fixed slab under loads acting away from the support | Bending method | ETAG 016:2004 part 1 | |
| 41 | Composite panels | Resistance to soft body and hard body impact | Impact method | ETAG 016:2004 part 2 ETAG 016:2004 part 3 TR001 | |
| 42 | Composite panels | Creep | ETAG 016:2004 part 2 | ||
| 43 | Composite panels | Durability – climatic test cycles, Temp. up to 80oC, surface area up to (3x4) m | ETAG 016:2004 part 2 ETAG 016:2004 part 3 | ||
| 44 | Composite panels | Strength of the boards at the fixing points on the joints (load capacity and stability of the fasteners) | ETAG 016:2004 part 1 | ||
| 45 | Composite panels | Resistance to eccentric load caused by objects fixed to the board | ETAG 016:2004 part 2 ETAG 016:2004 part 3 | ||
| 46 | Composite panels | Strength of the fixings to the board | ETAG 016:2004 part 3 | ||
| 47 | Composite panels | Ability to carry (temporary) occasional pedestrian traffic | Point load method | ETAG 016:2004 part 2 | |
| 48 | Partition walls | Hard body impact resistance clause E 3 | EAD 210005-00-0505 | ||
| 49 | Roof lights | Permeability Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 1873:2009 „N” | PN-EN 1873+A1:2016-03 | ||
| 50 | Rooflights: - continuous, - point, - other | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 51 | Rooflights: - continuous, - point, - other | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440:22 | ASTM E2068-00(2022) | ||
| 52 | Rooflights: - continuous, - point, - other | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 53 | Rooflights: - continuous, - point, - other | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 54 | Rooflights: - continuous, - point, - other | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 55 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 56 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440:22 | ASTM E2068-00(2022) | ||
| 57 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 58 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 59 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 60 | Shopfronts | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 61 | Shopfronts | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 62 | Shopfronts | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 63 | Shopfronts | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 64 | Gates E | Safety in use of power operated gates Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12445 “N” | PN-EN 12453 “N” | ||
| 65 | Gates E | Edge forces Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12453 “N” | ||
| 66 | Gates E | Functionality Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 “N” | PN-EN 12604 “N” | ||
| 67 | Gates E | Durability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 “N” | PN-EN 12604 “N” | ||
| 68 | Gates E | Workmanship Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 “N” | PN-EN 12604 “N” | ||
| 69 | Gates E | Safety in use of power operated gates: Crushing, shearing and drawing-in hazard; Opening and closing forces; Detection of presence; Crushing and shearing hazard caused by the possibility of a person being carried along with the gate; Impact hazard; Manual operation; Verification of safety with regard to other hazards + Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. + Tests performed at and outside the laboratory premises |
PN-EN 12453 | ||
| 70 | Gates E | Resistance to wind load pressure (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. + Tests performed at and outside the laboratory premises |
Uniform load method + | PN-EN 12444 “N” | PN-EN 12424 “N” | |
| 71 | Gates E | Resistance to water penetration Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12489 “N” | PN-EN 12425 “N” | ||
| 72 | Gates E | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12427 “N” | PN-EN 12426 “N” | ||
| 73 | Gates E | Resistance to wind load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Finite element method | PN-EN 12444 „N” | |
| 74 | Gates E | Self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 75 | Gates E | Durability of self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 76 | Gates E | Mechanical aspects: Design and construction; Protection against unintended or uncontrolled movement; Forces for manual operation; Manual operating devices – check/inspection of the location and safe design of handles with regard to the risk of crushing, trapping or cutting the hand; Finger protection; Verification of the special requirements for components used in suspension and balancing systems; Gangway doors - visual checks/inspections of the safe position, protection against unintended movement and threshold requirements; Warning signs and/or devices – check and visual inspection of the possibility of recognising dangerous places and hazards by means of warning signs/devices + Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. + Tests performed at and outside the laboratory premises |
PN-EN 12604 | ||
| 77 | Road traffic noise reducing devices E | Self-weight Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-1 „N” | ||
| 78 | Road traffic noise reducing devices E | Resistance to falling debris Range body with a mass of 45 kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-2 „N” | ||
| 79 | Road traffic noise reducing devices E | Secondary safety, Resistance to falling fragments Range body with a mass of 400 kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-2 „N” | ||
| 80 | Road traffic noise reducing devices E | Wind load and static loads Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-1 „N” | ||
| 81 | Road traffic noise reducing devices E | Resistance to dynamic load associated with snow removal Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-1 „N” | ||
| 82 | Road traffic noise reducing devices E | Stone impact resistance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1794-1 „N” | ||
| 83 | Road traffic noise reducing devices E | Wind load and static loads Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Finite element method | PB LZE-145/2/12-2024 | PN-EN 1794-1 „N” | |
| 84 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Load-bearing capacity of safety devices Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14351-1 | PN-EN 948 „N” | ||
| 85 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to various climates Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1121 | ||
| 86 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to vertical loads Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. + Tests performed at and outside the laboratory premises |
Static load method + | PN-EN 947 | |
| 87 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to static load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Static load method | PN-EN 1527 | |
| 88 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to wind load pressure (–5000 - +5000) Pa + Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. + Tests performed at and outside the laboratory premises |
PN-EN 12211 „N” | PN-EN 16361 | ||
| 89 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Range body with a mass of 30 kg or 50 kg + Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. + Tests performed at and outside the laboratory premises |
PN-EN 949 | PN-EN 13049 „N” | PN-EN 16361 | PN-EN 14351-2 + PN-EN 12600 | ||
| 90 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 950 | ||
| 91 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Automatic method | PN-EN 1191 | |
| 92 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Height Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 93 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 94 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Overall and local flatness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 952 | ||
| 95 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Smoothness of operation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1527 | ||
| 96 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1026 „N” | PN-EN 16361 | PN-EN 14351-2 | ||
| 97 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 98 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Force needed to start the movement of the leaf (initial friction) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1527 | ||
| 99 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Operating forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-2 | PN-EN 16361 | ||
| 100 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Durability of self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 101 | Doors, door sets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Watertightness Range up to 5000 Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1027 „N” | PN-EN 16361 | ||
| 102 | Doors, doorsets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire-resistant - smoke-tight - manually operated and power-operated - with panic hardware - on escape routes | Dimensions and deviations from squareness of leaves Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 951 | ||
| 103 | Doors, doorsets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire-resistant - smoke-tight - manually operated and power-operated - with panic hardware - on escape routes | Height and width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Linear measurement method | PN-EN 14351-1 | PN-EN 16361 | |
| 104 | Doors, doorsets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire-resistant - smoke-tight - manually operated and power-operated - with panic hardware - on escape routes | Static torsional strength Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. + Tests performed at and outside the laboratory premises |
Static load method + | PN-EN 948 | |
| 105 | Doors, doorsets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire-resistant - smoke-tight - manually operated and power-operated - with panic hardware - on escape routes | Strength of connections of hinge leaves to the frame under static concentrated force in the plane of the leaf Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Static load method | PN-EN 947 | |
| 106 | Doors, doorsets, leaves, frames: E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire-resistant - smoke-tight - manually operated and power-operated - with panic hardware - on escape routes | Release capability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | PN-EN 179 | PN-EN 14351-2 | ||
| 107 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Resistance to horizontal load and self-weight Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Finite element method | PN-EN 13830 „N” | PB LK-131 | |
| 108 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Resistance to wind load pressure (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Uniform loading method | PN-EN 12179 | PN-EN 13116 | |
| 109 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13049 „N” | PN-EN 14019 „N” | PN-EN 12600 „N” | ||
| 110 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12153 | PN-EN 12152 | PN-EN 12114 | ||
| 111 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Watertightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Proving ground method | PN-EN 13051 | |
| 112 | Building elements: E - walls - curtain walls - roofs - roof coverings - other | Watertightness pressure up to 5000 Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12155 „N” | PN-EN 12154 | ||
| 113 | Metal profiles with thermal break E | Resistance to humidity Range up to 60 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14024 | |
| 114 | Metal profiles with thermal break E | Resistance after immersion in water Range up to 60 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14024 | |
| 115 | Metal profiles with thermal break E | Transverse tensile strength (Q) Range up to 60 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Stretching method | PN-EN 14024 | |
| 116 | Metal profiles with thermal break E | Shear strength (T) Range up to 60 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Shear method | PN-EN 14024 | |
| 117 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Load-bearing capacity of safety devices Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14351-1 | PN-EN 14609 „N” | ||
| 118 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to loads in the plane of the sash Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14608 | PN-EN 13115 | ||
| 119 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to wind load pressure (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Pressure difference method | PN-EN 12211 „N” | |
| 120 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to static torsion+ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14609 | PN-EN 13115 | ||
| 121 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to soft and heavy body impact Range body with a mass of 50 kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13049 „N” | ||
| 122 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1026 „N” | ||
| 123 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Operating forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-1 | PN-EN 13115 | ||
| 124 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness pressure up to 5000 Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1027 „N” | ||
| 125 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Height and width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Linear measurement method | PN-EN 14351-1 | |
| 126 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1191 | ||
| 127 | Composite panels E | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12114 | ||
| 128 | Composite panels E | Watertightness of the wall Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12865 | ||
| 129 | Sandwich panels E | Resistance to concentrated load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14509 | ||
| 130 | Sandwich panels E | Creep coefficient Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14509 | ||
| 131 | Sandwich panels E | Interaction between bending moment and support reaction Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 132 | Sandwich panels E | Bending moment and stiffness of a freely supported slab Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 133 | Building partitions with increased burglary resistance including: E - windows - doors - curtain walls - gates - shutters - others | Resistance to testing with tools Range product group 1 classes 2 and 3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 134 | Building partitions with increased burglary resistance including: E - windows - doors - curtain walls - gates - shutters - others | Resistance to dynamic loads Range product group 1 classes 2 and 3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 135 | Building partitions with increased burglary resistance including: E - windows - doors - curtain walls - gates - shutters - others | Resistance to static loads Range product group 1 classes 2 and 3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 136 | Self-supporting translucent roof kits E | Load-bearing capacity under pull-off and compressive loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 220089-XX-0401 | ||
| 137 | Self-supporting translucent roof kits E | Soft body impact resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 220089-XX-0401 | ||
| 138 | Self-supporting translucent roof kits E | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 220089-XX-0401 | ||
| 139 | Self-supporting translucent roof kits E | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 220089-XX-0401 | ||
| 140 | Self-supporting translucent roof kits E | Watertightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 220089-XX-0401 | ||
| 141 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Chromaticity in daylight Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3; CIE Technical Report 15 | ||
| 142 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Water resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3 | ||
| 143 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Static strength (resistance to horizontal loads) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3 | ||
| 144 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Luminance factor Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899- 3; CIE Technical Report 15 | ||
| 145 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Coefficient of retroreflection Range 0-203 cd/m2lx α=20’ (0,33°), β=+5°, +30°, +40° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3; CIE Technical Report 54.2 | ||
| 146 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Resistance to dynamic impact (material test) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3 | ||
| 147 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Resistance to dynamic impact (functional test) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3 | ||
| 148 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Resistance to dynamic impact of retro-reflecting devices Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-3 | ||
| 149 | Permanent vertical road signs, Fixed signs E | Chromaticity in daylight Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-1, CIE 15 technical report | ||
| 150 | Permanent vertical road signs, Fixed signs E | Design characteristics: temporary deformation - bending and torsion resistance to dynamic snow load resistance to wind resistance to concentrated loads permanent deformation fixing strength self-weight Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Test method; Finite element method | PN-EN 12899-1 | PB LZE 144/2/12-2024 | |
| 151 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Impact strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-1 | ||
| 152 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Luminance factor Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-1, CIE 15 technical report | ||
| 153 | Permanent vertical road signs, Delineator posts and retroreflective devices E | Coefficient of retroreflection Range 0-203 cd/m2lx α=20’ (0,33°), β=+5°, +30°, +40° Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12899-1; CIE Technical Report 54.2 | ||
| 154 | Suspended ceilings E | Impact resistance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13964 „N” | ||
| 155 | PVC gutter systems E | Load-bearing capacity of downpipe brackets Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12095 | PN-EN 12200-1 | ||
| 156 | PVC gutter systems E | Load-bearing capacity of gutter brackets Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1462 | ||
| 157 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Resistance to clamping load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | ||
| 158 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Resistance to loads acting from below Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” EAD 220021-XX-0402 | ||
| 159 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Resistance to loads acting from above Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” EAD 220021-XX-0402 | ||
| 160 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Resistance to peeling load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | ||
| 161 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Soft-heavy body impact resistance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | PN-EN 1873 EAD 220021-XX-0402 | ||
| 162 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | PN-EN 1873 EAD 220021-XX-0402 | ||
| 163 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1026 „N” | PN-EN 12153 EAD 220021-XX-0402 | ||
| 164 | Road studs E - strip - point - other, Permanent vertical road signs, Fixed signs | Watertightness Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | PN-EN 1873 EAD 220021-XX-0402 | ||
| 165 | Products for sealing window-to-wall joints E | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1026 | ||
| 166 | Products for sealing window-to-wall joints E | Watertightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1027 | ||
| 167 | Glass panes E | Impact resistance Range body with a mass of 50 kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12600 „N” | ||
| 168 | Glass panes E | Resistance of protective glazing to manual attack Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 356 „N” | ||
| 169 | Partition walls E | Strength under impact load – safety in use impactor up to 50 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Impact method | EAD 210005-XX-0505 | |
| 170 | Partition walls E | Strength under impact load – durability and serviceability impactor up to 50 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Impact method | EAD 210005-XX-0505 | |
| 171 | Partition walls E | Resistance to horizontal linear static load force up to 10 kN/m, deformations up to 20 cm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 210005-XX-0505 | ||
| 172 | Ventilated cladding kits and VETURE kits E | Resistance to varying temperature Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 | ||
| 173 | Ventilated cladding kits and VETURE kits E | Resistance to wind Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 EAD 040914-XX-0404 | ||
| 174 | Ventilated cladding kits and VETURE kits E | Resistance to horizontal force load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 EAD 040914-XX-0404 | ||
| 175 | Ventilated cladding kits and VETURE kits E | Resistance to vertical force load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 EAD 040914-XX-0404 | ||
| 176 | Ventilated cladding kits and VETURE kits E | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 EAD 040914-XX-0404 | ||
| 177 | Ventilated cladding kits and VETURE kits E | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 EAD 040914-XX-0404 | ||
| 178 | Ventilated cladding kits and VETURE kits E | Resistance of grid components to horizontal force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 | ||
| 179 | Ventilated cladding kits and VETURE kits E | Resistance of grid components to vertical force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 | ||
| 180 | Ventilated cladding kits and VETURE kits E | Pull-through resistance Range for product families A, B and D Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 | ||
| 181 | Ventilated cladding kits and VETURE kits E | Resistance to wind Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pressure difference method | EAD 090062-XX-0404 | |
| 182 | Ventilated cladding kits and VETURE kits E | Resistance to vertical force load of the complete set Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 090062-XX-0404 | ||
| 183 | Ventilated cladding kits and VETURE kits E | Resistance of the bracket to vertical force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | EAD 090062-XX-0404 | |
| 184 | Ventilated cladding kits and VETURE kits E | Resistance of the bracket to horizontal force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | EAD 090062-XX-0404 | |
| 185 | Blinds E | Resistance to wind load pressure (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1932 | ||
| 186 | Blinds E | Resistance to misuse Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12194 | ||
| 187 | Blinds E | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12835 | ||
| 188 | Blinds E | Operating force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13527 | ||
| 189 | Blinds E | Transmitted force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12045 | ||
| 190 | Blinds E | Hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13330 | ||
| 191 | Components of steel framed structures E | Geometrical characteristics Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14195 | ||
| 192 | Components of steel framed structures E | Dimensions: thickness, length, angular dimension, straightness, web width of the section, flange width, measurement of twist of the section Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14195 | ||
| 193 | Balcony, loggia and terrace enclosures E | Resistance to wind load pressure from (-5000 - 5000) Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Uniform load method | PB LK-139 EAD 020002-XX-0404 | PN-EN 12211 | |
| 194 | Balcony, loggia and terrace enclosures E | Resistance to soft and heavy body impact Range body with a mass of 50 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Impact strength method | PB LK-139 EAD 020002-XX-0404 | PN-EN 13049 | |
| 195 | Balcony, loggia and terrace enclosures E | Resistance to load in the plane of the leaf Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 020002-XX-0404 | PN-EN 14608 | ||
| 196 | Balcony, loggia and terrace enclosures E | Resistance to static torsion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 020002-XX-0404 | PN-EN 14609 | ||
| 197 | Balcony, loggia and terrace enclosures E | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Manual handling method | PB LK-139 | |
| 198 | Balcony, loggia and terrace enclosures E | Operating forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PB LK-139 | ||
| 199 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to static loads acting perpendicular to the plane of the leaf | Static load method | PB LZE-120/4/04-2018 | |
| 200 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Correct operation | PB LZE-078/9/04-2018 | PB LZE-120/4/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | ||
| 201 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Linear dimensions of door frames | Linear measurement method | PB LZE-078/9/04-2018 | PB LZE-122/3/04-2018 | PB LZE-123/3/04-2018 | |
| 202 | Doors, door sets, leaves, frames - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | ||||
| 203 | Gates E | Self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 204 | Gates E | Durability of self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 205 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to vertical loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 947 | ||
| 206 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Automatic method | PN-EN 1191 | |
| 207 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to wind load Pressure range (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12211 „N’’ | PN-EN 16361 | ||
| 208 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Range body with a mass of 50 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16361 | ||
| 209 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Range body with a mass of 50 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | PN-EN 13049 + PN-EN 12600 | ||
| 210 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1026 „N’’ | PN-EN 16361 | PN-EN 14351-2 | ||
| 211 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 212 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Operating forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-2 | PN-EN 16361 | ||
| 213 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Durability of self-closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16034 | ||
| 214 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Linear dimensions of door frames Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Linear measurement method | PN-EN 16361 | |
| 215 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Watertightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1027 „N’’ | PN-EN 16361 | ||
| 216 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Height and width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 16361 | ||
| 217 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Height Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 218 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 219 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Static torsional strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 948 | ||
| 220 | Doors, door sets, leaves, frames E - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - fire resistant - smoke tight - manually operated and power operated - with panic exit devices - on escape routes | Release capability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | PN-EN 179 | PN-EN 14351-2 | ||
| 221 | Windows E | Load-bearing capacity of safety devices Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-1 „N’’ | ||
| 222 | Windows E | Resistance to wind load Pressure range (–5000 - +5000) Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12211 „N’’ | ||
| 223 | Windows E | Air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1026 „N’’ | ||
| 224 | Windows E | Operating forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-1 | ||
| 225 | Windows E | Watertightness, Pressure up to 5000 Pa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1027 „N’’ | ||
| 226 | Building balustrades and handrails | Soft and heavy body impact resistance impact body – bag 30 kg | PB LZE-140/2/04-2019 | ||
| 227 | Building balustrades and handrails | Soft and heavy body impact resistance impact body – tyre 50 kg | PB LZE-140/2/04-2019 | ||
| 228 | Building balustrades and handrails | Resistance to static loads load up to 3 kN/m |
PB LZE-140/2/04-2019 | ||
| 229 | Building balustrades and handrails | Hard body impact resistance impact body - steel ball 0,5 kg | PB LZE-140/2/04-2019 | ||
| 230 | Building balustrades and handrails | Resistance to wind load | PB LZE-140/2/04-2019 | ||
| 231 | Building balustrades and handrails | Geometric dimensions | PB LZE-140/2/04-2019 | ||
| 232 | Gates | Self-closing | PN-EN 16034:2014 | ||
| 233 | Gates | Durability of self-closing | PN-EN 16034:2014 | ||
| 234 | Gates | Safety in use of power operated gates: Crushing, shearing and drawing-in hazard; Opening and closing forces; Detection of presence; Crushing and shearing hazard caused by the possibility of a person being carried along with the gate; Impact hazard; Manual operation; Verification of safety with regard to other hazards + Regulated area: + Tests performed at and outside the laboratory premises |
PN-EN 12453:2017 | ||
| 235 | Gates | Mechanical aspects: Design and construction; Protection against unintended or uncontrolled movement; Forces for manual operation; Manual operating devices – check/inspection of the location and safe design of handles with regard to the risk of crushing, trapping or cutting the hand; Finger protection; Verification of the special requirements for components used in suspension and balancing systems; Gangway doors - visual checks/inspections of the safe position, protection against unintended movement and threshold requirements; Warning signs and/or devices – check and visual inspection of the possibility of recognising dangerous places and hazards by means of warning signs/devices + Regulated area: + Tests performed at and outside the laboratory premises |
PN-EN 12604:2017 | ||
| 236 | Powered doors, door operators | Durability at extreme temperatures: from -30 °C to + 5 °C from +40 °C to +80 °C |
PN-EN 16005:2013 | ||
| 237 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Burglary resistance - static strength | PN-90/B-92270 cl. 3.3.3 to 3.3.11 and 3.4 and 3.5 | ||
| 238 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Self-closing | PN-EN 16034:2014 | ||
| 239 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Durability of self-closing | PN-EN 16034:2014 | ||
| 240 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 241 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Force needed to bolt the door | AAMA/WDMA/CSA 101/I.S.2/A440-22 | ||
| 242 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440-22+ ASTM E2068-00(2022) | ||
| 243 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 244 | Doors, door sets, leaves, frames including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 245 | Components made of metal and plastics | Torsion Torque Range (0 - 350) Nm |
PB LOW-008/5/07-2014 | ||
| 246 | Components made of metal and plastics | Bursting strength Range (0 - 100) kN |
PB LOW-002/5/07-2014 | ||
| 247 | Components made of metal and plastics | Compressive strength Range (0 - 100) kN |
PB LOW-003/5/07-2014 | ||
| 248 | Components made of metal and plastics | Flexural strength Range (0 - 100) kN |
PB LOW-004/5/07-2014 | ||
| 249 | Components made of metal and plastics | ||||
| 250 | Elements of metal skeleton structures | Coating thickness | PN-EN ISO 2808:2008 cl. 5.5.7 and 5.5.8 | ||
| 251 | Building equipment components | Operating force in the range (0 - 5000) N | PB LOW-012/6/07-2014 | ||
| 252 | Building equipment components | Operation of mechanisms, Torque Range (0 - 350) Nm |
PB LOW-008/5/07-2014 | ||
| 253 | Building equipment components | Linear and angular geometric dimensions Callipers, Range (0 - 400) mm Micrometers, Range (0 - 100) mm Rigid rules, Range (0 - 2000) mm Measuring tapes, Range (0 - 8) m Protractor, Range (0 - 360)° |
PB LOW-001/4/09-2007 | ||
| 254 | Building equipment components | Durability of mechanisms rotating about an axis with one- or two-directional forced movement | PB LOW-007/4/09-2007 | ||
| 255 | Building equipment components | Durability of mechanisms with reciprocating movement under a force perpendicular or parallel to the movement of the mechanism or along the axis of travel | PB LOW-006/4/09-2007 | ||
| 256 | Building equipment components | Durability of mechanisms converting rotary motion into reciprocating motion | PB LOW-005/4/09-2007 | ||
| 257 | Building equipment components | Bursting strength in the range (0 - 100) kN |
PB LOW-002/5/07-2014 | ||
| 258 | Building equipment components | Compressive strength in the range (0 - 100) kN |
PB LOW-003/5/07-2014 | ||
| 259 | Building equipment components | Flexural strength in the range (0 - 100) kN |
PB LOW-004/5/07-2014 | ||
| 260 | Padlocks | Durability | PN-EN 12320:2013-04 | ||
| 261 | Padlocks | Resistance to unconventional attacks | PB LZE-015/5/12-2019 | ||
| 262 | Mechatronic padlocks | Key strength | PN-EN 16864:2017-10 | ||
| 263 | Mechatronic padlocks | Operating moment | PN-EN 16864:2017-10 | ||
| 264 | Mechatronic padlocks | Stability of the key | PN-EN 16864:2017-10 | ||
| 265 | Mechatronic padlocks | Incorrect electronic code | PN-EN 16864:2017-10 | ||
| 266 | Mechatronic padlocks | Durability | PN-EN 16864:2017-10 | ||
| 267 | Mechatronic padlocks | Corrosion resistance | PN-EN 16864:2017-10 | ||
| 268 | Mechatronic padlocks | Resistance of the key to water | PN-EN 16864:2017-10 | ||
| 269 | Mechatronic padlocks | Key-related protection | PN-EN 16864:2017-10 | ||
| 270 | Mechatronic padlocks | Resistance to chisel attack | PN-EN 16864:2017-10 | ||
| 271 | Mechatronic padlocks | Resistance to attack by twisting off | PN-EN 16864:2017-10 | ||
| 272 | Mechatronic padlocks | Resistance to attack by pulling out | PN-EN 16864:2017-10 | ||
| 273 | Mechatronic padlocks | Resistance to attack by impact (manual) | PN-EN 16864:2017-10 | ||
| 274 | Mechatronic padlocks | Resistance to attack by vibration | PN-EN 16864:2017-10 | ||
| 275 | Mechatronic padlocks | Resistance to attack by increased voltage | PN-EN 16864:2017-10 | ||
| 276 | Mechatronic padlocks | Resistance to attack by magnetic field | PN-EN 16864:2017-10 | ||
| 277 | Drives for gates and doors | Safety in use | PN-EN 12445:2002 cl. 4.1, 4.2, 4.3, 4.4, 6,7 | ||
| 278 | Drives for gates and doors | Functionality | PN-EN 12605:2002 cl. 5.1, 5.4 | ||
| 279 | Drives for doors, gates and shutters | Operating force Range (0 - 5000) N |
PB LOW-012/6/07-2014 | ||
| 280 | Drives for doors, gates and shutters | Compressive strength | PB LOW-003/5/07-2014 | ||
| 281 | Building hardware and its components | Operation of force-loaded mechanisms, actuating force dynamometers (0 - 5000) N | PB LOW-012/6/07-2014 | ||
| 282 | Building hardware and its components | Operation of mechanisms Torque in the range (0-350) Nm |
PB LOW-008/5/07-2014 | ||
| 283 | Building hardware and its components | Linear and angular geometric dimensions Callipers, Range (0 - 400) mm Micrometers, Range (0 - 100) mm Rigid rules, Range (0 - 2000) mm Measuring tapes, Range (0 - 8) m Protractor, Range (0 - 360)° |
PB LOW-001/4/09-2007 | ||
| 284 | Building hardware and its components | Durability of mechanisms rotating about an axis with one- or two-directional forced movement | PB LOW-007/4/09-2007 | ||
| 285 | Building hardware and its components | Durability of mechanisms with reciprocating movement under a force perpendicular or parallel to the movement of the mechanism or along the axis of travel | PB LOW-006/4/09-2007 | ||
| 286 | Building hardware and its components | Durability of mechanisms converting rotary motion into reciprocating motion | PB LOW-005/4/09-2007 | ||
| 287 | Building hardware and its components | Bursting strength Range (0 - 100) kN |
PB LOW-002/5/07-2014 | ||
| 288 | Building hardware and its components | Compressive strength Range (0 - 100) kN |
PB LOW-003/5/07-2014 | ||
| 289 | Building hardware and its components | Flexural strength Range (0 - 100) kN |
PB LOW-004/5/07-2014 | ||
| 290 | Tilt-and-turn fittings, turn-and-tilt fittings, tilt fittings, turn fittings | Strength of the hardware under dynamic loads on impact against an obstacle | PN-EN 13126-8:2007 cl. 7.3.6, 7.3.7, 7.3.8 | ||
| 291 | Tilt-and-turn fittings, turn-and-tilt fittings, tilt fittings, turn fittings | Strength | PN-EN 13126-8:2007 cl. 7.3.5, 7.5 | ||
| 292 | Tilt-and-turn fittings, turn-and-tilt fittings, tilt fittings, turn fittings | ||||
| 293 | Plastics | Modulus of elasticity in tension type 2 and 5 | PN-EN ISO 527-3:1998 | ||
| 294 | Plastics | Hardness by the Shore method | PB LOW-T01/3/09-2007 | ||
| 295 | Cylinder locks | Resistance to unconventional attacks | PB LZE-015/5/12-2019 | ||
| 296 | Cylinder locks | Resistance to unconventional attacks | PN-91/B-94461/02 | ||
| 297 | Locks and strikes | Strength | PN-91/B-94408 cl. 6 | PN-91/B-94400 cl. 5.4 and 5.5 | ||
| 298 | Locks and strikes | Burglary protection | PN-91/B-94408 cl. 3 | PN-91/B-94400 cl. 5.4 and 5.5 | ||
| 299 | Locks and strikes | Strength of lock components Range (0 - 100) kN |
PN-EN 12209:2005+AC:2006 cl. 6.2, 6.8, 6.11.2 | ||
| 300 | Electromechanical locks and strikes | Strength of lock components Range (0 - 100) kN |
PN-EN 12209:2005+AC:2006 cl. 6.8 | ||
| 301 | Multipoint locks | Operation at extreme temperatures Range (-20 - +60)°C |
PN-EN 15685:2025-05 | ||
| 302 | Multipoint locks | Key identification | PN-EN 15685:2025-05 | ||
| 303 | Multipoint locks | Minimum return torque of the follower | PN-EN 15685:2025-05 | ||
| 304 | Multipoint locks | Torque of lock operation with clenching force | PN-EN 15685:2025-05 | ||
| 305 | Multipoint locks | Lock operating torque | PN-EN 15685:2025-05 | ||
| 306 | Multipoint locks | Protection against removal of the lock from the door | PN-EN 15685:2025-05 | ||
| 307 | Multipoint locks | Corrosion resistance | PN-EN 15685:2025-05 | ||
| 308 | Multipoint locks | Latch return force | PN-EN 15685:2025-05 | ||
| 309 | Multipoint locks | Door closing force on the latch | PN-EN 15685:2025-05 | ||
| 310 | Multipoint locks | Durability | PN-EN 15685:2025-05 | ||
| 311 | Multipoint locks | Key strength | PN-EN 15685:2025-05 | ||
| 312 | Multipoint locks | Strength of locking mechanisms (latch and bolt operation), Torque strength of the locked follower, Torque strength of locks with integrated locked lever handle/knob, Strength of follower stops, Strength of the latch under side load | PN-EN 15685:2025-05 | ||
| 313 | Multipoint locks | Securing of anti-separation points: projection of the bolt/bolts of anti-separation points resistance of anti-separation points to separation resistance of anti-separation points to drilling and separation resistance of anti-separation points to pull-out resistance of anti-separation points to drilling and pull-out resistance of the locking device in sliding door locks to forcing resistance to drilling and forcing of the retaining device in locks for sliding doors pull-out resistance of the coupling resistance of the strike plate to pull-off force |
PN-EN 15685:2025-05 | ||
| 314 | Multipoint locks | Securing of locking points: manual deadlocking without intermediate locking positions manual deadlocking with intermediate locking positions manual locking with multiple key turns effectiveness of automatic latch closing effectiveness of automatic bolt closing torque strength of the locked follower resistance of locking points and anti-separation points to side load resistance of locking points and anti-separation points to side load and drilling projection of the bolts of locking points resistance of locking points to separation resistance of locking points to drilling and separation strength of the key mechanism under torque for key-operated locks (strong wrench attack on locks with an internal blocking element) resistance of the box-protected coupling to frontal loads resistance of the box-protected coupling to lateral loads |
PN-EN 15685:2025-05 | ||
| 315 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 316 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440:22 | ASTM E2068-00(2022) | ||
| 317 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 318 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 319 | Windows including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 320 | Rooflights: - continuous, - point, - other | Air permeability at a specified pressure difference | ASTM E283/E283M-19 | ||
| 321 | Rooflights: - continuous, - point, - other | Operating forces | AAMA/WDMA/CSA 101/I.S.2/A440:22 | ASTM E2068-00(2022) | ||
| 322 | Rooflights: - continuous, - point, - other | Stiffness and strength under static pressure load | ASTM E330/E330M-14(2021) | ||
| 323 | Rooflights: - continuous, - point, - other | Watertightness under cyclic static pressure difference | ASTM E547-00(2016) | ||
| 324 | Rooflights: - continuous, - point, - other | Watertightness under static pressure difference | ASTM E331-00(2023) | ||
| 325 | Self-supporting metal sheets E | Yield strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 326 | Self-supporting metal sheets E | Thickness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 327 | Self-supporting metal sheets E | Water vapour permeability and air permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 328 | Self-supporting metal sheets E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 329 | Self-supporting metal sheets E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 330 | Self-supporting metal sheets E | Watertightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 331 | Self-supporting metal sheets E | Resistance to concentrated loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 332 | Gates E | Detection threshold Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12978 | ||
| 333 | Gates E | Resistance to wind load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12444 „N” | ||
| 334 | Gates E | Resistance to water penetration Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12489 „N” | ||
| 335 | Gates E | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12427 „N” | ||
| 336 | Gates E | Force on the edges Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12445 „N” | ||
| 337 | Gates E | Durability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 „N” | PN-EN 12604 „N” | ||
| 338 | Gates E | Functionality Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 „N” | PN-EN 12604 „N” | ||
| 339 | Gates E | Workmanship Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12605 „N” | PN-EN 12604 „N” | ||
| 340 | Gates E | Safety in use Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12445 | ||
| 341 | Gates E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 342 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to wind load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12211 „N” | ||
| 343 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13049 „N” | PN-EN 14351-2 + PN-EN 12600 | ||
| 344 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 949 | ||
| 345 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Burglar resistance - manual burglary attempt test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 346 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 347 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Burglar resistance under static loading Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 348 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1026 „N” | PN-EN 14351-2 | ||
| 349 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Watertightness Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1027 „N” | ||
| 350 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Release capability Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | PN-EN 179 | PN-EN 14351-2 | ||
| 351 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Height Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 352 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Width Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14351-2 | ||
| 353 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 951 | ||
| 354 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to vertical loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 947 | ||
| 355 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to static loads perpendicular to the plane of the leaf Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-87/B-06077 | ||
| 356 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1191 | ||
| 357 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Shock resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-88/B-06079 | ||
| 358 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Squareness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 951 | ||
| 359 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Force, torque Torque Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-2 | ||
| 360 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Operating forces Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12046-2 „N” | ||
| 361 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Static torsional strength Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 948 „N” | ||
| 362 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Load-bearing capacity of safety devices Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14351-1 | PN-EN 948 „N” | ||
| 363 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 949 | ||
| 364 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 950 | ||
| 365 | Doors, door sets, leaves, frames E including among others: - internal and external - side-hung - sliding - concertina - swing, - folding - revolving - manually operated and power operated - with panic exit devices - on escape routes | Overall and local flatness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 952 | ||
| 366 | Shower trays E | Resistance to temperature changes Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14527 | ||
| 367 | Shower trays E | Water drainage Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14527 | ||
| 368 | Shower trays E | Verification of resistance to chemical reagents and staining agents Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14527 | ||
| 369 | Shower trays E | Stability of the shower tray base Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14527 | ||
| 370 | Shower trays E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 251 | ||
| 371 | Loft ladders (stairs) E | Static load, cyclic load, step torsion, handrail strength, strength of stops, step strength, design features Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14975 | ||
| 372 | Sliding and folding doors, hardware for sliding and folding doors E | Static loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1527 | ||
| 373 | Sliding and folding doors, hardware for sliding and folding doors E | Friction force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1527 | ||
| 374 | Sliding and folding doors, hardware for sliding and folding doors E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1527 | ||
| 375 | Sliding and folding doors, hardware for sliding and folding doors E | Properties and characteristics for the assessment of safety in use Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | PB LOW-018 | ||
| 376 | Sliding and folding doors, hardware for sliding and folding doors E | Dimensions, distances between elements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 377 | Sliding and folding doors, hardware for sliding and folding doors E | Ground clearance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 378 | Sliding and folding doors, hardware for sliding and folding doors E | Opening and closing forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 379 | Sliding and folding doors, hardware for sliding and folding doors E | Door activation zone Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | PB LOW-018 | ||
| 380 | Sliding and folding doors, hardware for sliding and folding doors E | Durability (excluding tests at extreme temperatures) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | PB LOW-018 | ||
| 381 | Sliding and folding doors, hardware for sliding and folding doors E | Impact forces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 382 | Sliding and folding doors, hardware for sliding and folding doors E | Opening time Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 383 | Sliding and folding doors, hardware for sliding and folding doors E | Break-out force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | ||
| 384 | Sliding and folding doors, hardware for sliding and folding doors E | Opening forces and closing time under low-energy conditions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN EN 16005 | PB LOW-018 | ||
| 385 | Sliding and folding doors, hardware for sliding and folding doors E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 386 | Components of metal framed structures E | Coating thickness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 2178 | PN-EN ISO 2360 | ||
| 387 | Components of metal framed structures E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14195 | ||
| 388 | Building equipment components E | Workmanship Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13018 | ||
| 389 | Building equipment components E | Adhesion of the veneer to the substrate Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 311 | ||
| 390 | Building equipment components E | Hardness Range (20 - 70) HRC Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Rockwell | PN-EN ISO 6508-1 | |
| 391 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Stain resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 438-2 | ||
| 392 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Resistance to cigarette ember Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 438-2 | ||
| 393 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Resistance of main profiles to impact of a falling weight Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 477 | ||
| 394 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Thermal shrinkage Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 479 | ||
| 395 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Strength of welded corners and T-joints in range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 514 | ||
| 396 | Plastic fitting and finishing components, except profiles for the manufacture of windows and doors E | Appearance after heating at 150°C Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 478 | ||
| 397 | Shower enclosures E | Stability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14428 | ||
| 398 | Shower enclosures E | Leak tightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14428 | ||
| 399 | Shower enclosures E | Resistance to chemicals and staining agents Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14428 | ||
| 400 | Door handles and knobs with roses, window and balcony door handles E | Free play, Linear and angular geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 401 | Door handles and knobs with roses, window and balcony door handles E | Torque of the return mechanism Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 402 | Door handles and knobs with roses, window and balcony door handles E | Resistance to attack using a chisel Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 403 | Door handles and knobs with roses, window and balcony door handles E | Resistance to attack using drilling Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 404 | Door handles and knobs with roses, window and balcony door handles E | Free angular movement, misalignment Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 405 | Door handles and knobs with roses, window and balcony door handles E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 406 | Door handles and knobs with roses, window and balcony door handles E | Strength of the fastening elements Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 407 | Door handles and knobs with roses, window and balcony door handles E | Torque strength Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 408 | Door handles and knobs with roses, window and balcony door handles E | Axial strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 409 | Door handles and knobs with roses, window and balcony door handles E | Strength of the drum protecting plate Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 410 | Door handles and knobs with roses, window and balcony door handles E | Strength of the visor Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1906 | ||
| 411 | Door handles and knobs with roses, window and balcony door handles E | Corrosion resistance in neutral salt spray Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
NSS method | PN-EN ISO 9227 | |
| 412 | Door handles and knobs with roses, window and balcony door handles E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 413 | Handles E | Operating moment Range (0,99 - 30) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 414 | Handles E | Strength of the spindle-to-handle connection Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 415 | Handles E | Torsional strength (torque) Range (0 - 500) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 416 | Handles E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 417 | Handles E | Free play Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 418 | Handles E | Off-axis tensile strength Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 419 | Handles E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 420 | Window handles with keyless lock E | Operating moment Range (0,99 - 30) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 421 | Window handles with keyless lock E | Durability of the handle together with the locking device Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 422 | Window handles with keyless lock E | Free play Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 423 | Window handles with keyless lock E | Torsional strength Range (0 - 500) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 424 | Window handles with keyless lock E | Off-axis tensile strength Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 425 | Window handles with keyless lock E | Resistance to twisting off Range (0 - 300) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 426 | Window handles with keyless lock E | Resistance to forcing off Range (0 - 300) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 427 | Window handles with keyless lock E | Tensile strength of the pin Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 428 | Window handles with keyless lock E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 429 | Window handles with key lock E | Operating moment Range (0,99 - 30) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 430 | Window handles with key lock E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 431 | Window handles with key lock E | Free play Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 432 | Window handles with key lock E | Torsional strength (torque) Range (0 - 500) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 433 | Window handles with key lock E | Off-axis tensile strength Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 434 | Window handles with key lock E | Resistance to twisting off Range (0 - 300) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 435 | Window handles with key lock E | Resistance to forcing off Range (0 - 300) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 436 | Window handles with key lock E | Durability of the closing mechanism Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 437 | Window handles with key lock E | Torsional resistance of the locking mechanism Range (0 - 500) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 438 | Window handles with key lock E | Tensile strength of the pin Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-3 | ||
| 439 | Window handles with key lock E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 440 | Gratings E | Burglar resistance - manual burglary attempt test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 441 | Gratings E | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 442 | Gratings E | Burglar resistance under static loading Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 443 | Padlocks E | Burglary protection Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12320 | ||
| 444 | Metal beads, plaster corner beads and edging E | Coating thickness by the magnetic method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13658-1 | PN-EN 13658-2 | ||
| 445 | Metal beads, plaster corner beads and edging E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13658-1 | PN-EN 13658-2 | ||
| 446 | Drives for gates and doors E | Detection threshold Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12978 | ||
| 447 | Drives for gates and doors E | Force on the edges Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12445 | ||
| 448 | Drives for gates and doors E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12605 | ||
| 449 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to wind load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12211 „N” | ||
| 450 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 949 | PN-EN 13049 „N” | ||
| 451 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Burglar resistance - manual burglary attempt test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 452 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 453 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Burglar resistance under static loading Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 454 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to loads in the plane of the leaf Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14608 | ||
| 455 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Static torsional strength Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14609 „N” | ||
| 456 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Load-bearing capacity of safety devices Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14351-1 | PN-EN 14609 „N” | ||
| 457 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Resistance to repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1191 | ||
| 458 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1026 „N” | ||
| 459 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Force, torque Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-1 | ||
| 460 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Operating forces Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12046-1 | ||
| 461 | Windows E including: - balcony doors, - roof windows, - window-door sets, - similar constructions, - manually or power operated | Watertightness Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1027 „N” | ||
| 462 | Metal beads and special profiles for use with gypsum plasterboards E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14353 | ||
| 463 | Rivets up to 6.4 mm diameter E | Core breaking load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 14589 | ||
| 464 | Rivets up to 6.4 mm diameter E | Core push-out resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 14589 | ||
| 465 | Rivets up to 6.4 mm diameter E | Shear and tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 14589 | ||
| 466 | Rivets up to 6.4 mm diameter E | Ability to retain the core head Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 14589 | ||
| 467 | Building hardware and its components E | Workmanship Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13018 | ||
| 468 | Hardware for windows and balcony doors E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-15 | PN-EN 13126-16 | PN-EN 13126-17 | PN-EN 13126-7 | ||
| 469 | Hardware for windows and balcony doors E | Strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-17 | PN-EN 13126-7 | PN-EN 13126-15 | PN-EN 13126-16 | ||
| 470 | Hardware for windows and balcony doors E | Safety and operation of hardware for tilt-and-slide windows and balcony doors Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-17 | ||
| 471 | Hardware for windows and balcony doors E | Safety and operation of hardware for lift-and-slide windows and balcony doors Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-16 | ||
| 472 | Hardware for windows and balcony doors E | Safety and operation of rollers for horizontally sliding and folding windows and balcony doors Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-15 | ||
| 473 | Hardware for windows and balcony doors E | Safety and functionality of latch bolts Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-7 | ||
| 474 | Tilt-and-turn fittings, turn-and-tilt fittings, tilt fittings, turn fittings E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-8 | ||
| 475 | Tilt-and-turn fittings, turn-and-tilt fittings, tilt fittings, turn fittings E | Strength of the stay arm and corner hinge Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-8 | ||
| 476 | Welded steel wire panels for fencing E | Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 10218-1 | ||
| 477 | Welded steel wire panels for fencing E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 10218-2 | ||
| 478 | Welded steel wire panels for fencing E | Shear strength of the weld Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 10223-7 | ||
| 479 | Door frames E | Resistance to soft and heavy body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 949 | ||
| 480 | Continuous rooflights E | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | ||
| 481 | Continuous rooflights E | Mechanical properties Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | ||
| 482 | Continuous rooflights E | Watertightness Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14963 „N” | ||
| 483 | Continuous rooflights E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 484 | Vertical building elements E | Impact resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-93/B-10027 | ||
| 485 | Adhesive-bonded joints E | Peel resistance at 90 degrees Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 28510-1 | ||
| 486 | Secure storage rooms and units for valuables E | Resistance to attack using tools Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14450 | ||
| 487 | Secure storage rooms and units for valuables E | Mechanical strength of anchoring Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14450 | ||
| 488 | Secure storage units and rooms - mechanical locks of HSL type E | Codability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1300 | ||
| 489 | Secure storage units and rooms - mechanical locks of HSL type E | Tamper resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1300 | ||
| 490 | Secure storage units and rooms - mechanical locks of HSL type E | Resistance to destructive burglary Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1300 | ||
| 491 | Secure storage units and rooms - mechanical locks of HSL type E | Shock resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1300 | ||
| 492 | Secure storage units and rooms - mechanical locks of HSL type E | Repeatability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1300 | ||
| 493 | Coatings E | Coating thickness + Minitest Range (0 - 500) μm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Magnetic method | PN-EN ISO 2178 | PN-EN ISO 2360 | PN-EN ISO 2808 | |
| 494 | Coatings E | Corrosion resistance in neutral salt spray. NSS method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 495 | Coatings E | Resistance to detachment from the substrate Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Cross-cut method with disc knives with a blade spacing of 1 mm, 2 mm, 3 mm. | PN-EN ISO 2409 | |
| 496 | Coatings E | Bending Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 1519 | ||
| 497 | Manually operated ball valves for water supply installations E | Driving torque Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 498 | Manually operated ball valves for water supply installations E | Torsional and flexural strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 499 | Manually operated ball valves for water supply installations E | Strength of stops Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 500 | Manually operated ball valves for water supply installations E | Hydraulic tightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 501 | Manually operated ball valves for water supply installations E | Hydraulic strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 502 | Manually operated ball valves for water supply installations E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13828 | ||
| 503 | Injection-moulded thermoplastic pipes and fittings E | Impact resistance Type d25 and d90 Range up to 3,2 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Falling weight method | PN-EN 744 | |
| 504 | Injection-moulded thermoplastic pipes and fittings E | Impact resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 607 | ||
| 505 | Injection-moulded thermoplastic pipes and fittings E | Tensile mechanical properties Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6259-1 | ||
| 506 | Injection-moulded thermoplastic pipes and fittings E | Changes after heating Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 580 | ||
| 507 | Injection-moulded thermoplastic pipes and fittings E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 508 | Step irons for manholes E | Thickness of the plastic coating Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 509 | Step irons for manholes E | Impact resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 510 | Step irons for manholes E | Resistance to vertical load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 511 | Step irons for manholes E | Load resistance of grey cast iron steps Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 512 | Step irons for manholes E | Pull-out strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 513 | Step irons for manholes E | Warping Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13101 | ||
| 514 | Curtain walling E | Burglary resistance – manual burglary attack test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 515 | Curtain walling E | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 516 | Curtain walling E | Burglar resistance under static loading Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 517 | Rooflights, continuous rooflights, roof hatches E | Burglary resistance – manual burglary attack test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PB LOW-019 | PN-EN 1630 | ||
| 518 | Rooflights, continuous rooflights, roof hatches E | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PB LOW-019 | PN-EN 1629 | ||
| 519 | Rooflights E | Mechanical properties Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” EAD 220021-00-0402 | ||
| 520 | Rooflights E | Air permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” EAD 220021-00-0402 | ||
| 521 | Rooflights E | Watertightness Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” EAD 220021-00-0402 | ||
| 522 | Eaves gutter brackets E | Load-bearing capacity Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1462 | ||
| 523 | Brackets for piping systems used for rainwater drainage E | Strength of handles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12095 | ||
| 524 | Washbasins E | Overfill protection Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14688 | ||
| 525 | Washbasins E | Resistance to chemical reagents Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14688 | ||
| 526 | Washbasins E | Resistance to temperature changes Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14688 | ||
| 527 | Washbasins E | Water drainage Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14688 | ||
| 528 | Washbasins E | Cleanability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14688 | ||
| 529 | Gaskets and sealing tapes E | Linear compressive force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12365-2 | ||
| 530 | Gaskets and sealing tapes E | Recovery after deformation following accelerated ageing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12365-4 | ||
| 531 | Gaskets and sealing tapes E | Recovery after deformation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12365-3 | ||
| 532 | Baths E | Resistance to chemical agents Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 198 | PN-EN 14516 | ||
| 533 | Baths E | Resistance to mechanical impacts Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 198 | PN-EN 14516 | ||
| 534 | Baths E | Resistance to temperature changes Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 198 | PN-EN 14516 | ||
| 535 | Baths E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 536 | Mechatronic cylinders E | Operating forces and torques Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 537 | Mechatronic cylinders E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 538 | Mechatronic cylinders E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 539 | Mechatronic cylinders E | Resistance to torque Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 540 | Mechatronic cylinders E | Resistance to drilling Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 541 | Mechatronic cylinders E | Resistance to chisel attack Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 542 | Mechatronic cylinders E | Resistance to attack by twisting off Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 543 | Mechatronic cylinders E | Resistance to attack by pulling out Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 544 | Mechatronic cylinders E | Resistance to attack by impact (manual) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 545 | Mechatronic cylinders E | Resistance to attack by vibration Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 546 | Mechatronic cylinders E | Resistance to attack by increased voltage Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 547 | Mechatronic cylinders E | Resistance to attack by magnetic field Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 548 | Mechatronic cylinders E | Strength of the electronic key Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 549 | Mechatronic cylinders E | Resistance of the electronic key to free fall Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 550 | Mechatronic cylinders E | Resistance of the electronic key to water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15684 | ||
| 551 | Cylinders E | Operation of the safety mechanism Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 552 | Cylinders E | Operation at extreme temperatures Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 553 | Cylinders E | Resistance of the cylinder/cylinder plug to torque Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 554 | Cylinders E | Resistance to attack by twisting off Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 555 | Cylinders E | Resistance to attack by cylinder/cylinder plug extraction Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 556 | Cylinders E | Resistance to attack using a chisel Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 557 | Cylinders E | Resistance to attack by drilling Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 558 | Cylinders E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 559 | Cylinders E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 560 | Cylinders E | Key strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 561 | Cylinders E | Key-related protection Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1303 | ||
| 562 | Screws E | Torsion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666 | ||
| 563 | Screws E | Torsional strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 2702 | ||
| 564 | Screws E | Screwing-in capability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 2702 | ||
| 565 | Screws E | Thread forming capability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 2702 | ||
| 566 | Screws E | Drilling and screwing-in capability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666 | ||
| 567 | Flexible plastic products E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 24341 | PN-EN ISO 24342 | PN-EN ISO 24346 | ||
| 568 | Flexible plastic products E | Flatness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 24342 | PN-EN ISO 24341 | ||
| 569 | Flexible plastic products E | Straightness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 24341 | PN-EN ISO 24342 | ||
| 570 | Flexible plastic products E | Determination of the mass per unit area Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 23997 | ||
| 571 | Locks and strikes E | Operation at extreme temperatures Range (-20 - +60)°C Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 572 | Locks and strikes E | Torque to operate the bolt Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 573 | Locks and strikes E | Torque to retract the latch with the handle Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 574 | Locks and strikes E | Key identification Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 575 | Locks and strikes E | Minimum return torque of the follower Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 576 | Locks and strikes E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 577 | Locks and strikes E | Key strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 578 | Locks and strikes E | Latch return force Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 579 | Locks and strikes E | Torque to retract the latch with a key in lever locks Range (0 - 350) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 580 | Locks and strikes E | Manual closing force with an intermediate locking position Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 581 | Locks and strikes E | Door closing force on the latch Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 582 | Locks and strikes E | Manual closing force Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 583 | Locks and strikes E | Effectiveness of automatic latch closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 584 | Locks and strikes E | Effectiveness of automatic bolt closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 585 | Locks and strikes E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 586 | Locks and strikes E | Resistance of the hook to disengagement Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 587 | Locks and strikes E | Resistance to forcing of the locking device in locks for sliding doors Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 588 | Locks and strikes E | Strength of the bolt mechanisms Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 589 | Locks and strikes E | Protection: key operation and deadlocking resistance of the handle or knob to torque resistance of the bolt to side loads measurement of bolt projection resistance of the bolt to end loads resistance of the hook to disengagement resistance of the locking device in sliding door locks to forcing resistance to torque of a bolt operated by a handle or knob strong attack with a wrench on locks with an internal blocking element resistance of the box-protected coupling to frontal loads resistance of the box-protected coupling to lateral loads pull-out resistance of the coupling resistance of the strike plate to pull-out force key-related security in lever locks Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 590 | Locks and strikes E | Protection against removal from the door Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 591 | Electromechanical locks and strikes E | Resistance of the latch to side load Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 592 | Electromechanical locks and strikes E | Torque required to operate the deadbolt Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 593 | Electromechanical locks and strikes E | Torque required to operate the latch Range (0 - 300) Nm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 594 | Electromechanical locks and strikes E | Strength of the latch mechanism and stops Range (0 - 100) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 595 | Electromechanical locks and strikes E | Closing force Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12209 | ||
| 596 | Electromechanical locks and strikes E | Resistance of the locked follower to torque, Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14846 | PN-EN 12209 | ||
| 597 | Electromechanical locks and strikes E | Corrosion resistance testing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14846 | ||
| 598 | Emergency exit devices E | Construction Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 599 | Emergency exit devices E | Operation at extreme temperatures Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 600 | Emergency exit devices E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 601 | Emergency exit devices E | Resistance to misuse Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 602 | Emergency exit devices E | Re-engagement force Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 603 | Emergency exit devices E | Release force, Range Release force, Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 604 | Emergency exit devices E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 179 | ||
| 605 | Emergency exit devices E | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| 606 | Panic exit devices E | Construction Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 607 | Panic exit devices E | Resistance to corrosion and operation at extreme temperatures Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 608 | Panic exit devices E | Resistance to misuse Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 609 | Panic exit devices E | Re-engagement force Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 610 | Panic exit devices E | Release force Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 611 | Panic exit devices E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 612 | Panic exit devices E | Protection Range (0 - 5000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1125 | ||
| 613 | Controlled door closing devices E | Mechanical requirements and durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1154 | ||
| 614 | Controlled door closing devices E | Operation at extreme temperatures Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1154 | ||
| 615 | Controlled door closing devices E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1154 | ||
| 616 | External curtains and blinds E | Resistance to wind load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1932 | ||
| 617 | Espagnolettes E | Corrosion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-4 | ||
| 618 | Espagnolettes E | Resistance of the locking device Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-4 | ||
| 619 | Espagnolettes E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13126-4 | ||
| 620 | Hinges E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1935 EAD 020001-XX-0405 | ||
| 621 | Hinges E | Resistance to static load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1935 EAD 020001-XX-0405 | ||
| 622 | Hinges E | Shear strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1935 EAD 020001-XX-0405 | ||
| 623 | Hinges E | Initial frictional torque Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1935 | ||
| 624 | Sinks E | Resistance to chemicals and staining agents Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 625 | Sinks E | Resistance to heat in the dry test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 626 | Sinks E | Resistance to loads Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 627 | Sinks E | Resistance to temperature changes Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 628 | Sinks E | Water drainage Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 629 | Sinks E | Determination of the discharge capacity of a weir Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 630 | Sinks E | Durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | ||
| 631 | Sinks E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13310 | PN-EN 695 | ||
| 632 | Blinds and curtains E | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13330 | ||
| 633 | Blinds and curtains E | Burglar resistance - manual burglary attempt test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1630 | ||
| 634 | Blinds and curtains E | Burglar resistance under dynamic load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1629 | ||
| 635 | Blinds and curtains E | Burglar resistance under static loading Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1628 | ||
| 636 | Blinds and curtains E | Resistance to misuse Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12194 | ||
| 637 | Blinds and curtains E | Force at tension Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13527 | ||
| 638 | Blinds and curtains E | Force at pull-in Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13527 | ||
| 639 | Blinds and curtains E | Mechanical durability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14201 | ||
| 640 | Power operated blinds and curtains E | Static force exerted by the closing edge of a shutter or blind Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12045 | ||
| 641 | Roller blinds for roof and veranda windows E | Resistance to snow load Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12833 | ||
| Building Physics, Acoustics and Environment Laboratory (LZF) | |||||
| 642 | Porous materials | Airflow resistance in the range Rs = (0 - 10) kPa s/m, r = (0 - 100) kPa s/m2 | Laboratory method | PN-EN 29053:2011 | |
| 643 | Porous materials | Airflow resistance in the range Rs = (0 - 10) kPa s/m, σ= (0 - 100) kPa s/m2 | Laboratory method | PN-EN ISO 9053-1:2019-01 | |
| 644 | Floors | Reduction of impact sound by floor coverings on a reference floor Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) |
Laboratory method | PN-EN ISO 140-8:1999 | |
| 645 | Rooms in a building (all) | Sound level (in the building) Range (22 - 137) dB in situ |
PN-87/B-02156 (without cl. 6.3) | ||
| 646 | Floors | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN 20140-3:1999 „N” | |
| 647 | Floors | Sound insulation airborne between rooms Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN ISO 140-4:2000 | ||
| 648 | Floors | Impact sound insulation of floors Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN ISO 140-7:2000 | ||
| 649 | Floors | Impact sound insulation of floors Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
Laboratory method | * | PN-EN ISO 140-6:1999 | |
| 650 | Internal walls and their components: internal doors | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN 20140-3:1999 „N” | |
| 651 | Internal walls and their components: internal doors | Sound insulation airborne between rooms Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN ISO 140-4:2000 | ||
| 652 | External walls and their components: gates (industrial, garage), external doors, windows | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN 20140-3:1999 „N” | |
| 653 | External walls and their components: gates (industrial, garage), external doors, windows | Airborne sound insulation of external partitions and their components Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN ISO 140-5:1999 | ||
| 654 | Glass panes | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN 20140-3:1999 „N” | |
| 655 | Gates | Thermal transmittance. Calculation test method. ≥ 0,2 W/ (m2K) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12428:2013-06 „N” | ||
| 656 | Windows or rooflights projecting beyond the face of the building envelope | Thermal transmittance Range (0,2 - 3,0) W/(m2 K) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 12567-2:2006 „N” | PN-EN ISO 8990:1998 | PN-EN 1873:2009 cl. 5.9 „N” | ||
| 657 | Windows with air inlets - at various inclinations, external air inlets for rooms | Flow characteristics air flow (0,48 - 251) m3/h, pressure difference up to 400 Pa Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN 13141-1:2019-03, cl. 5.1, 5.2, 5.3 | ||
| 658 | Containerised and/or site-assembled wastewater treatment plants | Treatment efficiency - wastewater Biochemical oxygen demand BOD5 Range (1 - 6000) mg/l O2 Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Electrochemical method | PN-EN 12566-3:2016-10 „N” | PN-EN ISO 5815-1:2019-12 | |
| 659 | Luminous bands | Thermal transmittance Calculation test method ≥ 0,2 W/ (m2K) Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 14963:2006 „N” | ||
| 660 | Air in rooms of: residential buildings, public utility buildings, workplaces | Sampling for in situ testing | PB LZF 002/4/04-2022 | ISO 16000-6:2021 | ISO 16000-3:2022 | ||
| 661 | Construction products of chemical origin | Emission of ammonia Range (0,03 - 6) mg/m3 |
Spectrophotometric method | PN-EN 16516+A1:2020-12 | PN ISO 7150-1:2002 | |
| 662 | Thermal insulation products for building equipment and industrial installations (aqueous extracts) | Chloride concentration Range (0,01 - 10) mg/l Chloride content (calculated) Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Ion chromatography with conductometric detection (IC-CD) | PN-EN 13468:2004 „N” | PN-EN ISO 12624:2023-02 | PN-EN ISO 10304-1:2009 | PN-EN ISO 10304-1:2009/AC:2012 | |
| 663 | Thermal insulation products for building equipment and industrial installations (aqueous extracts) | Fluoride concentration Range (0,01 - 10) mg/l Fluoride content (calculated) Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Ion chromatography with conductometric detection (IC-CD) | PN-EN 13468:2004 „N” | PN-EN ISO 12624:2023-02 | PN-EN ISO 10304-1:2009 | PN-EN ISO 10304-1:2009/AC:2012 | |
| 664 | Thermal insulation products for building equipment and industrial installations (aqueous extracts) | Silicate concentration Range (0,03 - 5) mg/l Silicate content (calculated) Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Spectrophotometric method | PN-EN 13468:2004 „N” | PN-EN ISO 12624:2023-02 | ISO 10136-1:1993 | |
| 665 | Thermal insulation products for building equipment and industrial installations (aqueous extracts) | pH Range 2,0 - 12,0 Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Potentiometric method | PN-EN 13468:2004 „N” | PN-EN ISO 12624:2023-02 | PN-EN ISO 10523:2012 | |
| 666 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Water absorption by long-term immersion in kg/m2 - range: unlimited, in % (m3/m3) Range < 100 Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12087:2013-07 Methods 1A, 1B, 2A and 2B „N” | PN-EN ISO 16535:2019-08 Methods 1A, 1B, 2A and 2B „N” | ||
| 667 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thermal resistance Range > 0,05 m2·K/W Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12939:2002 cl. 1-6 „N” | ||
| 668 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thermal conductivity Range (0,015 - 0,060) W/(m·K) Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
* | PN-EN 12939:2002 cl. 1-6 | ||
| 669 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Short-term water absorption by partial immersion of the specimen Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 1609:2013-07 „N” | ||
| 670 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Length and width, Linear geometric dimensions Range (0 - 2000) mm Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12085:2013-07 | PN-EN 822:2013-07 „N” | ||
| 671 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thickness Range (0 - 500) mm Regulated area: "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 823:2013-07 | PN-EN 12085:2013-07 „N” | ||
| 672 | Thermal insulation materials and products, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Apparent density Range 12000 g Regulated area: Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the * symbol |
Gravimetric method | * | PN-EN 1602:2013-07 | |
| 673 | Ventilation elements and other objects with an area of less than 1 m2 E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible for 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN 20140-10 | PN-EN ISO 10140-2 | |
| 674 | Road traffic screens E | Airborne sound insulation Frequency range (100 - 5000) Hz Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Laboratory method | PN-EN 1793-2 „N” | PN-EN 1793-3 „N” | |
| 675 | Road traffic screens E | Sound absorption coefficient Frequency range (100 - 5000) Hz Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Laboratory method | PN-EN 1793-1 „N” | PN-EN 1793-3 „N” | |
| 676 | Sound-absorbing materials, Interior fittings and equipment, Sound-absorbing systems E | Sound absorption coefficient in a reverberation chamber Frequency range (100 - 5000) Hz Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Laboratory method | PN-EN ISO 354 „N” excluding cl. 7.3.1 | |
| 677 | Resilient materials (used e.g. in floating floors) E | Dynamic stiffness Range (0,2 - 200) MN/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Laboratory method | PN-EN 29052-1 | |
| 678 | Floors E | Reduction of impact sound by floor coverings on a reference floor Frequency range (100 - 5000) Hz (measurement possible for 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Laboratory method | PN-EN ISO 10140-3 | |
| 679 | Rooms in a building (all) E | A-weighted sound level (in the building) Range (22 - 137) dB in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 16032 | PN-EN ISO 10052 | ||
| 680 | Building partitions and their components E | Airborne and impact sound insulation Frequency range (100 - 5000) Hz (measurement possible for 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Laboratory method, characteristic/method | PN-EN ISO 10140-2 „N” | PN-EN ISO 10140-3 „N” | |
| 681 | Floors E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 „N” | |
| 682 | Floors E | Airborne sound insulation between rooms Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 10052 | ||
| 683 | Floors E | Impact sound insulation of floors Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-3 | |
| 684 | Floors E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-3 | |
| 685 | Floors E | Impact sound insulation of floors Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 16283-2 | ||
| 686 | Internal walls and their elements E | Airborne sound insulation between rooms Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
"In situ" method | * | PN-EN ISO 16283-1 | |
| 687 | Internal walls and their components: internal doors E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 „N” | |
| 688 | Internal walls and their components: internal doors E | Improvement of airborne sound insulation of building elements (internal walls) Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 | |
| 689 | Internal walls and their components: internal doors E | Airborne sound insulation between rooms Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 10052 | ||
| 690 | External walls and their components: gates (industrial, garage), external doors, windows E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 „N” | |
| 691 | External walls and their components: gates (industrial, garage), external doors, windows E | Improvement of airborne sound insulation of building elements (internal walls) Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 | |
| 692 | Glass panes E | Airborne sound insulation of building elements Frequency range (100 - 5000) Hz (measurement possible at 50, 63 and 80 Hz) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
Laboratory method | * | PN-EN ISO 10140-2 „N” | |
| 693 | Doors E | Thermal transmittance Calculation test method Range (0,2 - 3,0) W/(m2 K) Thermal transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 694 | Doors E | Calculation test method Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 10077-2 „N” | ||
| 695 | Doors E | Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 10077-1 „N” | PN-EN 14351-1 „N” | ||
| 696 | Doors E | Thermal transmittance Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 12567-1 „N” | PN-EN ISO 8990 | PN-EN 14351-1 „N” | ||
| 697 | Reflective insulation E | Thermal resistance Range ≥ 0,1 m2K/W Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12667 | ||
| 698 | Building components and building elements E | Hygrothermal performance properties. Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15026 | ||
| 699 | Building components and building elements E | Calculation test method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15026 | ||
| 700 | Components with flat surfaces and little variation in thermal properties E | Thermal resistance Calculation test method Range ≥ 0,1 m2K/W Thermal resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10211 | PN-EN ISO 6946 | ||
| 701 | Components with flat surfaces and little variation in thermal properties E | Calculation test method Range ≥ 0,1 m2K/W Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10211 | PN-EN ISO 6946 | ||
| 702 | Building materials and products E | Thermal resistance/Thermal conductivity Range (0,1 - 7,0) m2K/W Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12667 „N” | PN-EN 12664 | PN-EN ISO 10456 | ||
| 703 | Masonry of bricks, hollow blocks etc. E | Thermal resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1745 | ||
| 704 | Masonry of bricks, hollow blocks etc. E | Calculation test method Range > 0,1 m2·K/W Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1745 | ||
| 705 | Windows with air inlets - with various inclinations, outdoor air inlets for rooms E | Watertightness Pressure difference range up to 1000 Pa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 13141-1 | PN-EN 1027 | ||
| 706 | Windows E | Thermal transmittance Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 12567-1 „N” | PN-EN ISO 8990 | PN-EN 14351-1 „N” | ||
| 707 | Windows E | Thermal transmittance Calculation test method Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 10077-2 „N” | PN-EN ISO 10077-1 „N” | PN-EN 14351-1 „N” | ||
| 708 | Roof windows E | Thermal transmittance Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 12567-2 „N” | PN-EN ISO 8990 | PN-EN 14351-1 „N” | ||
| 709 | Roof windows E | Thermal transmittance Calculation test method Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 10077-2 „N” | PN-EN ISO 10077-1 „N” | PN-EN 14351-1 „N” | ||
| 710 | Windows or skylights projecting beyond the face of the partitions E | Thermal transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 711 | Windows or skylights projecting beyond the face of the partitions E | Calculation test method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10211 | ||
| 712 | Windows or skylights projecting beyond the face of the partitions E | Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1873 „N” | ||
| 713 | Self-supporting double skin metal faced sandwich panels E | Thermal transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 14509 * | ||
| 714 | Self-supporting double skin metal faced sandwich panels E | Calculation test method Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14509 | ||
| 715 | Window and door frames E | Thermal transmittance Range (0,2 - 3,0) W/(m2 K) Thermal transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 716 | Window and door frames E | Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12412-2 | PN-EN ISO 8990 | ||
| 717 | Sections of window and door frames, their connections with glazing, shutters, shutter boxes E | Thermal transmittance Calculation test method Range (0,2 - 3,0) W/(m2 K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 10077-2 „N” | PN-EN ISO 10211 | PN-EN 14351-1 „N” | ||
| 718 | Curtain walling E | Thermal transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 12631 * | ||
| 719 | Curtain walling E | Calculation test method ≥ 0,1 W/ (m2 K) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 12631 | ||
| 720 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Water absorption by long-term diffusion, W kg/m2 - range: unlimited, in % (m3/m3) – range: < 100 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12088 „N” | ||
| 721 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Length and width, Linear geometric dimensions Range (0 - 2000) mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 29768 | PN-EN ISO 29465 „N” | ||
| 722 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thickness Range (0 - 500) mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN ISO 29768 | PN-EN ISO 29466 „N” | ||
| 723 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Apparent density Range 12000 g Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 29470 | |
| 724 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Short-term water absorption by Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 725 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | partial immersion of the specimen Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 29767 „N” | ||
| 726 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thermal resistance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 727 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Range > 0,05 m2·K/W Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12667 „N” | ||
| 728 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Water vapour transmission Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 12086 „N” | ||
| 729 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Thermal conductivity Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | ||
| 730 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Range (0,015 - 0,060) W/(m·K) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12667 „N” | ||
| 731 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Dimensional stability under specified Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 1604 * | ||
| 732 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | temperature and humidity conditions temperature: (-40 - 180) °C relative humidity (10 - 98) % Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 733 | Thermal insulation materials and products E, including: - expanded cork products (ICB) - expanded perlite products (EPB) - phenolic foam products (PF) - extruded polystyrene products (XPS) - wood wool products (WW) - mineral wool products (MW) - wood fibre products (WF) - expanded polystyrene products (EPS) - cellular glass products (CG) - rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products | Dimensional stability under constant normal laboratory conditions temperature: (23 ± 2) °C relative humidity (50 ± 5) % Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. Tests based on the results of which the laboratory formulates opinions and interpretations are marked with the symbol * |
* | PN-EN 1603 | ||
| 734 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency OLM range up to 50 also in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-3 „N” | ||
| 735 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Biochemical oxygen demand BOD5 Range (3 - 1200) mg/l O2 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Titrimetric method | PN-EN 1899-1 „N” | |
| 736 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Chemical oxygen demand COD-Cr Range (30 - 7000) mg/l Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Titrimetric method | PN-ISO 6060 „N” | |
| 737 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Chemical oxygen demand Range (5 - 10000) mg/l Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Spectrophotometric method | PN-ISO 15705 „N” | |
| 738 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Total suspended solids Range (2,0 - 500) mg/l Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 872 | |
| 739 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Total phosphorus concentration Range (0,30 - 14,0) mg/l Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Spectrophotometric method | PN-EN ISO 6878 | |
| 740 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater pH Range (3,0 - 10,0) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Potentiometric method | PN-EN ISO 10523 | |
| 741 | Packaged and/or site assembled wastewater treatment plants E | Treatment efficiency - wastewater Electrical conductivity Range (0,1 - 2) mS/cm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Conductometric method | PN EN 27888 | |
| 742 | Packaged and/or site assembled wastewater treatment plants E | Watertightness also in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-3 „N” | ||
| 743 | Prefabricated septic tanks E | Hydraulic capacity Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-1 „N” | ||
| 744 | Prefabricated septic tanks E | Tightness and nominal capacity also in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-1 „N” | ||
| 745 | High-pressure decorative laminates (HPL) E, Resilient, textile and laminate floor coverings E, Wood and wood-based products E, including: - Wood-based panels - Wooden floors | Formaldehyde emission under dynamic conditions (small chamber) Range (0,005 - 15) mg/m3 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Spectrophotometric method (chamber) | PN-EN 717-1 „N” | ISO 16000-3 „N” | |
| 746 | High-pressure decorative laminates (HPL) E, Resilient, textile and laminate floor coverings E, Wood and wood-based products E, including: - Wood-based panels - Wooden floors | Pentachlorophenol content Range (0,025 - 25) mg/kg Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gas chromatography with electron capture detection (GC- ECD) | Report CEN/TR 14823 „N” | |
| 747 | Suspended ceiling components E | Formaldehyde emission under dynamic conditions (small chamber) Range (0,005 - 15) mg/m3 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Spectrophotometric method (chamber) | PN-EN 717-1 „N” | ISO 16000-3 „N” | |
| 748 | Indoor air in: residential buildings, public utility buildings, workplaces E | Concentration of formaldehyde, acetaldehyde, propionaldehyde, butyraldehyde Range (1 - 1000) μg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | ISO 16000-3 | |
| 749 | Indoor air in: residential buildings, public utility buildings, workplaces E | Concentration of volatile organic compounds Range (1 - 100) μg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Thermal desorption gas chromatography with mass spectrometry detection (TD-GC-MS) | ISO 16000-6 | |
| 750 | Construction products of chemical origin E | Emission of formaldehyde, acetaldehyde, propionaldehyde and butyraldehyde under dynamic conditions (small chamber) Range (1 - 1000) μg/m3 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
High-performance liquid chromatography with spectrophotometric detection (HPLC-UV) | ISO 16000-3 „N” | PN-EN ISO 16000-9 „N” | PN-EN 16516 „N” | |
| 751 | Construction products of chemical origin E | Emission of volatile organic compounds under dynamic conditions (small chamber) Range (0,5 - 2000) μg/m3 Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Thermal desorption gas chromatography with mass spectrometry detection (TD-GC-MS) | ISO 16000-6 „N” | PN-EN ISO 16000-9 „N” | PN-EN 16516 „N” | |
| Building Physics, Acoustics and Environment Laboratory (LZF); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice | |||||
| 752 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Short-term water absorption by partial immersion of the specimen, Range up to 3000 g Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Gravimetric method | PN-EN 1609:2013-07 „N” | |
| 753 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Water absorption by long-term immersion Range up to 3000 g Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Gravimetric method | PN-EN 12087:2013-07 „N” | |
| 754 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Apparent density, Range up to 3000 g | Gravimetric method | PN-EN 1602:2013-07 | |
| 755 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Freeze–thaw resistance - range down to -20°C, Range from 5 N to 50 000 N | PN-EN 12091:2013-07 | ||
| 756 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Compression test | PN-EN 12091:2013-07 | ||
| 757 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Flatness Range up to 30 mm |
PN-EN 825:2013-07 | ||
| 758 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Linear geometric dimensions | PN-EN 822:2013-07 | ||
| 759 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Range up to 3000 mm Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 823:2013-07 „N” | ||
| 760 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Behaviour in compression Range from 5 N to 50 000 N Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 826:2013-07 „N” | ||
| 761 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Compression test Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 826:2013-07 „N” | ||
| 762 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Linear geometric dimensions Range up to 1000 mm |
PN-EN 13467:2018-2 | ||
| 763 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Apparent density of pipe sections Range up to 3000 g |
Gravimetric method | PN-EN 13470:2003 | |
| 764 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Water absorption of pipe sections by short-term partial immersion Range up to 3000 g Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Gravimetric method with partial immersion | PN-EN 13472:2013-04 „N” | |
| 765 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF | Water vapour transmission properties Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 13469:2013-04 „N” | ||
| 766 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Short-term water absorption by partial immersion of the specimen, Range up to 3000 g Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN ISO 29767 „N” | |
| 767 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Water absorption by long-term immersion Range up to 3000 g Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN ISO 16535 „N” | |
| 768 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Deformation under a compressive load of 20 kPa at a temperature of 80°C and under a compressive load of 40 kPa at a temperature of 70°C Range up to 100 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1605 | ||
| 769 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Compression test under constant load at temperature Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1605 | ||
| 770 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Thermal resistance and related properties, Range from 0,5 m2K/W Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Guarded hot plate method | PN-EN 12667 „N” | |
| 771 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Flatness Range up to 30 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 29468 | ||
| 772 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Squareness Range up to 10 mm/m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 824 | ||
| 773 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Water vapour permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN 12086 „N” | |
| 774 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Dimensional stability at 70 °C, Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 775 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | 70°C and 90%RH, -20°C; Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 776 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | 23°C and 90%RH Range up to 250 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 777 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Soaking at a set temperature Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 778 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Dimensional stability under constant normal conditions laboratory temperature: (23 ± 2)°C relative humidity (50 ± 5)% Range up to 1000 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1603 | ||
| 779 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Linear geometric dimensions Range up to 3000 mm Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 29465 | ||
| 780 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Range up to 3000 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 29466 „N” | ||
| 781 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Tensile strength perpendicular to the faces Range from 5 N to 50 000 N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1607 | ||
| 782 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1607 | ||
| 783 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Shear behaviour in a single-specimen arrangement Range from 5 N to 50 000 N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12090 | ||
| 784 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12090 | ||
| 785 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Behaviour in compression Range from 5 N to 50 000 N Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 29469 „N” | ||
| 786 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Compression test characteristics/method Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 29469 „N” | ||
| 787 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Behaviour in bending Range from 5 N to 50 000 N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12089, Method B | ||
| 788 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12089, Method B | ||
| 789 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Linear geometric dimensions Range up to 1000 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 12628 | ||
| 790 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Apparent density of pipe sections Range up to 3000 g Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 18098 | |
| 791 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Water absorption of pipe sections by short-term partial immersion Range up to 3000 g Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method with partial immersion | PN-EN ISO 12623 „N” | |
| 792 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Thermal conductivity Range (0,015 - 0,2) [W/mK] Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 8497 „N” | ||
| 793 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Water vapour transmission properties Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 12629 „N” | ||
| 794 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Apparent density, Range up to 3000 g Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 29470 | |
| 795 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Freeze–thaw resistance, Range down to -20°C, Range from 5 N to 50 000 N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 16546 | ||
| 796 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 16546 | ||
| 797 | Thermal insulation products for buildings and thermal insulation products for building equipment and industrial installations, including products made of: EPS, XPS, PUR/PIR, MW, FEF, CG, CS, PEF, PF E) | Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
|||
| Building Structures, Geotechnics and Concrete Laboratory (LZK) | |||||
| 798 | Ground | Type and condition of soil | Macroscopic method | PN-88/B-04481 | |
| 799 | Ground | Particle density, Pycnometer method | PN-88/B-04481 | ||
| 800 | Ground | Shrinkage limit | PN-88/B-04481 | ||
| 801 | Ground | Linear shrinkage | BS 1377-2:2022 | ||
| 802 | Ground | Mass loss on ignition | PN-88/B-04481 | ||
| 803 | Ground | Total specific surface area | Methylene blue sorption method | PN-88/B-04481 | |
| 804 | Ground | Maximum and minimum bulk density | PN-88/B-04481 | ||
| 805 | Ground | Optimum moisture content and maximum dry density of the soil skeleton | PN-88/B-04481 | ||
| 806 | Ground | Swelling pressure | Oedometer method | PN-88/B-04481 | |
| 807 | Ground | Angle of internal friction and cohesion | Direct shear method | PN-88/B-04481 | |
| 808 | Ground | Identification and description of soil, Macroscopic analysis | PN-EN ISO 14688-1:2018-05 | ||
| 809 | Ground | Humidity | PN-EN ISO 17892-1:2015-02 | PN-EN ISO 17892-1:2015-02/A1:2022-11 | ||
| 810 | Ground | Particle size distribution - sieve method range (0 - 63,0) mm |
PN-EN ISO 17892-4:2017-01 | ||
| 811 | Ground | Particle size distribution - hydrometer method | PN-EN ISO 17892-4:2017-01 | ||
| 812 | Ground | Bulk density - direct measurement | PN-EN ISO 17892-2:2015-02 | ||
| 813 | Ground | Specific density of the soil skeleton | Gas pycnometer method | PN-EN ISO 17892-3:2016-03 | |
| 814 | Ground | Determination of the liquid limit | PN-EN ISO 17892-12:2018-08+A2:2022-08 | ||
| 815 | Ground | Cone penetrometer method | |||
| 816 | Ground | Determination of the plastic limit | PN-EN ISO 17892-12:2018-08+A2:2022-08 | ||
| 817 | Ground | Incremental loading oedometer test stress range (0 – 25000) kPa |
PKN-CEN ISO/TS 17892-5:2009 | PN-EN ISO 17892-5:2017-06 | ||
| 818 | Ground | Direct shear apparatus test - shear box apparatus | PN-EN ISO 17892-10:2019-01 | ||
| 819 | Ground | Uniaxial compression | PN-EN ISO 17892-7:2018-05 | ||
| 820 | Ground | Unconsolidated undrained triaxial compression test. Pressure range in chamber (0 - 3500) kPa |
PN-EN ISO 17892-8:2018-05 | ||
| 821 | Ground | Consolidated triaxial compression test on fully water-saturated specimens Pressure range in the chamber (0 - 3500) kPa |
PN-EN ISO 17892-9:2018-05 | ||
| 822 | Ground | Coefficient of permeability | Constant hydraulic gradient method | PN-EN ISO 17892-11:2019-05 | |
| 823 | Ground | Testing in a direct shear apparatus - ring shear apparatus | PN-EN ISO 17892-10:2019-01 | ||
| 824 | Ground | Loss of mass on ignition | PN-EN 17685-1:2023-08 | ||
| 825 | Concrete, including fibre-reinforced concrete | Water absorption Range (1 - 20)% |
Gravimetric method | PN-88/B-06250 | |
| 826 | Concrete, including fibre-reinforced concrete | Resistance to freezing | PN-88/B-06250 | ||
| 827 | Concrete, including fibre-reinforced concrete | Water permeability of concrete Range (0,2 - 1,0) MPa |
PN-88/B-06250 | ||
| 828 | Concrete, including fibre-reinforced concrete | Shrinkage Range (0,0 - 10) mm/m |
Amsler method | PN-84/B-06714/23 | |
| 829 | Concrete, including fibre-reinforced concrete | Shrinkage Range (0,0 - 10) mm/m |
Graf-Kauffman method | PN-84/B-06714/24 | |
| 830 | Admixtures for concrete, mortar and grout | pH Range 0,0 - 14,0 |
Method: potentiometric | ISO 4316:1977 | PN-C-04963:1989 | |
| 831 | Floor screeds | Compressive strength Range (3 - 300) kN |
PN-EN 13892-2:2004 | ||
| 832 | Floor screeds | Flexural strength Range (1 - 100) kN |
PN-EN 13892-2:2004 | ||
| 833 | Aggregates | Alkali reactivity | PN-B 06714-34:1991+Az1:1997 | ||
| 834 | Aggregates | Alkali reactivity | Accelerated method | GDDKiA test procedure PB/1/18 | |
| 835 | Aggregates | Alkali reactivity | GDDKiA test procedure PB/2/18 | ||
| 836 | Admixtures for concrete, mortar and grout | Density of the liquid product Range (0,50 - 5,0) g/cm3 |
Pycnometric method | PN-C-04504:1992 cl. 4 | |
| 837 | Inorganic construction materials: gypsum, stone, aggregate, ashes, concrete, cement binders | Phase composition Method | PB LB-011/3/08-2010 | ||
| 838 | Inorganic construction materials: gypsum, stone, aggregate, ashes, concrete, cement binders | X-ray diffraction analysis | PB LB-011/4/12-2024 | ||
| 839 | Inorganic construction materials: gypsum, stone, aggregate, ashes, concrete, cement binders | Phase composition by thermal analysis (DTG, DTA and TG) | PB LB-010/3/08-2010 | ||
| 840 | Point fixing | Tensile and shear strength Range up to 100 kN |
Tensile and shear method | PB LL-CUAP 06.02/03/10/1/10-2008 | PB LL-CUAP 06.02/08/10/1/10-2008 | |
| 841 | Point fixing | Flexural strength parallel and perpendicular Range up to 100 kN |
Bending method | PB LL-CUAP 06.02/08/10/1/10-2008 | |
| 842 | Wastewater treatment plants | Strength of construction Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Calculation method | PN-EN 12566-3 + A2:2013 „N” | PB LZK-130/3/03-2018 „N” | |
| 843 | Precast concrete products, Masts and poles | Load-bearing capacity under combined bending and torsion Range up to 200 kN |
Bending with torsion method | PB LW-014/2/02-2009 | |
| 844 | Precast concrete products, Masts and poles | Torsional capacity Range up to 200 kN |
Torsion method | PN-EN 12843:2008 + | PB LW-013/2/02-2009 | |
| 845 | Precast concrete products, Masts and poles | Bending capacity Range up to 200 kN |
Bending method | PN-EN 12843:2008 + | PB LW-012/2/02-2009 | |
| 846 | Raw materials, building materials and construction products | Activity concentration of the radionuclide: 40K Range (60 - 25000) Bq/kg |
Gamma-ray spectrometry | PB–LZK 001/4/04-2021 | |
| 847 | Raw materials, building materials and construction products | Activity concentration of radionuclide: 214Bi Range (15 - 9000) Bq/kg |
Gamma-ray spectrometry | PB–LZK 001/4/04-2021 | |
| 848 | Raw materials, building materials and construction products | Activity concentration of radionuclide: 208Tl Range (7 - 12000) Bq/kg |
Gamma-ray spectrometry | PB–LZK 001/4/04-2021 | |
| 849 | Raw materials, building materials and construction products | Radionuclide activity concentration: 226Ra (calculated) | PB–LZK 001/4/04-2021 | ||
| 850 | Raw materials, building materials and construction products | Radionuclide activity concentration: 232Th (calculated) | PB–LZK 001/4/04-2021 | ||
| 851 | Raw materials, building materials and construction products | Activity concentration index I (calculated) | PB–LZK 001/4/04-2021 | ||
| 852 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, rendering compounds for thin-layer renders | Frost resistance | PN-B-04500 1985 | ||
| 853 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, rendering compounds for thin-layer renders | Water absorption Range (1 - 20)% |
Gravimetric method | PN-B-04500 1985 | |
| 854 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, rendering compounds for thin-layer renders | Shrinkage Range (0,00 - 20,00) mm/m |
PN-B-04500 1985 | ||
| 855 | Concrete, including fibre-reinforced concrete E | Density Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric-volumetric method | PN-EN 12390-7 | |
| 856 | Concrete, including fibre-reinforced concrete E | Depth of penetration of water under pressure Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-8 | ||
| 857 | Concrete, including fibre-reinforced concrete E | Freeze-thaw resistance in the presence of de-icing salt Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PKN-CEN/TS 12390-9 | ||
| 858 | Concrete, including fibre-reinforced concrete E | Freeze-thaw resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Reference method (slab test) | PN-B-06265 | |
| 859 | Concrete, including fibre-reinforced concrete E | Resistance to freezing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Ordinary method | PN-B-06265 | |
| 860 | Concrete, including fibre-reinforced concrete E | Abrasion resistance Range (3 - 30) cm3/50 cm2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Böhme disc | PN-EN 13892-3 | |
| 861 | Concrete, including fibre-reinforced concrete E | Compressive strength Range up to 3000 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-3 | ||
| 862 | Concrete, including fibre-reinforced concrete E | Flexural tensile strength Force range up to 100 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-5 | ||
| 863 | Concrete, including fibre-reinforced concrete E | Dispersed reinforcement content Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14721 | ||
| 864 | Concrete, including fibre-reinforced concrete E | Flexural tensile strength (limit of proportionality) Range (1 - 100) kN Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 14651 | PN-EN 14845-2 „N” | ||
| 865 | Cement binders E | Setting times Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Vicat apparatus | PN-EN 196-3 | |
| 866 | Cement binders E | Standard consistence Range (0 - 40) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Vicat apparatus | PN-EN 196-3 | |
| 867 | Cement binders E | Residue insoluble in hydrochloric acid and sodium carbonate. Range (0,04 - 40,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 868 | Cement binders E | Pozzolanicity Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-5 | ||
| 869 | Cement binders E | Soundness Range (0,0 - 20,0) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Le Chatelier ring | PN-EN 196-3 | |
| 870 | Cement binders E | Specific density Range (2,0 - 3,5) g/cm3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pycnometer method; Pycnometer method | PN-EN 196-6 using standard 1097-7 | PN-EN 196-6 using standard 1097-7 | |
| 871 | Cement binders E | Loss on ignition Range (0,04 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 872 | Cement binders E | Compressive strength Range (3 - 300) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-1 | ||
| 873 | Cement binders E | Flexural strength Range (1 - 15) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-1 | ||
| 874 | Cement binders E | Al2O3 content Range (0,10 - 90,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 875 | Cement binders E | Alkali content Range (0,01 - 5,00)% Na2Oeq Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flame photometry method | PN-EN 196-2 | |
| 876 | Cement binders E | Chloride content Range (0,005 - 10,000)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 877 | Cement binders E | Chromium VI content Range (0,00005 - 0,00100)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Spectrophotometric method | PN-EN 196-10 | |
| 878 | Cement binders E | Fe2O3 content Range (0,08 - 15,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 879 | Cement binders E | MgO content Range (0,10 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 880 | Cement binders E | Sulfate (SO3) content Range (0,07 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 881 | Cement binders E | Water retention Range (10 - 95)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 413-2 | ||
| 882 | Cement binders E | Air content Range (0 - 30)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 413-2 | ||
| 883 | Cement binders E | SiO2 content Range (0,10 - 70,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 884 | Cement binders E | Setting times – Method B Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 413-2 | ||
| 885 | Cement binders E | Degree of grinding Range 90 μm and 315 μm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: sieve | PN-EN 196-6 | |
| 886 | Admixtures for concrete, mortar and grout E | Capillary absorption Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 480-5 | ||
| 887 | Admixtures for concrete, mortar and grout E | Setting time Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 480-2 | ||
| 888 | Admixtures for concrete, mortar and grout E | Density of fresh concrete Range (800 - 5000) kg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric-volumetric method | PN-EN 12350-6 | |
| 889 | Admixtures for concrete, mortar and grout E | Consistency of the control concrete mix and the concrete mix with admixture Range (10,0 - 300,00) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Slump test method | PN-EN 12350-2 | |
| 890 | Admixtures for concrete, mortar and grout E | Consistency of the control concrete mix and the concrete mix with admixture Range (340 - 620) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flow table method | PN-EN 12350-5 | |
| 891 | Admixtures for concrete, mortar and grout E | Active substance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: infrared spectroscopy | PN-EN 480-6 | |
| 892 | Admixtures for concrete, mortar and grout E | Dry residue Range (0,00 - 100)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 480-8 | |
| 893 | Admixtures for concrete, mortar and grout E | Compressive strength Range from 3 kN to 300 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11 | ||
| 894 | Admixtures for concrete, mortar and grout E | Compressive strength Range from 3 kN to 3000 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-3 | ||
| 895 | Admixtures for concrete, mortar and grout E | Alkali content Range (0,01 - 30,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flame photometry method | PN-EN 480-12 | |
| 896 | Admixtures for concrete, mortar and grout E | Chloride content Range (0,001 - 30,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 480-10 | |
| 897 | Admixtures for concrete, mortar and grout E | Air content in fresh mortar Range (0 - 30)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: pressure | PN-EN 1015-7 | |
| 898 | Admixtures for concrete, mortar and grout E | Air content Range (0 - 30)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: pressure gauge | PN-EN 12350-7 | |
| 899 | Admixtures for concrete, mortar and grout E | Consistency of the control concrete mix and the concrete mix with admixture Range (10,0 - 300,00) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Slump test method | PN-EN 12350-2 | |
| 900 | Admixtures for concrete, mortar and grout E | Consistency of the control concrete mix and the concrete mix with admixture Range (340 - 620) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flow table method | PN-EN 12350-5 | |
| 901 | Admixtures for concrete, mortar and grout E | Reduction of mixing water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Slump test method | PN-EN 12350-2 | |
| 902 | Admixtures for concrete, mortar and grout E | Reduction of mixing water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flow table method | PN-EN 12350-5 | |
| 903 | Admixtures for concrete, mortar and grout E | Water reduction Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-4 | ||
| 904 | Concrete paving blocks E | Water absorption Range (0,0 - 20)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1338 Annex E | |
| 905 | Concrete paving blocks E | Abrasion resistance Range (5 - 40) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: wide abrasive wheel | PN-EN 1338 Annex G | |
| 906 | Concrete paving blocks E | Abrasion resistance Range (3000 - 35000) mm3/5000mm2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Böhme disc | PN-EN 1338 Annex H | |
| 907 | Concrete paving blocks E | Weather resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1338 Annex D | ||
| 908 | Concrete kerbs E | Water absorption Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1340 Annex E | |
| 909 | Concrete kerbs E | Abrasion resistance Range (5 - 40) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: wide abrasive wheel | PN-EN 1340 Annex G | |
| 910 | Concrete kerbs E | Abrasion resistance Range (3000 - 35000) mm3/5000 mm2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Böhme disc | PN-EN 1340 Annex H | |
| 911 | Concrete kerbs E | Weather resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1340 Annex D | ||
| 912 | Paving flags E | Water absorption Range (0,0 - 20)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1339 Annex E | |
| 913 | Paving flags E | Abrasion resistance Range (5 - 30) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: wide abrasive wheel | PN-EN 1339 Annex G | |
| 914 | Paving flags E | Abrasion resistance Range (3000 - 35000) mm3/5000mm2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Böhme disc | PN-EN 1339 Annex H | |
| 915 | Paving flags E | Weather resistance characteristics/method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1339 Annex D | ||
| 916 | Natural stone and natural stone products E | Density Range (1500 - 4000) kg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: pycnometer; Method: weight-volume | PN-EN 1936 | |
| 917 | Natural stone and natural stone products E | Porosity Range (0,0 - 50)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: calculation | PN-EN 1936 | |
| 918 | Natural stone and natural stone products E | Frost resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12371 | ||
| 919 | Water absorption, Range: (0,0 - 20)%, Gravimetric method | Frost resistance | PN-EN 13755 | ||
| 920 | Abrasion resistance, Range: (3000 - 35000) mm3/5000 mm2, Method: Böhme disc | Frost resistance | PN-EN 14157 | ||
| 921 | Abrasion resistance, Range: (5 - 40) mm, Method: wide abrasive wheel | Frost resistance | PN-EN 14157 | ||
| 922 | Capillary water absorption coefficient | Frost resistance | PN-EN 1925 | ||
| 923 | Compressive strength, Range: up to 3000 kN | Frost resistance | PN-EN 1926 | ||
| 924 | Flexural strength, Range: up to 3000 kN, Method: under concentrated force | Frost resistance Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 12372 „N” | ||
| 925 | Aggregates E, Bulk density, Range: (0 - 63) mm, Method: gravimetric | Frost resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1097-3 | ||
| 926 | Filler density, Range: (0,9 - 5,0) g/cm3, Pycnometer method | Frost resistance | PN-EN 1097-7 | ||
| 927 | Frost resistance | Frost resistance | PN-EN 1367-1 | ||
| 928 | Resistance to fragmentation, Range: (4 - 16) mm | Frost resistance | PN EN 1097-2 | ||
| 929 | Grading, Range: (0 - 63) mm | Frost resistance | PN-EN 933-1 | ||
| 930 | Chloride content, Range: (0,001 - 5,00)%, Titrimetric method | Frost resistance | PN-EN 1744-1 | ||
| 931 | Content of mineral dusts | Frost resistance | PN-EN 933-1 | ||
| 932 | Fresh concrete E | Bulk density Range (800 - 5000) kg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12350-6 | ||
| 933 | Fresh concrete E | Consistency Range (10,0 - 300,0) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Slump test method | PN-EN 12350-2 | |
| 934 | Fresh concrete E | Consistency Range (340 - 620) m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flow table method | PN-EN 12350-5 | |
| 935 | Fresh concrete E | Consistency Range (1 - 40) s Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Vebe method | PN-EN 12350-3 „N” | |
| 936 | Fresh concrete E | Air content Range (0 - 30)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: pressure gauge | PN-EN 12350-7 | |
| 937 | Fly ashes E | Specific density Range (1,0 - 3,0) g/cm3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pycnometric method | PN-EN 196-6 | |
| 938 | Fly ashes E | Specific density Range (1,0 - 3,0) g/cm3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pycnometric method | PN-EN 1097-7 | |
| 939 | Fly ashes E | Fineness by wet sieving Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 451-2 | ||
| 940 | Fly ashes E | Soundness Range (0,0 - 20,0) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Le Chatelier ring | PN-EN 196-3 | |
| 941 | Fly ashes E | Loss on ignition Range (0,04 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 942 | Fly ashes E | Pozzolanic activity index Range (3 - 300) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-1 | ||
| 943 | Fly ashes E | Chloride content. Range (0,005 - 5,000)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 944 | Fly ashes E | Free CaO content Range (0,01 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 451-1 | |
| 945 | Fly ashes E | Sulphate content as SO3 Range (0,07 - 10,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 946 | Fly ashes E | Al2O3 content Range (0,10 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 947 | Fly ashes E | Setting time Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-3 | ||
| 948 | Fly ashes E | CaO content Range (0,01 - 30,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 949 | Fly ashes E | MgO content Range (0,10 - 10,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 950 | Fly ashes E | Fe2O3 content Range (0,08 - 15,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 951 | Fly ashes E | SiO2 content Range (0,10 - 70,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 952 | Fly ashes E | Alkali content Range (0,1 - 10,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flame photometry method | PN-EN 196-2 | |
| 953 | Silica fume E | Loss on ignition Range (0,04 - 20,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 954 | Silica fume E | Pozzolanic activity index Range (3 - 300) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 196-1 | ||
| 955 | Silica fume E | Chloride content Range (0,005 - 5,000)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 196-2 | |
| 956 | Silica fume E | Sulfate (SO3) content Range (0,07 - 5,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 957 | Silica fume E | SiO2 content Range (0,10 - 100,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 196-2 | |
| 958 | Silica fume E | Dry matter content in suspension Range (0,01 - 90,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN EN 480-8 | |
| 959 | Silica fume E | Free CaO content Range (0,01 - 5,00)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Titrimetric method | PN-EN 451-1 | |
| 960 | Plastics, polymers E | Decomposition temperature Range (20 - 1000) oC Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 11358-1 | ||
| 961 | Products and systems for the protection and repair of concrete structures E | Sieve analysis Range (0 - 8) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12192-1 | ||
| 962 | Products and systems for the protection and repair of concrete structures E | Spread of thixotropic mortars Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13395-1 | ||
| 963 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Workable life – method B Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-9 | ||
| 964 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Correction time of fresh mortar Range up to 10 h Time measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-9 | ||
| 965 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Bulk density Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-10 | ||
| 966 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Range (300 - 3000) kg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-6 | ||
| 967 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Consistency using a penetrometer Range (0 - 70) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-4 | ||
| 968 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Consistency Range (100 - 280) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-3 | ||
| 969 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Adhesion to the substrate Range up to 3 MPa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-12 | ||
| 970 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Grain size distribution Range (0 - 8) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-1 | ||
| 971 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Water absorption coefficient due to capillary action Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-18 | ||
| 972 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Compressive strength Range up to 100 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11 | ||
| 973 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Flexural strength Range up to 100 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11 | ||
| 974 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Air content Range (0 - 30)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pressure method | PN-EN 1015-7 | |
| 975 | Mortars: cement, gypsum, lime, cement-lime, gypsum-lime, masonry mortars, plasters for thin-coat renders E | Bulk density of the dry mix in the loose and tapped state Range up to 24 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1097-3 | |
| 976 | Beam-and-block floor systems, expanded polystyrene blocks E | Resistance to point load Range up to 200 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Compression method | PN-EN 15037-4 | |
| 977 | Beam-and-block floor systems, expanded polystyrene blocks E | Linear geometric dimensions Range up to 5 m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-4 | ||
| 978 | Beam-and-block floor systems, expanded polystyrene blocks E | Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-4 | ||
| 979 | Concrete E including: - aerated concrete - lightweight concrete - heat-resistant concrete - normal concrete - hydrotechnical concrete - autoclaved concrete - aggregate concrete - other | Compressive strength Force range up to 10 MN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-3 | PN-EN 12504-1 | ||
| 980 | Concrete E including: - aerated concrete - lightweight concrete - heat-resistant concrete - normal concrete - hydrotechnical concrete - autoclaved concrete - aggregate concrete - other | Splitting tensile strength, Force range: up to 1 MN, Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-6 | ||
| 981 | Concrete E including: - aerated concrete - lightweight concrete - heat-resistant concrete - normal concrete - hydrotechnical concrete - autoclaved concrete - aggregate concrete - other | Modulus of elasticity in compression Force range 30 kN - 3000 kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-13 | ||
| 982 | Metal sheets E | Linear geometric dimensions Range up to 5 m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 508-1 | ||
| 983 | Metal sheets E | Strength under concentrated load Range up to 10 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14782 | ||
| 984 | Steel wire E | Resistance to bidirectional bending Wire diameter range (1,0 - 7,0) mm Reverse bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-ISO 7801 | ||
| 985 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Absorption, capillary rise method Range up to 30% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 772-11 | |
| 986 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Net and gross density Range up to 2500 kg/m3 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-13 | ||
| 987 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Volume, net volume and percentage of voids of calcium silicate masonry units by sand filling Range up to 70% Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Volumetric method | PN-EN 772-9 | |
| 988 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Determination of shrinkage Range up to 5 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 680 | ||
| 989 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 680 | ||
| 990 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Flatness of face surfaces of aggregate concrete, manufactured stone and natural stone masonry units Range up to 600 mm Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-20 | ||
| 991 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Percentage of void area in aggregate concrete masonry units Range up to 70% Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 772-2 | |
| 992 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Dimensions of masonry units Range up to 2 m Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-16 | ||
| 993 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Compressive strength Side dimension range up to 1200 mm and force up to 10 MN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-1 | ||
| 994 | Masonry units E including: - autoclaved aerated concrete units - calcium silicate units - clay units - concrete units - gypsum units and others | Moisture movement of aggregate concrete, manufactured stone and calcium silicate masonry units Range up to 500 mm Linear measurements Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-14 | ||
| 995 | Timber structures E | Tests under static load Range up to 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 380 | ||
| 996 | Steel structures E | Strength of single-span members Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1993-1-3 | ||
| 997 | Paving blocks E | Splitting tensile strength Range up to 10 MN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1338 | ||
| 998 | Concrete kerbs E | Flexural strength Range up to 10 MN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1340 | ||
| 999 | Linear drainage channels, covered channels, slot channels, kerb channels, E | Permanent deformations Range up to 10 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Linear measurement method | PN-EN 1433 „N” | |
| 1000 | Linear drainage channels, covered channels, slot channels, kerb channels, E | Watertightness, Macroscopic assessment Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1433 „N” | ||
| 1001 | Linear drainage channels, covered channels, slot channels, kerb channels, E | Strength under proof loads Range up to 5 MN Compression test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1433 „N” | ||
| 1002 | Masonry E including: - ancillary components for masonry | Pull-out load-bearing capacity from mortar of prefabricated bed joint reinforcement Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-2 „N” | ||
| 1003 | Masonry E including: - ancillary components for masonry | Compressive strength and modulus of elasticity of masonry, Range up to: length - 1,5 m, width – 0,45 m, height - 6 m, forces – 5 MN, Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1052-1 | ||
| 1004 | Masonry E including: - ancillary components for masonry | Flexural tensile strength Range 2 x 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1052-2 | ||
| 1005 | Masonry E including: - ancillary components for masonry | Flexural tensile strength Torsion method Range 2 x 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1052-5 | ||
| 1006 | Masonry E including: - ancillary components for masonry | Shear strength Range 2 x 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1052-3 | PN-EN 1052-4 | ||
| 1007 | Lintels E | Load-bearing capacity Range up to 4 x 200 kN Shear test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-9 „N” | PN-EN 845-2 „N” | ||
| 1008 | Lintels E | Bending load Pd corresponding to the specified deflection dd Range up to 4 x 200 kN Bend test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-9 „N” | PN-EN 845-2 „N” | ||
| 1009 | Lintels E | Durability Range up to 300 mm Linear measurements Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 845-2 „N” | ||
| 1010 | Lintels E | Material properties, Range up to 5 MN, Compression test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 845-2 „N” | ||
| 1011 | Lintels E | Linear geometric dimensions Range up to 5 m Linear measurements Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 845-2 „N” | PN-EN 846-11 | ||
| 1012 | Lintels E | Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it, Tabulated values Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-14 „N” | ||
| 1013 | Wastewater treatment plants E | Strength of construction Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Calculation method | PN-EN 12566-3 „N” | |
| 1014 | Wastewater treatment plants E | Strength Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Calculation method | PN-EN 12566-1 „N” | |
| 1015 | Sandwich panels E | Interaction between bending moment and support reaction Range up to 4 x 200 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 1016 | Sandwich panels E | Bending moment and stiffness of a freely supported slab Range up to 4 x 200 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 1017 | Raised access floors E | Static loads Range up to 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12825 | ||
| 1018 | Raised access floors E | Resistance to hard body load Mass range up to 4,5 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Macroscopic method | PN-EN 12825 | |
| 1019 | Raised access floors E | Resistance of the support to vertical loads Range up to 5 MN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12825 | ||
| 1020 | Paving flags E | Load-bearing capacity and bending strength Range 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1339 | ||
| 1021 | Precast concrete products, Masts and poles E | Testing of concrete. Compressive strength Load range up to 10 MN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Compression method | PN-EN 12843 | |
| 1022 | Precast concrete products, Masts and poles E | Concrete cover thickness Range up to 150 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Direct measurement method | PN-EN 12843 | |
| 1023 | Precast concrete products, Masts and poles E | Appearance of the finished surface Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual inspection method | PN-EN 12843 | |
| 1024 | Precast concrete products, Masts and poles E | Linear geometric dimensions Range up to 20 m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Direct measurement method | PN-EN 12843 | |
| 1025 | Concrete floor blocks E | Resistance to concentrated load Range up to 200 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-2 | ||
| 1026 | Concrete floor blocks E | Clamping test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-2 | ||
| 1027 | Concrete floor blocks E | Longitudinal compressive strength up to 10 MN Range up to 10 MN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-2 | ||
| 1028 | Lighting columns E | Load-bearing capacity and deformability Range up to 200 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Torsion / torsion with bending method or; Calculation method | PN-EN 40-3-1 | PN-EN 40-3-2 | PN-EN 40-3-3 | PN-EN 40-5 | PN-EN 40-6 | PN-EN 40-7 | PN-EN 40-4 | |
| 1029 | Strands, wires for prestressed structures E | Resistance to stress corrosion Load range up to 200 kN and diameters up to 18 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Solution A method; Solution B method | PN-EN ISO 15630-3 | |
| 1030 | Strands, wires for prestressed structures E | Relaxation Range up to 200 kN load and up to 18 mm in diameter Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 15630-3 | ||
| 1031 | Strands, wires for prestressed structures E | Tensile test with rebend Force range (50 - 1000) kN and diameters up to 18 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Stretching method | PN-EN-ISO 15630-3 | |
| 1032 | Reinforcing steel E | Shear resistance of the welded joint of reinforcing steel for concrete Range up to 1000 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Shear method | PN-EN ISO 15630-2 | |
| 1033 | Reinforcing steel E | Shear resistance of the welded joint of lattice girders Range up to 100 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Shear method | PN-EN 10080 | |
| 1034 | Reinforcing steel E | Measurement of geometric quantities and determination of the relative rib area of reinforcing steel for concrete Diameter range up to 40 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Direct measurement method | PN-EN ISO 15630-3 | PN-EN ISO 15630 1 | |
| 1035 | Reinforcing steel E | Bond of ribbed and indented reinforcing steel, pull-out test Diameter range: up to 20 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-out method | PN-EN 10080 | |
| 1036 | Reinforcing steel E | Bend and rebend test of reinforcing steel for concrete Diameter range up to 40 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Bending / reverse bending method | PN-EN ISO 7438 | PN-EN ISO 15630-1 | PN-EN ISO 15630-2 | |
| 1037 | Steel, metal alloys, steel components E | Static tensile test Strength and deformability Range up to 1000 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Stretching method | PN-EN ISO 15630-2 | PN-EN ISO 15630-3 | PN-EN ISO 15630-1 | PN-EN ISO 6892-1, Method B | |
| 1038 | Steel, metal alloys, steel components E | Technological bend test Punch diameter range (3 - 310) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Bending method | PN-EN ISO 7438 | |
| 1039 | Steel, metal alloys, steel components E | Hardness Brinell method Range HBS 1/5 - 10/250 HBW 2,5 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6506-1 | ||
| 1040 | Reinforced concrete floor beams E | Strength Range up to 200 kN Bending and shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15037-1 | ||
| 1041 | Suspended ceilings E | Load-bearing capacity of grid elements Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13964 „N” | ||
| 1042 | Suspended ceilings E | Bending resistance of grid profiles Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13964 „N” | ||
| 1043 | Suspended ceilings E | Linear geometric dimensions Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13964 „N” | ||
| 1044 | Fibres for concrete E | Tensile strength and tensile modulus of elasticity Range (0,1 - 10) kN Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Stretching method | PN-EN 14889-2 „N” | |
| 1045 | Wall brackets E | Load-bearing capacity and load-deflection characteristics Range up to 200 kN Bend test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-10 „N” | ||
| 1046 | Building mortars E | Absorption Range up to 40% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1015-18 | |
| 1047 | Building mortars E | Consistence of fresh mortar Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Flow table method | PN-EN 1015-3 | |
| 1048 | Building mortars E | Modulus of elasticity of mortars in compression Force range up to 100 kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13412 | ||
| 1049 | Building mortars E | Adhesion Range up to 10 MPa Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Peel method | PN-EN 1015-12 | |
| 1050 | Building mortars E | Compressive strength Range up to 200 kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11 | ||
| 1051 | Building mortars E | Flexural strength Range up to 200 kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11 | ||
| 1052 | Glued joints for timber structures, Timber structures – solid and glued laminated structural timber E) | Flexural strength Range (1 - 400) kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 408 | PN-EN 384 | ||
| 1053 | Glued joints for timber structures, Timber structures – solid and glued laminated structural timber E) | Modulus of elasticity parallel to the grain in bending Range (1 - 400) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 408 | PN-EN 384 | ||
| 1054 | Gully tops and manhole tops for vehicular and pedestrian areas E | Load-bearing capacity and permanent deformation Force range up to 5 MN, classes A15 - F90 Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 124-1 | ||
| 1055 | Gully tops and manhole tops for vehicular and pedestrian areas E | Slip resistance: condition of the concrete surface pattern height h, surface area of pattern An dimensions of grating slots Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 124-1 | ||
| 1056 | Gully tops and manhole tops for vehicular and pedestrian areas E | Bearing area Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 124-1 | ||
| 1057 | Gully tops and manhole tops for vehicular and pedestrian areas E | Securing of the cover/grating within the frame: mass of the cover/grating per unit area displacement h of the cover/grating corresponding to force Fv Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 124-1 | ||
| Building Structures, Geotechnics and Concrete Laboratory (LZK); Building Research Institute – Silesian Branch; Al. W. Korfantego 191; 40-153 Katowice | |||||
| 1058 | Structural nails and screws | Geometric dimensions Range up to 400 mm |
PB LOK-B00/3/03-2018 + PN-EN 14592:2022-09 | ||
| 1059 | Fasteners for fixing thermal insulation | Linear geometric dimensions Range up to 400 mm |
PB LOK-B00/3/03-2018 | ||
| 1060 | Fasteners for fixing thermal insulation | Plate stiffness Range (0,01 - 5) kN Stiffness test |
TR026:2016 | ||
| 1061 | Fasteners for fixing thin-walled and sandwich elements | Shear load-bearing capacity Range (0,5 - 50) kN Shear test |
PB LOK-B07/4/03-2018 | ||
| 1062 | Fasteners for fixing thin-walled and sandwich elements | Linear geometric dimensions Range up to 400 mm |
PB LOK-B00/3/03-2018 | ||
| 1063 | Metal fasteners: expansion, drive-in, screw-in | Linear geometric dimensions Range (0,1 - 1000) mm |
PB LOK-B00/3/03-2018 | ||
| 1064 | Metal fasteners: bonded | Linear geometric dimensions Range up to 400 mm |
PB LOK-B00/3/03-2018 | ||
| 1065 | Metal fasteners: bonded, embedded | Shear capacity on the arm Range up to 100 kN Shear test with lever arm |
PB LOK-B10/2/03-2018 | ||
| 1066 | Steel | Anti-corrosion coating thickness Range up to 45 μm |
PB LOK-B52/2/11-2018 | PN-EN ISO 3497:2004 | ||
| 1067 | Grids, hangers and connectors of suspended ceilings | Zinc coating thickness (durability test) Range up to 45 μm |
PB LOK-B52/2/11-2018 | PN-EN ISO 3497:2004 | ||
| 1068 | Pipe fixing system | Load-bearing capacity of clamps Range (0,5 - 100) kN Tensile test |
PB LOK-B11/1/03/2015 | ||
| 1069 | Three-dimensional steel connectors | Zinc coating thickness Range (1 - 45) μm |
PB LOK-B52/2/11-2018 | PN-EN ISO 3497:2004 | ||
| 1070 | Three-dimensional steel connectors | Load-bearing capacity of joints Range (0,1 - 400) kN Tensile test with shear |
PN-EN 26891:1997 + TR016:2002 | PN-EN 26891:1997 + EAD 130186-00-0603 | ||
| 1071 | Concrete E | Density Range (1 - 60) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 12390-7 | |
| 1072 | Concrete E | Splitting tensile strength Range (1 - 3000) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-6 | ||
| 1073 | Concrete E | Compressive strength Range (1 - 3000) kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-3 | PN-EN 12504-1 | ||
| 1074 | Concrete E | Flexural strength Range (1 - 100) kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12390-5 | ||
| 1075 | Concrete paving blocks E | Splitting tensile strength and failure load Range (1 - 3000) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1338, Annex F | ||
| 1076 | Concrete paving flags E | Flexural strength and failure load Range (1 - 100) kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1339, Annex F | ||
| 1077 | Clay and calcium silicate masonry units E | Water absorption Range (0,1 - 60) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 772-21 | |
| 1078 | Masonry units of clay, aggregate concrete and aerated concrete E | Gross dry density Range (1 - 60) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 772-13 | |
| 1079 | Masonry units of clay, aggregate concrete and aerated concrete E | Net dry density Range (1 - 60) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 772-13 + PN-EN 772-3 | |
| 1080 | Masonry units of clay, aggregate concrete and aerated concrete E | Compressive strength Range (5 - 3000) kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 772-1 | ||
| 1081 | Nails E | Linear geometric dimensions Range (0,1 - 400) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 10230-1, cl. 6.3 | ||
| 1082 | Nails E | Surface condition by naked eye, Visual assessment Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 10230-1, cl. 6.2 | ||
| 1083 | Structural nails and screws E | Characteristic yield moment - My,k Value calculated using fu fu (400 - 600) MPa Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1995-1-1 | PN-EN 14592 „N” | ||
| 1084 | Structural nails and screws E | Characteristic withdrawal parameter – fax,k force (200 - 10000) N Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1382 | PN-EN 14592 „N” | ||
| 1085 | Structural nails and screws E | Characteristic head pull-through parameter – fhead,k force (200 - 10000) N Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1383 | PN-EN 14592 „N” | ||
| 1086 | Structural nails and screws E | Characteristic tensile strength – ftens,k force (200 - 10000) N Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1383 | PN-EN 14592 „N” | ||
| 1087 | Structural nails and screws E | Characteristic torsional strength – ftor,k moment (1 - 30) Nm Torsion test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666 | PN-EN 14592 | ||
| 1088 | Natural stone E | Splitting capacity of pins in stone force: (1 - 10) kN dimension: (0,1 - 100) mm Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13364 | ||
| 1089 | Anchors, anchor rails, hangers, brackets E | Load-bearing capacity and load-deformation relationship Range (1 - 100) kN Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-4 „N” | ||
| 1090 | Anchors, anchor rails, hangers, brackets E | Tensile capacity and stiffness Range (1 - 100) kN Tensile test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-5 „N” | PN-EN 846-6 „N” | ||
| 1091 | Anchors, anchor rails, hangers, brackets E | Shear capacity and stiffness Range (1 - 100) kN Shear test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-7 „N” | ||
| 1092 | Anchors, anchor rails, hangers, brackets E | Load-bearing capacity and load-deformation relationship Range (1 - 100) kN Load test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-8 „N” | ||
| 1093 | Anchors, anchor rails, hangers, brackets E | Load-bearing capacity and load-deflection characteristics Range (1 - 100) kN Shear test with lever arm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-10 „N” | ||
| 1094 | Anchors, anchor rails, hangers, brackets E | Compressive capacity and stiffness Range (1 - 100) kN Compression test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-5 „N” | PN-EN 846-6 „N” | ||
| 1095 | Anchors, anchor rails, hangers, brackets E | Displacement under load Range (0,1 - 100) mm Tensile and shear test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 846-5 „N” | PN-EN 846-6 „N” | PN-EN 846-8 „N” | ||
| 1096 | Concrete kerbs E | Flexural strength Range (1 - 100) kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1340, Annex F | ||
| 1097 | Fasteners for fixing thin-walled and sandwich elements E | Diameter of the drilled hole Range (0,1 - 150) mm Linear measurement Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666, cl. 4.2.2 | ||
| 1098 | Fasteners for fixing thin-walled and sandwich elements E | Torsional capacity of the screw Range (1 - 30) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666, cl. 4.2.3 | PN-EN ISO 2702 | ||
| 1099 | Fasteners for fixing thin-walled and sandwich elements E | Ability to drive screws into steel sheets Range (1 - 99) s Screwing-in test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 10666, cl. 4.2.1 | ||
| 1100 | Metal fasteners: expansion, drive-in, screw-in E | Load-bearing capacity of threaded fasteners Range (1 - 1000) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 898-1 | PN-EN ISO 3506-1 | ||
| 1101 | Bonded metal anchors E | Load-bearing capacity of threaded fasteners Range (1 - 1000) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 898-1 | PN-EN ISO 3506-1 | ||
| 1102 | Fasteners for fixing thermal insulation E | Maximum torque Range (1 - 100) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330196-xx-060 | ||
| 1103 | Fasteners for fixing thermal insulation E | Pull-out capacity in substrates: normal-weight concrete, solid lightweight concrete, perforated lightweight concrete, solid ceramic substrate, perforated ceramic substrate, autoclaved lightweight concrete Range (0,01 - 10) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330196-xx-0604 | ||
| 1104 | Fasteners for fixing thermal insulation E | Resistance to wind load by static action through a foam block Range (1 - 50) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-xx-0404 EAD 040287-xx-0404 | ||
| 1105 | Fasteners for fixing thermal insulation E | Resistance to wind load by pull-through of fasteners through the thermal insulation product Range (1 - 10) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-xx-0404 EAD 040287-xx-0404 | ||
| 1106 | Fasteners for fixing thin-walled and sandwich elements E | Shear load-bearing capacity Range (0,5 - 50) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330046-xx-0602 EAD 330047-xx-0602 | ||
| 1107 | Fasteners for fixing thin-walled and sandwich elements E | Pull-out capacity Range (0,5 - 50) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330046-xx-0602 EAD 330047-xx-0602 | ||
| 1108 | Metal fasteners: expansion, drive-in, screw-in E | Shear load-bearing capacity Range (1 - 200) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330232-xx-0601 EAD 330747-xx-0601 + TR048 | ||
| 1109 | Metal fasteners: expansion, drive-in, screw-in E | Pull-out capacity Range (1 - 900) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330232-xx-0601 EAD 330747-xx-0601 + TR048 | ||
| 1110 | Metal fasteners: expansion, drive-in, screw-in E | Resistance to maximum torque Range (5 - 1000) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330232-xx-0601 EAD 330747-xx-0601 + TR048 | ||
| 1111 | Metal fasteners: expansion, drive-in, screw-in E | Resistance to failure torque Range (5 - 1000) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330232-xx-0601 EAD 330747-xx-0601 + TR048 | ||
| 1112 | Bonded metal anchors E | Shear load-bearing capacity Range (1 - 200) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330499-xx-0601 | ||
| 1113 | Bonded metal anchors E | Pull-out capacity Range (1 - 900) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330499-xx-0601 | ||
| 1114 | Bonded metal anchors E | Pull-out capacity in solid and perforated ceramic substrates, solid and perforated lightweight concrete, autoclaved aerated concrete Range (1 - 900) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330076-xx-0604 | ||
| 1115 | Bonded metal anchors E | Shear capacity in solid and perforated ceramic substrates, solid and perforated lightweight concrete, autoclaved aerated concrete Range (1 - 200) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330076-xx-0604 | ||
| 1116 | Bonded metal anchors E | Resistance to maximum torque Range (1 - 1000) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330076-xx-0604 | ||
| 1117 | Bonded metal anchors E | Load-bearing capacity of the adhesive joint under various conditioning conditions Range (1 - 100) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330499-xx-0601 | ||
| 1118 | Bonded metal anchors E | Resistance to maximum torque Range (1 - 1000) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330499-xx-0601 | ||
| 1119 | Bonded metal anchors E | Resistance to failure torque Range (1 - 1000) Nm Torque load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330499-xx-0601 | ||
| 1120 | Plastic-metal fasteners E | Pull-out capacity in solid and perforated concrete substrates and solid and perforated masonry substrates. Range (1 - 50) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330284-xx-0604+TR64 | ||
| 1121 | Reinforcing bars: bonded-in in new structures E | Shear capacity of the adhesive joint: normal-weight concrete, lightweight concrete Range (1 - 900) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330087-xx-0601 | ||
| 1122 | Reinforcing bars: bonded-in in new structures E | Fixing capacity at maximum depth Range (0,5 - 2,5) m Visual assessment Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330087-xx-0601 | ||
| 1123 | Reinforcing bars: bonded-in in new structures E | Load-bearing capacity of the adhesive joint under various conditioning conditions Range (1 - 900) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 330087-xx-0601 | ||
| 1124 | Metric nuts E | Load-bearing capacity of nuts Range (1 - 100) kN Visual assessment after the load test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 898-2 | ||
| 1125 | Suspended ceiling panels E | Linear geometric dimensions Range (0,1 - 3) m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13964, cl. 4.2 | ||
| 1126 | Suspended ceiling panels E | Flexural strength Range (0,5 - 10) kN Bend test Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13964, Annex F „N” | ||
| 1127 | Platforms, wide steps, narrow steps E | Deformation under static load Range (0,1 - 100) mm Displacement under load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 516 „N” | ||
| 1128 | Reinforcing bars: post-installed bonded bars for structural repairs E | Pull-out capacity: normal-weight concrete, lightweight concrete Range (1 - 900) kN Pull-out test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1881 | ||
| 1129 | Reinforcing bars: post-installed bonded bars for structural repairs E | Strength properties: Range up to 1000 kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6892-1 Method B | ||
| 1130 | Reinforcing bars: bonded-in in new structures E | Strength properties: Range up to 1000 kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6892-1, Method B | ||
| 1131 | Steel E | Vickers hardness Range (5 - 30) HV Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Vickers method | PN-EN ISO 6507-1 | |
| 1132 | Steel E | Strength properties: force (1 - 1000) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6892-1, Method B | ||
| 1133 | Reinforcing steel, welded fabric E | Length and width of the mesh, spacing and overhangs of the bars and bar diameters, Range up to 3000 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 15630-2 | ||
| 1134 | Reinforcing steel, welded fabric E | Shear capacity of the welded joint Range (0,5 - 100) kN Shear test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 15630-2 | ||
| 1135 | Reinforcing steel, welded fabric E | Fatigue resistance under axial loading Range (5 - 16) mm Fatigue test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 15630-1 | PN-EN ISO 15630-2 | ||
| 1136 | Reinforcing steel, welded fabric E | Strength properties: Range up to 1000 kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6892-1, Method B | ||
| 1137 | Reinforcing steel, welded fabric E | Bending capacity diameter (1 - 16) mm Visual assessment Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 15630-2 | ||
| 1138 | Three-dimensional steel connectors E | Strength of nails Range (0,1 - 50) kN Tensile test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1382 | ||
| 1139 | Mortars E | Compressive strength Range (5 - 3000) kN Compression test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11, cl. 9 | ||
| 1140 | Mortars E | Flexural strength Range (0,1 - 100) kN Bend test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-11, cl. 8 | ||
| Building Materials Laboratory (LZM) | |||||
| 1141 | Plastic products | Tear strength Range from 0,001 kN to 10 kN angle specimen |
PN-ISO 34-1:2007 | ||
| 1142 | Plastic products | Resistance to a humid atmosphere containing SO2 | PN-EN ISO 3231:2000 | ||
| 1143 | Coatings | In-film efficacy of film preservatives against mould fungi | PN EN 15457: 2014 +PB LM-004/02/03-2015 | ||
| 1144 | Coatings | In-film efficacy of film preservatives against algae | PN EN 15458:2014 +PB LM-005/02/01-2015 | ||
| 1145 | Wood preservatives | Protective properties of wood preservatives against mould fungi for use on wood and wood-based materials | PB LD-006/2/01-1999 | ||
| 1146 | Adhesives, products with adhesive joints | Open time Range from 0,6 kN to 16 kN |
Pull-off method | PN-EN 1346:2008 | |
| 1147 | Adhesives, products with adhesive joints | Transverse deformation | PN-EN 12002:2010 | ||
| 1148 | Adhesives, products with adhesive joints | Adhesion after freeze-thaw cycles Range from 0,6 kN to 16 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Pull-off method | PN-EN 1348:2008 „N” | |
| 1149 | Adhesives, products with adhesive joints | Adhesion after thermal ageing Range from 0,6 kN to 16 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Pull-off method | PN-EN 1348:2008 „N” | |
| 1150 | Adhesives, products with adhesive joints | Adhesion after water immersion Range from 0,6 kN to 16 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Pull-off method | PN-EN 1348:2008 „N” | |
| 1151 | Adhesives, products with adhesive joints | Initial adhesion (initial strength) Range from 0,6 kN to 16 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
Pull-off method | PN-EN 1348:2008 „N” | |
| 1152 | Adhesives, products with adhesive joints | Sagging (slip) | PN-EN 1308:2008 | ||
| 1153 | Adhesives, products with adhesive joints | Shear strength after thermal ageing Range from 0,001 kN to 10 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 1324:2008 „N” | ||
| 1154 | Adhesives, products with adhesive joints | Shear strength after water immersion Range from 0,001 kN to 10 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 1324:2008 „N” | ||
| 1155 | Adhesives, products with adhesive joints | Initial shear strength Range from 0,001 kN to 10 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 1324:2008 „N” | ||
| 1156 | Adhesives, products with adhesive joints | Shear strength at elevated temperature Range from 0,001 kN to 10 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 1324:2008 „N” | ||
| 1157 | Adhesives, products with adhesive joints | Shear strength Range from 0,001 kN to 10 kN Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 12003:2008 „N” | ||
| 1158 | Roll waterproofing products | Tear strength Range from 0,001 kN to 10 kN |
PN-ISO 34-1:2007 | ||
| 1159 | Plastic products | Tensile mechanical properties – modulus of elasticity Range up to 50 kN, crosshead up to 1500mm specimen type 5B,1B,1BA |
PN-EN ISO 527-1:1998 | PN-EN ISO 527-2:1998 | PN-EN ISO 527-3:1998 | ||
| 1160 | Reactive fire protection products | Thickness Range (1 - 150) mm |
EOTA TR 24:2006 amended 2009 | ||
| 1161 | Reactive fire protection products | Compatibility with metals and plastics | EOTA TR 24:2006 amended 2009 | ||
| 1162 | Reactive fire protection products | Mass per unit area Range (0,001 - 10) kg |
Gravimetric method | EOTA TR 024:2006 amended 2009 | |
| 1163 | Reactive fire protection products | Resistance to cyclically changing environmental conditions temperature up to 80oC rel. humidity up to 90% product type Z1, Z2, Y2 and Y1 |
EOTA TR 024:2006 amended 2009 | ||
| 1164 | Coating products for the protection of metal components | Resistance to a humid atmosphere containing SO2 | PN-EN ISO 3231:2000 | PN-EN ISO 6988:2000 | ||
| 1165 | Waterproofing products in liquid or coating form | Skin formation time | PN-B-24002:1997 | PN-B-24000:1997 | ||
| 1166 | Waterproofing products in liquid or coating form | Working consistency – visual assessment | PN-B-24000:1997 | ||
| 1167 | Waterproofing products in liquid or coating form | External appearance of the compound - visual assessment | PN-B-24000:1997 | PN-B-24002:1997 | ||
| 1168 | Waterproofing products in liquid or coating form | Non-emulsified bitumen content | Gravimetric method | PN-B-24002:1997 | |
| 1169 | Waterproofing products in liquid or coating form | Ability to dilute with water | PN-B-24000:1997 | PN-B-24002:1997 | ||
| 1170 | Waterproofing products in liquid or coating form | Flexibility Range up to -30° C |
Block bending method | PN-B-24000:1997 | |
| 1171 | Waterproofing products in liquid or coating form | Slip | PN-B-24000:1997 | ||
| 1172 | Waterproofing products in liquid or coating form | Water penetration of the coating Range up to 2m |
Water column method | PN-B-24000:1997 | PN-B-24002:1997 | |
| 1173 | Waterproofing products in liquid or coating form | Slip | PN-B-24002:1997 | ||
| 1174 | Waterproofing products in liquid or coating form | External appearance of the coating -visual assessment | PN-B-24000:1997 | ||
| 1175 | Coating products for the protection of metal elements E | Thickness Range (4 - 30) μm also in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Eddy current method | PN-EN ISO 2360 „N” | PN-EN ISO 2808 „N” | |
| 1176 | Coating products for the protection of metal elements E | Resistance to acetic acid salt spray AASS test Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 1177 | Coating products for the protection of metal elements E | Sealing of the coating Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Electrochemical method | PN-EN ISO 2931 | |
| 1178 | Coating products for the protection of metal elements E | Sealing of the coating - mass loss Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method, method 2 | PN-EN ISO 3210 | |
| 1179 | Coating products for the protection of metal elements E | Assessment of pitting corrosion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 8993 | PN-EN ISO 8994 | ||
| 1180 | Plastic products E | Resistance to a humid atmosphere containing SO2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 22479 | ||
| 1181 | Admixtures for mortar and concrete, mortars E | Corrosion susceptibility of reinforcing steel in concrete Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Electrochemical method | PN-EN 480-14 | |
| 1182 | Waterproofing sheet products E | Resistance to liquid chemicals, including water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 175 | |
| 1183 | Waterproofing sheet products E | Water vapour permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN 1931 „N” | PN-EN ISO 12572 | |
| 1184 | Concrete impregnation E | Depth of impregnation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Indicator method | PN-EN 1504-2 | |
| 1185 | Sealing products and putties E | Resistance to liquid chemicals, including water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 175 | |
| 1186 | Metal products E | Resistance to salt spray (NSS, AASS test) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 1187 | Waterproofing sheet products E | Water vapour permeability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN 1931 „N” | |
| 1188 | Coating products for the protection of metal elements E | Flexibility - bend test (cylindrical mandrel) Mandrel diameter Range (2 - 32) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 1519 | ||
| 1189 | Coating products for the protection of metal elements E | Flexibility – T-bend, cylindrical mandrel and conical mandrel, Diameter of the cylindrical mandrel Range (2 - 32) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13523-7 | ||
| 1190 | Coating products for the protection of metal elements E | Thickness Range (4 - 2000) μm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Eddy current method; Magnetic induction method, also in situ | PN-EN ISO 2808 „N“ | PN-EN ISO 2178 „N“ | PN-EN ISO 2360 „N“ | |
| 1191 | Coating products for the protection of metal elements E | Filiform corrosion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 4623-1 | PN-EN ISO 4623-2 | PN-EN ISO 4628-10 | ||
| 1192 | Coating products for the protection of metal elements E | Mass of the metallic coating Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 1460 | PN-EN ISO 1461 „N“ | PN-EN 10244-2 | |
| 1193 | Coating products for the protection of metal elements E | Resistance to liquids Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 2812-1 | ||
| 1194 | Coating products for the protection of metal elements E | Resistance to salt spray (NSS test), Resistance to acetic acid salt spray (AASS test) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 9227 | ||
| 1195 | Coating products for the protection of metal elements E | Resistance to moisture (continuous condensation) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6270-1 | ||
| 1196 | Coating products for the protection of metal elements E | Resistance to moisture and condensation water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6270-2 | ||
| 1197 | Coating products for the protection of metal elements E | Resistance to a humid atmosphere containing SO2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 22479 | ||
| 1198 | Coating products for the protection of metal elements E | Resistance to deformation Weight of 1 or 2 kg, height up to 1 m Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Falling weight method. | PN-EN ISO 6272-1 | |
| 1199 | Coating products for the protection of metal elements E | Delamination and corrosion around a scribe Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method | PN-EN ISO 4628-8 | |
| 1200 | Coating products for the protection of metal elements E | Adhesion to metals and intercoat adhesion Range (0,2 - 25) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN ISO 4624 | |
| 1201 | Coating products for the protection of metal elements E | Chalking, velvet method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, also in situ | PN-EN ISO 4628-7 | |
| 1202 | Coating products for the protection of metal elements E | Cupping Range (0 -30) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Slow strain rate method | PN-EN ISO 1520 | |
| 1203 | Coating products for the protection of metal elements E | Hardness Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Buchholz method | PN-EN ISO 2815 | |
| 1204 | Coating products for the protection of metal elements E | Surface appearance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, including in situ | PN-EN ISO 1461 „N“ | |
| 1205 | Coating products for the protection of metal elements E | Rusting Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, also in situ | PN-EN ISO 4628-3 | |
| 1206 | Coating products for the protection of metal elements E | Flaking Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, also in situ | PN-EN ISO 4628-5 | |
| 1207 | Coating products for the protection of metal elements E | Defects – quantity and size Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, also in situ | PN-EN ISO 4628-1 | |
| 1208 | Coating products for the protection of metal elements E | Adhesion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Cross-cut method – manual method | PN-EN ISO 2409 | |
| 1209 | Coating products for the protection of metal elements E | Flexibility - bending over a mandrel, Mandrel diameter Range (2 - 32) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 1519 | ||
| 1210 | Coating products for the protection of metal elements E | Mass Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 10346, Annex A | |
| 1211 | Coatings on concrete E | Thermal compatibility - cyclic freezing and thawing in de-icing salt Range (0,2 - 25) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13687-1 | ||
| 1212 | Coatings on concrete E | Resistance to climatic conditions Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1062-11 | ||
| 1213 | Coatings on concrete E | Chemical resistance - change in appearance and adhesion Range (0,2 - 25) kN or hardness Range: scale A and D Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pressureless method | PN-EN 13529 | |
| 1214 | Coatings on concrete E | Abrasion resistance (Taber test) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 5470-1 | |
| 1215 | Coatings on concrete E | Crack bridging Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Tensile test on concrete, method A | PN-EN 1062-7 | |
| 1216 | Coatings on concrete E | Carbon dioxide permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1062-6 | |
| 1217 | Coatings on concrete E | Water vapour permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 7783 | |
| 1218 | Coatings on concrete E | Water permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1062-3 | |
| 1219 | Coatings on concrete E | Adhesion to concrete Range (0,2 - 25) kN Discs 5 cm in diameter, also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 1542 | |
| 1220 | Coatings on concrete E | Adhesion to concrete Range (0,2 - 25) kN discs 2 cm in diameter, also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN ISO 4624 | |
| 1221 | Coatings on concrete E | Resistance to liquids Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method | PN-EN ISO 2812-1 | |
| 1222 | Coatings E | Protection of reinforcement against corrosion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15183 | ||
| 1223 | Plasters and mortars E | Capillary absorption Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 13057 | |
| 1224 | Plasters and mortars E | Thermal compatibility - cyclic freezing and thawing in de-icing salt Range (0,2 - 25) kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13687-1 | ||
| 1225 | Plasters and mortars E | Water vapour permeability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-19 | ||
| 1226 | Plasters and mortars E | Adhesion, pull-off method Range (0,2 - 25) kN (discs with a diameter of 50mm) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1542 | ||
| 1227 | Plasters and mortars E | Compressive strength Range (30 - 250) kN, specimen (40x40x160) mm and (40x40x40) mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12190 | ||
| 1228 | Waterproofing sheet products E | Tensile mechanical properties Range up to 10 kN, Crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12311-1 | PN-EN 12311-2 | ||
| 1229 | Waterproofing sheet products E | Water seepage Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13111 „N” | ||
| 1230 | Waterproofing sheet products E | Tensile mechanical properties, Testing machine up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12311-1 | ||
| 1231 | Waterproofing sheet products E | Water seepage Range up to 1,6 MPa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Pressure method | PN-EN 13859-1 „N” | PN-EN 13859-2 „N” | |
| 1232 | Waterproofing sheet products E | Peel strength of joints, Testing machine up to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12316-1 | ||
| 1233 | Waterproofing sheet products E | Shear strength of joints, Testing machine up to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12317-1 | ||
| 1234 | Waterproofing sheet products E | Watertightness. Pressure method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1928 „N" | ||
| 1235 | Plastic products E | Action of liquid chemicals and water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1847 | ||
| 1236 | Plastic products E | Water seepage Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13111 „N” | ||
| 1237 | Plastic products E | Watertightness Pressure method Range up to 1,2 MPa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1928 „N” | ||
| 1238 | Plastic products E | Water seepage Range up to 1,2 MPa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Pressure method | PN-EN 13859-2 „N” | PN-EN 13859-1 „N” | |
| 1239 | Products of plastics and rubber (films, profiled films, fabrics, textiles, nonwovens, geomembranes, membranes, mats, tapes, sheets, laminates, gaskets and others) E | Tensile mechanical properties up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12311-2 | ||
| 1240 | Products of plastics and rubber (films, profiled films, fabrics, textiles, nonwovens, geomembranes, membranes, mats, tapes, sheets, laminates, gaskets and others) E | Tensile mechanical properties – except modulus of elasticity Range up to 10 kN and elongation up to 1500mm / up to 50 kN and elongation (6 - 60) mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 527-1 „N” | PN-EN ISO 527-2 | PN-EN ISO 527-3 | ||
| 1241 | Products of plastics and rubber (films, profiled films, fabrics, textiles, nonwovens, geomembranes, membranes, mats, tapes, sheets, laminates, gaskets and others) E | Tear strength Range up to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12310-2 | ||
| 1242 | Products of plastics and rubber (films, profiled films, fabrics, textiles, nonwovens, geomembranes, membranes, mats, tapes, sheets, laminates, gaskets and others) E | Peel strength of the joints Range up to 10kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12316-2 | ||
| 1243 | Products of plastics and rubber (films, profiled films, fabrics, textiles, nonwovens, geomembranes, membranes, mats, tapes, sheets, laminates, gaskets and others) E | Shear strength of joints Range up to 10kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12317-2 | ||
| 1244 | Sealing products and putties E | Resistance to sagging Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 7390 „N” | ||
| 1245 | Sealing products and putties E | Elastic recovery up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 7389 | ||
| 1246 | Sealing products and putties E | Adhesion / cohesion properties at constant temperature up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 9046 „N” | ||
| 1247 | Sealing products and putties E | Adhesion / cohesion properties at variable temperatures up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 9047 „N” | ||
| 1248 | Sealing products and putties E | Adhesion/cohesion properties of glazing putties after exposure to heat, water and artificial light through glass up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 11431 „N” | ||
| 1249 | Sealing products and putties E | Adhesion/cohesion properties after exposure to water up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO10590 „N” | PN-EN ISO 10591 „N” | ||
| 1250 | Sealing products and putties E | Tensile mechanical properties up to 10 kN, Crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 8339 „N” | ||
| 1251 | Sealing products and putties E | Mechanical properties under constant tension up to 10 kN, crosshead up to 1500 mm Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 8340 „N” | ||
| 1252 | Sealing products and putties E | Change in mass and volume Range up to 2100 g Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 10563 „N” | ||
| 1253 | Waterproofing products in liquid or coating form E | Watertightness Range up to 1,2 MPa Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Pressure method | PN-EN 14891 „N” | PN-EN 15820 „N” | |
| 1254 | Floors, floorings and pavements E | Slip resistance, pendulum test also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 13036-4 | ||
| 1255 | Floors, floorings and pavements E | Slip resistance also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
CEN/TS 15676 | ||
| 1256 | Floors, floorings and pavements E | Slip resistance, pendulum test also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14231 | ||
| 1257 | Adhesives, products with adhesive joints E | Initial shear strength Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12004-2 | ||
| 1258 | Adhesives, products with adhesive joints E | Shear strength at elevated temperature Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12004-2 | ||
| 1259 | Adhesives, products with adhesive joints E | Shear strength Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12004-2 | ||
| 1260 | Thermal insulation systems and their components E | Dry matter content Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 827 | ||
| 1261 | Adhesives, products with adhesive joints E | Open time Range from 0,6 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1262 | Adhesives, products with adhesive joints E | Transverse deformation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12004-2 | ||
| 1263 | Thermal insulation systems and their components E | Open time Range from 0,001 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1264 | Thermal insulation systems and their components E | Adhesion to substrates Range from 0,001 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040083-XX-0404 | |
| 1265 | Adhesives, products with adhesive joints E | Adhesion after freeze-thaw cycles Range from 0,6 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1266 | Adhesives, products with adhesive joints E | Adhesion after thermal ageing Range from 0,6 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1267 | Adhesives, products with adhesive joints E | Adhesion after water immersion Range from 0,6 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1268 | Adhesives, products with adhesive joints E | Initial adhesion (initial strength) Range from 0,6 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1269 | Thermal insulation systems and their components E | Adhesion of the reinforced layer Range from 0,001 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040083-XX-0404 | |
| 1270 | Adhesives, products with adhesive joints E | Sagging (slip) Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12004-2 | ||
| 1271 | Adhesives, products with adhesive joints E | Shear strength after thermal ageing Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1272 | Adhesives, products with adhesive joints E | Shear strength after water immersion Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | PN-EN 12004-2 | |
| 1273 | Thermal insulation systems and their components E | Mass per unit area Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | EAD 040016-XX-0404 | |
| 1274 | Thermal insulation systems and their components E | Breaking force and relative elongation (breaking stress and elongation) Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040016-XX-0404 | |
| 1275 | Thermal insulation systems and their components E | Loss on ignition / ash content Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040016-XX-0404 | ||
| 1276 | Thermal insulation systems and their components E | Mesh size Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040016-XX-0404 | ||
| 1277 | Thermal insulation systems and their components E | Capillary absorption (water absorption, capillary rise of water) Range up to 12 kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | EAD 040083-XX-0404 | |
| 1278 | Thermal insulation systems and their components E | Frost resistance (freeze-thaw cycles), simulation method Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040083-XX-0404 | |
| 1279 | Thermal insulation systems and their components E | Resistance to ageing Range from 0,001 kN to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040083-XX-0404 | |
| 1280 | Thermal insulation systems and their components E | Resistance to hard body impact Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-XX-0404 | ||
| 1281 | Thermal insulation systems and their components E | Water vapour permeability (diffusion resistance) Range up to 610 g Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-XX-0404 | PN-EN 12086 | ||
| 1282 | Thermal insulation systems and their components E | Intercoat adhesion Range from 0,001 kN to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Pull-off method | EAD 040083-XX-0404 | |
| 1283 | Plastic products E | Colour fastness to light Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 105-B02 | ||
| 1284 | Sandwich panels E | Shear modulus in bending Range up to 30 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 1285 | Sandwich panels E | Modulus of elasticity in tension Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 1286 | Sandwich panels E | Modulus of elasticity in compression Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN ISO 29469 | PN-EN 14509 | |
| 1287 | Sandwich panels E | Modulus of elasticity in tension of the core material Range up to 30 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 14509 | |
| 1288 | Sandwich panels E | Dimensional stability under specified temperature and humidity conditions temperature range up to 180°C, rel. hum. range (0 - 100)% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 1289 | Sandwich panels E | Tensile strength Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1607 | PN-EN 14509 | ||
| 1290 | Sandwich panels E | Shear strength in a single-specimen arrangement Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12090 | ||
| 1291 | Sandwich panels E | Shear strength Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14509 | ||
| 1292 | Sandwich panels E | Compressive strength or compressive stress at 10% deformation Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 29469 | PN-EN 14509 | ||
| 1293 | Floors, floorings and pavements E | Chemical resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN ISO 175 | |
| 1294 | Floors, floorings and pavements E | Anti-slip properties Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
DIN 51130 | ||
| 1295 | Plasters and mortars E | Relative diffusion resistance Range up to 610 g Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 7783 | ||
| 1296 | Plasters and mortars E | Adhesion of hardened rendering and plastering mortars to the substrate Range up to 16 kN also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-12 | ||
| 1297 | Plasters and mortars E | Coefficient of water absorption due to capillary action of hardened mortar Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1015-18 | |
| 1298 | Plasters and mortars E | Bulk density Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | PN-EN 1015-10 | |
| 1299 | Plasters and mortars E | Consistency of fresh mortar by the flow table method Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-3 | ||
| 1300 | Plasters and mortars E | Adhesion of hardened rendering and plastering mortars to the substrate Range up to 16 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-12 | ||
| 1301 | Plasters and mortars E | Coefficient of water absorption due to capillary action of hardened mortar Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1015-18 | ||
| 1302 | Plasters and mortars E | Flexural and compressive strength Except air lime mortars and air lime-cement mortars with a cement mass not exceeding 50% of the total binder mass. Range up to 10 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 350140-XX-1106 | PN-EN 1015-11 | ||
| 1303 | Adhesives, products with adhesive joints E | Tensile strength of the adhesive joint Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-XX-0404 | ||
| 1304 | Adhesives, products with adhesive joints E | Tensile strength of the adhesive joint with modified bonding conditions, i.e. thickness, open time, application temperature Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-XX-0404 | ||
| 1305 | Adhesives, products with adhesive joints E | Shear strength and shear modulus Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 040083-XX-0404 | ||
| 1306 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Apparent density Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12467 | ||
| 1307 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Flexural strength Range up to 30 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Strength test method | PN-EN 12467 | |
| 1308 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Freeze-thaw Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12467 | ||
| 1309 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Resistance to hot water Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12467 | ||
| 1310 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Resistance to heating-water spraying Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12467 | ||
| 1311 | Flat fibre-cement, magnesium and other mineral-bonded boards E | Resistance to immersion-drying Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12467 | ||
| 1312 | Plastic products E | Ageing factor of the tank material Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-3 „N” | ||
| 1313 | Plastic products E | Creep coefficient of the tank material Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 12566-3 „N” | ||
| 1314 | Gypsum plasterboards E | Shear strength Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Shear method | PN-EN 520 „N” | |
| 1315 | Coatings E | Accelerated ageing cycles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
UV exposure method, method A | PN-EN ISO 4892-2 | |
| 1316 | Coatings E | Accelerated ageing cycles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
UV exposure method, method B | PN-EN ISO 4892-2 | |
| 1317 | Coatings E | Accelerated ageing cycles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
UV exposure method | PN-EN ISO 4892-3 | |
| 1318 | Coatings E | Abrasion resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: Taber | PN-EN ISO 5470-1 | |
| 1319 | Coatings E | Weather and artificial radiation resistance Irradiance Range (0,1 -1,1) W/m2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
UV exposure method | PN-EN ISO 16474-3 | |
| 1320 | Coatings E | Gloss at 20, 60, 85 degree geometry Also in situ Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Photometric method | PN-EN ISO 2813 „N” | |
| 1321 | Coatings E | Adhesion Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Cross-cut method, also in situ | PN-EN ISO 2409 | |
| 1322 | Coatings E | Blistering also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 4628-2 | ||
| 1323 | Coatings E | Cracking also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 4628-4 | ||
| 1324 | Coatings E | Flaking also in situ Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 4628-5 | ||
| 1325 | Coatings E | Chalking Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Visual method, tape method, also in situ | PN-EN ISO 4628-6 | |
| 1326 | Coatings E | Colour, colour difference, metamerism Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Calorimetric method; Spectrophotometer method, also in situ | PN-EN ISO 7724-2 | |
| 1327 | Plastic products E | Accelerated ageing cycles Method A Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
UV exposure method | PN-EN ISO 4892-2 „N” | |
| 1328 | Plastic products E | Accelerated ageing cycles Method B Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
UV exposure method | PN-EN ISO 4892-2 „N” | |
| 1329 | Plastic products E | Accelerated ageing cycles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
UV exposure method | PN-EN ISO 4892-3 | |
| 1330 | Plastic products E | Density Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Method A | PN-EN ISO 1183-1 „N” | |
| 1331 | Plastic products E | Melt mass-flow rate (MFR) Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Method A | PN-EN ISO 1133 „N” | PN-EN ISO 1133-1 | |
| 1332 | Plastic products E | Modulus of elasticity in bending Range up to 50 kN Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Method A | PN-EN ISO 14125 „N” | |
| 1333 | Plastic products E | Modulus of elasticity in bending Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method A | PN-EN 15534-1 | |
| 1334 | Plastic products E | Modulus of elasticity in long-term bending Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 9967 „N” | ||
| 1335 | Plastic products E | Compression modulus Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 604 | ||
| 1336 | Plastic products E | Compressive stress at X% strain Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 604 | ||
| 1337 | Plastic products E | Resistance to liquid chemicals, including water Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
Gravimetric method | PN-EN ISO 175 „N” | |
| 1338 | Plastic products E | Resistance to mould fungi Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 846 „N” | ||
| 1339 | Plastic products E | Vicat softening temperature Range (0 - 90)°C method B50 Liquid – heating medium Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 306 | ||
| 1340 | Plastic products E | Hardness Scale A and D Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Shore method | PN-EN ISO 868 | |
| 1341 | Plastic products E | Charpy impact strength Range hammer 2J and 4J Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 179-1 | ||
| 1342 | Plastic products E | Flexural strength Range up to 50 kN Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: A | PN-EN ISO 178 | |
| 1343 | Plastic products E | Flexural strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15534-1 | ||
| 1344 | Plastic products E | Tensile impact strength Range hammer 25J and 50J Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 8256 „N” | ||
| 1345 | Plastic products E | Compressive strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 604 | ||
| 1346 | Plastic products E | Impact resistance Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15534-1 | ||
| 1347 | Plastic products E | Resistance to moisture uptake after cyclic exposure Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15534-1 | ||
| 1348 | Plastic products E | Swelling and water absorption Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15534-1 | ||
| 1349 | Plastic products E | Flexural strength Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15534-1 | ||
| 1350 | Plastic products E | Compression set Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Method: A, B, C | PN-EN ISO 1856 | |
| 1351 | Plastic products E | Shear modulus (single-specimen arrangement) Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12090 | ||
| 1352 | Plastic products E | Dimensional stability under specified temperature and humidity conditions temp.: (-30 - 150)°C rel. hum. up to 100% Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1604 | ||
| 1353 | Plastic products E | Compressive properties Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 29469 | ||
| 1354 | Plastic products E | Tensile strength perpendicular to the end faces Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1607 | ||
| 1355 | Plastic products E | Shear strength (single-specimen arrangement) Range (20 - 50000) N Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12090 | ||
| 1356 | Reactive fire protection products E | Mass per unit area Range (0,001 - 10) kg Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Gravimetric method | EAD 350005-XX-1104 | |
| 1357 | Reactive fire protection products E | Resistance to cyclically changing environmental conditions temperature up to 80oC rel. humidity up to 90% product type Z1, Z2, Y2 and Y1 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 350005-XX-1104 EAD 350003-XX-1109 | ||
| 1358 | Reactive fire protection products E | Effect of varying environmental conditions: X, Y, Z1, Z2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
EAD 350402-XX-1106 | ||
| Fire Testing Laboratory (LZP) | |||||
| 1359 | Smoke alarm devices | Features of the smoke alarm device according to Table ZA.1 of the standard, excluding clause 5.24.12 for detectors with a supply voltage <=34V | PN-EN 14604:2006+AC:2009, including: cl. 5.10 | PN-EN 60068-2-42:2004 cl. 5.12 and 5.13 | PN-EN 60068-2-6:2008 cl. 5.14 | PN-EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1360 | Voice alarm system control and indicating equipment and installation | Features of the voice alarm control and indicating equipment according to Table ZA.1 of the standard | PN-EN 54-16:2011, including: cl. 13.3 using | PN EN 60529:2003 cl. 16.8 using | PN EN 60068-2-1:2009 cl. 16. 9 and 16.10 using | PN-EN 60068-2-78:2013-11 cl. 16.11 using | PN-EN 60068-2-75:2015-01 cl. 16.12 and 16.13 using | PN-EN 60068-2-6:2008 cl. 16.14 using | PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 16.15 using | PN-EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1361 | Fire detection and fire alarm control and indicating equipment | Features of the fire detection control and indicating equipment according to Table ZA.1 of the standard | PN EN 54-2:2002 +A1:2007, including: cl. 12.3 using | PN-EN 60529:2003 cl. 15.4 using | PN EN 60068-2-1:2009 cl. 15.5 using | PN-EN 60068-2-78:2013-11 cl. 15.6 using | PN-EN 60068-2-75:2015-01 cl. 15.7 and 15.15 using | PN-EN 60068-2-6:2008 cl. 15.8 using | PN-EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1362 | Point heat detector | Characteristics of the point heat detector according to Table ZA.1 of the standard | PN-EN 54-5 +A1:2018-11, including cl. 5.6.1.1 using | PN EN 60068-2-1:2009 cl. 5.6.1.2 using | PN-EN 60068-2-2:2009 cl. 5.6.2.1 using PN–EN 60068-2-30:2008 cl. 5.6.2.2 using | PN-EN 60068-2-78:2013-11E cl. 5.6.3.1 using | PN-EN 60068-2-42:2004 cl. 5.6.4.1 using | PN-EN 60068-2-27:2009 cl. 5.6.4.3 and 5.6.4.4 using | PN-EN 60068-2-6:2008 cl. 5.6.5.1 using | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1363 | Line-type smoke detector | Characteristics of the line smoke detector according to Table ZA.1 of the standard | PN-EN 54-12:2015-05 including cl. 5.6.1.1 using | PN-EN 60068-2-2:2009 cl. 5.6.1.2 using | PN EN 60068-2-1:2009 cl. 5.6.2.1 and 5.6.2.2 using | PN EN 60068-2-78:2013-11E cl. 5.6.3.1 using | PN-EN 60068-2-6:2008 cl. 5.6.3.2 using | PN-EN 60068-2-75:2015-01 cl. 5.6.4 using | PN-EN 50130-4:2012+A1:2015-03 cl. 5.6.5 using | PN-EN 60068-2-42:2004 | ||
| 1364 | Point smoke detector | Characteristics of the point smoke detector according to Table ZA.1 of the standard | PN-EN 54-7:2018-11, including cl. 5.9 using | PN-EN 60068-2-1:2009 cl. 5.10 and 5.11 using | PN EN 60068-2-78:2013E cl. 5.12 using | PN-EN 60068-2-42:2004 cl. 5.13 using | PN-EN 60068-2-27:2009 cl. 5.15 and 5.16 using | PN EN 60068-2-6:2008 cl. 5.17 using | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1365 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Kc - Sulfur dioxide test for contacts and connections | PN-EN 60068-2-42:2004 | ||
| 1366 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to radio-frequency electromagnetic field in the frequency range from 80 MHz to 1 GHz at field strengths up to 30 V/m | PN-EN 61000-4-3:2007+ A1:2008 + A2:2011 + IS1:2009 | PN-EN IEC 61000-4-3:2021-06 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1367 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to radio-frequency electromagnetic field in the frequency range from 1 GHz to 3 GHz at field strengths up to 20 V/m in a measurement area with dimensions (at a deviation of +/-3dB) 1,15 x 1,15 x 0,60 [m] |
PN-EN 61000-4-3:2007+ A1:2008 + A2:2011 + IS1:2009 | PN-EN IEC 61000-4-3:2021-06 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1368 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to power-frequency magnetic field | PN-EN 61000-4-8:2010 | ||
| 1369 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to voltage surges (high-energy impulse disturbances) | PN-EN 61000-4-5:2014-10+A1:2018-01 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1370 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to electrostatic discharge | PN-EN 61000-4-2:2011 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1371 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to conducted disturbances induced by radio-frequency fields, conducted sinusoidal disturbances in the frequency range from 150 kHz to 230 MHz | PN-EN 61000-4-6:2014-04 | PN-EN 61000-4-6:2024-03 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1372 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to electrical fast transient/burst disturbances | PN-EN 61000-4-4:2010 | PN-EN 61000-4-4:2013-05 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1373 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Immunity to voltage dips, short interruptions and supply voltage variations | PN-EN 61000-4-11:2007+A1:2017-09 | PN-EN IEC 61000-4-11:2020-11+AC:2020-12+AC:2023-01 | PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1374 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Db - damp heat, cyclic – operational | PN-EN 60068-2-30:2008 | ||
| 1375 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Db - damp heat, cyclic – endurance | PN-EN 60068-2-30:2008 | ||
| 1376 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test A - cold - operational | PN-EN 60068-2-1:2009 | ||
| 1377 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test B - dry heat – endurance | PN-EN 60068-2-2:2009 | ||
| 1378 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test B - dry heat – operational | PN-EN 60068-2-2:2009 | ||
| 1379 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Cab - damp heat, steady state – endurance | PN-EN 60068-2-78:2013-11 | ||
| 1380 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Cab - damp heat, steady state - operational | PN-EN 60068-2-78:2013-11 | ||
| 1381 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Degrees of protection provided by enclosures (IP code), Range up to IP 46 | PN-EN 60529:2003 | PN-EN 60529:2003+AC:2017-12 | ||
| 1382 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Ea – single shock (half-sine) (6 - 25) ms | PN EN 60068-2-27:2009 | ||
| 1383 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Eh - impact (spring hammer) | PN-EN 60068-2-75:2015-01 | ||
| 1384 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Test Fc – sinusoidal vibration | PN-EN 60068-2-6:2008 | ||
| 1385 | Components and systems of automation, fire alarm systems, electrical installations, electrical and electronic equipment, including among others: control panel for smoke extraction and ventilation equipment, smoke ventilation controller; control panel for fire protection equipment; manual smoke extraction call point; network of fire alarm control panels; integrating systems; parallel signalling panel; power supply equipment in fire automation systems; remote signalling and control equipment; remote firefighter microphone, system operator console | Mains voltage variations Voltage variation range -15%, +10% Un |
PN-EN 50130-4:2012+ A1:2015-03 | ||
| 1386 | Smoke vents | Testing of smoke vents at low ambient temperature. Testing of the complete smoke vent. | PN-EN 12101-2:2005 | ||
| 1387 | Short-circuit isolators | Characteristics of the short-circuit isolator according to Table ZA.1 of the standard | PN-EN 54-17:2007, including cl. 5.4 using | PN EN 60068-2-2:2009 cl. 5.5. using | PN EN 60068-2-1:2009 cl. 5.6 | PN EN 60068-2-30:2008 cl. 5.7 using | PN-EN 60068-2-78:2013-11 cl. 5.8 using | PN-EN 60068-2-42:2004 cl. 5.9 using | PN EN 60068-2-27:2009 cl. 5.11 and 5.12 using | PN-EN 60068-2-6:2008 cl. 5.13 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1388 | Manual call point | Features of the manual call point according to Table ZA.1 of the standard | PN-EN 54-11:2004 +A1:2006 including cl. 4.4.1. using | PN EN 894-3:2002 | PN EN 894-3+A1:2010 cl. 5.7. and 5.8 using | PN-EN 60068-2-2:2009 cl. 5.9 using | PN EN 60068-2-1: 2009 cl. 5.10, 5.11 using | PN-EN 60068-2-30:2008 cl. 5.12 using | PN-EN 60068-2-78:2013-11 cl. 5.13 using | PN-EN 60068-2-42:2004 cl. 5.14 using | PN-EN 60068-2-27:2009 cl. 5.16. and 5.17. using | PN EN 60068-2-6:2002 cl. 5.18 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1389 | Alarm transmission equipment and systems | Features of the alarm transmission equipment and system according to Table ZA.1 of the standard | PN-EN 54-21:2009, including: cl. 7.3 using | PN-EN 60529:2003 cl. 7.6 using | PN EN 54-2:2002 +A1:2007 cl. 9 using | PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 10.4 using | PN EN 60068-2-1:2009 cl. 10.5 using | PN-EN 60068-2-78:2013-11 cl. 10.6 using | PN-EN 60068-2-75:2015-01 cl. 10.7 using | PN-EN 60068-2-6:2008 cl. 10.8 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 cl. 10.9 using | PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 10.10 using | PN-EN 60068-2-78:2013-11 cl. 10.11 using | PN-EN 60068-2-6:2008 | ||
| 1390 | Input/output devices | Features of the input/output device according to Table ZA.1 of the standard | PN-EN 54-18:2007+ AC:2007 | PN-EN 12101-10:2007 +AC :2007, including: cl. 5.3 using | PN-EN 60068-2-2:2009 cl. 5.4 using | PN-EN 60068-2-1:2009 cl. 5.5 using | PN-EN 60068-2-30:2008 cl. 5.6 using | PN-EN 60068-2-78:2013-11 cl. 5.7 using | PN-EN 60068-2-42:2004 cl. 5.8 using | PN-EN 60068-2-27:2009 cl. 5.9 using | PN-EN 60068-2-75:2015-01 cl. 5.10 and 5.11 using | PN-EN 60068-2-6:2008 cl. 5.12 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1391 | Power supply | Features of the power supply equipment according to clauses 11, 12.1 , 12.3.1, 12.4, 12.5, 12.6, 12.7, 12.8, 12.9, 12.10,12.13 , 12.14, 12.15 of the standard and Table ZA.1 | PN-EN 12101-10:2007 +AC :2007, including cl. 12.4 using | PN-EN 60068-2-1:2009 cl. 12.5 using | PN-EN 60068-2-78:2013-11 cl. 12.6 using | PN-EN 60068-2-75:2015-01 cl. 12.7 and 12.9 using | PN-EN 60068-2-6:2008 cl. 12.8. using | PN-EN 60068-2-78:2013-11 cl. 12.10. using | PN-EN 60068-2-2:2009 cl. 12.13 and 12.14 using | PN-EN 60529:2003 cl. 12.15 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1392 | Power supply | Features of the power supply equipment according to Table ZA.1 of the standard | PN-EN 54-4:2001 + A1:2004 + A2:2007, including cl. 9.5, using | PN-EN 60068-2-1:2009 cl. 9.6 and 9.14 using | PN-EN 60068-2-78:2013-11 cl. 9.7 using | PN-EN 60068-2-75:2015-01 cl. 9.8 and 9.15 using | PN-EN 60068-2-6:2008 cl. 9.9 using | PN EN 50130-4:2002 + A2:2007 | PN-EN 50130-4:2012+A1:2015-03 | ||
| 1393 | Roofs | Resistance of roofs to external fire extent and type of damage flame spread flaming droplets penetration Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-ENV 1187:2004 „N” Methods 1, 2 and 3 | ||
| 1394 | Road traffic noise reducing devices | Resistance to brush fire extent and type of damage flame spread |
PN-EN 1794-2:2011 Annex A | ||
| 1395 | Electric cables and wires | Fire resistance testing of cables and wires without special protection (classification P) | PN-EN 50577:2016-02 | PN-EN 13501-3:2026-01 | ||
| 1396 | Smoke vents | Operating effectiveness of smoke vents active surface |
PN-EN 12101-2 :2017 | PN-EN 12101-2 :2005 | ||
| 1397 | Ventilation grilles | Fire resistance | PN-EN 1364-5:2017-08 | PN-EN 13501-2:2023-09 | ||
| 1398 | Fire protection systems for steel beams with web openings | Fire protection effectiveness of the fire protection of steel elements – time to reach the temperature | PN-EN 13381-9:2015-08 | PN-EN 13501-2:2023-09 | ||
| 1399 | Seals for linear joints | Fire integrity, fire insulation flame persistence holes and cracks ignition of the cotton wool pad maximum temperature rise Movement capability Regulated area: „N” – Test method used in activities relevant to notification according to Regulation (EU) No. 305/2011 of the European Parliament and of the Council of March 9, 2011. |
PN-EN 15882-4:2012E „N” | ||
| 1400 | Construction products | Smouldering | PN-EN 16733:2016-06 | ||
| 1401 | Construction, structural and finishing products | Toxicity of decomposition and combustion products determination of concentrations and mass emission (CO, CO2, HCN, HCl, NH3 and SO2) toxicometric indices |
PN-88/B-02855 | ||
| 1402 | Balconies E | Fire load-bearing capacity R - maximum load 400T deformation rate of deformation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1365-5 | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1403 | Beams E | Fire load-bearing capacity R - maximum load 400T deformation rate of deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1365-3 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1404 | Roofs E | Resistance of roofs to external fire extent and type of damage flame spread flaming droplets penetration Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
CEN/TS 1187 „N” Methods 1, 2 and 3 | PN-EN 15725 CEN/TS 16459 | PN-EN 13501-5 | ||
| 1405 | Road traffic noise reducing devices E | Resistance to brush fire extent and type of damage flame spread Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1794-3 | ||
| 1406 | External and internal walls E | Degree of fire spread through walls extent and type of damage flame spread temperature on lines L1 and L2 Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-B-02867 | ||
| 1407 | Smoke control doors, gates and shutters E | Smoke control, self-closing, automatic closing, release function (ability to release) flow rate self-closing ability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1634-3 „N” | PN-EN 16034 | PN-EN 15269-1 | PN-EN 15269-20 | PN-EN 17020-4 | PN-EN 15725 | PN-EN 13501-2 | ||
| 1408 | Landing doors for lifts E | Fire integrity, fire insulation, radiation intensity flame persistence CO2 leaks mean temperature rise maximum temperature rise irradiance deformation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 81-58 | ||
| 1409 | Electrical cables and wires E | Vertical flame spread on a single insulated wire or cable extent and type of damage flame spread flaming droplets Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 60332-1-3 | PN-EN 60332-1-1 | PN-EN 60332-1-2 „N” | PN-EN 60695-11-2 | PN-EN 60332-2-1 | PN-EN 60332-2-2 | PN-EN 50576 | PN-EN 13501-6 | ||
| 1410 | Electrical cables and wires E | Gross calorific value temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 1716 „N” | PN-EN 50576 | PN-EN 13501-6 | ||
| 1411 | Electrical cables and wires E | Circuit integrity under fire conditions lifetime attenuation Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-IEC 60331-21 | PN-IEC 60331-23 | PN-IEC 60331-25 | ||
| 1412 | Electrical cables and wires E | Continuity of power and signal supply time to ensure continuity of power and/or signal supply Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
DIN 4102-12 | ||
| 1413 | Electrical cables and wires E | Heat release, smoke release, flame spread heat release smoke production falling flaming particles flame spread sample extinction time Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 50399 „N” | PN-EN IEC 60332-3-10 | PN-EN IEC 60332-3-21 | PN-EN IEC 60332-3-22 | PN-EN IEC 60332-3-23 | PN-EN IEC 60332-3-24 | PN-EN IEC 60332-3-25 | PN-EN 50576 | PN-EN 13501-6 | ||
| 1414 | Electrical cables and wires E | Smoke generation transmittance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 61034-2 „N” | PN-EN 61034-1 | PN-EN 50576 | PN-EN 13501-6 | ||
| 1415 | Service ducts and shafts E | Fire integrity, fire insulation flame persistence holes and cracks ignition of the cotton wool pad maximum/average temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-5 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1416 | Smoke vents E | Operational reliability Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-2 | ||
| 1417 | Smoke vents E | Resistance of smoke vents to high temperature opening time to the smoke extraction position reduction of opening area Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-2 | PN-EN 13501-4 | ||
| 1418 | Smoke vents E | Operational reliability under wind load opening time Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-2 | ||
| 1419 | Smoke vents E | Operational reliability under load opening time Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-2 | ||
| 1420 | Smoke control dampers in fire ventilation systems E | Fire integrity, fire insulation, smoke tightness flame persistence holes and cracks ignition of the cotton wool pad maximum/average temperature rise flow rate/leaks retention of cross-section Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-10 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 1751 | PN-EN 13501-4 | ||
| 1421 | Smoke curtains E | Stability of smoke curtains reliability and durability default transition to the working position response and operating time smoke permeability use of feeler gauges persistence of flaming collapse occurrence of flaming droplets or particles Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-1 | PN-EN 13501-4 | ||
| 1422 | Upholstery and filling used in upholstered seats, armchairs, chairs E | Ignitability of upholstered furniture flaming combustion progressive smouldering Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1021-1 | PN-EN 1021-2 | ||
| 1423 | Vertical membranes E | Fire protection effectiveness of a vertical membrane time to reach critical temperature Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13381-2 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1424 | Horizontal membranes E | Fire protection effectiveness of a horizontal membrane time to reach critical temperature Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13381-1 „N” | PN-EN 13501-2 | ||
| 1425 | Coverings E | Fire protection capability time to reach critical temperature Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 14135 „N” | PN-EN 13501-2 | ||
| 1426 | Building hardware E | Suitability for use in fire-resistant/smoke control doors fire integrity fire insulation risk of ignition maintaining the closing force resistance to load Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1634-2 „N” | PN-EN 1363-1 | PN-EN 1363-2 | ||
| 1427 | Gypsum plasterboards E | Core cohesion under high temperature occurrence of failure Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 520 „N” | ||
| 1428 | Raised access floors and raised floors E | Fire load-bearing capacity, fire integrity, fire insulation deformation D rate of deformation dD/dt flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-6 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1429 | Floorings and floor coverings E | Fire properties, Radiant panel method critical heat flux smoke production Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 9239-1 „N” | PN-EN 13501-1 | ||
| 1430 | Sheaths and insulation used in electric cables E | Acidity of gases evolved during combustion of materials from electric cables by measurement of pH and conductivity Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 60754-2 „N” | PN-EN 50576 | PN-EN 13501-6 | ||
| 1431 | Sheaths and insulation used in electric cables E | Content of acidic halogen gas formed during combustion of materials of electric cables Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 60754-1 | ||
| 1432 | Fire doors, gates, shutters and openable windows E | Fire integrity, fire insulation, radiation intensity, self-closing, automatic closing, release function (ability to release) flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise irradiance effect of mechanical action self-closing capability deformation + Also using the manufacturer's equipment Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1634-1 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 16034 | PN-EN 15269-1 | PN-EN 15269-2 | PN-EN 15269-3 | PN-EN 15269-5 | PN-EN 15269-7 | PN-EN 15269-10 | PN-EN 15269-11 | PN-EN 17020-4 | PN-EN 15725 | PN-EN 13501-2 | ||
| 1433 | Fire dampers E | Fire integrity, fire insulation, smoke tightness flame persistence holes and cracks ignition of the cotton wool pad maximum/average temperature rise flow rate/leaks Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-2 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-3 | ||
| 1434 | Fire dampers E | Reliability/durability under repeated opening and closing Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 15650, Annex C | ||
| 1435 | Wires and cables in protective circuits E | Flammability, continuity of power supply lifetime Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 50200 | PN-EN 13501-3 | ||
| 1436 | Smoke extraction ducts E | Fire integrity, fire insulation, smoke tightness flame persistence holes and cracks ignition of the cotton wool pad maximum/average temperature rise flow rate/leaks mechanical stability retention of cross-section Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-8 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-4 | ||
| 1437 | Single compartment smoke extraction ducts E | Fire integrity, smoke tightness flow rate/leaks mechanical stability retention of cross-section Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-9 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-4 | ||
| 1438 | Ventilation ducts E | Fire integrity, fire insulation, smoke tightness flame persistence holes and cracks ignition of the cotton wool pad maximum/average temperature rise flow rate/leaks Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-1 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 15882-1 | PN-EN 15725 | PN-EN 13501-3 | ||
| 1439 | Stairs E | Fire load-bearing capacity R - maximum load 400T deformation D rate of deformation dD/dt Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 1365-6 | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1440 | Poles E | Fire load-bearing capacity R - maximum load 500T deformation C deformation rate dC/dt Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1365-4 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1441 | Floors and roofs E | Fire load-bearing capacity R - maximum load 400T, fire integrity, fire insulation, radiation intensity deformation D rate of deformation dD/dt flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise irradiance Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1365-2 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 13501-2 | ||
| 1442 | Suspended ceilings E | Fire integrity, fire insulation flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1364-2 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 15254-7 | PN-EN 15725 | PN-EN 13501-2 | ||
| 1443 | Cabinets for pressurized gas cylinders E | Fire resistance temperature inside the cabinet Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14470-2 | ||
| 1444 | Conveyor systems and their closures E | Fire integrity, fire insulation, radiation intensity, self-closing, automatic closing, release function self-closing flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise self-closing capability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-7 „N” | PN-EN 1363-1 | PN-EN 1363-2 | ||
| 1445 | Partition walls E | Fire integrity, fire insulation, radiation intensity, resistance to mechanical impact flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise irradiance deformation + Also using the manufacturer's equipment Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1364-1 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 15254-2 „N” | PN-EN 15254-5 „N” | PN-EN 15254-3 | PN-EN 15254-4 | PN-EN 15725 | PN-EN 13501-2 | ||
| 1446 | Curtain walls E | Fire integrity, fire insulation, radiation intensity flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise irradiance deformation + Also using the manufacturer's equipment Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1364-3 „N” | PN-EN 1364-4 „N” | PN-EN 1363-1 | PN-EN 1363-2 | PN-EN 15254-6 | PN-EN 15725 | PN-EN 13501-2 | ||
| 1447 | Loadbearing walls E | Fire load-bearing capacity R - maximum load 500T, fire integrity, fire insulation, radiation intensity, resistance to mechanical impact deformation C deformation rate dC/dt flame persistence holes and cracks ignition of the cotton wool pad mean temperature rise maximum temperature rise irradiance effect of mechanical action deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1365-1 „N” | PN-EN 1363-2 | PN-EN 1363-1 | PN-EN 15725 | PN-EN 15080-12 | PN-EN 13501-2 | ||
| 1448 | Penetration seals E | Fire integrity, fire insulation flame persistence holes and cracks ignition of the cotton wool pad maximum temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-3 „N” | PN-EN 1363-1 | PN-EN 1363-2 EAD 350454-XX-1104 „N” | PN-EN 15725 | PN-EN 13501-2 | ||
| 1449 | Linear joint seals E | Fire integrity, fire insulation flame persistence holes and cracks ignition of the cotton wool pad maximum temperature rise Movement capability Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 1366-4 „N” | PN-EN 1363-1 | PN-EN 1363-2 EAD 350141-XX-1106 „N” | PN-EN 15725 | PN-EN 13501-2 | ||
| 1450 | Smoke extraction fans E | Effectiveness at high temperature effectiveness at high temperature Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 12101-3 | PN-EN 13501-4 | ||
| 1451 | Void formers E | Fire integrity, fire insulation flame persistence ignition of the cotton wool pad maximum temperature rise deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
EOTA TR031 „N” | ||
| 1452 | Construction, structural and finishing products E | Gross calorific value temperature rise Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 1716 „N” | PN-EN 13501-1 | ||
| 1453 | Construction, structural and finishing products E | Non-combustibility relative mass loss temperature rise burning time Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 1182 „N” | PN-EN 13501-1 | ||
| 1454 | Construction, structural and finishing products E | Heat release, smoke release Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
Cone calorimeter method - heat release - smoke production - time to ignition | ISO 5660-1 | |
| 1455 | Construction, structural and finishing products E | Ignitability by the single-flame method flame reach occurrence of flaming droplets Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN ISO 11925-2 „N” | PN-EN 13501-1 | ||
| 1456 | Intumescent construction products E | Swelling pressure Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
EOTA TR024 „N” | ||
| 1457 | Intumescent construction products E | Swelling height Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
EOTA TR024 „N” | ||
| 1458 | Construction, structural and finishing products excluding floorings E | Heat release, smoke release, lateral flame spread, dripping and falling off heat release smoke production falling flaming particles/droplets flame spread surface flaming Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13823 „N” | PN-EN 13501-1 | ||
| 1459 | Construction, structural and finishing products excluding floorings E | Release of: heat, smoke, CO, CO2; time to flashover heat release smoke production falling flaming particles/droplets flame spread surface flaming time to flashover Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN 14390 | ||
| 1460 | Fire protection of concrete elements E | Fire protection effectiveness of fire protection for concrete members time to reach critical temperature and deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-ENV 13381-3 „N” | PN-EN 13381-3 „N” | PN-EN 1363-1 „N” | PN-EN 1363-2 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N” | PN-EN 13501-2 | ||
| 1461 | Fire protection of timber elements E | Fire protection effectiveness of fire protection for timber members time to reach critical temperature and deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-ENV 13381-7 „N” | PN-EN 13381-7 „N” | PN-EN 1363-1 „N” | PN-EN 1363-2 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N” | PN-EN 13501-2 | ||
| 1462 | Fire protection of steel elements E | Fire protection effectiveness of fire protection for steel members time to reach critical temperature and deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13381-8 „N” | PN-ENV 13381-4 „N” | PN-EN 13381-4 „N” | PN-EN 1363-1 „N” | PN-EN 1363-2 „N” EAD 350402-XX-1106 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N” | PN-EN 13501-2 | ||
| 1463 | Fire protection of flat composite elements of concrete with profiled sheeting E | Fire protection effectiveness of fire protection for flat composite members of concrete with profiled steel sheet time to reach critical temperature and deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13381-5 „N” | PN-EN 1363-1 „N” | PN-EN 1363-2 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N” | PN-EN 13501-2 | ||
| 1464 | Fire protection of concrete-filled hollow section steel columns E | Fire protection effectiveness of fire protection for concrete-filled hollow section steel columns time to reach critical temperature and deformation Regulated area: E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. "N" – Test method used in activities relevant to notification under Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011. |
PN-EN 13381-6 „N” | PN-EN 1363-1 „N” | PN-EN 1363-2 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N” | PN-EN 13501-2 | ||
| 1465 | Curtains, drapes, drop curtains, films, tent fabrics, awnings E | Flammability rating of flexible products extent of flame spread time to ignition Regulated area: E – Flexible scope of accreditation. Flexible scope includes the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. A list of activities conducted under the flexible scope of accreditation shall be made publicly available or available on request by the accredited body. |
PN-EN ISO 6941 | PN-EN ISO 6940 | ||
| Test methods | |||||
| 1466 | Resistance to external fire Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
TS 1187 | |||
| 1467 | Fire resistance Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 1365-3 | EN 1634-1 | EN 1634-3 | EN 1366-5 | EN 1366-2 | EN 1366-10 | EN 13381-2 | EN 1364-2 | EN 1364-3 | EN 1364-4 | EN 14135 | EN 1634-2 | EN 1366-6 | EN 1366-1 | EN 1366-9 | EN 1366-8 | EN 1365-4 | EN 1365-2 | EN 1366-7 | EN 1364-1 | EN 1366-3 | EN 1366-4 | EN 13381-1 | EN 13381-3 | EN 13381-4 | EN 13381-5 | EN 13381-6 | EN 13381-7 | EN 13381-8 | |||
| 1468 | Reaction to fire Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN ISO 1716 | EN ISO 1182 | EN ISO 11925-2 | EN ISO 9239-1 | EN 13823 | |||
| 1469 | Sound insulation Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN ISO 10140-1 | EN ISO 10140-3 | |||
| 1470 | Sound absorption Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN ISO 354 | |||
| 1471 | Emission of dangerous substances Regulated area: Type of activity: ASSESSMENT OF PERFORMANCE. Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Essential characteristic / Technical specification. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. |
EN 16516 | |||
| 1472 | Gypsum products | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 95/467/EC Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 520 | EN 12859 | EN 12860 | EN 12860 | EN 13279-1 | EN 13658-1 | EN 13658-2 | EN 13815 | EN 13915 | EN 13950 | EN 13963 | EN 13963 | EN 14190 | EN 14195 | EN 14195 | EN 14209 | EN 14246 | EN 14246 | EN 14353 | EN 14496 | EN 15283-1 | EN 15283-2 | ||
| 1473 | Sanitary appliances | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 96/578/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 1825-1 | EN 1825-1 | EN 858-1 | EN 858-1 | ||
| 1474 | Street furniture | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 96/579/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12676-1 | EN 12676-1 „D” | EN 14388 „O”, „D” | ||
| 1475 | Curtain walling | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 96/580/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13830 „Z”, „O”, „D” | ||
| 1476 | Structural timber products | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 97/176/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 14592 „O” | ||
| 1477 | Wood-based panels | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 97/462/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13986 | ||
| 1478 | Structural products for drainage and sewerage outside buildings | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 97/464/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12566-1 “O” | EN 12566-1 “O” | EN 12566-3 “O” | EN 12566-4 | EN 12566-6 | EN 1433 | EN 1433 | ||
| 1479 | Masonry products and related products | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 97/740/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 845-1 „T” | EN 845-2 „T” | EN 845-3 | EN 15824 | ||
| 1480 | Floor coverings | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 97/808/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12057 | EN 12058 | EN 13454-1 | EN 13813 | EN 14016-1 | EN 14041 | EN 14041 | EN 14342 | EN 14411 | EN 14904 | EN 1344 | EN 1344 | ||
| 1481 | Roofing, skylights, roof windows and accessories | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 98/436/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12326-1 | EN 1304 | EN 14351-1 „O”, „Z”, „D” | EN 14509 | EN 14782 | EN 14783 | EN 14963 „O” „Z” | EN 14964 | EN 1873 „O” „Z” | EN 490 | EN 492 | EN 494 | EN 516 | EN 534 | EN 544 | EN 1013 | EN 16153 | ||
| 1482 | Finishing of interior, exterior walls and ceilings | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 98/437/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12467 | EN 13245-2 | EN 13964 | EN 14411 | EN 14509 | EN 1469 | EN 14716 | EN 14915 | EN 15102 | EN 438-7 | EN 1013 | EN 16153 | EN 15286 | ||
| 1483 | Road construction products | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 98/601/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13108-1 | EN 13108-2 | EN 13108-3 | EN 13108-4 | EN 13108-5 | EN 13108-6 | EN 13108-7 | ||
| 1484 | Membranes | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/90/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13707 | EN 13859-1 | EN 13859-2 | EN 13956 | EN 13967 | EN 13969 | EN 13970 | ||
| 1485 | Membranes | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/90/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13984 | EN 14909 | EN 14967 | EN 14891 | EN 15814 | ||
| 1486 | Thermal insulation products | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/91/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 13162 | EN 13163 | EN 13164 | EN 13165 | EN 13166 | EN 13167 | EN 13168 | EN 13169 | EN 13170 | EN 13171 | EN 14063-1 | EN 14064-1 | EN 14303 | EN 14304 | EN 14305 | EN 14306 | EN 14307 | EN 14308 | EN 14309 | EN 14313 | EN 14314 | EN 14316-1 | EN 14317-1 | EN 14933 | EN 14934 | EN 14315-1 | EN 14318-1 | EN 14319-1 | EN 14320-1 | EN 15732 | EN 16069 | EN 15501 | ||
| 1487 | Doors, windows, shutters, blinds, gates and related building hardware | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/93/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 14351-1 „O”, „Z”, „D” | EN 13241 „O”, „Z”, „D” | ||
| 1488 | Precast products of normal-weight/lightweight/autoclaved aerated concrete | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/94/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 15037-5 | ||
| 1489 | Products related to concrete, mortar and grout | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/469/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 14889-1 | EN 14889-2 | EN 1504-2 | EN 1504-3 | EN 1504-4 | EN 1504-6 | ||
| 1490 | Construction adhesives | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/470/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 12004 | ||
| 1491 | Pipes, tanks and ancillary equipment not in contact with water intended for human consumption | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 99/472/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 295-1 | EN 295-4 | EN 295-5 | EN 295-7 | ||
| 1492 | Flat and profiled glass products and glass panels | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 2000/245/EC E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 1096-4 | EN 12150-2 | EN 12337-2 | EN 1279-5 | EN 13024-2 | EN 14178-2 | EN 14179-2 | EN 14321-2 | EN 14449 “Z” | EN 1748-1-2 “Z” | EN 1748-2-2 “Z” | EN 1863-2 “Z” | EN 572-9 “Z” | EN 15682-2 | EN 15683-2 | ||
| 1493 | Sealants for non-structural use in joints in buildings and pedestrian walkways | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 2011/19/EU E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 15651-1 | EN 15651-2 | EN 15651-4 | EN 15651-3 | ||
| 1494 | Power cables, control cables and communication cables | ASSESSMENT OF PERFORMANCE ON THE BASIS OF TESTS, CALCULATIONS, TABULATED VALUES OR DESCRIPTIVE DOCUMENTATION OF THE CONSTRUCTION PRODUCT (System 3) Commission decision number 2011/284/WE E Regulated area: Reference document: Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC. Commission decision number / Product(s) / Harmonised technical specifications. The current "List of tests performed in the manufacturer's laboratories/external laboratories" is available on request at any time from the accredited body. "Z" - The competence of the laboratory to perform tests in the manufacturer's laboratories/external laboratories has been confirmed. "O" / "T" / "D" – The competence of the laboratory to assess the performance of the product on the basis of calculations / tabulated values / documentation of the construction product has been confirmed. The laboratory meets the requirements of Regulation No 305/2011 of 9 March 2011 for the activities provided for a testing laboratory (Annex V, point 2, subpoint 3 of Regulation No 305/2011) in the above scope. E – Flexible scope of accreditation. The flexibility of the scope covers the elements indicated in document DA-10 for the scope of accreditation of testing laboratories. The list of activities performed within the flexible scope of accreditation is made available publicly or on request by the accredited body. |
EN 50575 | ||
Reference standards (1158)
*
AAMA 501.2
AAMA/WDMA/CSA 101/I.S.2/A440-22
AAMA/WDMA/CSA 101/I.S.2/A440-22+ ASTM E2068-00(2022)
AAMA/WDMA/CSA 101/I.S.2/A440:22
ASTM E2068-00(2022)
ASTM E283/E283M-19
ASTM E330/E330M-14(2021)
ASTM E331-00(2023)
ASTM E547-00(2016)
BS 1377-2:2022
CEN/TS 1187 „N” Methods 1, 2 and 3
CEN/TS 15676
DIN 4102-12
DIN 51130
EAD 020002-XX-0404
EAD 040016-XX-0404
EAD 040083-XX-0404
EAD 040083-xx-0404 EAD 040287-xx-0404
EAD 090062-XX-0404
EAD 090062-XX-0404 EAD 040914-XX-0404
EAD 210005-00-0505
EAD 210005-XX-0505
EAD 220089-XX-0401
EAD 330046-xx-0602 EAD 330047-xx-0602
EAD 330076-xx-0604
EAD 330087-xx-0601
EAD 330196-xx-060
EAD 330196-xx-0604
EAD 330232-xx-0601 EAD 330747-xx-0601 + TR048
EAD 330284-xx-0604+TR64
EAD 330499-xx-0601
EAD 350005-XX-1104
EAD 350005-XX-1104 EAD 350003-XX-1109
EAD 350140-XX-1106
EAD 350402-XX-1106
EN 1013
EN 1096-4
EN 12004
EN 12057
EN 12058
EN 12150-2
EN 12326-1
EN 12337-2
EN 12467
EN 12566-1 “O”
EN 12566-3 “O”
EN 12566-4
EN 12566-6
EN 12676-1
EN 12676-1 „D”
EN 1279-5
EN 12859
EN 12860
EN 13024-2
EN 1304
EN 13108-1
EN 13108-2
EN 13108-3
EN 13108-4
EN 13108-5
EN 13108-6
EN 13108-7
EN 13162
EN 13163
EN 13164
EN 13165
EN 13166
EN 13167
EN 13168
EN 13169
EN 13170
EN 13171
EN 13241 „O”, „Z”, „D”
EN 13245-2
EN 13279-1
EN 13381-1
EN 13381-2
EN 13381-3
EN 13381-4
EN 13381-5
EN 13381-6
EN 13381-7
EN 13381-8
EN 1344
EN 13454-1
EN 1364-1
EN 1364-2
EN 1364-3
EN 1364-4
EN 1365-2
EN 1365-3
EN 1365-4
EN 13658-1
EN 13658-2
EN 1366-1
EN 1366-10
EN 1366-2
EN 1366-3
EN 1366-4
EN 1366-5
EN 1366-6
EN 1366-7
EN 1366-8
EN 1366-9
EN 13707
EN 13813
EN 13815
EN 13823
EN 13830 „Z”, „O”, „D”
EN 13859-1
EN 13859-2
EN 13915
EN 13950
EN 13956
EN 13963
EN 13964
EN 13967
EN 13969
EN 13970
EN 13984
EN 13986
EN 14016-1
EN 14041
EN 14063-1
EN 14064-1
EN 14135
EN 14178-2
EN 14179-2
EN 14190
EN 14195
EN 14209
EN 14246
EN 14303
EN 14304
EN 14305
EN 14306
EN 14307
EN 14308
EN 14309
EN 14313
EN 14314
EN 14315-1
EN 14316-1
EN 14317-1
EN 14318-1
EN 14319-1
EN 14320-1
EN 14321-2
EN 1433
EN 14342
EN 14351-1 „O”, „Z”, „D”
EN 14353
EN 14388 „O”, „D”
EN 14411
EN 14449 “Z”
EN 14496
EN 14509
EN 14592 „O”
EN 1469
EN 14716
EN 14782
EN 14783
EN 14889-1
EN 14889-2
EN 14891
EN 14904
EN 14909
EN 14915
EN 14933
EN 14934
EN 14963 „O” „Z”
EN 14964
EN 14967
EN 15037-5
EN 1504-2
EN 1504-3
EN 1504-4
EN 1504-6
EN 15102
EN 15283-1
EN 15283-2
EN 15286
EN 15501
EN 15651-1
EN 15651-2
EN 15651-3
EN 15651-4
EN 15682-2
EN 15683-2
EN 15732
EN 15814
EN 15824
EN 16069
EN 16153
EN 1634-1
EN 1634-2
EN 1634-3
EN 16516
EN 1748-1-2 “Z”
EN 1748-2-2 “Z”
EN 1825-1
EN 1863-2 “Z”
EN 1873 „O” „Z”
EN 295-1
EN 295-4
EN 295-5
EN 295-7
EN 438-7
EN 490
EN 492
EN 494
EN 50575
EN 516
EN 520
EN 534
EN 544
EN 572-9 “Z”
EN 845-1 „T”
EN 845-2 „T”
EN 845-3
EN 858-1
EN ISO 10140-1
EN ISO 10140-3
EN ISO 1182
EN ISO 11925-2
EN ISO 1716
EN ISO 354
EN ISO 9239-1
EOTA TR 024:2006 amended 2009
EOTA TR 24:2006 amended 2009
EOTA TR024 „N”
EOTA TR031 „N”
ETAG 016:2004 part 1
ETAG 016:2004 part 2
ETAG 016:2004 part 2 ETAG 016:2004 part 3
ETAG 016:2004 part 2 ETAG 016:2004 part 3 TR001
ETAG 016:2004 part 3
ISO 10136-1:1993
ISO 16000-3
ISO 16000-3 „N”
ISO 16000-3:2022
ISO 16000-6
ISO 16000-6 „N”
ISO 16000-6:2021
ISO 4316:1977
ISO 5660-1
PB LB-010/3/08-2010
PB LB-011/3/08-2010
PB LB-011/4/12-2024
PB LD-006/2/01-1999
PB LK-131
PB LK-131/2/02-2015
PB LK-139
PB LK-139 EAD 020002-XX-0404
PB LL-CUAP 06.02/03/10/1/10-2008
PB LL-CUAP 06.02/08/10/1/10-2008
PB LOK-B00/3/03-2018
PB LOK-B00/3/03-2018 + PN-EN 14592:2022-09
PB LOK-B07/4/03-2018
PB LOK-B10/2/03-2018
PB LOK-B11/1/03/2015
PB LOK-B52/2/11-2018
PB LOW-001/4/09-2007
PB LOW-002/5/07-2014
PB LOW-003/5/07-2014
PB LOW-004/5/07-2014
PB LOW-005/4/09-2007
PB LOW-006/4/09-2007
PB LOW-007/4/09-2007
PB LOW-008/5/07-2014
PB LOW-012/6/07-2014
PB LOW-018
PB LOW-019
PB LOW-T01/3/09-2007
PB LW-012/2/02-2009
PB LW-013/2/02-2009
PB LW-014/2/02-2009
PB LZE 144/2/12-2024
PB LZE-015/5/12-2019
PB LZE-078/9/04-2018
PB LZE-105/2/04-2019
PB LZE-120/4/04-2018
PB LZE-122/3/04-2018
PB LZE-123/3/04-2018
PB LZE-140/2/04-2019
PB LZE-145/2/12-2024
PB LZF 002/4/04-2022
PB LZK-130/3/03-2018 „N”
PB–LZK 001/4/04-2021
PKN-CEN ISO/TS 17892-5:2009
PKN-CEN/TS 12390-9
PN EN 1097-2
PN EN 15457: 2014 +PB LM-004/02/03-2015
PN EN 15458:2014 +PB LM-005/02/01-2015
PN EN 16005
PN EN 27888
PN EN 480-8
PN EN 50130-4:2002 + A2:2007
PN EN 54-2:2002 +A1:2007 cl. 9 using
PN EN 54-2:2002 +A1:2007, including: cl. 12.3 using
PN EN 60068-2-1: 2009 cl. 5.10, 5.11 using
PN EN 60068-2-1:2009 cl. 16. 9 and 16.10 using
PN EN 60068-2-1:2009 cl. 5.6
PN EN 60068-2-1:2009 cl. 10.5 using
PN EN 60068-2-1:2009 cl. 5.6.1.2 using
PN EN 60068-2-1:2009 cl. 5.6.2.1 and 5.6.2.2 using
PN EN 60068-2-1:2009 cl. 15.5 using
PN EN 60068-2-27:2009
PN EN 60068-2-27:2009 cl. 5.11 and 5.12 using
PN EN 60068-2-2:2009 cl. 5.5. using
PN EN 60068-2-30:2008 cl. 5.7 using
PN EN 60068-2-6:2002 cl. 5.18 using
PN EN 60068-2-6:2008 cl. 5.17 using
PN EN 60068-2-78:2013-11E cl. 5.6.3.1 using
PN EN 60068-2-78:2013E cl. 5.12 using
PN EN 60529:2003 cl. 16.8 using
PN EN 894-3+A1:2010 cl. 5.7. and 5.8 using
PN EN 894-3:2002
PN ISO 7150-1:2002
PN-84/B-06714/23
PN-84/B-06714/24
PN-87/B-02156 (without cl. 6.3)
PN-87/B-06077
PN-88/B-02855
PN-88/B-04481
PN-88/B-06079
PN-88/B-06250
PN-90/B-92270 cl. 3.3.3 to 3.3.11 and 3.4 and 3.5
PN-91/B-94400 cl. 5.4 and 5.5
PN-91/B-94408 cl. 3
PN-91/B-94408 cl. 6
PN-91/B-94461/02
PN-93/B-10027
PN-B 06714-34:1991+Az1:1997
PN-B-02867
PN-B-04500 1985
PN-B-06265
PN-B-24000:1997
PN-B-24002:1997
PN-C-04504:1992 cl. 4
PN-C-04963:1989
PN-EN 10080
PN-EN 1015-1
PN-EN 1015-10
PN-EN 1015-11
PN-EN 1015-11, cl. 8
PN-EN 1015-11, cl. 9
PN-EN 1015-12
PN-EN 1015-18
PN-EN 1015-19
PN-EN 1015-3
PN-EN 1015-4
PN-EN 1015-6
PN-EN 1015-7
PN-EN 1015-9
PN-EN 1021-1
PN-EN 1021-2
PN-EN 10218-1
PN-EN 10218-2
PN-EN 10223-7
PN-EN 10230-1, cl. 6.2
PN-EN 10230-1, cl. 6.3
PN-EN 10244-2
PN-EN 1026
PN-EN 1026 „N’’
PN-EN 1026 „N”
PN-EN 1027
PN-EN 1027 „N’’
PN-EN 1027 „N”
PN-EN 10346, Annex A
PN-EN 1052-1
PN-EN 1052-2
PN-EN 1052-3
PN-EN 1052-4
PN-EN 1052-5
PN-EN 1062-11
PN-EN 1062-3
PN-EN 1062-6
PN-EN 1062-7
PN-EN 1097-3
PN-EN 1097-7
PN-EN 1121
PN-EN 1125
PN-EN 1154
PN-EN 1191
PN-EN 12002:2010
PN-EN 12003:2008 „N”
PN-EN 12004-2
PN-EN 12045
PN-EN 12046-1
PN-EN 12046-2
PN-EN 12046-2 „N”
PN-EN 12085:2013-07
PN-EN 12085:2013-07 „N”
PN-EN 12086
PN-EN 12086 „N”
PN-EN 12087:2013-07 Methods 1A, 1B, 2A and 2B „N”
PN-EN 12087:2013-07 „N”
PN-EN 12088 „N”
PN-EN 12089, Method B
PN-EN 12090
PN-EN 12091:2013-07
PN-EN 12095
PN-EN 12101-1
PN-EN 12101-10:2007 +AC :2007, including: cl. 5.3 using
PN-EN 12101-10:2007 +AC :2007, including cl. 12.4 using
PN-EN 12101-2
PN-EN 12101-2 :2005
PN-EN 12101-2 :2017
PN-EN 12101-2:2005
PN-EN 12101-3
PN-EN 12114
PN-EN 12152
PN-EN 12153
PN-EN 12153 EAD 220021-XX-0402
PN-EN 12154
PN-EN 12155 „N”
PN-EN 12179
PN-EN 12190
PN-EN 12192-1
PN-EN 12194
PN-EN 12200-1
PN-EN 12209
PN-EN 12209:2005+AC:2006 cl. 6.8
PN-EN 12209:2005+AC:2006 cl. 6.2, 6.8, 6.11.2
PN-EN 12211
PN-EN 12211 „N’’
PN-EN 12211 „N”
PN-EN 12310-2
PN-EN 12311-1
PN-EN 12311-2
PN-EN 12316-1
PN-EN 12316-2
PN-EN 12317-1
PN-EN 12317-2
PN-EN 12320
PN-EN 12320:2013-04
PN-EN 12350-2
PN-EN 12350-3 „N”
PN-EN 12350-5
PN-EN 12350-6
PN-EN 12350-7
PN-EN 12365-2
PN-EN 12365-3
PN-EN 12365-4
PN-EN 12371
PN-EN 12372 „N”
PN-EN 12390-13
PN-EN 12390-3
PN-EN 12390-5
PN-EN 12390-6
PN-EN 12390-7
PN-EN 12390-8
PN-EN 124-1
PN-EN 12412-2
PN-EN 12424 “N”
PN-EN 12425 “N”
PN-EN 12426 “N”
PN-EN 12427 “N”
PN-EN 12427 „N”
PN-EN 12428:2013-06 „N”
PN-EN 12444 “N”
PN-EN 12444 „N”
PN-EN 12445
PN-EN 12445 “N”
PN-EN 12445 „N”
PN-EN 12445:2002 cl. 4.1, 4.2, 4.3, 4.4, 6,7
PN-EN 12453
PN-EN 12453 “N”
PN-EN 12453:2017
PN-EN 12467
PN-EN 12489 “N”
PN-EN 12489 „N”
PN-EN 12504-1
PN-EN 12566-1 „N”
PN-EN 12566-3 + A2:2013 „N”
PN-EN 12566-3 „N”
PN-EN 12566-3:2016-10 „N”
PN-EN 12600 „N”
PN-EN 12604
PN-EN 12604 “N”
PN-EN 12604 „N”
PN-EN 12604:2017
PN-EN 12605
PN-EN 12605 “N”
PN-EN 12605 „N”
PN-EN 12605:2002 cl. 5.1, 5.4
PN-EN 12664
PN-EN 12667
PN-EN 12667 „N”
PN-EN 12825
PN-EN 12833
PN-EN 12835
PN-EN 12843
PN-EN 12843:2008 +
PN-EN 12865
PN-EN 12865:2004 procedure A
PN-EN 12899- 3; CIE Technical Report 15
PN-EN 12899-1
PN-EN 12899-1, CIE 15 technical report
PN-EN 12899-1; CIE Technical Report 54.2
PN-EN 12899-3
PN-EN 12899-3; CIE Technical Report 15
PN-EN 12899-3; CIE Technical Report 54.2
PN-EN 12939:2002 cl. 1-6
PN-EN 12939:2002 cl. 1-6 „N”
PN-EN 12978
PN-EN 1300
PN-EN 13018
PN-EN 1303
PN-EN 13036-4
PN-EN 13049
PN-EN 13049 + PN-EN 12600
PN-EN 13049 „N”
PN-EN 13050:2011
PN-EN 13051
PN-EN 13057
PN-EN 1308:2008
PN-EN 13101
PN-EN 13111 „N”
PN-EN 13115
PN-EN 13116
PN-EN 13126-15
PN-EN 13126-16
PN-EN 13126-17
PN-EN 13126-3
PN-EN 13126-4
PN-EN 13126-7
PN-EN 13126-8
PN-EN 13126-8:2007 cl. 7.3.5, 7.5
PN-EN 13126-8:2007 cl. 7.3.6, 7.3.7, 7.3.8
PN-EN 13141-1
PN-EN 13141-1:2019-03, cl. 5.1, 5.2, 5.3
PN-EN 1324:2008 „N”
PN-EN 13310
PN-EN 13330
PN-EN 13364
PN-EN 1338
PN-EN 1338 Annex D
PN-EN 1338 Annex E
PN-EN 1338 Annex G
PN-EN 1338 Annex H
PN-EN 1338, Annex F
PN-EN 13381-1 „N”
PN-EN 13381-2 „N”
PN-EN 13381-3 „N”
PN-EN 13381-4 „N”
PN-EN 13381-5 „N”
PN-EN 13381-6 „N”
PN-EN 13381-7 „N”
PN-EN 13381-8 „N”
PN-EN 13381-9:2015-08
PN-EN 1339
PN-EN 1339 Annex D
PN-EN 1339 Annex E
PN-EN 1339 Annex G
PN-EN 1339 Annex H
PN-EN 1339, Annex F
PN-EN 13395-1
PN-EN 1340
PN-EN 1340 Annex D
PN-EN 1340 Annex E
PN-EN 1340 Annex G
PN-EN 1340 Annex H
PN-EN 1340, Annex F
PN-EN 13412
PN-EN 13467:2018-2
PN-EN 13468:2004 „N”
PN-EN 13469:2013-04 „N”
PN-EN 1346:2008
PN-EN 13470:2003
PN-EN 13472:2013-04 „N”
PN-EN 1348:2008 „N”
PN-EN 13501-1
PN-EN 13501-2
PN-EN 13501-2:2023-09
PN-EN 13501-3
PN-EN 13501-3:2026-01
PN-EN 13501-4
PN-EN 13501-5
PN-EN 13501-6
PN-EN 13523-7
PN-EN 13527
PN-EN 13529
PN-EN 1363-1
PN-EN 1363-1 „N”
PN-EN 1363-2
PN-EN 1363-2 EAD 350141-XX-1106 „N”
PN-EN 1363-2 EAD 350454-XX-1104 „N”
PN-EN 1363-2 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N”
PN-EN 1363-2 „N” EAD 350402-XX-1106 „N” EAD 350140-XX-1106 „N” EAD 350142-XX-1106 „N”
PN-EN 1364-1 „N”
PN-EN 1364-2 „N”
PN-EN 1364-3 „N”
PN-EN 1364-4 „N”
PN-EN 1364-5:2017-08
PN-EN 1365-1 „N”
PN-EN 1365-2 „N”
PN-EN 1365-3 „N”
PN-EN 1365-4 „N”
PN-EN 1365-5
PN-EN 1365-6
PN-EN 13658-1
PN-EN 13658-2
PN-EN 1366-1 „N”
PN-EN 1366-10 „N”
PN-EN 1366-2 „N”
PN-EN 1366-3 „N”
PN-EN 1366-4 „N”
PN-EN 1366-5 „N”
PN-EN 1366-6 „N”
PN-EN 1366-7 „N”
PN-EN 1366-8 „N”
PN-EN 1366-9 „N”
PN-EN 1367-1
PN-EN 13687-1
PN-EN 13755
PN-EN 1382
PN-EN 13823 „N”
PN-EN 13828
PN-EN 1383
PN-EN 13830 „N”
PN-EN 13830:2005 „N”
PN-EN 13859-1 „N”
PN-EN 13859-2 „N”
PN-EN 13892-2:2004
PN-EN 13892-3
PN-EN 13964 „N”
PN-EN 13964, Annex F „N”
PN-EN 13964, cl. 4.2
PN-EN 14019 „N”
PN-EN 14024
PN-EN 14135 „N”
PN-EN 14157
PN-EN 14195
PN-EN 14201
PN-EN 14231
PN-EN 1433 „N”
PN-EN 14351-1
PN-EN 14351-1 „N’’
PN-EN 14351-1 „N”
PN-EN 14351-2
PN-EN 14351-2 + PN-EN 12600
PN-EN 14353
PN-EN 14390
PN-EN 14428
PN-EN 14450
PN-EN 14470-2
PN-EN 14509
PN-EN 14509 *
PN-EN 14516
PN-EN 14527
PN-EN 14592
PN-EN 14592 „N”
PN-EN 14604:2006+AC:2009, including: cl. 5.10
PN-EN 14608
PN-EN 14609
PN-EN 14609 „N”
PN-EN 1462
PN-EN 14651
PN-EN 14688
PN-EN 14721
PN-EN 14782
PN-EN 14845-2 „N”
PN-EN 14846
PN-EN 14889-2 „N”
PN-EN 14891 „N”
PN-EN 14963 „N”
PN-EN 14963:2006 „N”
PN-EN 14975
PN-EN 15026
PN-EN 15037-1
PN-EN 15037-2
PN-EN 15037-4
PN-EN 1504-2
PN-EN 15080-12
PN-EN 15183
PN-EN 15254-2 „N”
PN-EN 15254-3
PN-EN 15254-4
PN-EN 15254-5 „N”
PN-EN 15254-6
PN-EN 15254-7
PN-EN 15269-1
PN-EN 15269-10
PN-EN 15269-11
PN-EN 15269-2
PN-EN 15269-20
PN-EN 15269-3
PN-EN 15269-5
PN-EN 15269-7
PN-EN 1527
PN-EN 1542
PN-EN 15534-1
PN-EN 15650, Annex C
PN-EN 15684
PN-EN 15685:2025-05
PN-EN 15725
PN-EN 15725 CEN/TS 16459
PN-EN 15820 „N”
PN-EN 15882-1
PN-EN 15882-4:2012E „N”
PN-EN 16005:2013
PN-EN 1602:2013-07
PN-EN 1603
PN-EN 16034
PN-EN 16034:2014
PN-EN 1604
PN-EN 1604 *
PN-EN 1605
PN-EN 1607
PN-EN 1609:2013-07 „N”
PN-EN 1628
PN-EN 1629
PN-EN 1630
PN-EN 1634-1 „N”
PN-EN 1634-2 „N”
PN-EN 1634-3 „N”
PN-EN 16361
PN-EN 16516 „N”
PN-EN 16516+A1:2020-12
PN-EN 16733:2016-06
PN-EN 16758:2021-10
PN-EN 16864:2017-10
PN-EN 17020-4
PN-EN 1744-1
PN-EN 1745
PN-EN 1751
PN-EN 17685-1:2023-08
PN-EN 179
PN-EN 1793-1 „N”
PN-EN 1793-2 „N”
PN-EN 1793-3 „N”
PN-EN 1794-1 „N”
PN-EN 1794-2 „N”
PN-EN 1794-2:2011 Annex A
PN-EN 1794-3
PN-EN 1847
PN-EN 1873 EAD 220021-XX-0402
PN-EN 1873 „N”
PN-EN 1873 „N” EAD 220021-00-0402
PN-EN 1873 „N” EAD 220021-XX-0402
PN-EN 1873+A1:2016-03
PN-EN 1873:2009 cl. 5.9 „N”
PN-EN 1873:2009 „N”
PN-EN 1881
PN-EN 1899-1 „N”
PN-EN 1906
PN-EN 1925
PN-EN 1926
PN-EN 1928 „N"
PN-EN 1928 „N”
PN-EN 1931 „N”
PN-EN 1932
PN-EN 1935
PN-EN 1935 EAD 020001-XX-0405
PN-EN 1936
PN-EN 196-1
PN-EN 196-10
PN-EN 196-2
PN-EN 196-3
PN-EN 196-5
PN-EN 196-6
PN-EN 196-6 using standard 1097-7
PN-EN 198
PN-EN 1993-1-3
PN-EN 1995-1-1
PN-EN 20140-10
PN-EN 20140-3:1999 „N”
PN-EN 22479
PN-EN 251
PN-EN 26891:1997 + EAD 130186-00-0603
PN-EN 26891:1997 + TR016:2002
PN-EN 28510-1
PN-EN 29052-1
PN-EN 29053:2011
PN-EN 29469
PN-EN 311
PN-EN 356 „N”
PN-EN 380
PN-EN 384
PN-EN 40-3-1
PN-EN 40-3-2
PN-EN 40-3-3
PN-EN 40-4
PN-EN 40-5
PN-EN 40-6
PN-EN 40-7
PN-EN 408
PN-EN 413-2
PN-EN 438-2
PN-EN 451-1
PN-EN 451-2
PN-EN 477
PN-EN 478
PN-EN 479
PN-EN 480-10
PN-EN 480-12
PN-EN 480-14
PN-EN 480-2
PN-EN 480-5
PN-EN 480-6
PN-EN 480-8
PN-EN 50130-4:2002 + A2:2007
PN-EN 50130-4:2012+ A1:2015-03
PN-EN 50130-4:2012+A1:2015-03
PN-EN 50130-4:2012+A1:2015-03 cl. 5.6.5 using
PN-EN 50130-4:2012+A1:2015-03 cl. 10.9 using
PN-EN 50200
PN-EN 50399 „N”
PN-EN 50576
PN-EN 50577:2016-02
PN-EN 508-1
PN-EN 514
PN-EN 516 „N”
PN-EN 520 „N”
PN-EN 54-11:2004 +A1:2006 including cl. 4.4.1. using
PN-EN 54-12:2015-05 including cl. 5.6.1.1 using
PN-EN 54-16:2011, including: cl. 13.3 using
PN-EN 54-17:2007, including cl. 5.4 using
PN-EN 54-18:2007+ AC:2007
PN-EN 54-21:2009, including: cl. 7.3 using
PN-EN 54-4:2001 + A1:2004 + A2:2007, including cl. 9.5, using
PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 10.4 using
PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 16.15 using
PN-EN 54-4:2001 + A1:2004 + A2:2007 cl. 10.10 using
PN-EN 54-5 +A1:2018-11, including cl. 5.6.1.1 using
PN-EN 54-7:2018-11, including cl. 5.9 using
PN-EN 60068-2-1:2009
PN-EN 60068-2-1:2009 cl. 9.6 and 9.14 using
PN-EN 60068-2-1:2009 cl. 12.5 using
PN-EN 60068-2-1:2009 cl. 5.5 using
PN-EN 60068-2-1:2009 cl. 5.10 and 5.11 using
PN-EN 60068-2-27:2009 cl. 5.16. and 5.17. using
PN-EN 60068-2-27:2009 cl. 5.6.4.3 and 5.6.4.4 using
PN-EN 60068-2-27:2009 cl. 5.9 using
PN-EN 60068-2-27:2009 cl. 5.15 and 5.16 using
PN-EN 60068-2-2:2009
PN-EN 60068-2-2:2009 cl. 12.13 and 12.14 using
PN-EN 60068-2-2:2009 cl. 5.4 using
PN-EN 60068-2-2:2009 cl. 5.6.1.2 using
PN-EN 60068-2-2:2009 cl. 5.6.2.1 using PN–EN 60068-2-30:2008 cl. 5.6.2.2 using
PN-EN 60068-2-2:2009 cl. 5.9 using
PN-EN 60068-2-30:2008
PN-EN 60068-2-30:2008 cl. 5.12 using
PN-EN 60068-2-30:2008 cl. 5.6 using
PN-EN 60068-2-42:2004
PN-EN 60068-2-42:2004 cl. 5.13 using
PN-EN 60068-2-42:2004 cl. 5.14 using
PN-EN 60068-2-42:2004 cl. 5.6.4.1 using
PN-EN 60068-2-42:2004 cl. 5.9 using
PN-EN 60068-2-42:2004 cl. 5.12 and 5.13
PN-EN 60068-2-42:2004 cl. 5.8 using
PN-EN 60068-2-6:2008
PN-EN 60068-2-6:2008 cl. 9.9 using
PN-EN 60068-2-6:2008 cl. 5.6.3.2 using
PN-EN 60068-2-6:2008 cl. 5.6.5.1 using
PN-EN 60068-2-6:2008 cl. 10.8 using
PN-EN 60068-2-6:2008 cl. 16.14 using
PN-EN 60068-2-6:2008 cl. 5.12 using
PN-EN 60068-2-6:2008 cl. 5.13 using
PN-EN 60068-2-6:2008 cl. 5.14
PN-EN 60068-2-6:2008 cl. 12.8. using
PN-EN 60068-2-6:2008 cl. 15.8 using
PN-EN 60068-2-75:2015-01
PN-EN 60068-2-75:2015-01 cl. 9.8 and 9.15 using
PN-EN 60068-2-75:2015-01 cl. 5.10 and 5.11 using
PN-EN 60068-2-75:2015-01 cl. 10.7 using
PN-EN 60068-2-75:2015-01 cl. 15.7 and 15.15 using
PN-EN 60068-2-75:2015-01 cl. 16.12 and 16.13 using
PN-EN 60068-2-75:2015-01 cl. 12.7 and 12.9 using
PN-EN 60068-2-75:2015-01 cl. 5.6.4 using
PN-EN 60068-2-78:2013-11
PN-EN 60068-2-78:2013-11 cl. 9.7 using
PN-EN 60068-2-78:2013-11 cl. 12.10. using
PN-EN 60068-2-78:2013-11 cl. 5.13 using
PN-EN 60068-2-78:2013-11 cl. 5.7 using
PN-EN 60068-2-78:2013-11 cl. 5.8 using
PN-EN 60068-2-78:2013-11 cl. 10.6 using
PN-EN 60068-2-78:2013-11 cl. 12.6 using
PN-EN 60068-2-78:2013-11 cl. 15.6 using
PN-EN 60068-2-78:2013-11 cl. 16.11 using
PN-EN 60068-2-78:2013-11 cl. 10.11 using
PN-EN 60068-2-78:2013-11E cl. 5.6.3.1 using
PN-EN 60332-1-1
PN-EN 60332-1-2 „N”
PN-EN 60332-1-3
PN-EN 60332-2-1
PN-EN 60332-2-2
PN-EN 60529:2003
PN-EN 60529:2003 cl. 12.15 using
PN-EN 60529:2003 cl. 15.4 using
PN-EN 60529:2003 cl. 7.6 using
PN-EN 60529:2003+AC:2017-12
PN-EN 60695-11-2
PN-EN 607
PN-EN 60754-1
PN-EN 60754-2 „N”
PN-EN 61000-4-11:2007+A1:2017-09
PN-EN 61000-4-2:2011
PN-EN 61000-4-3:2007+ A1:2008 + A2:2011 + IS1:2009
PN-EN 61000-4-4:2010
PN-EN 61000-4-4:2013-05
PN-EN 61000-4-5:2014-10+A1:2018-01
PN-EN 61000-4-6:2014-04
PN-EN 61000-4-6:2024-03
PN-EN 61000-4-8:2010
PN-EN 61034-1
PN-EN 61034-2 „N”
PN-EN 680
PN-EN 695
PN-EN 717-1 „N”
PN-EN 744
PN-EN 772-1
PN-EN 772-11
PN-EN 772-13
PN-EN 772-13 + PN-EN 772-3
PN-EN 772-14
PN-EN 772-16
PN-EN 772-2
PN-EN 772-20
PN-EN 772-21
PN-EN 772-9
PN-EN 81-58
PN-EN 822:2013-07
PN-EN 822:2013-07 „N”
PN-EN 823:2013-07
PN-EN 823:2013-07 „N”
PN-EN 824
PN-EN 825:2013-07
PN-EN 826:2013-07 „N”
PN-EN 827
PN-EN 845-2 „N”
PN-EN 846-10 „N”
PN-EN 846-11
PN-EN 846-14 „N”
PN-EN 846-2 „N”
PN-EN 846-4 „N”
PN-EN 846-5 „N”
PN-EN 846-6 „N”
PN-EN 846-7 „N”
PN-EN 846-8 „N”
PN-EN 846-9 „N”
PN-EN 872
PN-EN 933-1
PN-EN 947
PN-EN 948
PN-EN 948 „N”
PN-EN 949
PN-EN 950
PN-EN 951
PN-EN 952
PN-EN IEC 60332-3-10
PN-EN IEC 60332-3-21
PN-EN IEC 60332-3-22
PN-EN IEC 60332-3-23
PN-EN IEC 60332-3-24
PN-EN IEC 60332-3-25
PN-EN IEC 61000-4-11:2020-11+AC:2020-12+AC:2023-01
PN-EN IEC 61000-4-3:2021-06
PN-EN ISO 10052
PN-EN ISO 10077-1 „N”
PN-EN ISO 10077-2 „N”
PN-EN ISO 10140-2
PN-EN ISO 10140-2 „N”
PN-EN ISO 10140-3
PN-EN ISO 10140-3 „N”
PN-EN ISO 10211
PN-EN ISO 10304-1:2009
PN-EN ISO 10304-1:2009/AC:2012
PN-EN ISO 10456
PN-EN ISO 105-B02
PN-EN ISO 10523
PN-EN ISO 10523:2012
PN-EN ISO 10563 „N”
PN-EN ISO 10591 „N”
PN-EN ISO 10666
PN-EN ISO 10666, cl. 4.2.1
PN-EN ISO 10666, cl. 4.2.2
PN-EN ISO 10666, cl. 4.2.3
PN-EN ISO 1133 „N”
PN-EN ISO 1133-1
PN-EN ISO 11358-1
PN-EN ISO 11431 „N”
PN-EN ISO 1182 „N”
PN-EN ISO 1183-1 „N”
PN-EN ISO 11925-2 „N”
PN-EN ISO 12567-1 „N”
PN-EN ISO 12567-2 „N”
PN-EN ISO 12567-2:2006 „N”
PN-EN ISO 12572
PN-EN ISO 12623 „N”
PN-EN ISO 12624:2023-02
PN-EN ISO 12628
PN-EN ISO 12629 „N”
PN-EN ISO 12631
PN-EN ISO 12631 *
PN-EN ISO 140-4:2000
PN-EN ISO 140-5:1999
PN-EN ISO 140-6:1999
PN-EN ISO 140-7:2000
PN-EN ISO 140-8:1999
PN-EN ISO 14125 „N”
PN-EN ISO 14589
PN-EN ISO 1460
PN-EN ISO 1461 „N“
PN-EN ISO 14688-1:2018-05
PN-EN ISO 1519
PN-EN ISO 1520
PN-EN ISO 15630 1
PN-EN ISO 15630-1
PN-EN ISO 15630-2
PN-EN ISO 15630-3
PN-EN ISO 16000-9 „N”
PN-EN ISO 16032
PN-EN ISO 16283-1
PN-EN ISO 16283-2
PN-EN ISO 16474-3
PN-EN ISO 16535 „N”
PN-EN ISO 16535:2019-08 Methods 1A, 1B, 2A and 2B „N”
PN-EN ISO 16546
PN-EN ISO 1716 „N”
PN-EN ISO 175
PN-EN ISO 175 „N”
PN-EN ISO 178
PN-EN ISO 17892-10:2019-01
PN-EN ISO 17892-11:2019-05
PN-EN ISO 17892-12:2018-08+A2:2022-08
PN-EN ISO 17892-1:2015-02
PN-EN ISO 17892-1:2015-02/A1:2022-11
PN-EN ISO 17892-2:2015-02
PN-EN ISO 17892-3:2016-03
PN-EN ISO 17892-4:2017-01
PN-EN ISO 17892-5:2017-06
PN-EN ISO 17892-7:2018-05
PN-EN ISO 17892-8:2018-05
PN-EN ISO 17892-9:2018-05
PN-EN ISO 179-1
PN-EN ISO 18098
PN-EN ISO 1856
PN-EN ISO 2178
PN-EN ISO 2178 „N“
PN-EN ISO 22479
PN-EN ISO 2360
PN-EN ISO 2360 „N“
PN-EN ISO 2360 „N”
PN-EN ISO 23997
PN-EN ISO 2409
PN-EN ISO 24341
PN-EN ISO 24342
PN-EN ISO 24346
PN-EN ISO 2702
PN-EN ISO 2808
PN-EN ISO 2808 „N“
PN-EN ISO 2808 „N”
PN-EN ISO 2808:2008 cl. 5.5.7 and 5.5.8
PN-EN ISO 2812-1
PN-EN ISO 2813 „N”
PN-EN ISO 2815
PN-EN ISO 2931
PN-EN ISO 29465
PN-EN ISO 29465 „N”
PN-EN ISO 29466 „N”
PN-EN ISO 29468
PN-EN ISO 29469
PN-EN ISO 29469 „N”
PN-EN ISO 29470
PN-EN ISO 29767 „N”
PN-EN ISO 29768
PN-EN ISO 306
PN-EN ISO 3210
PN-EN ISO 3231:2000
PN-EN ISO 3497:2004
PN-EN ISO 3506-1
PN-EN ISO 354 „N” excluding cl. 7.3.1
PN-EN ISO 4623-1
PN-EN ISO 4623-2
PN-EN ISO 4624
PN-EN ISO 4628-1
PN-EN ISO 4628-10
PN-EN ISO 4628-2
PN-EN ISO 4628-3
PN-EN ISO 4628-4
PN-EN ISO 4628-5
PN-EN ISO 4628-6
PN-EN ISO 4628-7
PN-EN ISO 4628-8
PN-EN ISO 4892-2
PN-EN ISO 4892-2 „N”
PN-EN ISO 4892-3
PN-EN ISO 527-1 „N”
PN-EN ISO 527-1:1998
PN-EN ISO 527-2
PN-EN ISO 527-2:1998
PN-EN ISO 527-3
PN-EN ISO 527-3:1998
PN-EN ISO 5470-1
PN-EN ISO 580
PN-EN ISO 5815-1:2019-12
PN-EN ISO 604
PN-EN ISO 6259-1
PN-EN ISO 6270-1
PN-EN ISO 6270-2
PN-EN ISO 6272-1
PN-EN ISO 6506-1
PN-EN ISO 6507-1
PN-EN ISO 6508-1
PN-EN ISO 6878
PN-EN ISO 6892-1 Method B
PN-EN ISO 6892-1, Method B
PN-EN ISO 6892-1, Method B
PN-EN ISO 6940
PN-EN ISO 6941
PN-EN ISO 6946
PN-EN ISO 6988:2000
PN-EN ISO 7389
PN-EN ISO 7390 „N”
PN-EN ISO 7438
PN-EN ISO 7724-2
PN-EN ISO 7783
PN-EN ISO 8256 „N”
PN-EN ISO 8339 „N”
PN-EN ISO 8340 „N”
PN-EN ISO 846 „N”
PN-EN ISO 8497 „N”
PN-EN ISO 868
PN-EN ISO 898-1
PN-EN ISO 898-2
PN-EN ISO 8990
PN-EN ISO 8990:1998
PN-EN ISO 8993
PN-EN ISO 8994
PN-EN ISO 9046 „N”
PN-EN ISO 9047 „N”
PN-EN ISO 9053-1:2019-01
PN-EN ISO 9227
PN-EN ISO 9239-1 „N”
PN-EN ISO 9967 „N”
PN-EN ISO 9972:2015-10
PN-EN ISO10590 „N”
PN-EN-ISO 15630-3
PN-ENV 1187:2004 „N” Methods 1, 2 and 3
PN-ENV 13381-3 „N”
PN-ENV 13381-4 „N”
PN-ENV 13381-7 „N”
PN-IEC 60331-21
PN-IEC 60331-23
PN-IEC 60331-25
PN-ISO 15705 „N”
PN-ISO 34-1:2007
PN-ISO 6060 „N”
PN-ISO 7801
GDDKiA test procedure PB/1/18
GDDKiA test procedure PB/2/18
Report CEN/TR 14823 „N”
TR026:2016
TS 1187